OS X :: LaCie Big Disk Extreme Failure Occurs In My System
Jul 6, 2009
I have a 1 TB LaCie Big Disk Extreme 2 that is actually made up of 2 500GB drives. It failed on me. I have most of it backed up but there are a few things I would like to recover. I tested another power cord and it didn't work. So I talked to a few people and they said that if I bought a new seagate controller board that matches my 500GB drives identically I would be able to get the data off one drive at a time. There is some good and some bad. When I tested the new controller board on each drive (one at a time only because I only have one new controller board) they both started up normally! Success I thought.. but no.. Both Leopard and XP said "drive needs to be formatted" or "initialized".
View 21 Replies
ADVERTISEMENT
Sep 3, 2008
I have a 1T lacie "big disk" that makes a loud whirring noise, then a clack, over and over again. It never gets itself mounted. I am thinking about pulling the disks and plugging them into a another machine, or disk enclosure. Is there any point to trying this or is the fact that I have 4 250G disks tied together to show up as a single 1T drive preclude any heroics?
View 8 Replies
View Related
Jan 6, 2010
My Big Disk Extreme (1TB) was working great, until the other day, while on it started making a repetitive "Click" sound. Im assuming this is somehow related to the drive spinning and whatnot, but the problem is it wont mount on the desktop, nor can i find any way to "reset" the hdd.When on, the blue light works just fine, it does not turn Orange or anything. The drive just clicks and wont do anything...
View 2 Replies
View Related
Jan 3, 2008
I purchased a LaCie Little Big Disk 200GB. It's an external HDD with two 2,5" 7200RPM hdd's paired as a raid 0 system.Great on paper, horribly risky in practice.So, *stupid me* started using this disk as a backup device for some important data. Of course the disk has started to malfunction. When I plug it in, there's this terrible clicking noise and it no longer mounts.I have already voided the warranty as I opened it up thinking/hoping it was a faulty connection.
View 24 Replies
View Related
May 10, 2010
I could use your expert advice. I have a Lacie D2 250GB hard drive hooked up via FW800 to a Dual 1.83Gzh G5 Powermac. Recently the Lacie drive has been writing really really slow. I tested it with a Kona Speed Utility and saw that was only writing between 4MB and sometimes only 1MB/sec. Is this drive about to fail? I ran disk utility on it and hit repair disk and it says the disk health is fine. I ran diskwarrior on it and it said there was a major error in the directory and as I replaced it, Diskwarrior quit in the middle of it.
View 3 Replies
View Related
May 5, 2009
I installed AirPort Extreme for my iMac to replace an old wireless router. Now my external LaCie 'Time Machine' backup drive doesn't show up in peripherals when I try to reinstall it. (It went away somehow) It only tries to lead me to the wireless Apple product.
View 4 Replies
View Related
Apr 11, 2009
I am running my Lacie 500gb (porsche design) wirelessly through an Apple Airport Extreme and accessing them on my Powerbook G4. Lacie is connected to AE through USB, and has 377gb worth of data, no partitions.What happened: I tried to put a very small .srt file on the hard drive, but it kept giving an error essage, "Cannot copy file blah blah... file name too long or contains characters unreadable" or something to that effect. After a number of attempts it FINALLY appeared to load.Problem: Now when I access my Lacie wirelessly all file and folder icons disappear after a millisecond, but the drive info still says 377gb used. If I connect to the Lacie through USB the icons are as they should be, except the problem .srt file only appears as the name with no icon. If I click on the .srt file that one file disappears, so I can't delete it, open it, or do file repair on it.
View 3 Replies
View Related
Oct 20, 2010
Does anyone here have personal hands-on experience with hacking a Lacie Ethernet disk? I heard it's possible to make them run as a extremely cheap server.
View 1 Replies
View Related
Jun 9, 2012
I connected Lacie Backup Disk and used Time Machine to select the disk. But then a warning popped up telling me to eject the disk properly next time before disconnecting it, even though I never disconnected the device. Now time machine does not even recognize it.
Info:
Mac Pro, Mac OS X (10.7.4)
View 2 Replies
View Related
Dec 19, 2010
After some warning signs in the last few weeks (not ejected properly, drive icon disappearing from desktop) my Lace BigDisk Extreme 1TB Drive is now seemingly gone forever. No backup.
Not ejected properly warnings were inappropriate as I never unplugged it ... icon disappearing - I simply pulled to power supply pin out of the back and re-inserted it and it came back. Now it-s gone. Lacie has sent a new power supply to me but it did not solve the problem ... the power supply brick light blinks very faintly .. when I pull the p/s pin out of the drive, the power supply brick lights up solid green.
This type of failure seems to be a common occurence. Anyways, I need to recover the data if possible. My options seem to be:
1. Pay a data recovery service $600.
2. Buy the current version of the Lacie that I have and swap out the disks, so that I can at least get to the data. I believe that the current version is the:
d2 Quadra Hard Disk 1 TB eSATA/FireWire800/FireWire400/USB 2.0 .. does anyone know for sure?
3. Buy some other lower priced enclosure with usb or firewire interface to get to the data (but I don't have a clue what to buy)
Does anyone know if either options 2 or 3 will work and which would be the least painful to deal with? I'm not a hardware guy
Lastly, I cannot get the screw off of the back of my dead Lacie drive .. it appears to be a small phillips head but it turns out it's not. What tool do I need to get it off? Or is it opened up some other way?
If anyone could guide me thru the steps to recovery it would be much appreciated!
View 8 Replies
View Related
Jan 8, 2011
I want to exchange files between MacPro and Pc windows 7 64 bit. In Mac I have partitioned my LaCie 4big Quadro with 1 partition FAT32 DOS, GPT principle. Here Mac has no problem to copy my files to this partition, but my Pc cannot read this partition. The Pc recognizes the LaCie without problems in the Disk Utility, but cannot read it. I also cannot give this disk any name ((F: etc) in the pch disk utility.
I have seen en earlier thread on the seme topic, but not the problem when the pc cant read it.
suggest two partitions, one fpr Mac and one for Pc. OK - but how do I copy files from one to another.
View 2 Replies
View Related
Mar 15, 2010
I bought the LaCie Little Disk 320gb about a year ago and it has been working fine till recently..
The problem that I have is that the laptop that I use (Powerbook G4) doesn't recognize the HD anymore..
I have tried all cables (both firewire's and the usb) but nothing works..
I did try it on multiple computers (macbook's / imacs and even some windows computers) not one did recognize it.
(well the windows computer I used it on did recognize it but it cant open it and Windows Explorer stops working till you pull out the HD).
The only think I can think of is that I pulled out the HD to many times without safely removing it first..
I got a lot of data on the HD and I'd (offcourse) like to get it back,
I haven't been to the store yet (going somewhere this week).
View 5 Replies
View Related
Dec 16, 2009
I recently replaced my Netgear router with Apple's Airport Extreme Station. I had the Lacie ethernet mini disk connected to the Netgear ethernet port and it worked just fine.
With Apple's station, however, it just cannot see the mini disk. The green lights on both ends of the ethernet cable port are on. System Pref's Network shows the mini disk not connected or cable unplugged. Fiddling with it one day (mostly on the System Pref side) the disk appeared as an SMB in the Finder (as before) and I was able to access it. But just that one time only. Can't access it since.
View 3 Replies
View Related
Sep 11, 2009
When I used Disk Utility to verify my LaCie disk, I received this message:
Disk Utility stopped verifying "LACIE" because the following error was encountered:
The underlying task reported failure on exit.
View 4 Replies
View Related
May 18, 2009
I have to send my iMac 27 back to apple for replacement (flickering screen issue) and I would like to erase my personal information. How do I do that on a Mac? I have a Lacie Drive connected via Firewire 800 and have been using Time Machine for backups. I also want to make sure that I have a complete backup as well. I am new to Mac OS X
Information:
iMac 27 & MacBook Pro
Mac OS X (10.6.2)
View 9 Replies
View Related
May 7, 2010
I used SuperDuper to create a mirror image of my SSD boot drive on one of the partitions on the external drive. Thinking it wise to actually check to see if the partition would boot, I used System Preferences to point to the new boot drive and restarted the ol' 2008 8x2.8 Mac Pro.
All seemed well with the startup from the new boot device. But when I tried to go to System Preferences on this system, the app failed without ever initializing a window.
View 4 Replies
View Related
Feb 19, 2009
Odd stufff, I have a 500 gig Lacie ext HD that my user uses on her Vista machine...
I am setting up a replacement for the Vi$ta machine, which is a 24 inch imac.
I plugged in the ext HD and nothing happened after I powered on the ext HD.
I checked disk utility and it showed up but as a 2TB size ext HD...
I unplugged the Lacie and plugged it back in and all the info showed up correctly.
But ALL the buttons under "First Aid" are greyed out so I cant verify permissions, disk, or repair disk or permissions.
Information:
imac 24 inch
Mac OS X (10.5.8)
View 2 Replies
View Related
Mar 8, 2012
In both Snow Leopard and Lion, I am experiencing start-up disk failures that cannot be repaired by disk utility. Does anyone know what can cause this?
Info:
MacBook-iPhone, iOS 4
View 5 Replies
View Related
Apr 24, 2012
I take a chainsaw to my Mid 2009 Mac Book Pro.It had been pretty faultless until recently when it started being slow to boot and generally just hanging for a short periods, and then carrying on as normal.Then I had major errors on the 500gb hard disk, which prevented the machine from booting. Using disk utilty, I decided that I needed to wipe and start again. Fortunately much of the data was backed up. I re-installed and all was well for a short while. However, about 3 weeks later I had the same issue, and so I decided to replace the hard disk, even though it did not seem to have any errors or SMART warnings.I put in a new 750Gb disk, and all was well for a few months. Last week I was working abroad in Norway. I rebooted into boot camp to run some software and then back again into OSX and then disaster struck again. (Strangely my boot camp partition has had no issues at all on either hard disk). I couldn't boot into OSX and the emergency recovery (I'm on Lion) came up. Disk Utilitiy told me that the it couldn;t repair the drive.
Now after two hard drives I am a little stuck. The incovenince is massive as I am a working all over the place and rely on the my normally trusty MBP. I am almost ready to replace the MBP, but in truth I can't really afford to do so (in these economic times).Can anyone point me as to why this may be happening. I am hoping it may be bad Ram (easier to replace than a board), but can anyone point as to how to diagnose it. The apple hardware test program I remember for the pre-OSX days doesn;t seem to available now.
Info:
MacBook Pro, Mac OS X (10.7.3)
View 8 Replies
View Related
Sep 1, 2009
I have just loaded the new operating system snow leapord on my Imac and now am having MAJOR problems with my Quickbooks 2009 for mac. Is anyone experiencing a high frequency of Quickbooks quitting during operations and getting a crash failure?
View 2 Replies
View Related
Sep 3, 2014
I just used Disk Utility to make a backup of a MBA (65GB) onto a 500GB external drive (Restore from internal HDD to external HDD). I then reformatted the internal hard disk and proceeded to restore my backup (external HDD to internal HDD). I soon received an error message stating "Restore Failure - not enough space". I guess that means Disk Utility backups are a one-way operation, since you can't restore from a larger drive to a smaller one? Is there something I am overlooking? I ended up using Carbon Copy Cloner to do the job, but I'm wondering how (if?) restoring from a larger backup drive is possible using Disk Utility?
View 1 Replies
View Related
Feb 27, 2009
My primary MacBook is suddenly now powering up - Tried the power management reset....removing battery/power and attempting restart after 12 hours and so forth. Does this sound like Logic board? Is there a chance the HD data can be retrieved if it would be installed in another MacBook or...if Logic board is repaired?
View 2 Replies
View Related
Jul 6, 2009
when power pressed to boot, it will go into boot, but then the screen starts flickering from dim to bright a clicking sound is heard, the power cord on the side changes from dark to light amber. the screen then goes to black. some times am able to get to log in then it just goes black.- More information- my harddrive had been making erratic noises for about... 3-4 months. some loud clicking... in thinking that the hd failed i bought a 160gb WD Scoirpio blue IDE drive... These problems still persist. even when i option to start up with my external drive, which i have mirrored my hard drive. it will boot up for the external then this clicking noise as noted above.
View 3 Replies
View Related
Sep 6, 2009
My IMac crashes sometimes very suddenly, like in a power failure. It doesn't force quit or shut down, it just goes like somebody pulled the plug. It's usually possible to start it up again after 30minutes or an hour. The plug and lead seem to be fine. I tested it on another mac. The obvious suspicion would be overheating, but how can that be caused so suddenly (and how can I fix it)? It's an IMac Intel core duo, 20", 2 ghz, 2gb ram from 2006. I'm running Mac OS X (10.4.11) 2006.
View 7 Replies
View Related
May 10, 2010
I'm running OSX 10.4.11 on a 12" PowerBook 1.5 GHz with 1.25 GB of RAM and an 80 GB HD. When I run the disk Utility to Verify Disk, it ends with the message, "Error: The underlying task reported failure on exit." This happens if I run the Disk Utility from the hard drive, from the OSX installation disk or from an external hard drive. The Repair Drive button is always grayed out no matter where I am running the disk Utility from, too. I have cloned the entire hard drive onto an external drive with Carbon Copy Cloner. I know PPC systems won't boot from a USB drive, but I was considering booting from the install disk, re-formatting the drive from there and then re-installing from the external by running CCC from there.
View 3 Replies
View Related
Nov 15, 2009
It looks like the hard disk in my 1.5 year old iMac (24" 3.06 C2D, running 10.6) suddenly failed today. I woke the mac up from sleep and pretty much immediately I got a spinning beach ball. The system was totally unresponsive so I did a hard reset. Unfortunately the blinking "?" folder came up on the gray screen, instead of the familiar Apple logo. Booted off the OS X disk and ran Disk Utility. The hard disk comes up as "media" and unrecognized by the system. So no First aid or formatting possible. I'm guessing the hard disk has given up but before purchasing a new one I want to rule out anything more serious like motherboard issues.
View 7 Replies
View Related
Feb 19, 2010
I have an original MacBook Pro 15" (A1150) that randomly shuts down. Seems to be running very hot. I've already had to replace a bulging battery, and TechTool Pro has indicated a temperature-related S.M.A.R.T. failure with the HD.
If I downgrade the HD from 7200 RPM to 5400 RPM, will that help with the heat issues? Any other heat-related fixes? I know the 13" MacBook Pro suffered a random shutdown syndrome, but I didn't know if the 15" was affected too.
View 2 Replies
View Related
May 13, 2012
Macbook Pro won't boot. Symptoms preceding failure included failure to open Firefox. When trying to cold boot I can get as far as the start-up sound, the Apple logo, and the spinning whieel (spins for a bit but not for very long) and then major failure. Not running Liom.
Info:
imac 10.1, Mac OS X (10.6.2), also have macbook pro running os 10.5
View 2 Replies
View Related
Jun 4, 2014
I have an old Macbook via 2007 and I'm trying to update my operating system (currently OS 10.5.8) to Snow Leopard, but the disk is not reading in the disk drive. And unfortunately, Snow Leopard is only on a DVD, it can't be downloaded.I figure I have 2 choices:
1) take it in and spend $49 to have them do diagnostics and then tell me they probably need to replace the superdriveÂ
2) I could buy an external optical drive. But I would need to know which one would be compatable with my old *** Macbook.
Info:
Macbook
View 5 Replies
View Related
Sep 27, 2009
my Mac Pro 2008 runs Snow Leopard 10.6.1 on a striped software RAID and Windows XP using Bootcamp on a separate hard drive.
Initially that separate hard drive had been split into two partitions, one for Time Machine and one for Windows. But eventually I decided to get rid of the Time Machine partition and dedicate the entire hard drive to Windows.
I've done that but there appeared a strange problem. In System Preferences my startup disk was set to Windows and now I'm unable to change it to Mac OS X anymore. (Please see the screenshot below).
Of course I can select Mac OS X while holding "Alt" on boot, but having Windows a default OS on Mac Pro is very disturbing
I have no idea what is "boot helper partition" and what's wrong with it. I'm afraid that Windows installer (I had to use it while transforming the partition) messed something up.
View 2 Replies
View Related
