Mac Pro :: RAID 1 Controller Finding Information?
Feb 18, 2010could anyone please provide more information about the RAID controller? Could I continue to use my Adaptec 5805 when switching from a PC to a Mac Pro?
View 1 Repliescould anyone please provide more information about the RAID controller? Could I continue to use my Adaptec 5805 when switching from a PC to a Mac Pro?
View 1 RepliesI have been searching for a good raid controller with ports for both internal & external drives. Does this exist on the mac side?
View 14 Replies View RelatedCan anyone comment on the Highpoint RAID controller Apple is selling?
[URL]
I'm mostly looking for bulk (non-redundant) storage using an eSATA port multiplied enclosure. Nothing too fancy required. Are there any cheaper basic eSATA multi-link options available? (2006 MP) My biggest concern is good driver support. I see some SI/Sonnet cards that have questionable driver support especially with Snow Leopard.
I have a macpro with 4 x 1tb drives
Is it possible to get a highpoint raid controller and put those 4 drives in a raid 5 array (and then create partitions inside that array) - or do you need to have 1 drive by itself for the operating system, and then create a raid array using the remaining 3 drives?
Lastly, are the highpoint 3500 series a decent card? and fully compatible?
I am using the first generation Mac Pro, and I wanted to ask some questions related to SATA HDD and The Raid configuration. I currently have 4 HDDs in the internal bay and 2 external in the enclosure using the USB2 connection. The performance is not that great, and I am sick of adding more HDDs through USB2 which offers really slow performance. I was thinking of building a dedicated NFS File Server using Linux, but before I did that, I wanted to ask if there are solutions out there within Apple Mac Pro without going through this route.
I currently have 6 and probably need to buy 3 more in very short time period. also, all of my HDDs are 750g. Simply put, I am wondering if there are like 16 or 24 port SATA Raid Controller that I can buy for MacPro. Since the MacPro can't house all of them inside, I need to use external enclosures for some of these HDDs, connected through eSATA or whatever means possible without jeopardizing the performance. I am also interested in Raid 5 setup, so, that support in raid card is mandatory.
Can I install a Raid Controller and connect say two drives to it, specially for windows? Will it be bootable? Or perhaps even connect the iPass of the four internal bays to an Adaptec 5405 and get a separate cable for my Mac Drive. Will both be bootable? What if I just want to boot Windows for now? I sometimes need to convert my early 2008 Mac Pro into a rather beefy Windows workstation and the lack of HW Raid is rather irritating.
View 1 Replies View RelatedDoes anyone know if it's possible to have two sets of striped drives using a single hardware RAID controller? I'm looking at the ARC-1210 and it seems like you can have more than one set of striped drives, but I'm not positive. My plan is to have two small SSDs set up for the boot drive and two HDDs for storage, each pair set up with RAID 0. Can this be accomplished using a single controller? Note: I'd just use OS X's software RAID but I need to keep the cores freed up for computation. I'm not concerned with redundancy--just speed.
View 2 Replies View RelatedMy iMac has been crashing a lot lately and finally it's hard drive just up and failed. I have been doing hourly Time Machine backups to a concatenated RAID set (2 USB drives of 1 TB each). However, I think the iMac crashed while backing up and hosed the RAID controller.I've since plugged the two disks of the RAID into my MacBook Pro to see if I can repair them. I can see the individual disks of the RAID in Disk Utility. I can even verify and repair them. But i can't do that with the RAID in the sidebar, and it won't mount on the desktop. When I try to eject it from the DIsk Utility file menu, it says disks are in use.
I'm pretty sure my data on the two disks is intact, but I can't seem to get the RAID to mount as the single concatenated set on a desktop, which makes it inaccessble. Is there a way to repair the JBOD RAID without losing all my data, so I can then restore from the latest backup to my hosed iMac?
Info:iMac, Mac OS X (10.7.2)
Im looking for a controller card for the mac in my signature there are a load of them on ebay/maplin etc - but none of them say mac compatible, will this be a problem or can i use them anyway?
Bit of advice as i have 2 120 gb hdds to put in the mac (+ The 60gb stock)
I was given a mac book that wouldn't show anything on screen, apple said it had bad logic board. I fixed that by torching the gpu die, and everything is perfect. Except the computer will not charge that battery, says battery 0% "not charging". I tried all the usual, so does anyone know exactly were the smc controller is on the motherboard? I have some ideas And all the cables from the mag safe connecter to the battery, appear good.
View 8 Replies View RelatedThis weekend I starting getting the clicking sound of death from my boot drive. Today I ran out and got a Western Digital Caviar Black 2TB HDD that is SATA/300 drive. Are the higher read/write speeds supported by the MP 3,1 controller?
As I write this, I've got CCC cloning the entire drive and praying that it doesn't fail mid-copy.
I have Powermac G4 AGP (M7628LL/A) that has the AGP slot without the 'power-supplying' tab at the front of the slot. Therefore my NVIDIA GeForce2 MX video card (ADC/VGA) will only enable me to use the VGA outlet, and not the ADC. I have two Studio Display Monitors (M7649) and cannot use them.
I need to know (1) What other monitors will work with this G4 (in case I cannot fulfill #2), and most importantly (2) Which motherboard can I replace this one with that will enable me to use the video card in it's fullest?
I keep having a popup (left center screen) that sort of looks like a small folder with the word easyNAT at the top. It only last a fraction of a second so I can't screen capture or even study it closely (it's taken a long time just to determine it says easyNAT).
View 3 Replies View RelatedHas anyone installed Windows 7 on your Mac using Parallels and Snow Leopard?
View 1 Replies View RelatedGoing to setup a raid using apples utitlity to get a raid 0 of two 640 blacks for my 2008 MP. I have adequate back up, including time machine and two separate back up discs that I keep information on. My macbook pro also has the same information with its own time machine back up.
So I have to wipe my original 640 so the new raid can be created I assume. Should I restore from time machine to put my info back on after creating the raid setup? Is there an easier way, one that doesn't require me copying all my information over?
Well I received my refurbished 27" i5 about two weeks ago. Since taking it out of the box it has consistently rebooted itself and sometimes even shuts down where I can't power it back up unless I remove the cord from the machine and reinsert it. I tried everything to troubleshoot, zapped PRAM, Reset SMC Controller, logged times after removing USB components, ran multiple quick and full hardware tests. Finally I gave one last attempt and wiped my drive clean and reinstalled snow leopard...Not a single one of these measures worked.
So today I finally called applecare for the first time ever. THey were extremely helpful, didn't try to walk me through troubleshooting steps since they understood that I already tried them all. They instead stated that since Im at around 28 days since ordering (may 14) that I can have it repaired or they can claim the one I got as DOA and ship me a brand new one. Once I receive the new one I ship the old one back. They also bumped up my delivery to overnight since I have been putting up with the reboots and trying to troubleshoot myself.
I have taken some measurements from my PSU and since I have not seen this sort of info posted anywhere else and it is not in the service manual I thought I'd share it here.
refer attached
Note ** The voltage on pin 4 varies according to the temperature of the PSU and ranges between 1.7V and 2.5V - Higher voltage = lower temperature.
decided to pick one of these up and see what its like ?
could be pretty cool if it works well want to use raid 1 for my boot and going to see how quick it does raid 0
curious if anyone has one yet ? will let you know next week some time my thoughts
Can anyone recommend a external box that can take 4-6 hard drives and do a Raid5 style setup? Preferably connected by firewire or esata to a Macpro.
View 2 Replies View RelatedCan anyone recommend a SATA RAID card for a G5? I'm looking for a hardware solution as opposed to using a software RAID controller.
View 1 Replies View RelatedApple states that the new 2009 RAID card "Requires Mac Pro (early 2009) and Mac OS X v10.5.6 or later." Why? Is there any reason it won't work in an older Mac Pro (2007)? Aside from the increase in cache size (256MB-->512MB) what is the difference?
View 1 Replies View RelatedIs it just a server? and how much do they go in retail shops / stores??
I would like to find out as i have a mac mini, g5 quad and a macbook.. just a fan of apple mac lol. I do alot of webdesigning for many clients, could the xserve be a way to i don't know host these clients or something if it is a webserver?
I have a PowerMac G5 and need to purchase an internal RAID card to create a RAID 1 mirror of the system drive... one that will allow me create a Hardware RAID 1 mirror, not software RAID through OS X.
View 2 Replies View RelatedI just bought a Guardian Maximus RAID1 kit and I have two 1TB drives in it. I'm using it over Airport Extreme as an airdisk (mac osx 10.6.2)
My question is simply: am I running a risk by partitioning it into two partitions? Should I ever have to rebuild the failed disk (which I understand is really simple with the Guardian Maximus) - will it have trouble doing two partitions? I'm using one 500gb partition for time machine and one 500gb partition as redundant itunes/media.
I have a Lacie ext hard drive with 2 x 250gb HD that were one RAIDed into a single 500gb HD. I ran this update Lacie firmware update: http://www.lacie.com/support/drivers...r.htm?id=10053 And now my HD will only show up as two separate HDs of 250gb instead of a single RAID HD of 500gb.
View 6 Replies View RelatedI have a new Mac Pro Quad 2.93 with the Mac RAID card installed with four 1TB drives setup in a RAID 5 array. When creating the volumes in the RAID utility, you can not edit them, resize, etc. If one large volume is created in the RAID utility, you can then partition that one volume using the Apple Disk Utility, which then allows you to resize if needed.
View 1 Replies View RelatedI'm using the software RAID right now. Everything is set as RAID 10. I want to move to a RAID card� if I keep it as RAID 10 will I still need to redo everything?
View 1 Replies View Relatedive put 4 of the hitachi 1tbs in my new mac pro.. and i really want to do Raid on them eventually.. and buy the pricey apple raid card.. i'll do it.. but speed wise:
How fast is a Sata connection straight from HD>Motherboard... ~75mb/s?
Is the Raid 5 config with all those drives much faster... around ~110mb/s?
Do you know if there is anyway to get a 5th drive into the raid 5 array? using the ODD space.. or some externals too... i need as much as space as possible...
And boot camp wont work with raid card anymore? I was thinking to have the startup disc be a raptor to increase speed on the apps, how would it integrate with the raid card, etc
I have a RAID 0 set up with two 1.5TB HDs. I am doing some reorganizing and want to take all the data on the RAID 0 and move it to one of the hard drives in the RAID 0 and create to single drives. Is there any way of moving all the data from a RAID 0 onto one of the HDs?
View 4 Replies View RelatedI am planning on getting a 2010 MP when they come and have a question about it. I am 90% sure that with my budget, I will not be able to after a RAID card. I am wondering if software RAID would be alright or if it's so bad it's not worth doing. Also, there is small chance that I could buy a RAID card later on, how would I install it? I will be using it for 3D animation with Maya and some zbrush modeling. Also I will be doing some Photoshop and illustrator and maybe some gaming on win 7 boot camp. Feel free to list any other pros and cons about either a software RAID or hardware RAID, I wana make sure I have all the details before making a final decision on it.
View 24 Replies View Related