MacBook :: Trackpad Firmware Doesn't Update And Now Stopped Working (Lion & 13 Unibody Late 2008)
Jun 21, 2012
I bought an oldish MacBook 13' Unibody (late 2008) and when I got it one of the first things I did was to install Mac OSX Lion.Â
Everything was working fine, until I applied an update that made the trackpad stop working (it only accepts clicks, no touch is recognized).Â
This is the "Trackpad Firmware Update" from the automatic updates.Â
When starting this firmware update it appears a window with a status message, cancel and Update buttons. After clicking the update button, it starts installing, appears to complete, status changes to "Finishing...", and Update button comes back active at some point. Â
After that I have tried (unsuccessfully):downloading and installing the update directly from Apple Support [URL] thing, but using the 'root' accountleaving the computer on overnight to see if actually "finished" the processReset PRAM PVRAM - [URL] - [URL] palm pressing over 30 seconds on the trackpad (read this on another thread...?)Â Â
Info:
MacBook, Mac OS X (10.7.4), MacBook 13 Unibody (late 2008)
View 3 Replies
ADVERTISEMENT
Apr 19, 2012
I Have an October 2008 Macbook Unibody 13.3 and after installing Lion the CPU fan stays permanently on and the battery drains in 2 hours. What can I do to fix this?
Info:
MacBook (13-inch Aluminum Late 2008), Mac OS X (10.7.3)
View 1 Replies
View Related
Dec 10, 2010
I just got my macbook about 2 days ago I turned it off once and updated the software on it and when I turned it back on the trackpad stopped working. The pointer works when I use a USB mouse.
View 2 Replies
View Related
Apr 26, 2012
Does the late 2008 unibody Macbook pro have Sata II or III?I have an Apple branded 256GB SSD and It isnt booting up as fast as I think it could be. I am wondering if my logic board supports sata III because I think the SSD could be Sata II. Â
Info:
MacBook Pro, Mac OS X (10.7.3), SSD 256 GB with 8GB of RAM
View 1 Replies
View Related
Mar 12, 2010
I've noticed recently that occasionally my screen will intermittently flicker.
It doesn't seem to be tied to anything specific. Just a random black screen flash.
View 6 Replies
View Related
Mar 2, 2012
I recently purchased a Late 2008 Unibody MacBook. I am thrilled! Yet I seem to be having the same charging issue MANY other people have had and have still not found a solution. Basically, as with everyone else, when I connected the Magsafe connector, it stays on finishing charge as if stuck there. I have left it for 2 full days and nights now with no luck. I have calibrated the battery and it is still doing it. The battery only shows 60 cycles and it's health it at 80%. I've even reset the SMC with no avail.
Info:
MacBook, Mac OS X (10.7.3)
View 8 Replies
View Related
Mar 3, 2012
problems with the EFI-Update for MBP, late 2008. It does not work at all, I've retried this several times and my Laptop just gets a grey Background, the bar at the top stays, I can move the mouse and click on the "apple" - but that's it. Â To get my Laptop back to life I had to hold the powerbutton and restart. The same happens now when I just want to shutdown my Laptop, grey background etc.
Info:
MBP 2,4Ghz Core2 Duo
View 5 Replies
View Related
Nov 3, 2008
I did this for the Macbook Pro's a while back, but I'm a Macbook guy now. There are a few other threads with profiles but it's no good if you use a profile made from a different panel than what you have. I'm just trying to consolidate things here.
I will try to keep this post current; please only submit profiles created from hardware, not those done by human eye (meatware?) And be sure to say which panel the profile is for. Thanks to everyone for contributing and improving the Macbook experience!
How to determine your panel type/code
How to install and use color profiles
Basic tests to determine if a profile is a good fit:
Black level
White level
Gamma
9C89 (LG)
See attachment (rezonat0r-9c89.zip)Spyder3 Pro. 2.2 Gamma, Native and 6500K whitepoint. I recommend using the Native whitepoint.See attachment (rezonat0r-9c89-alt.zip)Spyder3 Pro. 2.2 Gamma, Native whitepoint. This is an alternate profile made from another Macbook with the LG panel. It is similar to the previous but slightly darkerjessica's profileSpyder2 Pro. 2.2 Gamma. Native whitepoint (I think - not confirmed)
9C8C (AU Optronics)
See attachment (rezonat0r-9c8c.zip)Spyder3 Pro. 2.2 Gamma. I only did a calibration at native whitepoint (honestly, if you really need 6500K then you won't be using a Macbook screen, or any laptop screen for that matter)
9C8A
See attachment (rezonat0r-9c8a.zip)Spyder3 Pro. 2.2 Gamma. Native whitepoint.
View 24 Replies
View Related
Mar 30, 2012
I have a late 2011 macbook pro running OSX Lion, and it wont update the firmware to 2.7, it downloads the update then says its installing it but when i go back to software update it keeps coming up saying it needs to be updated. Im wondering what can i do to stop this or get it to update.
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3)
View 1 Replies
View Related
Mar 15, 2012
Having been able to use most of the multi-touch gestures yesterday, this morning only the single-finger tap, 2-finger tap and 3-finger double-tap are having any effect. Swiping left, right, up or down with 4 fingers has no effect (although 3-finger drag in Google maps is working, together with 2-finger scroll).
Info:
Mac mini (Early 2009), Mac OS X (10.7.3), 2GHz 8GB
View 2 Replies
View Related
Mar 25, 2009
For some reason i purchased this three weeks ago. Everything was working fine. However today i guess i closed the lid and then when i opened it, the computer didn't wake up. So i just held the power button and restarted. It booted into Leopard fine but now the trackpad and keyboard don't work....
The trackpad and keyboard seem to be fine when i hold the option key too choose what volume to boot from. It seems for some reason the keyboard and trackpad lose its function once it boots into leopard.
I looked up forums and tried numerous things like VRAM wipes, SMC reset, tried external keyboard and mouse and they only work up until it actually boots into the leopard OS. Tried going through a hub and same problem.
View 10 Replies
View Related
Jul 3, 2009
Here's a bit of a strange one, noticed over the last couple of days that the start up chime was getting quieter, then today no sound what so ever when turning it on.
Now from my understanding of it, the chime is a bit like a POST beep on a PC? Hear it once and every thing's fine? Otherwise the MBP is booting up fine, dual booting it and have sound in OS X and Win 7?!
Suspect I may have a HDD issue, as had to run chkdsk /f /r the other day and had to stop it after 12 hours as it was still on stage 4 of 5 @ 18%, and it seems to be running slower, also the HDD is becoming more vocal.
I'm going to run a full AHT on the unit, was just wondering if anyone else has come across something like this before?
View 4 Replies
View Related
Jun 2, 2010
So I bought my unibody macbook the first weekend they came out.
It's been great till this point, however over the past month, the click stopped working.
it started off acting strange, then got to the point where only certain parts of the button would actually click, and now it doesn't register at all.
View 4 Replies
View Related
Jul 8, 2009
I updated my AEBS n to the new firmware, and it stopped working completely! Just wasn't showing up in airport utility. So I did a hard reset and put it back to 7.4.1. Now I am having an intermitent problem with the signal strength. Basically I'll get full speed sometimes them sometimes it'll go off air, either hang the connection,not load the page at all or completely disappear from my task bar.
View 6 Replies
View Related
Feb 10, 2009
It seems that during my afternoon class, I shut down my macbook and then when I went to use it about 10 minutes later the keyboard nor the trackpad works. Now the keyboard/trackpad is not defective as it works via the OSX install cd and it works in Windows Vista (dual booted) When ever I start up OSX it just comes up and the mouse is in the upper left hand corner, and the keyboard doesn't work at all. I have tried a pram reset by pressing command + option + p + r and that did nothing. When I am in OSX the only way to get out is to hold down the power button till the macbook turns off. What else could be wrong is there anything I can do, the nearest Apple store is about 80 miles away so I am trying to avoid that at this point as it seems like a software issue.
View 2 Replies
View Related
May 20, 2009
So recently my keyboard and trackpad stopped working after a restart, none of the keys or the trackpad worked, however, the power button works for some strange reason. I haven't installed any software previous the restart, it's strange why this is happening.
View 7 Replies
View Related
Apr 6, 2012
I have owned my MacBook Pro for about 3 years and just a couple of weeks ago the trackpad stopped working when I clicked on it. I can still use it by finger touch but I can no longer left or right click on it. I have been using a mouse for the past week so that I can right click.
Info:
MacBook Pro, Mac OS X (10.5.8)
View 2 Replies
View Related
Apr 21, 2012
Keyboard and Trackpad stopped working suddenly
Info:
MacBook Pro, Mac OS X (10.7)
View 4 Replies
View Related
Jun 28, 2014
The zooming function on the trackpad stopped working on my Mac Air OSX 10.9.3. I've already checked the trackpad preferences to make sure I didn't inadvertently alter something. It worked fine in the morning then when I woke my computer in the afternoon the zoom no longer worked. I use this function constantly so I hope something is not broken.
View 1 Replies
View Related
Feb 29, 2012
Installed the 2.8 firmware update on my late '08 macbook pro and after restarting it, it would just beep 3 times and not start up. I pulled my 8 gig kingston ram out, repositioned back and still the same issue. Slapping in the original 4 gigs of apple ram, it will start up and work fine though. Is there a fix to get the 8 gigs working again on the machine?
Info:
MacBook Pro, Mac OS X (10.6.8)
View 4 Replies
View Related
Jun 13, 2012
I've installed Thunderbolt firmware update 2.1. Now, When I've started again my computer, Macbook Pro with retina display and Macbook Air doesn't work. I've tried install this update with Snow Leopard and Lion system.
View 2 Replies
View Related
Jul 29, 2010
Yesterday Apple released Safari 5.0.1 and Magic Trackpad and Multi-Touch Trackpad Update 1.0, but Software Update on my Mac makes me able to download only the first one (Safari 5.0.1) - which I did. Why can't it find the Multi-Touch Trackpad Update?
- My MacBook is fine (it's 13-inch, Mid 2009).
- My OS is fine (Mac OS X v10.6.4).
Sure, I can download it manually, BUT it makes me really annoyed if something on my Mac works not as good as it should.
View 10 Replies
View Related
Mar 4, 2008
Well just installed XP on my boot camp partition. Here is my issue:1. The trackpad doesn't seem to be working properly. It's showing under device manager fine but the 2 finger right-click option isn't working. 2. Is the keyboard supposed to be backlit in XP?3. The sound buttons on the keyboard are not working (f11-f12)
View 5 Replies
View Related
Mar 18, 2009
Today I was working with some work and put my laptop to sleep by shutting the lid. Less than half an hour later I opened it and the keyboard and trackpad were both unresponsive. I tried everything but nothing worked so I shutdown the computer by holding the power button down. I then restarted it and they still wouldn't work so I was unable to login. I have also tried an SMC reset but this was to no avail either.
View 3 Replies
View Related
Aug 28, 2010
The trackpad on my iBook G4 1.44ghz stopped working this morning! At first it went stuttery. I temporarily solved this by plugging in a mouse- without using the mouse itself, this seemed to make the trackpad responsive again.
After letting the iBook go to sleep, the trackpad doesn't work at all; nothing I do seems to make it respond. I've tried resetting the PRAM and NVRAM, but this hasn't done anything.
Is there anything else I can do, short of buying a new trackpad?
View 1 Replies
View Related
Jun 20, 2012
Quicklook has stopped workingon my MacBook Pro OS 10.6.8. Pressing the space bar on a file yields nothing. Is there a way to update or reset it so it starts working again?
Info:
MacBook Pro (17-inch Mid 2009), Mac OS X (10.6.8)
View 5 Replies
View Related
Feb 10, 2012
Sound is working fine on my MBA - but when i plug anything into the headphone jack i hear a millisecond of sound then nothing, as soon as i take it out again, it is still playing fine through built in speakers. I think it started happening after i downloaded and installed the latest update but i'm not 100% sure. Tested headphones, stereo etc. and nothing, working. (stereo & headphones work fine through iphone etc. so it's not the cable or the jack) It also does seem like it takes longer for the MBA to recognise something is plugged in? could be a software bug on the new update?
Info:
MacBook Air, Mac OS X (10.7)
View 3 Replies
View Related
Feb 28, 2008
Yesterday I had a Leopard software update which included new keyboard firmware. I did the update and the keyboard continued to function normally. This AM I booted my MacBook Pro and discovered the keyboard no longer responds to inputs. However, the MB does responds to an external USB keyboard.
Now I don't know if I have a sudden hardware problem or the MB keyboard is not working as a result of the firmware update. Has anyone else experienced a similar problem? Can I go back to the earlier revision of the keyboard firmware?
Hmmm - while writing this I just realized I have a bootable image of my system made a few week back on an external drive - I'll have to try it.
View 13 Replies
View Related
Jul 5, 2012
Just bought a new SSD I plan to swap into my MacBook pro (mid 2010 6.2). I plan on clean installing osx Lion and thought I would try to make the installation go as smoothly as possible by updatingthe firmware, if needed, on both the new drive and the MacBook pro.
-Model: MacBook Pro 6,2 (mid 2010) - 15" i5 2.4ghz
-Current Boot ROM: MBP61.0057.B0C
I'm wondering if I need to wait until os x Lion is installed before I install this update? Perhaps it will automatically via "software update" after Lion is installed. It looks like the fix is pertains to osx Lion functionality, so maybe it would've already been downloaded via software update if Lion was installed as opposed to snow leopard which is what I have currently.The article says " If you are unsure whether your computer needs a particular update, simply download and open the update installer. The installer will alert you if the firmware update is already installed or not needed." Which update installer are they referring to and where can I get it? I thought it'd be better to update the firmware prior to installing the os, but maybe that's just an old habit I picked upnwhile using windows.
Info:
MacBook Pro, Mac OS X (10.6.8), mid 2010 6,2 15" 2.4 core i5
View 7 Replies
View Related
Dec 25, 2010
My macbook pro's (late 2008) keyboard and trackpad stopped working about a month ago. I've been trying to get it working again, but to no avail. It initially stopped working when I updated my software. It got stuck on the startup screen after restarting from the install, so I had to hard shut down and restart. When I turned it back on my keyboard and trackpad didn't work.
I restarted again and it worked. Since then it's been going in and out and now it's finally stopped working all together. Since I'm pretty sure it's a software issue I wanted to reformat my computer. Problem is that I can't hold down the option key to boot it from my install disk! And I had to type all this from my usb mouse, and type each key on the keyboard viewer.
View 1 Replies
View Related
