MacBook Pro :: Stuck In Disc Utilities Will Not Start Up
Jun 25, 2014Macbookpro stuck in disc utilities will not start up! It has an unmounted disk that won't erase!
View 5 RepliesMacbookpro stuck in disc utilities will not start up! It has an unmounted disk that won't erase!
View 5 RepliesI have recently tried to run Onyx which has identified a problem which requires me to run disc utilities from the start up disc. The Snow leopard disc I have only appears to offer Install option.
Q1 Have I missed something?
Q2 Otherwise should I try to run Disc Utilities from an earlier version of OSX
I've been having problems with iCal and would like to reinstall it using Utilities Disc 1 with the Superdrive. However, there only appears to be an option to reinstall ALL the bundled software, at which point I've aborted the reinstallation process. Sledgehammer to crack a nut! It's only iCal I'm having trouble with (e.g searches not clearing down, "today" button greys out.) If it's not possible to reinstall just iCal from disc, does anyone know a way to "repair or mend" a malfunctioning iCal?
View 2 Replies View RelatedMy late 2008 macbook pro 2.4 ghz 4gb Ram 250 gb HD has mavericks on it im not sure exactly which version but I know its mavericks. When I boot it sticks on the apple logo with spinning wheel. When I boot into OSX utilities I get stuck. I can move the mouse but cant click on anything. Hitting the up and down keys lets me highlight the 4 available options which are "restore from time machine backup" + " reinstall osx" + "get support online" + "disk utility"  I cannot choose any of these options no matter what buttons I press or how many times I try to click on it. Press up or down and I can change what is highlighted between the 4 choices immediately.Â
Info:
MBP 15" unibody 2.4 ghz 4gb Ram, Mac OS X (10.6.3)
reinstall from a back up. After clicking, I decided I wanted to copy some information back so I cancelled it and now I am stuck in the OS X Utilities window. I want to go back to accessing the HD to copy some files and make sure I have all backed up. how to just restart and skip the Utilities window?
Info:
iMac, OS X Mavericks (10.9.4)
I recently purchased a 500gb LaCie hard drive to use as as extra storage for media, not necessarily for back up purposes. I cannot seem to find it either under disc utilities or in the finder window. Has anyone had this issue with a hard drive and if so any suggestions?
View 12 Replies View RelatedAfter having repairing my hard disc with Utilities (having started up from my Install Disc holding C key) and being okay for a day, the thing seemed to crash again. Came home and the machine was off, not just asleep. Tried to start up, heard a single long beep tone, then the regular start-up chord, but it just hung. Then started up off the Install Disc holding D key, did the Appple Hardware Test, Extended, and that just stalled after a while - as it did each time before - and also the Mac was making a not-good-sounding whirring, hum noise. Started again off the Install Disc, this time holding C key, went to Utilities to try a Repair again, but this time the hard disk was not even showing in the Disk Utility!
View 1 Replies View RelatedI have a disc full of photo's stuck in the disc drive on my imac. When I try to eject it, I get a spinning rainbow circle and have to do a hard shut down. It sounds like it is trying to eject it, but then gets hung up.
Info:
iMac, iOS 5.1
So, earlier, I went to eject a DVD from my Macbook. It ejected fine, and then I inserted a CD. Now the Macbook won't recognize the disc. It sounds like it keeps on trying to read the disc. When I press eject, the Macbook makes the sound like it is ejecting it, but it never comes out, and after a moment, it makes the sound like it trying to read the disc again. What should I do, and how can I get the disc out?
View 8 Replies View RelatedMy G-4 startup disc is full and now the computer won't start up. I am told to put a startup disc in the drive and restart from it, but I cannot get the disc drive to open. I have tried everything, including copying over to external hard drive. I read that if you hold the mouse button down, the disc drive will open, but this hasn't worked.
View 6 Replies View RelatedSo I wanted to watch a DVD on my Macbook. I inserted the dvd and nothing happens, I then realized for some reason I no longer have a dvd drive (I just played a dvd on my macbook a couple of months ago) Now I can't eject the dvd. I've tried pretty much everything (holding the mouse pad, using terminal). It's as if I don't even have a eject button. I also don't have apple care and had to bring my computer in about 3 months ago to get fixed and that was a nice enough bill that I have to pay off.
Info:MacBook, Mac OS X (10.6.8)
How to take out the stuck disc in macbook pro. I already try to eject by clicking into the terminal on ejecting the disc. But it seems failed and the it keep comes out the sound from the disc. How to take it out?
Info:
MacBook Pro (13-inch Mid 2012), OS X Mavericks (10.9.4)
i have a macbook late 2008 aluminium, just tried to burn something to a dual layer dvd with roxio toast 10, it failed and now the disc is stuck in the drive.
View 5 Replies View RelatedOkay so I have a white MacBook that I'm trying to upgrade from Leopard to Snow Leopard. It's on the latest version of Leopard, 10.5.8. So I have a family pack DVD for Snow Leopard that's got 2 installs left on it. So I decided to go ahead and use one on my MacBook. I put the disc in the drive and I could hear it spinning around in there. But then nothing. My computer won't even read it. It doesn't show up on the desktop, it doesn't show up in disk utility, and pressing the eject button on my keyboard does nothing, like it doesn't even TRY to eject it. I've tried the reboot + holding down the trackpad, it did nothing. I tried typing drutil tray eject in terminal to force it to eject, it also did nothing. It's not like theres anything thats really stopping it from coming out, it literally just won't even attempt to eject the disc.
It seems like my computer isn't even recognizing theres anything in the drive, the fact that it doesn't even show up in disk utility is worrying me. I've used this drive with other discs before, but never had this problem.
My Superdrive was making a funny noise, so I quickly ejected my game disc so It wouldn't ruin it. A few minutes later, I had to burn a DVD, so I put in a blank DVD, and tried to burn my iDVD project to it. iDVD kept telling me to put a disc in. I hit eject, and nothing happened. I went to my desktop, and noticed that "Blank DVD" was not present. So, I have a disc stuck in my MBP, and my Mac doesn't think there is a disc in there, so eject doesn't work. What do I do? Should I just bring it in the Apple Store?
View 2 Replies View RelatedJust completed a divx upgrade, restarted and the MacBook will not go past the white screen with the apple and the little wheel going around.
Info:
MacBook Pro
'Ive had a MacBookPro for about a year and a half - with zero problems to report. But, yesterday, I decided to do a software update for OSX. While waiting on it, I relaized I was running late for an appointment, got impatient and did a forced shutdown (stupid move, I now know). Anyway, upon restarting it, I get the usual start-up chime, then the grey screen with the apple logo and the spinning wheel - and then it stays there. I tried putting the operating syten disc in and did a start-up - same results. Ditto for safe start. I also tried to reset the NVRAM, got the second chime, then back to the same. Is there anything you folks can suggest? Is there a way to override this and get back to normal? I hope I'm merely having hiccups related to the operating system. Or could this be a sign of the dreaded logic board failure that I fear?
Info:
MacBook Pro
I have checked Software Update, and there was two updates. First one was Java and the other one was EFI Update 2.7. I don't remember the Java update version. After I applied the update, the MBP rebooted itself as it should do; but the problem occurred at that reboot. OSX tried to start up three times, like as it was failing to install the updates after reboot. And at the fourth time, after a few minutes the Apple logo turned into a "No Entry Sign".
And it stuck like that. Now, the MBP cannot boot normally, I can only run it on safe mode. I have reset PRAM. As far as I read about the issue over the boards, the problem occurs to be an HDD problem. Yet I can run the OSX in safe mode, which bugs me. So I downloaded SMART Utility to check the HDD. It says there is 1 Pending Bad Sector, and 1 Removed Bad Sector.
Info:
MacBook Pro, Mac OS X (10.7.3)
my macbook pro just gets stuck at grey startup screen
Info:
MacBook Pro (15-inch Mid 2010)
I keep getting a message to say my start disc is full and I cant understand why. I dont have a lot of things saved on it and it affecting the operating of my laptop ie, freezing/wont download new mail.
Info:
MacBook Air, iOS 5.1
I've dumped all unneccesary applications, all documents, all movies and music, no documents and I keep getting a message that my start up disc is full. I also minused my self off and deleted my account creating a new one and that sitll did not help.Â
View 3 Replies View RelatedHow do I reinstall my HD start up disc?
View 1 Replies View RelatedThis is my first time having some serious problems with my first MacBook, and I was hoping someone out there could help me out. This macbook was bought on June 2006 (a white MB) with I believe the 10.4.6 OSX on. I gave it to my dad which is across the world and he called desperate a few days ago saying that the system won't boot up. When the power button is pushed on and the system starts, rings the Apple bell and soon after colorful vertical lines show up across the screen and the system freezes. Here's what I found out from my research on the topic, for some macs of that generation, when the system updates from 10.4.6 to 10.4.7 some video card issue causes this glitch to happen. The solution: zap the PRAM (by holding control + command + p + r when booting the computer.) My dad has tried this approach many times and it doesn't solve it. We also tried booting it with the installation disc and that didn't work. We also tried the safe mode boot and that also didnt work.
View 2 Replies View RelatedOver heated my battery and it popped out of its casing. Restarted it with no battery and worked fine. Never used the battery because charge rail is no good. Used it this morning to file tax returns. After I finished their was a system update that required a restart and now the computer is stuck on the start up screen with spinning wheel of death.
Info:
MacBook Pro, Mac OS X (10.6.8)
I ignored the startup disc is full message now it; has me log on then goes to the milky way screen and basically stops
Info:MacBookPro
My start up disc is too full. How can I make more room?
Info:
MacBook (13-inch Late 2009)
MacBook pro(2010) running Lion would not start. Tried restore twice with no luck! Trying to reinstall Mac OS X but I get the message that the disc is locked! Using Disk Utility it shows my hard disc has no problem!
Info:
MacBook Pro, Mac OS X (10.6.7)
recently attached an external hard drive with data from an early 2008 Macbook to my early 2009 Macbook running Maverick 10.9.Now my computer will only boot up once in every 10 tries and I can't access any files or my finder.I do get a message saying my start up disc is full and I must delete some files. How can I do this if I mostly just get a grey screen and when it does boot up I can't get my finder to come up
View 2 Replies View Relatedmy mom's Macbook Pro can't start up. it gets stuck at the grey screen w/ the Apple logo and spinning pinwheel every time. nothing else is plugged into the laptop aside from the power cord. Â
here's what i tried already, but to no avail:
 - Reset SMC
 - Reset PRAM
 - Hold shift while starting up... nothing happens. So can't start in safe mode
 - Used install disk to run Disk Utility diagnostic: Ran into a bunch of Disk Permission errors and fixed those. Nothing wrong on the Disk itself.
 - Held Command-S while starting up and typed "fsck -fy". Got "File system was modified" at first. Ran it again and got clean bill of health there
 - Held "d" while booting, ran the hardware test and it checked out fine.Â
after all of the above, tried waiting for it to restart for 15 minutes and still same spinning wheel. Â
this all started when a Skype update couldn't install, so i got rid of the current Skype. then tried downloading the new Skype. after it supposedly downloaded fully and it was automatically processing in the download pop up window (e.g. something about "writing", "image", etc.), it got stuck and froze the computer for at least 5 minutes. at that point, i help the power button until it turned out. then this started..
PS: not sure if this has anything to do w/ the problem, but after this happened, i tried to use Disk Utilities to make an image onto an external hard drive and it gave me an "operation timed out" error.Â
PPS:Â she has the following specs -
Hitachi Hard drive; partition Map Scheme: GUID Partition Table
[Code]...
My MacBook Pro won't boot past the white startup screen with the Apple logo. After doing some trouble shooting my best guess is that the issue is either an issue with the logic board or the hard drive, but I am no expert so I may not be right. Here is what I have tried so far. I have done all these steps multiple times and the results have varied, but here are my most recent results:
1) First off, there are no peripherals connected so that is already ruled out as the cause.
2) When I try starting up in safe mode (holding shift while starting), the Apple logo, spinning wheel and progress bar appear. The progress bar fills about a third of the way then stops. I have left it for quite a long time and it still stays at a third of the way.
3) When running a safe boot (holding shift+command+v at startup) it gives me a " SATA WARNING: Enable auto-activate failed" message, and then eventually times out. Here is the full message:
4) Resetting the PRAM (holding option+command+p+r at startup) does the second chime but only results in the flashing folder icon with the question mark.
5) I tried booting up the computer in single user mode (holding command+s at startup) and running fsck -fy, it again gives me a "SATA WARNING: Enable auto-activate failed", then eventually times out. Here is the full message:
6) I tried booting in recovery mode (holding option while starting). When I do this I do not get the OSX utilities screen. Instead I get a white screen, sometimes my hard drive shows up on the screen, sometimes it does not.
If i boot in recovery mode with my osx install disc inserted the disc appears. If I select the hard drive we are just back to the apple logo and spinning wheel. If I select the install disc it goes to the apple logo/spinning wheel again, sometimes it allows me to start running the install, but then when it gets to the step where you select the hard drive to run the install on, no hard drives appear.
So that's where I'm at. I do not care about losing any data because luckily I backed up this machine right before this started happening.