OS X V10.4 :: Beep Tone On Startup; Main Disc Not Showing In Utilities?
Apr 14, 2012
After having repairing my hard disc with Utilities (having started up from my Install Disc holding C key) and being okay for a day, the thing seemed to crash again. Came home and the machine was off, not just asleep. Tried to start up, heard a single long beep tone, then the regular start-up chord, but it just hung. Then started up off the Install Disc holding D key, did the Appple Hardware Test, Extended, and that just stalled after a while - as it did each time before - and also the Mac was making a not-good-sounding whirring, hum noise. Started again off the Install Disc, this time holding C key, went to Utilities to try a Repair again, but this time the hard disk was not even showing in the Disk Utility!
My Macbook is awesome, absolutely no complaints except for this loud "Ding-dong" noise that comes at really random times. It's sort of fuzzy, like a recording on a cell phone (which I'm sure it's not), and it's just a higher pitched beep then a slightly lower pitched beep.
I've searched everywhere and I haven't found any posts or anything at all like this. I can have no applications open, other than background processes (I'll list those below) and it'll make the noise. So I sort of assume it's either some ridiculous Leopard malfunction or that it's one of the Preference Panes I have installed. If anyone has this same problem let me know, I'm going to start recording exactly what's open whenever it makes the noise and try to find something in common between them.
Whenever I try to start up my iMac all I et is a series of 3-tone beeps repeated endlessly and I can't get it to start up. Also now the apple repair disc is stuck in the drive and I can,t eject it.
My MacBook Pro: Model Name:MacBook Pro Model Identifier:MacBookPro8,2 Processor Name:Intel Core i7 Processor Speed:2.4 GHz Number of Processors:1 Total Number of Cores:4 L2 Cache (per Core):256 KB L3 Cache:6 MB Memory:4 GB
For the last couple of days, every minute, my Mac has been making a two-tone beep. I have absolutely no idea why. There are no jumping icons to tell me that a program wants my attention and I have tried closing all my applications, the problem does not go away.
Info: MacBook Pro (15-inch Late 2011), Mac OS X (10.7.3)
I have recently tried to run Onyx which has identified a problem which requires me to run disc utilities from the start up disc. The Snow leopard disc I have only appears to offer Install option.
Q1 Have I missed something? Q2 Otherwise should I try to run Disc Utilities from an earlier version of OSX
Ever since i did the Macbook EFI Firmware Update 2.0 and Xcode Update 3.2.5 i get a tone at startup. Also, everytime i run software update it tells me that i havent installed the firmware update yet,. I have already tried to update it but it always fails during installation.
I feel a bit silly, but I've not been able to turn off the tone that happens after I turn on my iMac. I've got the volume turned all the way down at the speaker icon, top right of screen
I lost the startup tone a couple days ago. I repaired permissions, did an SMC and PRAM reset and it makes the tone while doing the PRAM reset but the next time you turn it on it doesn't make a sound.
I started up my MacBook Pro this morning and heard a quick "beep" noise come right before the Apple Tone startup noise. Is this just a small glitch or is it a code for something more serious?
When I turn on my macbook pro I'm getting a single beep followed by nothing. It started happening all of a sudden a few days ago. Following the beep, I hold down the power button to turn it off again and start it up and then usually get nothing a couple of times - eventually after 2/3 goes at turning it on and off, it'll eventually start up as usual. I've read that 1 beep signals a problem with RAM? Is that right? The RAM I have in there what it came with so I can't imagine it's that.
I have just installed an ARECA 1210ML external RAID controller in an early 2008 octocore Mac Pro. Everything seems to be working fine.However, when I press the power button to switch on the Mac, there is a immediate loud single beep. I am using refit & the beep happens before the list of OS's appears.There is a system setting in the ARECA config web interface that allows me to disable the system beeper but it doesn't seem to stop the beep.
Am hearing a beep tone every 5 seconds when I startup my iMac computer. It is on macosx.
The last time I used it was when I was playing starcraftII and I shut down without removing the CD like I usually do. But this time when I startup the iMac does not boot up. I have tried resetting the SMC and it didn't work. I pressed down the mouse while startup and the CD didn't come out but I started to hear these beep tones, when I startup now. Thought it might be the memory card so removed them and tried starting up without them and then tried one by one and I still getting the beep tones, will I lose my hardisk as well if I keep rebooting too many times like this? How to get the CD out and startup the iMac properly?
I have a 4 month old iBook 12" 1.33/512/40/combo with the following problem. It went into sleep mode and never woke up. after complete reboot 1 long beep and silence. after taking the battery out and disconnect for about 4 hours I get the beep, but inbetween absolute nothing. Anyone has tips or a solution. there is no additional memory installed.
I recently purchased a 500gb LaCie hard drive to use as as extra storage for media, not necessarily for back up purposes. I cannot seem to find it either under disc utilities or in the finder window. Has anyone had this issue with a hard drive and if so any suggestions?
I've been having problems with iCal and would like to reinstall it using Utilities Disc 1 with the Superdrive. However, there only appears to be an option to reinstall ALL the bundled software, at which point I've aborted the reinstallation process. Sledgehammer to crack a nut! It's only iCal I'm having trouble with (e.g searches not clearing down, "today" button greys out.) If it's not possible to reinstall just iCal from disc, does anyone know a way to "repair or mend" a malfunctioning iCal?
I've run into a nasty problem in that my main user account is no longer visible at the login screen, only the guest user account. Basically there is no way I can figure out to get back into my Air other than the safe Safari guest account.
I'm in desperate need for a solution as I need to access files for a conference call in 3 hours.
Info: MacPro, MacBook Pro, MacBook Air, Power Mac Dual 2GHz G5, Mac OS X (10.5.5)
Currently creating a disc image to upgrade hard drives however I've left my SL disc in a different part of the country.. When I put in my new hard drive is there a way to access my disc image from my back up source without using the SL OS disc?
I installed Windows 7 Beta on my MBP yesterday and for a while it showed up in my Startup Disk options in System Preferences, but now it doesn't show up. The partition is still there in Finder and I can boot to it each time by holding down the option key, but if I restart more than once in Windows 7, it defaults back to OS X. Is there a way to put the disk back into the Startup Disk options?
Updated my late 2007 iMac to 10.6.2 and after that every time I pop in a DVD or CD into the optical drive it spins up and then I get a dialog box that tells me that I have put in an empty disc and the question what I want to do. Can't read them in itunes or DVD player (or any other program). Is it just coincidence that this happened just when I updated. The drive is an OPTIARC DVD RW AD-5630A
I made a backup image file of D2 LOD and im trying to install it again but the installer keeps telling me that i need to insert disc. So my question is, how do i mount this image so that the installer can use it.
Clarification: I lost the original cd so i just have this backed up image, so the image is legit.I just wanted to play this game and i dont wanna have to go buy the disk again.
I've finally installed win7 on a secondary internal hd in my mac pro. When starting up and holding down ALT i can indeed select between the two os's. However in mac the "Startup Disks" system pref's doesn't show win7. I would like to be able to restart from the system pref's instead of holding down alt but i can't if it's not viewable in the Startup Disks Pref Pane...
The restartup using bootcamp procedure takes longer then it should on my machine, a mac pro with two ssd's. Sometimes it gets hung up on the grey screen for thirty seconds or so. How can I get Startup Disks to see my Win7 hd? How can I get the grey screen part of the bootcamp startup process not take so long?
I ran omnidisk sweeper and it shows I only have 39GB of used space. However, when I check the info on the startup disk it shows that I only have 300mb-5GB left depending on the day. I have deleted all unnecessary files that I can. I can't really find anything else to delete. I only have a couple programs installed that are pretty basic like word and excel.
Info: iMac (21.5-inch Mid 2011), Mac OS X (10.7.3)
I had a dvd in the drive of my imac and it had no idea it was there. it wasn't on my desktop and it wasn't listed under devices. I tried to open the dvd player, and it told me that there was no supported disc. After I ejected and reinserted it, it worked. Was this just a mac brain fart?
While working at a new projekt iMovie stopped working and shows the colored disc for processing. When I try to restart the Mac I get the information that a program named backup-helper prevents the restart. I can't find a program with this name.
