PowerPC :: Finding Motherboard Information?
Nov 24, 2010
I have Powermac G4 AGP (M7628LL/A) that has the AGP slot without the 'power-supplying' tab at the front of the slot. Therefore my NVIDIA GeForce2 MX video card (ADC/VGA) will only enable me to use the VGA outlet, and not the ADC. I have two Studio Display Monitors (M7649) and cannot use them.
I need to know (1) What other monitors will work with this G4 (in case I cannot fulfill #2), and most importantly (2) Which motherboard can I replace this one with that will enable me to use the video card in it's fullest?
View 4 Replies
ADVERTISEMENT
Nov 17, 2006
While taking apart ibook to replace harddrive on grapghite 466 , I ran into trouble. In taking out the backlight cable, the whole plastic receptor (little white plasatic at J4) on the motherboard came off as well. This is a little part (1/4 x 1/8inch). I can't tell if it was soldered on or just slips on the motheboard since tiny bits of plastic broke off. Can someone tell me if/how this can be repaired.
View 3 Replies
View Related
Jul 14, 2007
can you make this: fit where thisis? fitting g3 motherboard?
View 7 Replies
View Related
Jun 24, 2008
I was recently given a non working G5 dual 2.5ghz machine. It is a quad core machine with the Delphi liquid cooling system. After some investigating I found it had a coolant leak. All the fans and lights come on as well as the bootup �chime�. I think (hoping) that the motherboard and power supply are still good. My question is this:
Can I use different processors on this motherboard? Lets say a dual 2.5ghz non-quad core processor assembly. Am I making sense? I am very new to the Mac world and would appreciate any help on this issue.
View 14 Replies
View Related
Jul 26, 2007
I bought 4 G4 towers of eBay for �85.. none have Hdd's so havent tried them out yet (two also have no graphic cards) I got a mix of ram size and speed (pc100/pc133) however thats not my question
Next to the ram slots theres a red light that comes on, is this normal? I've tried to do some research on it and some people say it is, others say it isnt.
I plan to sell them off again on ebay but I did it mainly as a project to keep the G4's alive. Any suggestions on graphic cards (cheap ones too)?
View 7 Replies
View Related
Sep 15, 2007
I'm looking into replacing a motherboard on my newphews iBook G4. It's an early 2004 Series. I'm wondering if these Ibooks have interchangable motherboards, i.e. 1.0ghz vs 1.2ghz, 12inch screen vs the 14inch screen. I've done much work on IBM compatible laptops and these interchange pretty easily...but these MAC's are all new to me. I'm looking to get a busted up one off ebay and replace it for him for pretty cheap...
View 1 Replies
View Related
May 22, 2008
Ok, my problem is as the title states. Why is this happening? My motherboard had 8gb slots and is compatable with 8gb ram. I installed 8 dimms of this ram I bought from newegg: [URL]
View 11 Replies
View Related
Dec 15, 2008
Is it possible to upgrade the mac mini g4 to a intel processor or some other processor thats faster? Or motherboard upgrades? Well i appericate the help, and i hope there is an upgrade
View 10 Replies
View Related
Jun 18, 2007
Anyone know? And if there is one where it is? Also: can the motherboard be reset using software?
View 2 Replies
View Related
Mar 7, 2008
Recently I didn't do my research, and I purchased a Quicksilver power supply to put on a Gigabit machine. I noticed it had four extra pins which look like some of the ones they use to power processors in some PCs (tho I've come to find this is for the ADC port). I dug a little deeper (Googled "powermac_g4.pdf") and found out that some of the pins have differences between the Gigabit PS and the Quicksilver PS.
Has anyone else had an experience like this? Will the PS work without any wirecutting or do I need to get a new one?
View 2 Replies
View Related
Oct 2, 2009
I have a replacement motherboard (G4 MDD 1.25 dual) coming in and even though I have a very talented and technical friend coming by to help, it'd sure be nice to have some instructions on removing the current motherboard and the subsequent install of the newer one. Mine is having kernel panics about 98% of the time on attempted startups and I've tried (along with the Apple Store Genius Bar) everything I know how to do or have Googled and read. I think it's perhaps a USB bus issue.
I did manage to get it to boot from the Apple Hardware Test and everything passed. And, one of the USB connectors on the back of the machine is damaged, so I figure a complete motherboard swap should eliminate all possibilities except for maybe the CPU which seemed to pass. So back to the original query. Are there docs somewhere to guide one in the removal of the motherboard? I run a recording studio with this machine and I'm dead in the water! I am looking into either a new MacIntel or possibly a used G5 to replace it with.
G4 dual 1.25 MDD Mac OS X (10.4.11) Recording Studio
View 3 Replies
View Related
Feb 18, 2010
could anyone please provide more information about the RAID controller? Could I continue to use my Adaptec 5805 when switching from a PC to a Mac Pro?
View 1 Replies
View Related
Jan 1, 2011
I keep having a popup (left center screen) that sort of looks like a small folder with the word easyNAT at the top. It only last a fraction of a second so I can't screen capture or even study it closely (it's taken a long time just to determine it says easyNAT).
View 3 Replies
View Related
Aug 15, 2009
Has anyone installed Windows 7 on your Mac using Parallels and Snow Leopard?
View 1 Replies
View Related
Jun 12, 2010
Well I received my refurbished 27" i5 about two weeks ago. Since taking it out of the box it has consistently rebooted itself and sometimes even shuts down where I can't power it back up unless I remove the cord from the machine and reinsert it. I tried everything to troubleshoot, zapped PRAM, Reset SMC Controller, logged times after removing USB components, ran multiple quick and full hardware tests. Finally I gave one last attempt and wiped my drive clean and reinstalled snow leopard...Not a single one of these measures worked.
So today I finally called applecare for the first time ever. THey were extremely helpful, didn't try to walk me through troubleshooting steps since they understood that I already tried them all. They instead stated that since Im at around 28 days since ordering (may 14) that I can have it repaired or they can claim the one I got as DOA and ship me a brand new one. Once I receive the new one I ship the old one back. They also bumped up my delivery to overnight since I have been putting up with the reboots and trying to troubleshoot myself.
View 11 Replies
View Related
Apr 29, 2010
I have taken some measurements from my PSU and since I have not seen this sort of info posted anywhere else and it is not in the service manual I thought I'd share it here.
refer attached
Note ** The voltage on pin 4 varies according to the temperature of the PSU and ranges between 1.7V and 2.5V - Higher voltage = lower temperature.
View 2 Replies
View Related
Jul 25, 2006
Is it just a server? and how much do they go in retail shops / stores??
I would like to find out as i have a mac mini, g5 quad and a macbook.. just a fan of apple mac lol. I do alot of webdesigning for many clients, could the xserve be a way to i don't know host these clients or something if it is a webserver?
View 7 Replies
View Related
Jun 24, 2012
I have my dad's old mac book pro and am wondering if it is possible to change the information to my information. For example when I emailed my wife an invitation on icalendar my dad got it as well on his email.
Info:
Mac Pro
View 1 Replies
View Related
Sep 24, 2006
Ok I've looked around the net and the fastest dual G4 I see is a 1.8 GHZ upgrade to the 7447 chip that has 512KB of L2. I've seen a single 2.0GHZ g4 updrade but will we ever see a dual 2 GHZ g4? More importantly is freescale or whoever owns the chips now are going to make faster G4s for those still not willing to let go of their g4s (myself included going strong after 4 years) I would like to hold on to my dual 1.25GHZ longer but a 2HZ+ dual G4 seems promising for Final Cut Pro and Photoshop.
View 24 Replies
View Related
Dec 30, 2006
The 64 bit 33MHZ PCI slots on a G4 are running at 133MBps correct? Also I want to know if all 4 of them are running fully inpendent from each other? So if I have a RAID card in there I can get the full 133MBps and will not be robbed of speed if I have a neighboring Firewire 800 or SATA RAID next to it.
View 2 Replies
View Related
May 13, 2007
I'm looking to buy a portable hard drive for my g4 powerbook. the USB power from the G4 powerbooks isn't strong enough to support some hdds.
View 3 Replies
View Related
May 20, 2008
I am wanting to get a case to go around the outside of my powerbook mainly to protect the aluminum case from scratches, Are there any cases for the powerbook? I have seen a few for macbook but nothing for powerbooks.
View 1 Replies
View Related
Feb 26, 2009
will OS 10.5 from a macbook work on a powerbook g4 disk 1 2z619-6167-a disk 2 2z691-6147-a
printed on disk macbook
my powerbook g4 is 1.5ghz with 1.25 gb :ram
View 1 Replies
View Related
Jan 4, 2011
Does anyone know the mac pro motherboard manufacturer. Mine is a made to order 2x2 3ghz quad core (1,1) 2006 model.
View 7 Replies
View Related
Apr 2, 2008
I am considering buying a new Mac Pro. Can anyone tell me that if I buy one with single CPU, can I upgrade it later by adding another CPU? In other words, do I get a dual CPU motherboard or not?
View 24 Replies
View Related
Jul 4, 2008
In the PC world, most latest motherboards support either SLI or CrossFire. How about the MacPro's motherboard?
View 15 Replies
View Related
Oct 27, 2010
I would like to find a LAN instant messenger for ppc machines.
I tried powerpop, but this one crashes everytime. After, i tried quickpopup, which is working. The only problem is when sending messages, it makes a new window and...
So, i've not found a LAN instant messenger yet. Could someone have an idea? I don't and won't use leopard.
View 2 Replies
View Related
Aug 13, 2006
I am trying to purchase an Original Airport Card to put in my iBook G3 however, I am blown away by the prices. Does anyone know a good Card that will work in this machine?
View 4 Replies
View Related
Aug 20, 2006
I know the drill, I'm new here, but I have read that the majority of people here think apple care is a good investment, and I agree. But here is the spin.
I have about 2 weeks to decide whether I want apple care on my ibook G4 14" 1.42. It'll run me just under $300 (CDN). Thing is, with all the new improvements out there, is it even worth it for me to buy it? Like, if my laptop broke, I was thinking of just wanna splurging on a new macbook (not that it wouldn't hurt the wallat of course.
Another major point, the laptop from what I've noticed on ebay is only actually worth like $900. So I'm paying 1/3 of the value for apple care (since all the new upgrades have depreciated my laptop).
View 4 Replies
View Related
Nov 30, 2006
Does anyone know the Brand or product number for the hardrive in a 15" powerbook 1.25ghz?
View 4 Replies
View Related
