Mac Pro :: Disk Scratched - System Taking Longer To Rip CDs
Jun 1, 2010
I have a brand new 15 inch i5 mbp. I put a cd in to rip it onto itunes. It was really scratched. Now the computer ate my disc (I know I can restart and it will be ok, that's not my question). Shouldn't my brand new mbp be able to cope with a scratched disc? It seems a bit bizarre that the entire computer would freeze just because a disc is scratched. Also, it seems like it takes much longer to rip cds than it does on my pc. It doesn't just seem like it. It takes almost twice as long.
View 2 Replies
ADVERTISEMENT
Jul 21, 2010
I scratched my 10.5 disk and it wont read in the macbook pro I need it for but it reads in my mac pro fine. Is there a way I can make a duplicate of it to have as a backup and to use to install on the macbook pro? Also it would make sense to backup my 10.6 disk too.
View 6 Replies
View Related
Jan 24, 2010
Just recently my MacBook (10.6.2) has started to take around a minute to shut down instead of about 2 seconds like it always has done. It displays a lightish blue screen with the loading symbol as seen below the apple logo when starting up any machine. The only thing I have done differently recently is started using an external monitor and kb/mouse. Although I have disconnected all of these and it still does it.
View 2 Replies
View Related
Apr 22, 2009
I used CCC to clone my Hitachi 250gb 5400 rpm macbook pro drive to a Hitachi 320gb 7200 rpm drive.
I installed it myself (it's not hard to do at all took 20 minutes) and everything went fine but it seems as though before I see the Apple logo appear, my MacBook Pro now sits at a blank gray screen right when I turn it on for 10-15 seconds longer than it ever did prior to this upgrade.
Another interesting tidbit is that even though I made an exact clone of the drive with CCC, it seems that ALL of my LittleSnitch rules were dumped as LS asked me to verify everything all over again for MobileMe, Safari, FireFox, SimplifyMedia, Time.Apple.com, etc... Not sure why that happened.
I also noticed that on my original HDD it says "Apple Firmware Version" on the HDD label, is this why the new drive takes longer to boot? Does apple have a special firmware for it's drives that it's sourcing from Hitachi?
View 7 Replies
View Related
Jul 21, 2010
My late 2008 15" MacBook Pro has been taking a lot longer than usual to start up and shut down (lengthy spin wheel cycles).
It is completely up to date with Snow Leopard and I almost never download 3rd party software. I pretty much only use the included iLife apps and a bit of iWork, so I'm not sure what could be slowing the process down. I was thinking I could reinstall Snow Leopard.
View 14 Replies
View Related
Mar 12, 2012
Since the recent update to the time machine software it has been taking about twice as long to complete each hourly backup.
Info:
iMac, Mac OS X (10.7), WD backup disk
View 1 Replies
View Related
Aug 24, 2014
I have a mid 2011 27" iMac that is taking longer than 3 minutes to boot. I've tried turning off everything in the start up menu, but that hasn't worked. In one of the other questions like this, Linc, I believe said to go to terminal and post to questions the output showed up in Text edit, and I have posted them below:
Step 1:
Loaded kernel extensions:
com.logmein.driver.LogMeInSoundDriver (1.0.3)Â Â
Loaded user agents:
net.culater.SIMBL.Agent
com.seagate.SeagateStorageGauge.plist
[Code] ....
Info:
iMac (27-inch Mid 2011), OS X Mavericks (10.9.1)
View 1 Replies
View Related
Jul 31, 2009
I tryed to install windows xp on my mac and my disk was too scratched so the install failed. So i held down the power button on my mac until it turned off. Big mistake. Now whenever it boot up, it says press any button to boot from cd. I tryed installing rEFit, it installs but doesn'ty boot into the boot loader.
View 3 Replies
View Related
Jan 18, 2010
I'm not sure if it's ok to do this but is it possible to have the system stop writing in the the system.log? It's taking up a lot of space because and I want to stop it temporarily because for some reason it keeps rewriting lines every couple seconds.
View 1 Replies
View Related
Apr 29, 2012
I understand Time Machine taking a longer time initially when first installed, however my Time Machine seems to always be running, backing up ALL my files each time not just the newer ones. i.e. "it" (Time Machine) is always running.
View 1 Replies
View Related
Feb 19, 2010
My 13'' MBP is starting to act up and it's time to take it in for service. The display is not living up to expectation, but worse are issues waking up from sleep and unexplainable pinwheeling (during low cpu/memory/disk usage periods, etc)Anyway, based on previous experience with apple, i suspect they'll resort to the catchall new logic board solution they usually go to. My concern is that I've upgraded my HDD to a 500GB WD. Usually I would drop the stock 250 in there for the purpose of having it serviced and just put my 500 back when I got the machine back. The issue now is that the 250 is being used in another machine, and this would be a giant headache.
View 3 Replies
View Related
Sep 4, 2014
My wife's 128GB MBA is running out of space so we are trying to identify the culprits by using the marvelous Daisy Disk.Â
Her user account is taking up 43 GB (mainly music and photos) but the total for the HD is 103 GB. Does that sound right - that the system and other stuff (although not sure what that would be) takes up 60GB?Â
View 3 Replies
View Related
May 21, 2012
I continue to get this message, what is taking up so much room?
Info:
MacBook Air, Mac OS X (10.7.4)
View 2 Replies
View Related
Apr 23, 2009
I am trying to copy a DVDR recorded on a friend's DVD recorder. The disc is a single layer 4.7Gb TDK DVD+R and I'm using Toast Titanium. The problem is that my computer thinks the DVD+R is a dual layer disc. I say the computer rather than Toast because if I open the disc and copy the VIDEO_TS folder to the hard drive it takes up more than 10Gb, which is impressive since the disc it is copied from only has a 4Gb capacity! I have googled this but failed to find a solution.
View 3 Replies
View Related
May 11, 2012
I have about a dozen users on my Apple server. What's the best way to see how much disk space on the several disks are being used by each username?
View 8 Replies
View Related
Mar 28, 2010
My Macbook has been running pretty slowly recently but only at log in. Its been taking ages to load my name at the top of if you try anything before is loaded my user profile I guess it just crashed. Also every now and again the wallpaper doesnt load up. Anyway to fix this is booted into safe-mode, verified the disk and repaired the permission. My work insists I use McAfee enterprise edition for Mac if connecting their servers so I am also protected from viruses and mal-ware. Its just got worse. And stranger still Safari still loads but thats all. Any other program will bounce a few times and then do nothing. Even mail, pages, dreamweaver, terminal, settings - everything. Safari is the only working program I have found that actually still loads. The internet connection works find and everything else. McAfee is sitting in my status bar so I am guessing that has also loaded properly.
View 8 Replies
View Related
May 7, 2012
Printtool is taking up large amounts of CPU and System Memory resources.
Info:
iMac (27-inch Late 2009), Mac OS X (10.7.3)
View 1 Replies
View Related
Jun 4, 2014
I have an old Macbook via 2007 and I'm trying to update my operating system (currently OS 10.5.8) to Snow Leopard, but the disk is not reading in the disk drive. And unfortunately, Snow Leopard is only on a DVD, it can't be downloaded.I figure I have 2 choices:
1) take it in and spend $49 to have them do diagnostics and then tell me they probably need to replace the superdriveÂ
2) I could buy an external optical drive. But I would need to know which one would be compatable with my old *** Macbook.
Info:
Macbook
View 5 Replies
View Related
Apr 23, 2009
Youtube was working just fine on my 09 whitebook the other night. The last thing I did before powering it off was updating Firefox. For whatever reason, it will no longer load Youtube.com. All I see is a blank page while Firefox attempts to bring it up. The same thing happens when I attempt to visit the page via Safari. What's strange is that my Windows machine can access the site with no problem. According to OSX, all my software is current and up-to-date. I tried clearing all private data and restarting the machine but it still does not load.
View 3 Replies
View Related
May 30, 2012
Songs can no longer be burned on back up disk so if one changes comp.
View 1 Replies
View Related
Apr 21, 2010
I just opened my MBP and I found this black gunk on parts of it... it wiped off pretty easily but on the top of it there's one small scratch that isn't going away. Should I worry about this? I didn't even touch it and it had a scratch on it. It's very small but it still really bugs me. It just bugs me that I just turned it on and there's already a scratch.
View 18 Replies
View Related
Jul 17, 2009
I have a JVC Everio HD camcorder and am having some trouble importing the video. This morning, the camcorder was recognized by Finder and I could enter and view the files. However, the files are in .MOD/MP4 format so they would not import directly into iMovie.
This afternoon, I found a tutorial on how to convert the files so plugged my camcorder in again, only to find that Finder is no longer acknowledging it. It is recognized in iPhoto and Disk Utility.
View 1 Replies
View Related
Jun 17, 2009
I'm using a new i-mac and one of my external drives no longer is readable on the Mac. I can't do a disk repair or verify. I just get this message.
Verify and Repair volume �Monki 1�
Checking Journaled HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Invalid record count
Invalid record count
Volume check failed.
Error: Filesystem verify or repair failed.
I'm running OS 10.5.7
View 3 Replies
View Related
May 6, 2012
I have an external Lacie 1 TB hard disk which used to operate at USB2 speeds, but ever since I upgraded to my my Intel Mac Pro (from a G5) it only operates at USB1 speeds regardless of which USB port I plug it into. When I open up System Profiler, it reports "speed up to 12 Mb/sec" which of course is only USB1.1. It used to show "speed up to 480 Mb/sec". Do I need to reformat it something? Can I force it to connect at USB2 speeds?Â
Info:
Mac Pro, Mac OS X (10.6.8), 2 x 2.66 Dual Core
View 3 Replies
View Related
Aug 12, 2010
I've got a screen scratch that is driving me nuts. I've tried some of the buff compounds, etc. to no avail. applied a screen protector to mask the scratch? Right now it shows up because it distorts the light.
View 7 Replies
View Related
May 29, 2012
I backed up some movies for the kids onto an external drive (USB without power cord). Now when I plug it in, it does not even show up. If I try to look at it with the disk utility it sayd the file system is not recognised. Last time I accesed the disk was under leopard. Could it be that the change to lion has cut off access now?I do hear the disk start up when it plugs in and I have not seen any strange history with this disk before switching to Lion. (A drive of the same make but bigger and with power cord plus USB still works from before and after Lion). Small disk is Freecom 1TB (pocet size), Large disk is 2TB also Freecom but with powerfeed seperately.
Info:
iMac, Mac OS X (10.7.3)
View 4 Replies
View Related
Sep 17, 2008
I have looked through previous posts about something called firmware causing problems with a (I am assuming) later version of the DVD writer but can't find anything specific to my one.
Basically my DVD will no longer burn phots or music to disk. I have tried different disks but with no luck , all I get is a message along the lines of the burner is not calibrated.
The computer is a iMac PowerPC G5 running OS X 10.4.11 and the firmware listed for the burner is FA0G.
View 8 Replies
View Related
Jul 20, 2009
I am selling my MacBook as I upgraded to a MBP. I was cleaning the screen to pretty it up and realized that the screen was chipped or scratched. I am not sure what to do. It is going to be anywhere from $99-$200 to fix it. Do you think it is worth it? Below are the general specs of the MB:
CPU: Intel Core 2 Duo
Model or Type: MacBook w/ APPLECARE!!
Hardware Overview:
Model Name: MacBook
Model Identifier: MacBook4,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 800 MHz
Boot ROM Version: MB41.00C1.B00
SMC Version: 1.31f0
Serial Number: W88114Y20P1
Sudden Motion Sensor:
State: Enabled
Now, I am seeing similar MBs go for $800-$850
I have attached two pictures. Please let me know if you feel it is worth the extra time and investment to get the screen fixed.
full screen
super close up
So, I ask, is it worth the extra money to get it fixed?
Thanks in advance!
View 1 Replies
View Related
Sep 3, 2009
I obviously didn't choose my words correctly because everyone would rather pick apart what I said and did rather than acknowledging that...Apple sent me a scratched Snow Leopard disc.These things do happen so make sure you always backup your data and always check the disc before you put it in your computer. Even if its from a company you love and trust.
View 24 Replies
View Related
Jan 9, 2010
I searched for at least 20 minutes on this subject and can't find anything relating.
A friend of mine will sell me an aluminum 23" that works absolutely perfectly. The issue is a 3-4 inch scratch on the screen.
View 2 Replies
View Related
