I've installed Thunderbolt firmware update 2.1. Now, When I've started again my computer, Macbook Pro with retina display and Macbook Air doesn't work. I've tried install this update with Snow Leopard and Lion system.
View 2 Replies
After the update, my MacBook Pro is extermely sluggish. Prior to the update, I was zipping along like most happy MacBook Pro owners. After the update, I constantly see the dreaded beach ball when doing almost anything with the laptop, Safari pages take longer to load, etc.
It's almost as if the udpate had the opposite effect and actually throttled down my WD 500GB HDD performance to a large degree.
Like I said, prior to the update all was good. I've been searching to see if there is a way to revert back to the previous firmware to validate that the update caused the problem but I haven't been successfull in finding anything yet.
I've been having an issue trying to install the recent MacBook Air EFI Firmware update version 2.9.1. I have attempted the following:Â
- Installing update via the App Store
- Installing update via Software Downloads from Apple website
- Verifying boot drive using Disk Utility and fixing and partition errors, as well as checking and fixing any permission errors.Â
Info:
MacBook Air, OS X Mavericks (10.9.4)
Just bought a new SSD I plan to swap into my MacBook pro (mid 2010 6.2). I plan on clean installing osx Lion and thought I would try to make the installation go as smoothly as possible by updatingthe firmware, if needed, on both the new drive and the MacBook pro.
-Model: MacBook Pro 6,2 (mid 2010) - 15" i5 2.4ghz
-Current Boot ROM: MBP61.0057.B0C
I'm wondering if I need to wait until os x Lion is installed before I install this update? Perhaps it will automatically via "software update" after Lion is installed. It looks like the fix is pertains to osx Lion functionality, so maybe it would've already been downloaded via software update if Lion was installed as opposed to snow leopard which is what I have currently.The article says " If you are unsure whether your computer needs a particular update, simply download and open the update installer. The installer will alert you if the firmware update is already installed or not needed." Which update installer are they referring to and where can I get it? I thought it'd be better to update the firmware prior to installing the os, but maybe that's just an old habit I picked upnwhile using windows.
Info:
MacBook Pro, Mac OS X (10.6.8), mid 2010 6,2 15" 2.4 core i5
Installed the 2.8 firmware update on my late '08 macbook pro and after restarting it, it would just beep 3 times and not start up. I pulled my 8 gig kingston ram out, repositioned back and still the same issue. Slapping in the original 4 gigs of apple ram, it will start up and work fine though. Is there a fix to get the 8 gigs working again on the machine?
Info:
MacBook Pro, Mac OS X (10.6.8)
I bought an oldish MacBook 13' Unibody (late 2008) and when I got it one of the first things I did was to install Mac OSX Lion.Â
Everything was working fine, until I applied an update that made the trackpad stop working (it only accepts clicks, no touch is recognized).Â
This is the "Trackpad Firmware Update" from the automatic updates.Â
When starting this firmware update it appears a window with a status message, cancel and Update buttons. After clicking the update button, it starts installing, appears to complete, status changes to "Finishing...", and Update button comes back active at some point. Â
After that I have tried (unsuccessfully):downloading and installing the update directly from Apple Support [URL] thing, but using the 'root' accountleaving the computer on overnight to see if actually "finished" the processReset PRAM PVRAM - [URL] - [URL] palm pressing over 30 seconds on the trackpad (read this on another thread...?)Â Â
Info:
MacBook, Mac OS X (10.7.4), MacBook 13 Unibody (late 2008)
I have a MBP 2.66 GHz Intel Core i7 and have tryed to connect a Lacie Thunderbolt eSATA Hub to the Thunderbolt port. Â
1 Will it work with the Thunderbolt Display port?Â
2/ Why won't it see and Thunderbolt devices in the Systems Report?Â
Info:
MacBook Pro, Mac OS X (10.7.3)
Thunderbolt Display Firmware Update 1.2 will not install. I've opened the clamshell on my MacBook Air and the update still fails while the Thunderbolt display is connected to the Air
Info:
MacBook Air, iOS 8.1.1
The new firmware for the thunderbolt display now is making the screen go black all the time. How do I uninstall this update?Â
Info:
MacBook Pro with Retina display, thunderbolt display firmware
Superdrive Firmware Update 3.0 fails each time, /Applications/Utilities/SuperDrive Update.app asks me to quit all apps and try again which I did but of no. I also retried with a reboot.
Info:
MacBook, Mac OS X (10.6.8)
Installed MSOffice on my MBP with SL already installed. Office immediately wants to be updated with a "critical update" which is 200+ MB. Nearing the end of the update I get a message that says the update had a technical error, and it then shuts down. After this nothing in Office works.
Then I tried to post a message on MS's Mactopia forum and it won't let me log in. So I can't post, and I can't create a new account.I dragged the corrupted Office to the trash (their uninstall program wouldn't work either). Reinstalled Office and everything works. But it's not updated.
I have a one year old MBP. A few minutes ago I installed the Thunderbolt Update that Apple released today. At the conclusion of the update, it said it had failed to install and that I needed to restart the Mac. On doing so, I got a kernel panic. And now every time I try to boot, I get a kernel panic.Â
Info:
Mac Pro, Mac OS X (10.7.2)
If rev C runs the GPU at a higher speed and hw otherwise is the same as rev B then why couldn't Apple release a firmware update to let rev BGPU rum faster as well?
View 18 Replies View RelatedJust got this through Software Update. More info here:
[URL]
Quote:
About MacBook Pro EFI Firmware Update 1.8 This update eliminates the noise made by the optical disk drive during system startup and wake from sleep on MacBook Pro computers. When installation is complete, run Software Update again, and install SuperDrive Firmware Update 3.0
To complete the firmware update process, follow the instructions in the updater application (/Applications/Utilities/MacBook Pro EFI Firmware Update.app). The updater will launch automatically when the installation is complete.
I'm using a 13 inches mid-2011 macbook air with OS X 10.7.4 on 12 June, I found the update of Thunderbolt 1.2 in the system update center and I patched it. Luckliy, this patch didn't kill my kernel as it did to many other machines. But I'm still a bit worried when I learned that this updates messed up a lot of users' machines. Now applle announces the newer version of thunderbolt 1.2.1 to correct what was wrong. But no matter how hard I try to check system updates, I don't have it. I know I could try to download it on the website, but is there any valid reason that I don't get this patch? Will install in creating new problems?
Info:
MacBook Air, Mac OS X (10.7.2), Time Machine
[URL] MacBook SMC Firmware Update 1.4 is available either through Software Update or via direct download, and is applicable to the following models:
MacBook (13-inch Late 2007)
MacBook Pro (17-inch, Early 2008)
MacBook Pro (15-inch Early 2008)
MacBook (13-inch, Early 2008)
MacBook (13-inch, Late 2008)
I finally brought the 13in macbook air. What are some good softsleeves for macbook air 13in. I want a soft sleeves that fits perfectly with macbook air and below $30. Is it possible?off topic: this is my first mac computer, how do I update the firmware to 2.0?
View 1 Replies View RelatedI currently have version 10.6.2 update for my macbook pro and after updating the EFI firmware update to 1.8 I get an annoying pop up every time I start the computer. I checked for any additional updates to see if it will go away, but I seem to have all the updates. Is there anything I should do to get rid of this pop up? Pop-up window reads: your computer's firmware is up to date with version 1.8 of the macbook pro EFI firmware update.
View 1 Replies View RelatedJust downloaded new firmware at suggestion of my auto-update app. Since loading, the computer has been trying to reboot for over 45 minutes so far. Grey screen w/ Apple logo and spinning grey wheel...The firmware update info says not to turn off, unplug, etc until rebooted.
Info:
mbp, Mac OS X (10.5.2)
I just ran the latest firmware update for my 2011 mac book pro and after it installed it now won't start up, only getting to the gray screen before freezing there.Â
I've tried all the on line solutions I can find on Apple's site, but no luck.
Info:
MacBook Pro
MacBook Pro EFI Firmware Update 2.8 does not install. I was prompted several times to install and restart (MacBook Pro late 2008) and authorised it each time. In every case, the update was proposed again when Software Update checked. I have OS Lion latest version installed. What to do about this bug?
Info:
MacBook Pro, Mac OS X (10.7.2), photos in Sony Cyber-Shot .jpg
Are there any known compatibiity issues with booting from an OS 10.6.x drive after installing EFI Firmware Update 2.5?I am running Lion (10.7.3) on my MacBook Pro (13-inch, Mid-2010) but have held off installing the firmware update because being able to boot from a 10.6.x backup drive is more important right now than internet-based Lion recovery. If there's no issue booting 10.6.x (and running apps), then I will go ahead and install the firmware update, otherwise I'll wait awhile longer.
Info:
MacBook Pro (13-inch Mid 2010), Mac OS X (10.7.3)
My external monitor stopped working after performing tonight's software updates. 2011 MBA 13inch running 10.7.4. Computer takes 2 minutes to boot to a grey pattern on the MBA and an all blue desktop on my external. Boots fine when I unplug the monitor and reboot.
View 3 Replies View RelatedI did the latest firmware update few days ago and went through that series of boots. It's a shame on me that I didn't jog down the ROM revision info before the update. According to the this link:
[URL]
The FM Rev should be MBA31.0061.B01 after the update.
My MBA 13 is still read MBA31.0061.B00 after I thought I did the update. Does that mean the update didn't go through?
Will updating that firmware bring me trouble if I do it through Parallels?
View 4 Replies View RelatedThis came out yesterday. I have seen no comments anywhere about it so I started this post. Did you update your Macbook? [URL]
View 4 Replies View RelatedI have a uMBP 13' base model. I just received my Western Digital scorpio blue 500g hdd that is SATA 3.0. Should I install the new firmware update before I load anything onto the drive so i can utilize the 3.0Gbps instead of the 1.5Gbps? Should I install it at all? Will I notice a performance bump? I also received 4gb crucial ram, should i install the ram before installing the firmware update? I was wondering if anyone else noticed the screen slightly getting brighter and dimmer, almost in intervals, when it is not plugged into the power cord.
View 4 Replies View RelatedThis update eliminates the noise made by the optical disk drive during system startup and wake from sleep on MacBook Pro computers. When installation is complete, please run Software Update again, and install SuperDrive Firmware Update 3.0. When I boot my system I can hear that sound like ejecting a disk out of the drive like always... Is that noise they refer?
View 24 Replies View RelatedI'm confused why it says "Your computer does not need this update"? It's a MBP4, 1 and has some startup noises and (always has had IIRC) problems with it making noises that don't seem right. I've checked Software Update and there is nothing there (I just ran it and updated a minute ago). I'm curious why it says this, is there a firmware update 1.7 that needs to be installed for the MBP?
View 6 Replies View RelatedI have a macbook 2.4 alu (Late 2008) and Installed linux as soon as I got it.(I just like the cases). Anyway I know that you need to use apple update in osx to update the firmware. I can't dual boot because my HD is MBR. I thought of 2 ways.
A. Install OSX onto a usb device (Cost 30-40 bucks for usb)
B. Take to apple store, Maybe they can do it.
I can't dual boot because my HD is MBR. I heard the new firmware updates stop a lot of issues.
