I updated my AEBS n to the new firmware, and it stopped working completely! Just wasn't showing up in airport utility. So I did a hard reset and put it back to 7.4.1. Now I am having an intermitent problem with the signal strength. Basically I'll get full speed sometimes them sometimes it'll go off air, either hang the connection,not load the page at all or completely disappear from my task bar.
View 6 Replies
I bought an oldish MacBook 13' Unibody (late 2008) and when I got it one of the first things I did was to install Mac OSX Lion.
Everything was working fine, until I applied an update that made the trackpad stop working (it only accepts clicks, no touch is recognized).
This is the "Trackpad Firmware Update" from the automatic updates.
When starting this firmware update it appears a window with a status message, cancel and Update buttons. After clicking the update button, it starts installing, appears to complete, status changes to "Finishing...", and Update button comes back active at some point.
After that I have tried (unsuccessfully):downloading and installing the update directly from Apple Support [URL] thing, but using the 'root' accountleaving the computer on overnight to see if actually "finished" the processReset PRAM PVRAM - [URL] - [URL] palm pressing over 30 seconds on the trackpad (read this on another thread...?)
Info:
MacBook, Mac OS X (10.7.4), MacBook 13 Unibody (late 2008)
Yesterday I had a Leopard software update which included new keyboard firmware. I did the update and the keyboard continued to function normally. This AM I booted my MacBook Pro and discovered the keyboard no longer responds to inputs. However, the MB does responds to an external USB keyboard.
Now I don't know if I have a sudden hardware problem or the MB keyboard is not working as a result of the firmware update. Has anyone else experienced a similar problem? Can I go back to the earlier revision of the keyboard firmware?
Hmmm - while writing this I just realized I have a bootable image of my system made a few week back on an external drive - I'll have to try it.
where can i find the 7.3.1 firmware for the AEBS? I had upgraded at to 7.4.1 and am currently having issues thus would like to restore to the old firmware. But alas I wasn't able to find my old copy. Had look around the net but was mostly point to 7.4.1 firmware.
View 2 Replies View RelatedI installed 10.5.7 yesterday. Immediately after the installation was complete, my Apple bluetooth keyboard stopped working. Went into Bluetooth system settings, and it said that there was no bluetooth hardware found... (it's built into the machine!!)...
Also, every time I start iTunes, it gives some weird error about Adobe Flash player. I'm not at home now so I don't have the exact wording of the error with me, sorry...
I purchased an Epson CX8300 recently to work with my iMac and MacBook. It works fine with both via USB connection. However, when set to print wirelessly via an Airport Extreme Base Station, the print jobs don't ever appear in the print queues on either systems. I tried switching to the Gutenprint driver but this just spits out one blank page after another.
View 1 Replies View RelatedI'm sure there is a few people on here that have made the swap - is it worth it? Is the difference in speed noticible to warrant an upgrade.
My current setup:
2.4 MBPu
Mac Mini (coming soon)
Dell Inspiron
Canon Printer
Touch
Slingbox (hardwired to AEBS)
AE (old school version)
WD 1TB external (connected to AEBS via usb)
All currently connected to a AEBS wireless.
Quicklook has stopped workingon my MacBook Pro OS 10.6.8. Pressing the space bar on a file yields nothing. Is there a way to update or reset it so it starts working again?
Info:
MacBook Pro (17-inch Mid 2009), Mac OS X (10.6.8)
during SW to my mini-mac wireless key board the keyboard stop responding. now i have left without an ability to work with my wireless keyboard. is there any why to reset the keyboard to default setting so it will come to live again..
Installed the 2.8 firmware update on my late '08 macbook pro and after restarting it, it would just beep 3 times and not start up. I pulled my 8 gig kingston ram out, repositioned back and still the same issue. Slapping in the original 4 gigs of apple ram, it will start up and work fine though. Is there a fix to get the 8 gigs working again on the machine?
Info:
MacBook Pro, Mac OS X (10.6.8)
My MacBook's USB that near the shift key suddenly stopped working. Other works fine. cause I need to have both ports work. HOW do I solve this?
View 14 Replies View RelatedI have been connecting wirelessly to the same router for about 4 months now, using DHCP, and having the settings on the automatic connection. I left the computer on, but closed, so sleeping, for about two days. When i opened it, the battery did not yet run out but the internet has not connected since.
I have full connection in internet connect to my network. Status says connected. If I have the IPv4 using DHCP, the status says that i am connected but my computer have a self-assigned IP adress. When I put in the IP manually, the Network setting give me a green light on airport and says that I am connected to the network thru airport. Needless to say, no browsers (Firefox, Safari, Netscape, or Internet Explorer) have been able to connect to the internet.
I have tried running Disk Utility for any errors, but there have been no changes.
Powerbook G4
1.67 GHz PowerPC
512 DDR SDRAM
v. 10.4.11
I've installed Thunderbolt firmware update 2.1. Now, When I've started again my computer, Macbook Pro with retina display and Macbook Air doesn't work. I've tried install this update with Snow Leopard and Lion system.
View 2 Replies View RelatedIntel X25-M 160GB, how do I find out if it has the latest firmware v1.5 from Dec 8, 2009. And is the Solid State Drive Toolbox v1.3 from Mar 22, 1010 worth downloading?Intel's download/support page doesn't tell you how to know if your SSD has the latest firmware or not.
View 8 Replies View RelatedI was installing X-Plane 9 on my fairly new Mac Pro when it stopped working. I switched disks and nothing happened, the drive just won't spin up. I have tried a number of different CDs and DVDs and none will spin up. I can verify that by looking at the position of the disk when I put it in and take it out, it never moves.I have tried the usual reboot and resetting the PRAM. (I did the command option o r and un-plugged with power button for 5 seconds)I tried calling Apple care 2 times and the message I get is, the call center is closed. That's it, they don't even tell what hours they *ARE* open.
View 7 Replies View RelatedRecently my 2 month old (+/-) rev B MBA USB stopped working. When I plug in a thumb drive, DVD drive or anything, the power light on the usb peripheral comes on, but the drive does not mount. I am running SL, and until last week I had no issue.
View 1 Replies View Related a few days ago, (after reseting my computer with time machine) my Quick Look stoped working. all that hapens when i hit the space bar (or any other way of opinging quicklook) is the big grey box with nothing in it. I can still see the prevews of the items with coverflow.
When i checked console i got this message every time i trie to open a file " Finder[103]: [QL] Display bundle <QLGenericDisplayBundle: 0x11638e120> did not return a layer although it was required to because it did not return a view either."
My MBP's (October 2007) screen just stopped working. I don't know what's up. It's not the backlight, because I've turned my backlight off before and you can still see the screen faintly, but I can't see anything. I ran to Target to buy an external monitor - but they were out, so I bought a TV (Sylvania lc195slx) in hopes of that working. Well, it didn't work. I am currently using a newer MBP (September 2009) borrowed for a few minutes from a friend to write this and test the TV.
Her MBP was able to hook up to the TV just fine. So now I'm wondering if there is a video driver error or something. This is really bad timing, as I have to do a presentation on Tuesday for a final and I'm still working on finding the information. Anyway, if you can offer any advice to get the screen and/or tv working, that would be great! And I'm using my DVI to VGA adapter to plug my computer into the tv.
Safari on my iMac (10.7.4) has been acting up recently. Very slow to begin loading my opening Tabs and CPU intensive. Today it has just stopped working at all. It just sits there with high CPU use and nothing loads into my opening tabs. I've tried Google Chrome and it works fine with the same tabs. Tried downloading the latest Safari and installed it, but it didn't help. Don't know what to do next. I've seen all the warnings about not deleting Safari. Is there any alternative to reloading Lion? Can't I just delete Safari from Terminal and then reinstall from my Safari download and import my exported Bookmarks?
Info:
iMac 20" Aluminium and Mac Pro 2008, Mac OS X (10.6.1)
The i key has stopped working on my 2011 Macbook Pro. i've tried taking the key off and cleaning underneath, pressing it hard, pressing on the side, tried turning off text to speech...
All the other keys are working fine. Tried to book a genius bar appt but there are none available and i can't afford to pay for tech support!
Suddenly command-W has stopped working on my system (OS X 10.6.4, iMac 2.66 GHz Intel Core 2 Duo). Instead of closing the current window or browser tab, it takes me to the Finder. I have tried rebooting, but it did not fix it.
View 4 Replies View RelatedMy Quick Look just stopped working yesterday. I hit space bar and nothing happens. Same if I hit the Quick Look icon in Finder.
View 3 Replies View Relatedmy orig.(2 year old charger) stopped working so I ordered another one. The new one doesn't really work, sometimes it does but most of the time not.
View 6 Replies View RelatedI have a WD 2 TB My Book Home Edition external hard drive, I have had it for about a year... it worked fine I had a little over 1 TB of data on the hard drive and after coming home from vacation when I reconnected my hard drive it would not mount. The message was "Hard disk not recognized by this computer" so I properly disconnected the hard drive and replugged it in and reconnected to iMac and still same thing. I have tried everything in the book it feels like and nothing is working, and of course I did not have all the info backup with time machine (I REGRET and beat myself up for not) so I need to recover the data and I am not sure what to do. I did run Data Rescue 3 and it said that there was nothing on the hard drive to recover. Of course I am panicking and I have been told to send it off for Data recovery but that is going to cost up to 2,000 and I just want to make sure that this is my last resort or is it hopeless and should I just seek counseling for all the lost pictures of my kiddos...LOL I did try opening the case and inserting hard drive directly in a hard drive docking station
View 2 Replies View RelatedNot sure why, but all of a sudden have no sound effects. When I go to System Preferences all the alert sound effect choices are grayed out. When press the volume buttons, can't adjust settings and there's a strike-out symbol underneath the bars.
View 4 Replies View RelatedI tried backing up my MBP using Time Machine but my MyBook 500GB doesnt want to work. The light on the front works but when i connect it nothing happens. Nothing shows up on my MBP anymore. It used to work fine.
View 2 Replies View RelatedI have a aluminum iMac, which has been working fine until now. A couple of hours ago I restarted it and went and did something else for a couple of hours. I then came back to find my keyboard and mouse not working, I double checked and they were both plugged in fine (I use the aluminum apple keyboard and a kensington mouse). I restarted my computer but it still did not fix the problem (I was still stuck at the login screen). I thought it might be the USB, so I plugged my iPod in, and it did not charge. While my iPod was still connected to my computer I restarted it again and as soon as the screen turned grey my iPod started charging and my mouse worked (the light turned on), but only until the grey apple logo appeared and it then stopped working again. I have tried every USB slot and none of them work. I'm pretty sure my computer was completely updated as well.
View 3 Replies View RelatedI have had my 24" 2.8GHz iMac from November 2007 flawless until today, 1 of 3 usb ports on the back simply decided to stop working. my keyboard, when plugged in, does not work, however, I usually use this one port with my iPod, when I plug my iPod in, it turns on, says its connected, then ejects automatically, though in the other ports...it works fine in the other ports.
View 3 Replies View RelatedI have a Bamboo tablet and a wireless mighty mouse. The mouse worked for little while but then just stopped working. It still moves but I cant click on some things and it doesnt change the pointer when i go over text for example. Any one know why?
View 1 Replies View Related15" Unibody MBP, summer 20009, latest software updated. Just stopped yesterday being able to do the 3 and 4 finger swipes. Checked system preferences, unchecked and rechecked.
View 3 Replies View Related
