I have a G4 Powerbook and I wanted to do a clean installation. I have my old my old mac mini dvds and thought I could use them on the powerbook. It says that it can not install that system in that machine. Am I missing something? Do I need a special DVD made for laptops?
View 5 RepliesI have an old Macbook via 2007 and I'm trying to update my operating system (currently OS 10.5.8) to Snow Leopard, but the disk is not reading in the disk drive. And unfortunately, Snow Leopard is only on a DVD, it can't be downloaded.I figure I have 2 choices:
1) take it in and spend $49 to have them do diagnostics and then tell me they probably need to replace the superdrive
2) I could buy an external optical drive. But I would need to know which one would be compatable with my old *** Macbook.
Info:
Macbook
So i put the OSX disk in (10.3) and when i make it boot from the disk the mac logo pops up then it shifts a quarter inch to the right and freezes. I then tried booting it normally and pressed the install button now it boots off the CD automatically with the same result and can't be turned off. Is there an emergency disk remove thing for a powerbook G4? And is there a way to reformat my computer without the disk?
View 1 Replies View RelatedI am a proud owner of a MAC powerbook G4 for just over 3 years now. It runs MAc OX 10.3. For the last two weeks i have been having issues. First it started to be very slow. Then it would not boot up and i got a blue screen. I ran the file system checks from the OS X and it complained about the volume being bad and said it could not be repaired. i decided to reinstall the whole thing and did a complete erase and install. IT booted up fine. The software updater asked permission to update which i agreed.
After the update was over, the software updater had more updates. I guessed that it was probably giving me updates in the chronological order. During a particular update, it gave the blue screen and "please restart" ... and when i rebooted it did not come up... just a blue screen... i verified the filesystem using the diagnostic tool and it again said it was corrupt .... I have done this twice now and i have a feeling it happened when i was updating the same batch of software updates.... sometimes my software updater would crash everytime i launch it.....
I set up a 32g partition for windows xp pro. Loaded the disk and formated the partition to FAT. Hold option at startup and load windows. Upon loading windows i get the following message "There is no disk in the drive. Please insert a disk into drive." I have tried leaving the xp disk in, I have tried taking it out before loading windows and putting it in afterwords, nothing works. I can not eject disk while in windows.
View 1 Replies View RelatedIs it possible to use a 10.6 disk that was included with my purchase of a MacBook to perform a clean install of snow leopard on my 2 year old Mac Pro? I remember back in the system 9 days all we had to do was a key combination(command-shift-K methinks?) at the install screen to use the system discs on other systems...
View 7 Replies View RelatedI want to reformat my 2.33gh MBP. The problem i have is i dont have the original install discs that came with the computer. I am currently running snow leopard, which i installed with an upgrade disk. I borrowed a snow leopard disk from a friend who got a new imac recently and when i try boot from the disk to reformat it just says i cant install the software on my computer
View 2 Replies View RelatedI have just bought a new iMac with Lion preloaded and have been told that Apple no longer provide a system disc with new computers.Is this right? How can you reload the system, if it all goes pear-shaped?
View 4 Replies View RelatedI am trying to do clone the system only from my current hard drive to a smaller internal SSD. Tried with SuperDuper but the resulting drive was not bootable even though it had the system folder. Has anyone done this successfully?
View 3 Replies View Relatedfinally got a mac, i've been flip floping between wanting everything from ibooks to unibody macbook pros. But i found a early 08 macbook on craiglist for $650, and took that.So I'm using it now and i have a few questions. I've been searching but cant find answers to everything. 1. the macbook didnt come with a restore disk, I'm i right to think i can get one from apple for ~$35?
View 11 Replies View RelatedI was having problems with Incorrect Valance error message, ran my utilities' repair as advised. I noticed that my PowerPC G4 shows the OS as 10.3.9. Went to look at the disk that came with my Mac that I carry in my case - It says it's Version 10.4.2. Should I try to install this on my Hard drive? If I do, will it cause me any problems/will I lose anything? I have moved not that long ago, and almost all of my stuff is still boxed up, so no back up drive to mirror my drive to. I can't remember if I had to install the OS on my Mac when I bought it in '05 or not, but the disk that has the OS says it contains a later OS version than what my mac's "About this Mac" states.
View 4 Replies View RelatedI bought a used Power Mac G-5 OSX 10.4.11 (machine model Power Mac 9.1) My situation is, that it came without the back up disk. I need them in case of a crash, etc., but for now I need to get the classic OS9 installed onto my computer.Is there a way I can buy another set of system back up CDs?
View 7 Replies View RelatedHow do i stop my system from asking me to force quit applications?
View 1 Replies View RelatedWhere can I get another install disc for MacBook Pro?
Info:
MacBook Pro, Mac OS X (10.7.2), new another install disc
While I was partitioning my disk, disk utility froze, along with my whole system. So I was forced to reboot.
Now my Mac thinks there's an 80 gb chunk of data somewhere (the data that would have been my partition), but I can't find it. How do I regain the lost space?
I've tried using disk utility already.
View 24 Replies View RelatedRecently I archived and installed leopard from tiger. Since then sometime there is a message that comes up telling me I need to restart my computer in all different languages. Also when I try to verify and repair my disk permissions, this is what shows up:
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", ....
I've removed my old hard drive from my macbook (which I have sold) and am about to buy a new 13"mbp. Unfortunately I couldn't buy the new machine before selling the old, so I am presented with a problem. I could just install the disk in the new machine (its a 320gb 7200rpm, so in the long-term I'll be doing this in any case), but I'll want iLife 09 on there and its possible there are system files that are required for the new machine that wont be on my old system (10.5.7, from a 2007 macbook).
The main thing is that I want all my files, and applications and settings, plugins etc., on the new mbp, but because I don't have the old laptop I cant use migration assistant. The disk is in a usb enclosure currently. So, do I install the old disk and then try and update iLife, or will I run into problems? Or, can I transfer my applications and all their settings via some other means? I have a (full!) lacie firewire external which I could perhaps employ.
I want to restore and recover OSX & Logic 8 and the software i use with it (Apogee Maestro,UAD Quad & Waves plug-ins) to a new boot disk. I have both a back up of the main OS drive on a drive with Time Machine and a disk copy of the main drive (on another) as i had it before the boot disk crashed. My question is which is the best option to take when restoring the OS etc? As I have heard that there is a couple of bugs and issues when restoring via Time Machine. Is restoring via the disk copy a simple procedure? Or, should i reinstall everything completely from scratch and copy back the receipts and authorizations perhaps? Can you point me towards the best link/method to get my setup back on track? i'm using an apogee symphony pci card
View 1 Replies View RelatedI have a brand new 15 inch i5 mbp. I put a cd in to rip it onto itunes. It was really scratched. Now the computer ate my disc (I know I can restart and it will be ok, that's not my question). Shouldn't my brand new mbp be able to cope with a scratched disc? It seems a bit bizarre that the entire computer would freeze just because a disc is scratched. Also, it seems like it takes much longer to rip cds than it does on my pc. It doesn't just seem like it. It takes almost twice as long.
View 2 Replies View RelatedI'm getting a new Mac for some software development. More than likely it will arrive with the disk formatted as "case preserving but not case sensitive". This has bitten me more than once where one directory contains two files whose names are the same, ignoring case.
If I reformat the disk as "case sensitive" and reinstall MacOS, (1) will that work, and (2) if it works, are there any "gotchas" to be aware of later on?
I have an Imac 5,1 2.16 Ghz Intel Core 2 Duo running Mac OS X version 10.4.11 and am fairly new to Mac. I made the cardinal sin of not leaving all of the pc world behind me when I made the switch to Mac and one day after examining my software, I noticed what appeared to be an excessive amount of folders containing only 1 or 2 photos apiece, scattered throughout the system. I got the bright idea to "tidy up " a bit so I created a folder where I could easily find it, and moved the single pix there and then deleted the original folders. My mistake was soon obvious, when the slideshows I had created in Iphoto would not work and some pictures were missing.
My problem is this: I bought the computer used and it came with nothing but the main unit , the mouse, and keyboard. I found a fix to the Iphoto problem, but it requires the original system disk which I do not have. I do however have a factory Mac OS X Tiger disc from an old powermac G3 I have. I was wondering if that disc would work to reinstall Iphoto? If so, are there any special instructions to get it to work? And lastly, if it doesn't work what are my next best options?
My son made me a DVD-r of mp3 files and a dvd on his new mac. I cannot get it to read on my system. Other CDs and dvds work fine so know disk drive is ok. I have tried the disk on windows based computers and it works fine. Is my computer too old to read or do you have a suggestion on how to read? When I insert the disk, nothing comes up on the desktop to click on to read.
View 3 Replies View RelatedI recently came across an old iMac G3 by a dumpster (It is perfectly functional, the fact that I found it by the dumpster has nothing to do with the problem). I brought it up to find out that every user created on the computer is password protected. I've been trying to get past it, but it's impossible. I can't afford an install CD, resetting the PRAM and the PRU doesn't do a thing, and Open Firmware is a pain. Is there any way to get into the iMac without having to buy a disc or go all around town trying to find the original owner so I can get his passwords?
Info:
iMac G3 (CRT Slot-loading), Mac OS 9.2.x
My system keeps on saying that my start-up disk is full
Info:iMac
I have an MBA that has been completely wiped clean including the recovery partition. The system did not come with any disk or instructions to recover. What is the next step to get back to OSX.
View 2 Replies View Relatedi have powerbook g4 macos x version 10.5 i need to update my software to 10.8 but the problems its the partition of mac os x is too small
how to increase the system disk partition
Info:
null, Mac OS X (10.5)
I purchased a LaCie Little Big Disk 200GB. It's an external HDD with two 2,5" 7200RPM hdd's paired as a raid 0 system.Great on paper, horribly risky in practice.So, *stupid me* started using this disk as a backup device for some important data. Of course the disk has started to malfunction. When I plug it in, there's this terrible clicking noise and it no longer mounts.I have already voided the warranty as I opened it up thinking/hoping it was a faulty connection.
View 24 Replies View RelatedI have a 1 TB LaCie Big Disk Extreme 2 that is actually made up of 2 500GB drives. It failed on me. I have most of it backed up but there are a few things I would like to recover. I tested another power cord and it didn't work. So I talked to a few people and they said that if I bought a new seagate controller board that matches my 500GB drives identically I would be able to get the data off one drive at a time. There is some good and some bad. When I tested the new controller board on each drive (one at a time only because I only have one new controller board) they both started up normally! Success I thought.. but no.. Both Leopard and XP said "drive needs to be formatted" or "initialized".
View 21 Replies View RelatedI need to get an iBook G3's system profile (CPU speed, memory, drive config., etc.), but have no video (black screen). Hard drive is ok. Can this be done in Target Disk Mode somehow? I have NO external monitor.
View 1 Replies View Related