I'm trying to get my macbook hooked up to two external displays.I remember seeing a post about it previously, with a solution, however, I stupidly did not bookmark it. Does anyone have a solution? As you know, the Macbook only has 1 mini-dvi port.
View 9 RepliesI have a new mbp and a WD 500gb external, the smaller size ones. When I hook it up directly to the usb port on my comp it mounts, but if I try to use the logitech 4 port usb hub the comp doesn't find the external.
View 3 Replies View RelatedWhich MacBook Pro screen size would you choose for the following?
- Viewing 6 or more hours daily, not hooked up to external display.
- Will be my main computer.
- Used for work and entertainment, heavy emailing, use of iWorks software, light photo and video editing, surfing, no gaming.
- Will go with me nearly everywhere, home, office, cottage, travel. Used on desk, heavily on couch, deck, kitchen, bed, cafe.
- Price not a factor.
13, 15, or 17" screen, please vote in the Poll.
That said my problem is the internet is really slow when I connect my macbook to a my samsung 24" monitor. Super slow and when I disconnect, the internet is perfectly fine. I use [URL] to measure the speed and with the monitor I get usually around .05 Mbps to 3Mbps, without 12-19Mbps.
View 3 Replies View RelatedI have a 2011 iMac which i've loved using. I bought a Seagate goflex external harddrive so I could start using time machine. I've noticed that whenver I power my iMac down it will sit on the grey screen just before shutting off for a long time. In fact, it will not actually shut down until i unplug my external hard drive. As soon as I unplug my harddrive the mac starts thinking again and shuts down within seconds. Why it would do this. I now hard plug my harddrive in because of this, which is kinda of dumb since I bought it to work as a time machine.
Info:
iMac (27-inch Mid 2011), Mac OS X (10.7.4)
I read the thread about how to pivot your screen over in another section but it didn't address what to do when it goes wrong. And it did...very wrong. I'm running a Powerbook G4 Titanium 15" laptop with Tiger OsX 10.4.11 and I hooked an external monitor to it. I was playing around with the settings and saw the rotation feature, which wasn't available until I attached the external monitor. As soon as I clicked on 90 degrees, both the main screen and the external fritzed out. I could vaguely see things through the haze on the main screen but the whole thing had stopped responding to all mouse and keypad commands. Eventually the only thing I could do to regain control was a hard shut off with the power button and unplug the external. After that the main screen booted up just fine but the moment I hook up the external again they go blue screen of death on me and I can't see what I'm doing to undo what I did!! I tried hitting the manual reset on the screen itself, which I didn't really think would work but hey, desperate times...
After some research on the internet I found out that, contrary to what the other thread says, not all Tiger enabled computers can run the rotation function, apparently because the scan rate, or something like that is too low. Which is why the option was disabled when only the main screen was running. Nice to know and would have been good to know sooner but what I need help with now is HOW DO I FIX THIS MESS?!!!! Some sites mentioned archiving (I'm moderately computer savvy but I'm not totally sure I know how to do that) and some have mentioned the boot disk, which I have but I want to make sure I know what will happen if I do that. I've backed up my files just in case. Will it erase the programs I've installed or just my settings? Or is it much simpler and is there something in the utilities I can mess with that will reset stuff?
I'd like to add a larger (21" - 24") external monitor to my late model 15" MBPro, but don't want to spend $999 on the Apple Thunderbolt display. What should I look for in an after market external monitor? How would I connect it to my MBPro ports?
Info:
MacBook Pro, i7, 8G RAM, Mac OS X (10.7.3)
I keep seeing articles since yesterday stating that the new MBP retina display supports 3 external monitors and the new Macbook Air supports two (through just one ThB port?) but how come no one says anything about the new regular MBP's support? If the Air supports two isn't the regular MBP also supposed to be able to work with two external monitors?
Info:
MacBook, Mac OS X (10.7.4), iPhone 4, iPad 1
My mac will not automatically detect displays, and even sometimes requires a restart. I've reset SMC, PRAM, repaired permissions, and cleared the caches.
View 11 Replies View RelatedIs it possible to get the following:
1. miniDP -> DVI
2. DVI -> VGA
3. DVI -> HDMI
and connect different displays. Or will there be troubles because of the double converters (first to DVI and then to VGA or HDMI).
I just plugged in my Cinema Display to my MBP for the first time, and for a while couldn't figure out why the heck the computer wasn't recognizing it (though maybe I'd gotten a bad MDP/DVI adaptor).
Then I'd noticed I'd set it via gfxCardStatus to use Intel graphics only. I released it to Dynamic -- and voila! Display recognized. Interestingly, it now also will not accept being set back to Intel only with the monitor connected.
How many external displays dose the Retina MBP support? I have herd conflicting information about this, an apple store employee told me that it could support 2 thunderbolt displays while simultaneously running a HDMI connected display (witch would be awesome if true) but I am extremely skeptical, that seems like to much for one GPU.
Info:
MacBook Pro with Retina display
I have a blackbook running 10.6.4 with a GMA 950 that I use dual monitors with. If I use the extended desktop mode, and drag a safari window with a flash player onto the external display it will freeze and become unusuable (can't interact with it). The audio will still play through the speakers, and dragging the window back onto the main display brings back the flash functionality. This is a fairly new problem, it never used to happen before.
View 7 Replies View RelatedMy late 2011 MBP (lion 10.7.3) used to connect to external displays through a VGA cable. It has stopped doing so since recently and I am trying to find out why, and how to fix it. The only changes I've applied to the system are (1) connect to a Thunderbolt display and (2) installed gfxCardStatus. The MBP and Thunderbolt display work flawlessly together, with network, USB, and firewire connections operating. gfxCardStatus has noticably increased my battery life (so I recommend it) and I'm aware that it needs to be in dynamic or dedicated GPU mode for external displays. The VGA external displays do not work when gfxCardStatus is running in either dynamic or dedicated mode, or when I disable gfxCardStatus completely so that it does not show on the process list.
Info:
MacBook Pro, Mac OS X (10.7.3)
I have two questions:
1. Is it possible to use two external displays either mirrored or not and turn off the retina display, and if so how it is done?
2. Is it possible to close the MBP and use an external keyboard while using two external displays?
I am using a music production DAW Persons Studio One-2 Pro and it would be great to be able to have this type of a setup.
Macbook Pro 15" Retina display I7 2,3mz 500gb SSD late 2013 OSX Yosemite 10.10.1
Info:
MacBook Pro (Retina, 15-inch, Late 2013), OS X Yosemite (10.10.1)
I currently have a 15inch MacBook Pro with final cut studio, I use an external HD monitor for my main editing and the MBPs display for secondary. I am running out of screen real-estate for my secondary and want to get a 3rd monitor. The only problem is that there is not way to upgrade the graphic cards in the MBP. My question is: How can i have a total of 3 displays all displaying different images(ie. not mirrored).
View 4 Replies View Relatedi have a MBP uniboddy and a 24" LED cinema display. Is there a way for me to connect my old 17" display so i have 2 eksternal displays? (the 17" dispaly has DVI connection)
View 9 Replies View RelatedI have the new macbook unibody, and use it from time to time to dsiplay things to an external montior, plasma, projector, etc. Using a mini-display adapter to a converter to get s-video was a challenge, but I figured it out. I have used this many times, as I am a DJ and need s-video out to connect to most devices.I was at an event saturday night, and the display on the external device (projector) kept displaying my desktop, NOT the external feed.
It was NOT set up for mirroring, as it seems like the displays were 'switched'. I had my desktop on the projector, and my external on my macbook pro monitor. I tried to fool around with arrangement and resolution, but to no avail. I understand that sometimes you have to drag your source to the right (of left) to get it to display on the external, and this was done, but it was still reversed.I know it was something simple to get the 2 switched back to the way it should be, but I could not figure it out. Any advice? None of my apple buds can figure this out.
It is possible to connect 2x ext. Displays on the new MacMini (Mid 2011). I am looking forward to connect a HDMI flatcreen and a 20inch DVI display
View 2 Replies View RelatedScreen has zoomed in. How do you get it back to normal
Info:
iMac, Mac OS X (10.5.8)
I'm using a mini display port to dvi adapter and dvi cable. 17" macbook pro is several years old and software is up to date.
the first picture is from the imac, the second is from the laptop.
Info:
iMac, Mac OS X (10.6.7)
've got a 17" MacBook Pro, native resolution 1920x1200, which is quite high in terms of pixel density (132 PPI). I have a 24" external Samsung display, also 1920x1200, which means the pixel density is a lot lower (94 PPI). It works fine, but (as you might expect), screen items increase in size rather noticeably when I drag from the laptop display to the external display. (The 24" LCD Apple Cinema Display is also 1920x1200, so also 94 PPI and the same thing would happen). I've been looking all over the place, and I can't seem to find an external display in the 20-24" range that has a resolution higher than 1920x1200. Ideally I'd like to find a display with the same amazing pixel density, so everything is the same size on both my laptop display and on the external display. I don't know what that would be--probably something like 2048x1152 on a 20" or 22", and 2560x1600 for a 24". Even Apple's 30" Cinema Display at 2560x1600 (or what I imagine will be the new 27" LCD coming out later this summer, probably at 2560x1600) would suffer from this problem, because while the resolution is great, the screen size is so large that the pixel density would still be lower than 132 PPI and once again screen items would increase in size when moved from the laptop monitor to the external monitor. I don't really care about screen size or cost. I'd buy a 20" display, or a 30" display, if the pixel density were identical to (or at least close to) the pixel density of my MacBook Pro. Anybody know where I can find something like this?
View 3 Replies View RelatedMany are having issues with font smoothing not working correctly on external displays with SL 10.6.
I researched this issue and found this blog posting:
URL
the blog itself discusses the issue, and the fix is found in the comments.
Basically, for now the fix is to open Terminal App and enter:
"defaults -currentHost write -globalDomain AppleFontSmoothing -int 2″
without the quotes, and hit return.
a log out or restart might be required.
this fix seems to stick even after re-boots and shut-downs.
Post your Air size and config for comparisons Here is mine: Mac Air 13' Fully spec'd 4gigz/2.13 c2d Hooked up to the new 27 cinema display - air display off/closed. I'm using istat nano to report: Currently surfing with chrome, couple tabs open, itunes streaming mp3
HD 40c
CPU 60-61
Heatsink 39
Enclosure 33
Northbridge 54
Mem 38
Power supply 35
The only thing that really changes drastically for me is the CPU temp. I mostly hover around 48 at idle.
Just purchased an Asus MX279H monitor to connect to my 2012 MacBook Pro (OS 10.9.4). I'm using a 10ft DisplayPort to HDMI cable from CableMatters. Picture display is working great, but I cannot get the sound from the monitor speakers to function. The audio output cable to headphone jack doesn't work either. I've even tried to configure the audio device via the Audio MIDI utility on the MacbookPro. I can test the monitor speakers via this utility on the computer, but still cannot get the computer output to communicate with the speakers.I thought a cable would be a better option than using the VGA to DisplayPort Adapter.
Info:
MacBook Pro, Mac OS X (10.7.5), iTunes 11.1.3
I've read a lot about how the unibody alu Macbook have far better graphics than the old Intel graphics chips. My question is, however, what kind of frame rates do you get if you play games at 1900x1200 resolution on an external display? How do games like Unreal Tournament 2004, Civilization 4, WOW and others perform? Is it playable or should I get a Macbook Pro?
View 2 Replies View Relatedwhy does bootcamp boot up slow without optical drive hooked up?
View 1 Replies View Relatedhow do I remove permissions on a drive that I took out of a macbook and hooked up externally?
View 1 Replies View RelatedWhen it did show the screen saver the mouse arrow was on the tv and not on the computer and there were no icons to be found on the tv to click on. Right clicking would only bring up the screen for setting the background pictures.
Info:
MacBook Pro, 13" bought in 2012
I'm just wondering what the cheapest way to go about this is. Currently my graphics card is the 8800, but I think I've read that you don't have to have the same graphics card to add more monitors (the ATI base graphics card will do just fine). So do I just need to purchase one from apple or am I able to get one cheaper from anywhere else? Also all of the supported graphics cards output 1920X1080 right? And on a side not - this output will be going to my television - is there any way to make front row default to the television output?
View 5 Replies View Related