OS X :: How Can I Run Specific Applications On 32 Bit Mode
Dec 22, 2009How can i run specific applications on 32 bit mode?
View 2 Replies
ADVERTISEMENT
Applications :: Routing Applications Through Specific Connections
Apr 8, 2010'lo i use a iMac mid '09 @ work we have access to multiple connections Ethernet and Airport. Sadly the Ethernet is fire-walled and doesn't allow specific connections through; lucky though the airport is not.
The thing that is most frustrating is our system critical app HAS to run through the Ethernet to function under the fire-walled connection; but being on mac it's a friggin task to switch between the two because you have to go into network and set the service order each time to flip between them. I really need away that i can assign a specific application to use a specific connection (airport) that is active and connected while keeping the service order the same as to not mess with the system critical App that has to run through the enet. Is there any process or outside app that i could use to force other apps to use the airport connection while still leaving the Crit app using the enet?
I've been able to set the service order over to airport launch the app i want to use it and then switch back over to enet for the crit app but it seemed to work fine but that's a lot of Jank to pull each time i want to use an outside app. also i didn't really do it for any length of time so i don't know if that process would even hold up over time or flip back over to the opposite connection when it needed a fresh link
OS X :: Internet Only Works In Specific Applications?
Jan 28, 2009i noticed that my internet, while working just fine in firefox, refuses to work in mail or ichat. Also, i have only found one page that refuses to load (the most important of course) which is [URL]. Has anyone had this problem before?
View 3 Replies View RelatedApplications :: DVD Ripping Specific To Time?
May 18, 2009I tried putting together an iMovie project last night, but the main VOB files that I got the movie clips from were huge. The DVD I'm working with has chapters that last five minutes. I have MacTheRipper and I've tried Handbrake, but from what I can see, I can only go as small as ripping chapters from the DVD. I don't want something that large piling up on my computer when I'm only using tiny clips. (Perhaps even I did my iMovie project wrong? I got a terrible surprise this morning when, after deleting the large movie files, my iMovie project no longer worked.) Is there a program that lets me rip from - say 7:13 to 8:05? Just that clip - not a chapter or the whole thing?
View 1 Replies View RelatedOS X :: Using Firewall / Allow Specific Services And Applications
Jul 28, 2009I have my firewall set to "allow specific services and applications."
I noticed today that DashboardClient, System Preferences, and a program called "ScreenSaverEngine." Are all set to allow..
Typically i'd just want itunes so I can use simplify media, and safari/firefox because i think it has to be enabled.
What are the parameters for allowing a program incoming access in general - i seem to get asked it now that I have this option checked and wanted to make sure? I find it odd that i have some system utilities on my list set to allow - is it just me?
OS X :: Use Migration Assistance On Specific Applications?
Dec 31, 2009I've used migration assistance before to transfer things in bulk, like everything from my old macbook to my new macbook... but I was wondering if I can transfer small, specific apps like my itunes library and my iphoto collection from my macbook to my new imac. does migration assistance give you an option like that when you use the ethernet chord?
View 5 Replies View RelatedApplications :: Printing Specific Pages Out Of Preview?
Jan 1, 2005When I'm in printing and want to print a specific page after viewing in Preview, is there a way to select from within Preview that certain page, or range of pages to print?
View 3 Replies View RelatedApplications :: Photoshop Elements - Specific Color?
Feb 2, 2009I need to find a way to get a specific color from a website to this app. There must be a way to accomplish this.
View 3 Replies View RelatedApplications :: Safari 4 Google Search - UK Specific?
Apr 3, 2009Anyone know how to get the Google search field at the top right of Safari to use [URL]?
View 2 Replies View RelatedApplications :: Converting Video To Specific Requirements?
May 28, 2009There are many video converters on mac but I 've not found something to suit my needs.
Videomonkey(buggy?), roadmovie, mpeg streamclip etc.
Sometimes we do not want just a beautiful interface but also get the job done the way we want it.
So this is what I want:
- specify the exact video format I want my video to be converted. Not just a selection 'for ipod, for apple tv' and so on. So what? Am I supposed to make several conversions in order to see what each so labeled options mean in reality? I try to export to .mp4 and this should be a straightforward process.
- most important: limit output filesize. Specify the desirable filesize and converter should output a file that has this filesize. If anyone has seen convertxtodvd in windows, he should understand what I mean.
OS X V10.7 Lion :: How To Assign Specific Applications To Spaces
Mar 24, 2012How do you assign specific applications to spaces in OS X Lion?
Info:
Mac OS X (10.7.3)
Applications :: How To Permanently Open Certain Video Files With A Specific App
May 19, 2009For some reason my mac always resets my 'open with' preferences if I restart my computer.
So for instance, even if I go through the usual route of selecting a program as the default player (select file/get info/open with/change all), as soon as I restart my mac it will always revert back to the default players and not the newly selected one.
Is there a work around? A setting in OSX which im missing? Or perhaps a third party app which can handle this?
Applications :: Block Outgoing Traffic On Specific Ports?
May 26, 2009I need to block outgoing traffic on specific ports. Is there anything default in OS X to do this? If not, what application could I use? I'd prefer to use the OS, if it has an ability to do this.
View 4 Replies View RelatedApplications :: Cannot Open Specific Webpage In Safari / Mozilla
Mar 19, 2010I am trying to access a website [URL] and in Safari I receive "Safari can't find the server" error message. In mozilla I am able to goto the home page but if I click on any of the links I receive "server not found" error message. I have not run into this problem with any other sites and was wondering why this is happening.
View 7 Replies View RelatedApplications :: ITunes 10 Not Playing Specific Album In Library Correctly
Sep 20, 2010When I select any song from this one, specific album in my library, iTunes will hesitate for a second, and the Quicktime-esque player window will automatically appear too. This happens only with this one album, and it's very frustrating. I will attach a screenshot of the problem. And also, if I go to close this player window, the song stops.
View 6 Replies View RelatedApplications :: Using Entourage - How To Copy Flagged Message To Specific Folder
Feb 9, 2009I'm trying to create a simple rule that will allow me to copy any messages I flag as a To Do Item to a folder called, "To Do."
So far I have this: If "Status is FLAGGED," then "Copy Message to TO DO." This doesn't seem to work though.
Applications :: Notify If Forget To Enter Date In Specific Cell
Apr 1, 2009I am trying to figure a way to notify me when I forget to enter data in specific cells, that need to be filled in. I included a screen shot. What I want it to show is basically fill in the whole row in red or another color. When I forgot to input data. Is there a formula?
View 2 Replies View RelatedApplications :: Disable Junk Filtering For Specific Accounts In Mail.app?
Jan 29, 2010Could you please tell me if it is possible to disable junk filtering for specific accounts in Mail.app? I have two Gmail accounts and several other email accounts and Google recommends disabling your client's spam filter when you use their service.
View 7 Replies View RelatedApplications :: How To Resize Photos To Specific Dimensions Without Losing Resolution
Mar 20, 2010I have a few pictures I took with my digital camera and I want to print them and put them in a frame that is 11.5cm * 7.7cm. So, I need to adjust their size to print them that size.
I don't have a colour printer, so I'm printing off a library computer in colour, so I can't print them directly off my mac. I'm going to need to transfer them on a usb and open them in windows on a library computer. The pictures are in .JPG format since I uploaded them.
-So I went to Preview (program) and Tools > Adjust size.
-I typed in 7.7cm for width and it gave me a locked length of 11.1cm as that would probably keep the pictures proportionate. I'm alright with that.
But then, when I look at my picture, it's much smaller that the actual dimensions of 7.7cm. Then when I zoom in, it is pixelated. That'd odd because I'm actually reducing the dimensions of my picture.
How do I adjust their size so they print to 11.1 cm 7.7 cm?
Applications :: IWeb Suddenly Quits When Select A Specific Page In My Website?
Nov 10, 2009I have a page "Welcome" next to other pages ("About Me"...).
Since yesterday when I open iWeb and click on the "Welcome" name to select the page (to modify or just look at it), iWeb immediatelly quits. The same happens when I follow a link to "Welcome" from another page.
I can access all other pages with no problems.
I tried deleting iWeb's preferences file, restoring an older copy of my domain.site2 file, overwriting iWeb with another copy of iWeb (same version), nothing changed.
This concerns iWeb 3.0 (build 301) on Mac OS X 10.6.2 (Darwin 10.2).
Applications :: Locate Specific Item To Remove The AppDelete Contextual Menu Item
Jun 23, 2010I've uninstalled appdelete as I now use cleanapp. Anyway, I have uninstalled it but the contextual menu is still present. I have tried looking at the services and libraries but cannot locate the specific item needed to be deleted to remove the appdelete contextual menu item.
View 1 Replies View RelatedApplications :: How Do I Get A Specific "blue Light" Open Application Dock Design?
May 30, 2010i saw on a video of some guys dock. and instead of the stock blue light under the applications that are open, he had an actual blue glowing circle under it....looked really cool. anyone know where or how i can customize this feature on the dock?
View 2 Replies View RelatedHardware :: Wacom Bamboo Pen/Mouse Mode Resets To Pen Mode After Restart?
Jan 11, 2010I have been using a Wacom Bamboo for a while now and always have it in Mouse mode.
Since I upgraded my iMac to SnowLeopard, the Bamboo Pen/Mouse mode always resets back to Pen Mode after I have booted my iMac which is verrrry annoying - especially since I have a dual-monitor setup!
I have already tried to install the latest drivers for the Bamboo but this has not resolved my problem.
Has anyone else seen this problem and possibly know how to solve it?
OS X :: Won't Work With Kernal Panic / No Safe Mode And Target Disk Mode
Jul 6, 2010I have a 15" mbp with 10.6 Intel core duo, 4gb ram with a boot camp and ubuntu partition through parallels. The other day I was installing xcode from apple's website, which failed 3 times after downloading saying the package couldn't be expanded. I left my computer for a while and came back where i then had to log in again. it rejected my password numerous time (i'm positive it was correct). when i restarted my computer i got a kernal panic screen when the apple logo came up. it told me to restart the computer which i did. didn't work. i restarted with the osx cd to use the disk utility. when it checked the drive it found a bunch of errors, which i then tried to correct. it went for a couple minutes then told me they couldn't be fixed and i should try to back up my data and reinstall osx. i don't know how to back up my hard drive when i can't log into my account. i've tried to boot in target disk mode and copy some files that way, but the only disk the other computer sees is my windows partition- no mac partition.
i've also tried these, none of these have worked: restarting in safe mode resetting the ram and pram booting with different sticks of ram all result in a kernal panic.
my windows partition still works fine though (as much as i hate to say it) the only things I really care about on my computer are my files from school and my itunes library. is there any way i can get these files off my computer?
IMac (Intel) :: Booting In Safe Mode Only - How To Boot Up In Normal Mode
Sep 3, 2014My iMac24" can't booting in normal mode, but booing in safe mode only.
how to boot up in normal mode. If I restart the system, it is showing the apple logo and not going to Finder.
Info:
iMac, maverics
OS X :: 64bit Mode Snow Leopard - Computer Always Boot Into 64-bit Mode If This Is Done Once?
Aug 28, 2009I did a bit of reading on the internet, and it looks like most computers will not boot into 32-bit mode by default with 10.6. It appears that if while booting the user holds the 6 and 4 keys, the computer will boot into 64-bit mode.
Does anyone know anything about this? Will the computer always boot into 64-bit mode if this is done once? Will it even make a difference? Will the average user want to do this?
MacBook Pro :: Can Use Target Display Mode After Booting In Restore Mode?
Jun 2, 2014Troubleshooting a broken display on a 13MBP with OSX Lion. Target is 2011 27' iMac running Mavericks.
Info:
iMac (27-inch Mid 2011), OS X Mavericks (10.9.3), Office for Mac
MacBook :: Display Works In Safe Mode But Not In Normal Mode?
Aug 21, 2014I'm not sure what to do. I haven't tried resetting NVRAM/PRAM or the PMU/SMC, but are there other options I can try besides those?
View 1 Replies View RelatedMacBook Pro :: Airport Only Works When In Clamshell Mode Mode
Aug 28, 2010One day I was using my MBP open and external monitor hooked up. Everything was fine until the internet went down suddenly while I was using iChat.
My airport wouldn't see a network and after a couple restarts and a few resets my airport finally connected to my network. Once connected it would only issue a self-assigned IP, which obviously wouldn't work.
I was able to get around this by manually entering in the correct info but the speeds were low at best, usually pausing and stalling every minute.
After frustratingly trying get it to work, I entered clamshell mode because there was no reason at the time to have dual monitors. Once I did, viola, the airport kicked in and started working full force. It's been this way for about a month now.
My laptop is a MacBookPro5,1 with a 2.8 GHz processor and 4 GBs of RAM.
I've read that airports will have serious degradation issues if overheated and while that may be the issue, it doesn't seem to be the case.
I have smcFanControl installed and the MBP seems to be relatively cool to the touch. The fans never seem to be loudly kicking in and I have it raised on a fan powered cooling pad.
I do, though, use pretty much every port on my MBP. External monitor, speakers, both USBs, and firewire 800 are all in use, so maybe this is a resource issue or a very area specific heat issue.
Software :: Enable Sync Mode Rather Than Backup Mode
Aug 15, 2008I'm currently using a 60gb MacBook 1.83 w/leopard. My Time Machine volume is a 250gb USB drive.
Over time I could see myself filling the drive because I listen to a lot of podcasts and since time machine is doing a backup rather than a sync, every podcast present on the system at the time of backup is retained.
So, is there a way to enable sync-mode rather than backup mode for certain directories, OR is there a way to go into the backup history and delete files and/or directories (this seems to be locked/protected, rightfully so)?
