Quicklook has stopped workingon my MacBook Pro OS 10.6.8. Pressing the space bar on a file yields nothing. Is there a way to update or reset it so it starts working again?
Info:
MacBook Pro (17-inch Mid 2009), Mac OS X (10.6.8)
a few days ago, (after reseting my computer with time machine) my Quick Look stoped working. all that hapens when i hit the space bar (or any other way of opinging quicklook) is the big grey box with nothing in it. I can still see the prevews of the items with coverflow.
When i checked console i got this message every time i trie to open a file " Finder[103]: [QL] Display bundle <QLGenericDisplayBundle: 0x11638e120> did not return a layer although it was required to because it did not return a view either."
My Quick Look just stopped working yesterday. I hit space bar and nothing happens. Same if I hit the Quick Look icon in Finder.
View 3 Replies View RelatedQuick Look has stopped working for MP4 file types. If I rename to M4V, Quick Look shows previews and thumbnails in finder. I have run:
$ qlmanange -d 1 -t test.mp4Â
It reports:Content type UTI: public.mpeg-4. Generator used: None. If I tell it to use -c public.movie, it does show the preview. What do I need to do to get my Quick Look working again?
Info:
MacBook Pro, Mac OS X (10.7)
appleworks 6 has stopped working since upgrading to 10.6.8?. any ideas?.
Info:
iMac, Mac OS X (10.6.8)
I have quite the issue. I just upgraded to Snow Leopard (from Leopard) via USB install disk [thumb drive with Snow Leopard .dmg, Mac OS journaled formatted, GUID...] and everything seems to be working just fine EXCEPT...
My interwebz stopped working!
The airport seems to be working and recognizes the other networks in range, and says that it's connected. When I try to load a page, Safari continues to try and load but eventually says that the 'page can't be displayed'.
I've tried everything - Resetting router, switching browsers, renewing DHCP Lease, toggling airport,etc. It won't even work via ethernet cable from the router. I've read some other people that have had these issues but have not seen any fixes.
Running a Unibody Macbook Pro 2.8 GHz, 4GB RAM
I'd really appreciate any feedback you guys have. If you are having the same issue, please post here so we can collaboratively figure this out.
I went to use my tablet today, and nothing happens. It shows up in the USB bus list, but when I check the System Preferences under the Wacom icon, it says no tablet is connected. I tried d/l'ing the latest driver from Wacom[a 2010 update for my Intuos], with the same result. Could this havee something to do with the iTunes update that fixed a drag and drop bug?
Info:
Pro Mac 2.66, Mac OS X (10.6.7)
"Photoshop CS" and "Acrobat 6.0 Standard" suddenly stopped working in my iMac, apparently after I upgraded it to MacOS 10.6.8 (the latest version of Snow Leopard). Both programs had worked normally until that OS upgrade. I deleted Photoshop CS and tried to re-install it from the original CD, but the installation never proceeds because I get an error message entitled: "Install Adobe Photoshop CS quit unexpectedly". This is the full error message:Â
Process:Â Â Â Â Â Â Â Â LaunchCFMApp [1516]
Path:Â Â Â Â Â Â Â Â Â Â Â /Volumes/Adobe(R) Photoshop(R) CS/Adobe(R) Photoshop(R) CS/Install Adobe Photoshop CS.app/Contents/MacOS/Install Adobe Photoshop CS
Identifier:Â Â Â Â Â com.MindVision.InstallerVISE
[Code]...
I have a macbook 2,1, the white one. Has anyone else had their regular built in sound just stop working right after upgrading to snow leopard? I can get sound to play through headphones, but once I up plug them the little sound icon in the menu bar will grey out and I will not be able to get sound to play through the internal speakers.
If I go to the Sys Pref > Sound > Output Pane, it will say "The selected device has no output controls" in the Settings for Selected Device section.
I upgraded my girlfriends laptop to Snow Leopard even though she could care less. Now she's all mad cause the sound doesn't work.
Mail suddenly stopped working with Comcast. They said it wasn't them.
View 1 Replies View Relatedmy keyboard function keys just stopped working
Info:
iMac, Windows Vista
I installed 10.5.7 yesterday. Immediately after the installation was complete, my Apple bluetooth keyboard stopped working. Went into Bluetooth system settings, and it said that there was no bluetooth hardware found... (it's built into the machine!!)...
Also, every time I start iTunes, it gives some weird error about Adobe Flash player. I'm not at home now so I don't have the exact wording of the error with me, sorry...
USB Tethering stop working (while WiFi and Bluetooth tethering continue to be ok) on Mac 10.6.8 (Snow Leopard fully updated) after my iPhone device has been updated from iOS 5.0.1 to 5.1.The present issue is not related to the iPhone (Personal Hotspot ok, Carrier/APN settings ok). Moreover, USB layer seems to be ok on Mac also due to the fact that iTunes recognizes it correctly. Network Services on Mac are instead affected. Steps to Reproduce:1. Remove 'iPhone device' from Network Preferences;2. Connect iPhone via USB cable to the Mac;3. A new 'iPhone device' does not appears while the /var/log/kernel.log says:[DGMTP_Drv.cpp][probe()][00103][ERRO] Current vid (0x05ac) and expected vid (0x04e8) is not matched Other interesting information preceding the mentioned above error on kernel.log are:kxld[com.apple.driver.AppleUSBEthernetHost]: The super class vtable '__ZTV20IOEthernetController' for vtable '__ZTV20AppleUSBEthernetHost' is out of date. Make sure your kext has been built against the correct headers.Mar 13 15:08:25 carlo kernel[0]: Can't load kext com.apple.driver.AppleUSBEthernetHost - link failed.Mar 13 15:08:25 carlo kernel[0]: Failed to load executable for kext com.apple.driver.AppleUSBEthernetHost.Mar 13 15:08:25 carlo kernel[0]: Kext com.apple.driver.AppleUSBEthernetHost failed to load (0xdc008016).Mar 13 15:08:25 carlo kernel[0]: Failed to load kext com.apple.driver.AppleUSBEthernetHost (error 0xdc008016).
Info:
Mac Book Pro 15''
This morning I've installed OS Snow Leopard 10.6.3 on my iMac, previously I had OS Tiger 10.4.11 running. Everything seemed fine until I restarted and then I started getting "USB drawing too much power" promps all over the place even though the only thing that's attached to the iMac is the keyboard and the mouse (they both work fine). The process went like this:The iMac is a 2.4 GHz Intel Core Duo from october 2007First I did an upgrade of my RAM, from 1GB to 2GB, that went ok.Then I runned the install dvd for Snow Leopard, I did not perform a clean install, just did it over my old data. After restart, everything worked but i got this USB warning message, one of them. At that point my usb's still worked, (even though the warning) I could print and scan. To get rid of the warning, i resetted the PRAM and SMC. After doing so, the promps multiplied and my usb ports ceased working, except for the keyboard and the mouse attached to it.I've done the Apple Hardware Test, and it gives no malfunctions.Firewire works fine, Isight buildt-in camera and bluetooth too.I've tried all usb's and the keyboard will work in all of them, not like my printer and scanner which are completely ignored.USB power warning also appears at restart with no deviced connected (no keyboard and mouse, i've tried).I've also found in many forum entries the possibility of a problem on the logic board, but since i've never had a problem with my imac until today i would not be sure about a hardware malfunction.The last thing i've found around that could be a clue is something about the kernel extensions, but that's complete chinese for me, I'm a mac plug&play user and not too much of a mac expert.
Info:
iMac, Mac OS X (10.4.11)
MS Excel and MS Powerpoint (2011)does not work on my Macbook Pro after installing (updating) to 10.6.8. MS Word does though. Extremely irritating.
Info:
MacBook Pro, Mac OS X (10.6.8)
Internet working OK. Software Update produces the regular display with a dropdown panel containing "The Software Update Server (su.ccukdev.net) is not responding." and two choices "Network Diagnostics" and "Quit". The Network checks out OK.
Info:
iMac, Mac OS X (10.6.8), Recent repair
I just got my macbook about 2 days ago I turned it off once and updated the software on it and when I turned it back on the trackpad stopped working. The pointer works when I use a USB mouse.
View 2 Replies View RelatedAs the title says, after I updated to 10.6.2, two-finger swipes suddenly stopped working on my Magic Mouse! It was working perfectly fine before.
View 4 Replies View RelatedSound is working fine on my MBA - but when i plug anything into the headphone jack i hear a millisecond of sound then nothing, as soon as i take it out again, it is still playing fine through built in speakers. I think it started happening after i downloaded and installed the latest update but i'm not 100% sure. Tested headphones, stereo etc. and nothing, working. (stereo & headphones work fine through iphone etc. so it's not the cable or the jack) It also does seem like it takes longer for the MBA to recognise something is plugged in? could be a software bug on the new update?
Info:
MacBook Air, Mac OS X (10.7)
I use Safari to download my banking information. After the last Safari upgrade (5.1.4) I can log on but cannot open links to the different accounts. I can "exit" but cannot navigate deeper into the site.
Using early 2008 MacBook Pro 15 with Lion. It won't work using my iMac but will work using Internet Explorer on a PC.
Info:
Mac Pro, Mac OS X (10.7.3)
After upgrading to Yosemite, my computer is no longer an option in the sound preferences. I can't hear anything.
View 2 Replies View Relatedduring SW to my mini-mac wireless key board the keyboard stop responding. now i have left without an ability to work with my wireless keyboard. is there any why to reset the keyboard to default setting so it will come to live again..
I bought an oldish MacBook 13' Unibody (late 2008) and when I got it one of the first things I did was to install Mac OSX Lion.Â
Everything was working fine, until I applied an update that made the trackpad stop working (it only accepts clicks, no touch is recognized).Â
This is the "Trackpad Firmware Update" from the automatic updates.Â
When starting this firmware update it appears a window with a status message, cancel and Update buttons. After clicking the update button, it starts installing, appears to complete, status changes to "Finishing...", and Update button comes back active at some point. Â
After that I have tried (unsuccessfully):downloading and installing the update directly from Apple Support [URL] thing, but using the 'root' accountleaving the computer on overnight to see if actually "finished" the processReset PRAM PVRAM - [URL] - [URL] palm pressing over 30 seconds on the trackpad (read this on another thread...?)Â Â
Info:
MacBook, Mac OS X (10.7.4), MacBook 13 Unibody (late 2008)
I had a goodworking SUS (10.6.8) working but the drive is getting full so i change the location of the files to another disk (in the xserve)and follow instructions from Apple (page 84 from the manual System Imaging) sudo cp -p /private/var/db/swupd/html /Volumes/My_Volume/My_Software_Updates_Folder/This works and i copy the files to a new drive. I also change the SUS so that theu host files for Lion clients url..works also, start SUS in Server Admin but when clients wants to connect i get an error that there is no SUS available and when i use the browser for an check i get een Forbidden error url...ForbiddenYou don't have permission to access /index.sucatalog on this server.Apache/2.2.21 (Unix) Server at 127.0.0.1 Port 80.
View 1 Replies View RelatedMy MacBook's USB that near the shift key suddenly stopped working. Other works fine. cause I need to have both ports work. HOW do I solve this?
View 14 Replies View RelatedI have been connecting wirelessly to the same router for about 4 months now, using DHCP, and having the settings on the automatic connection. I left the computer on, but closed, so sleeping, for about two days. When i opened it, the battery did not yet run out but the internet has not connected since.
I have full connection in internet connect to my network. Status says connected. If I have the IPv4 using DHCP, the status says that i am connected but my computer have a self-assigned IP adress. When I put in the IP manually, the Network setting give me a green light on airport and says that I am connected to the network thru airport. Needless to say, no browsers (Firefox, Safari, Netscape, or Internet Explorer) have been able to connect to the internet.
I have tried running Disk Utility for any errors, but there have been no changes.
Powerbook G4
1.67 GHz PowerPC
512 DDR SDRAM
v. 10.4.11
Apple Mail stopped working after replacing and restoring the Main Hard Drive in the upper bay. Internet connection is good, and the Mail client troubleshooting (Comcast) was no help. I can start the App, but it does not retrieve or send mail through Comcast anymore. I have a MacBook Pro with the same settings and Mail works fine.
Info:
Power Mac G5, 1.8ghz, Mac OS X (10.4.11)
A colleague of mine has a Mac G5 with OS 10.5.8 and Adobe InDesign CS5 installed which has suddenly stopped working. On top of that she can't drag or drop items either. She didn't have this issue yesterday. She didn't install anything new or added any new hardware.
View 2 Replies View RelatedQuick Time player is not working and I can't see apple videos. What can I do?
Info:
iMac, Mac OS X (10.7.3)
My headphone jack was working just fine until this morning when I opened my computer. It's plugged in, but the sound keeps going through the head speakers. I have done the system preference check to make sure it is not muted.
View 1 Replies View Related
