I'm looking into replacing a motherboard on my newphews iBook G4. It's an early 2004 Series. I'm wondering if these Ibooks have interchangable motherboards, i.e. 1.0ghz vs 1.2ghz, 12inch screen vs the 14inch screen. I've done much work on IBM compatible laptops and these interchange pretty easily...but these MAC's are all new to me. I'm looking to get a busted up one off ebay and replace it for him for pretty cheap...
View 1 RepliesI have a replacement motherboard (G4 MDD 1.25 dual) coming in and even though I have a very talented and technical friend coming by to help, it'd sure be nice to have some instructions on removing the current motherboard and the subsequent install of the newer one. Mine is having kernel panics about 98% of the time on attempted startups and I've tried (along with the Apple Store Genius Bar) everything I know how to do or have Googled and read. I think it's perhaps a USB bus issue.
I did manage to get it to boot from the Apple Hardware Test and everything passed. And, one of the USB connectors on the back of the machine is damaged, so I figure a complete motherboard swap should eliminate all possibilities except for maybe the CPU which seemed to pass. So back to the original query. Are there docs somewhere to guide one in the removal of the motherboard? I run a recording studio with this machine and I'm dead in the water! I am looking into either a new MacIntel or possibly a used G5 to replace it with.
G4 dual 1.25 MDD Mac OS X (10.4.11) Recording Studio
While taking apart ibook to replace harddrive on grapghite 466 , I ran into trouble. In taking out the backlight cable, the whole plastic receptor (little white plasatic at J4) on the motherboard came off as well. This is a little part (1/4 x 1/8inch). I can't tell if it was soldered on or just slips on the motheboard since tiny bits of plastic broke off. Can someone tell me if/how this can be repaired.
View 3 Replies View RelatedI currently have a 40gb HD on my iBook G4 and was wondering if there is a way to install a new harddrive without voiding my warranty (I have over 1.5 years left on it). Also, where is the best place to buy new HDs?
View 7 Replies View RelatedWe are now trying to replace the hard drive with an 80 Gb one. The problem is that when I try to clone the existing HD over to the new one, CCC gets to the point of copying the applications folder and can't go any farther. I assume this means the HD in the iBook is well and truly dead, Worst case I'll have to install everything from the restore discs, although that will set her machine back some--I think she has OS 10.2 discs and the machine is actually on 10.3.9.
View 1 Replies View RelatedSome guy is selling a 500mhz G3 ibook for 200, the only problem is it has a broken screen. How much would it cost to replace, and is this a good price?
View 4 Replies View RelatedI have a chip on the side of my g4 ibook and would like to change the whole case to something other than the standard glossy white. I recall there was a company that made really colorful (red, blue, pink) Macs, but can't find anything online. Well, I found one company [URL] but they sell the machine not just a case. Anyway, I think they were painted, but by now I figure there has to be a company offering a way to customize Macs. does anyone know of one?
View 4 Replies View Relatedso i accidentally cracked my ibook g4 screen i went to an applestore and they gave me a site where i could find replacements a new screen costs $380! ide rather use that to buy a new laptop but anyways, does anyone know any sites that would have replacements screens for about $100 to $200? or somewhere i can buy a broken ibook g4 with a good screen
View 3 Replies View RelatedMy iBook is almost 3 years old and I think the battery is just dead. It holds a charge of maybe 20 minutes max and it's gotten to the point where I'm just gonna give in a buy a new batterry. Can I just buy any "14" iBook G4" batterry off of eBay or any site other than from Apple direct(retails $129)? Should I be looking a particular model number for the battery (A1080) or the laptop? I see batterries selling for $80 on eBay....
have u guys done this? I dont want to end up with something that won't work just because I bought it at a non-Apple site...
I'm trying to fix my dc in board myself. I figured out that was the problem and took it to the genius bar to confirm. I ordered the part and have directions from ifixit.com. Can I do this? I have absolutely no experience with this sort of thing, but I do follow directions well. A friend told me that some mac consultants won't even attempt this repair, which made me very uncomfortable. Can anybody who's done this repair speak to the difficulty and what it would be like for a person who's never even seen the inside of a computer? I don't have the money right now to have somebody else do it, so should I just put it up until I do, or take a shot at it? I really love this little laptop and hoped that I could save it...
View 1 Replies View RelatedI purchased what I thought was an identical replacement screen used for my ibook G4 1.2 ghz. When attempting to install myself, I started to hook the new screen in and noticed I have what I believe is to be 2 power connectors (the connectors with the round pencil lead size connector) where the old screen only had 1. The data connectors were identical.
Do I have the wrong screen, do I use only 1.
I have an old iBook G4 14" (from about 2004 or 2005) that was just replaced by a MacBook. The hinge on the screen is pretty much broken and the screen looks pretty terrible. I'm thinking about installing a distro of Linux on it and using it as a file server or media server and connecting it to an external display, but I would like to have the keyboard and mouse readily available and would not like to have issues with overheating because the lid is closed. Is there a way I can completely remove the screen (including the hinge) and have it still be functional?
View 4 Replies View RelatedI'm internal-HD-shopping for a friend, and want to make sure I know: What terminology will identify drives I can put in this iBook? I know it's 2.5"--what else should I make sure of? Also--any kinds that would be better than others? It's a 14" G3 with Firewire and DVD-ROM. "New" as G3s go.
View 4 Replies View RelatedMy old 1.33 12" iBook needs a new drive. I need some advice regarding the power switch cord. This says the power cord is soldered to the board: [URL] I can leave the top case connected by the power switch cord if required. Perhaps I could tape the case down during work on the back side and rotate the connected case left during work on the front side. This is slightly beyond my skill level. Great advice found here during searches. I plan to be very slow, methodical, and conscious of screws/step.
View 2 Replies View Relatedafter 4 years my ibook g4 14" has a problem. my hard drive needs to be replaced. i took it to the genius bar yesterday and they gave me a referal to a store in my area that is certified to work on macs... but they don't sell hard drives in-house since they just started up a few weeks ago. does anyone have a suggestion for a decent replacement internal hard drive? i'm not looking for anything high-end. i just need a cheap, reliable drive to get me through about another year when i can get a new mac. if this matters much... i do use my ibook for a small amount of video editing, graphic design, etc... but only when work has to come home w/ me.
*the guys at the repair place did suggest a few... but they were all in the $250-$350 range... i was hoping to keep it around $150 or lower since i've been doing fine w/ my 40gb for 4 years now and i have 2 externals that total 1.75 tb. they said i could find some for that price elsewhere... but they only ordered from one place when they needed to... and none were available (in my $ range) there*
once I get my hard drive replaced, how do I go about installing OSX on the new HD? I mean, the HD won't have an OS at all, so do I just insert my install disks, boot off them, and then install OSX on the new HD? Or will the computer boot up all? I will transfer everything over from my USD backup drive- yes, I know that will take more than a little while... (coincidentally, the Seagate Barracuda is LOUD). I'm only asking because the place where I want to get the replacement itself done charges like 30 bucks to do it, but ONLY for the physical replacement and no data transfer. Hopefully the software side I'll be able to handle...
View 2 Replies View Relatedi replaced the motherboard on my dual 867MHz G4 MDD.the computer turns on now, and i did a fresh 10.4.11 install...but i noticed that it says "Dual 800" instead of "Dual 867" in my "About This Mac" now. i typed "sysctl hw.cpufrequency" in the terminal and discovered that it is actually running at 800MHz, and not 867MHz.
View 8 Replies View Relatedcan you make this: fit where thisis? fitting g3 motherboard?
View 7 Replies View RelatedI was recently given a non working G5 dual 2.5ghz machine. It is a quad core machine with the Delphi liquid cooling system. After some investigating I found it had a coolant leak. All the fans and lights come on as well as the bootup �chime�. I think (hoping) that the motherboard and power supply are still good. My question is this:
Can I use different processors on this motherboard? Lets say a dual 2.5ghz non-quad core processor assembly. Am I making sense? I am very new to the Mac world and would appreciate any help on this issue.
I have Powermac G4 AGP (M7628LL/A) that has the AGP slot without the 'power-supplying' tab at the front of the slot. Therefore my NVIDIA GeForce2 MX video card (ADC/VGA) will only enable me to use the VGA outlet, and not the ADC. I have two Studio Display Monitors (M7649) and cannot use them.
I need to know (1) What other monitors will work with this G4 (in case I cannot fulfill #2), and most importantly (2) Which motherboard can I replace this one with that will enable me to use the video card in it's fullest?
I bought 4 G4 towers of eBay for �85.. none have Hdd's so havent tried them out yet (two also have no graphic cards) I got a mix of ram size and speed (pc100/pc133) however thats not my question
Next to the ram slots theres a red light that comes on, is this normal? I've tried to do some research on it and some people say it is, others say it isnt.
I plan to sell them off again on ebay but I did it mainly as a project to keep the G4's alive. Any suggestions on graphic cards (cheap ones too)?
Ok, my problem is as the title states. Why is this happening? My motherboard had 8gb slots and is compatable with 8gb ram. I installed 8 dimms of this ram I bought from newegg: [URL]
Is it possible to upgrade the mac mini g4 to a intel processor or some other processor thats faster? Or motherboard upgrades? Well i appericate the help, and i hope there is an upgrade
View 10 Replies View RelatedAnyone know? And if there is one where it is? Also: can the motherboard be reset using software?
View 2 Replies View RelatedRecently I didn't do my research, and I purchased a Quicksilver power supply to put on a Gigabit machine. I noticed it had four extra pins which look like some of the ones they use to power processors in some PCs (tho I've come to find this is for the ADC port). I dug a little deeper (Googled "powermac_g4.pdf") and found out that some of the pins have differences between the Gigabit PS and the Quicksilver PS.
Has anyone else had an experience like this? Will the PS work without any wirecutting or do I need to get a new one?
My nephew was kind enough to give me an out-of-warranty iBook G4 12" as a gift - he has long been a Mac fan and wants me to experience the love first hand. Of course, no good deed goes unpunished, and as he was powering it up to give me the fifty cent tour, the LCD died - just died. Backlight was fine, but all we saw for images was squiggly gry and black lines in the center of the panel.
"It's probably the cable." the guys at both the Apple Store Genius Bar *and* I-fixit told us, but of course, neither place sells the LCD cable as a replacement part, and as you undoubtedly know, iFixit's price for a replacement LCD is upward of $400, and Apple won't even sell you one - although they WILL replace it for you, for about $650 out of warranty. I had resigned myself to letting it sit until I could save up the money to score a display on eBay, where they go for anywhere from $75 to $220 - much more reasonable, but still pricey when you consider that the rest of the machine could give up the ghost at any time....................
I have a G3 iBook and just the other day the display stopped working. There were no signs of the display going bad, it's just went. Am I able to boot the iBook via Target Disk Mode on my PowerBook and run the iBook Hardware Test CD on it? Also, can I reboot my PowerBook and choose the iBook as the startup volume?
I know how to do Target Disk Mode but the latter I'm not sure about.
My brother's iBook G4 (800Mhz, First Rev) has completely splattered itself and we're getting a new Macbook for him under insurance. My iBook G3 (White, 900Mhz G3..the last G3 Rev of the iBook) has a failing hard drive.
Now, could I swap out those two drives, at least to recover stuff? And is there a specific method of opening up the iBook G4 so that I don't break stuff (I've already messed with my G3..and ended up with a dozen extra screws ^_^
Mainly the aim is to salvage the hard drive and swap them out; replacing my faulty iBook G3 one with the iBook G4 one which is perfectly fine.
My iBook G4 power supply failed and I'm awaiting a replacement. In the mean time, can I use the power supply from my iBook G3 with the iBook G4?
View 1 Replies View RelatedRight now I have a G3 iBook (900 MHz, 640 MB RAM, Combodrive, 40 GB HDD). I'm looking at a G4 iBook (1.2 GHz, 768 MB RAM, Superdrive, 60 GB HDD).
How much faster would the G4 be over my G3. I figure that after selling my G3, the G4 would only be another $200ish on top of it. Would this be worth it?
