I installed NTFS for Mac to read/write external hard disks that I shared between my Macs and PCs. It's doing find until recently after I upgrade my MacBook to Mac OS Lion.
It can still can detect certain external Hard Disk, but still cannot detect some external Hard Disk and Flash Drive even though it is supposed to be dual formatted.
Info:
MacBook, Mac OS X (10.7.4)
Just installed a new HDD into a macbook pro that was dropped. Seems fine, loads the disk and then says it can install the OS, i load up disk utility and theres no hard drive int he list just the optical drive and the DVD, its not the disk that came with the mac itself its either my proper retail one or the one that came with my personal older macbook which might be the issue. Ive taken apart and reconnected the HDD and all seems fine internally. Are there any issues that cause this except not using a full retail disk which im going to try later on, just wanted to rule everything else out.
View 7 Replies View Relatedtransfer my files from my WD external drive to my MBP but to no avail. I installed them both and after that, my WD Elements wont show anymore. It was working before prior to installing MacFuse & NTFS-3G. So I tried to remove them both but still the same problem. It wont detect my WD external drive anymore. The light on my WD drive is lighted up as usual but can't be found on Finder. I also tried to remove the WD external drive from my MBP and it recognises that my WD is there! Its says did not unmount correctly, something like that. I also tried to isolate the problem using another computer, this time, Windows and it works well.
The Culprit of all this is when I install MacFue & NTFS-3G
I recently just purchased a macbook pro and am trying to convert files from my external hardrive on to my mac. My external was used with my old computer which was a dell so it was run off of windows format. I cannot afford to lose all of this information i have on here. Is there anyway i can convert these files so my MAC will read them without having to delete my files on my external.
I connect my external to my MAC and it says it doesn't read it, i believe it is in ms-dos format.
I recently received a Western Digital 1TB external HD for christmas. It has 2 partitions 1 for time machine backups and another just for some extra space . They are both set to Mac Os Journaled and work fine but when i connected it to my brother Windows laptop to get some music of his hard drive, it wasnt able to find the hard drive. i tried unplugging it and plugging it back in and nothing happened.
View 7 Replies View RelatedI have a Seagate 1 TB Backup Plus Drive which was working perfectly fine until I plugged it into a USB hub. It detected it while in the hub and I was able to get files off of it, but when I ejected it from the hub and put it back into the USB slot on the computer it was not detected by finder. It shows up in the disk utility and I clicked verify and repair and it says:
Verify and Repair volume “Seagate Backup Plus Drive”
Checking file system
Volume repair complete.
Updating boot support partitions for the volume as required.
Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
Is there any way to get this to work properly again? Or if not is there a way for me to recover my files on the external hard drive?
I have a Macbook PRO late 2011 running OS X Mavericks.
I have an Iomega 320GB SPHDU external hard drive which I was using as my backup disk for Time Machine and also to store other files (documents, photos, etc.). I have been using for some time now and never had any problems, however this morning, I plugged the hard drive into my MacBook Pro, which is from early 2011 and on operating system OS X 10.9.4, using the USB ports and the hard drive did not appear in Finder. I checked to see if it had appeared in Disk Utility which it does, but Disk Utility is telling me that the hard drive needs repairing. When I try to repair the hard drive, I get the message 'Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed up files.'
Info:
MacBook Pro, OS X Mavericks (10.9.4)
recently the harddisk of my macbook pro crashed and I had it replaced with a SSD thinking I could use the old harddisk as an external but now it seems like the crashed harddisk cannot be detected by my macbook. What should I do?
Info:
MacBook Pro, Mac OS X (10.7)
I have a new seagate 500gb hard-drive, it is recognized on Disk Utilities and not only that it also says the hard drive is 2tb.
Info:
MacBook Pro
I am trying to pull up my Western Digital External Hard drive after connecting it via USB. I used to be able to open it through Finder and there is nothing showing up.
Info:MacBook Air, Mac OS X (10.7.3)
My external WD 320GB hard drive wont show up on Finder when I connect it up. Ive been having this problem ever since I pulled it out without ejecting it - I know thats bad but my macbook froze and I had no choice.
Now my external hard drive wont show up on Finder, I even tried disk utility and I was able to verify the disk & then repair it, but its like I cant use the hard drive anymore. Every time I try to add files to it or remove files my laptop freezes and I cant do anything.
Its got to the point where all I want to do now is get all my files off this external hard drive somewhow, Is there a way to get my files off this hard drive before its too late if isnt already so.
Info:
MacBook (13-inch Aluminum Late 2008)
My external hard drive doesn't show up in finder.Time machine can't find it. Does this mean my external hard drive is dead?
I borrowed a friends and switched mine with hers. My acted the same way in her macbook. I switched the cords on the external drives, no change.
Also, Is there a way to retrieve the information from my sick external hard drive?
Info:
MacBook, Mac OS X (10.6.8)
So around 5 years ago i got the WD-160JB hard disk drive. I want to see all the things i did back then. I want to be able to connect this WD-160JB drive as a external hard drive to my mac.
What i am wondering is if you can somehow have a cable or something which links the USB from the MBP to the hard disk.
Info:
MacBook Pro, Mac OS X (10.7.3)
i have asus m2n68-am motherboard and amd athlon 5000+ processor, 80 gb sata. when i am trying to install mac os x in disk utility it does not show my hard disk, can you plese tell me what can i do.
View 1 Replies View RelatedI have two external hard disks, one formatted as FAT32 and another formatted as NTFS.Both cannot be seen in Finder when plug in. Only another one formatted MAC OS extended can.how to dispay my drive in the Finder (I don't want to reformat it as I have lot of contents and need to be read in my window computer.)Im running Mac OS 10.7.3 on my iMAC
Info:iMac, Mac OS X (10.7.3)
MacBookAir,1.8GhZ,Memory 4GB1600 MHz DDR3 osx10.9.3
Finder can show and open the files from the external hard disk but can not searching for the files.
i have this strange issue that occured just out of nowhere without me (knowingly) having contributed anything to it.yesterday i launched my iMac and my external firewire drive wasn't showing up in neither the finder nor on the desktop. i instantly thought about a hard drive crash, but soon tried other things to evaluate (or not) my guess.
for instance, i unplugged the drive waited a few minutes before i plugged it in again. since this iomega drive is also equipped with a regular usb port i also switched cables and tried connecting it via the iMac usb sockets as well as via an usb hub without any luck. the drive still won't show up. so i launched the Disk Utility, to see if the drive needs some checking/repairing, but to my surprise it wasn't showing in Disk Utility either.
thus far i only considered this to be an issue with only this particular external drive, but when i eventually switched on a 2nd external drive (this time an usb drive i use for Time Machine) that drive also refused to show up in either the Finder or the Disk Utility app.
curious as i was, i then fired up a 3rd and 4th external drive and now had all 4 drives running at the same time. none of which were showing up, just as if they weren't even connected with the iMac.
this strikes me as more than odd. i've heard about hard drive failures and crashes. they just occur over time. maybe and under some very strange coincidences it is possible that two external hard drives quit their jobs at the very same time, but seriously .... 4 of them?? i hardly think so.
well, maybe it's the iMac's usb/firewire controller that's causing the trouble, i thought. but then again, my other connected devices (iPhone, iPad, Printer, Scanner, eyeTV) are functioning and get detected just fine as far as i can tell.
i have no idea what's going on. i dismiss the idea of 4 external drives having crashed all at the same time just as much as i don't think that the iMac's usb/firewire controller has got any issues. re-formatting any of the 4 drives is out of the question and even if i'd consider such desperate measures, the Disk Utility wouldn't let me re-format anything anyhow, because the drives aren't listed there. i wish i could just use my Time Machine to resolve the issue but, as i mentioned earlier, i can't access the Time Machine because it also won't show up.
Info:
iMac, Mac OS X (10.7.4)
I have a 2TB Western Digital My Book Studio FW800 external that has 5 partitions, connected to my 2011 iMac. I had help doing the partitions and don't really remember the reasoning, but one is just for my SuperDuper! backup, one is Miscellaneous, one for movie clips off my camcorder, one for misc scanned photo's and one for my genealogy research. I back up using Time Machine to a Time Capsule and also to this WD hard drive with SuperDuper!
Recently I'm getting a pop up message that "Mac OS X can't repair the disk "Genealogy"'. And it needs to be reformatted. It's become a read only disk. When I look in Disk Utility it shows all the partitions as "Mac OS Extended (Journaled)" EXCEPT for the one in question. I also noticed that there are a lot of files with "date created" being the same date in 1969! These files may be letters I've written or photo's I added to that partition within the last few years.
I think I have to completely reformat the entire external hard drive to repair this, but I want to make sure. Because it's going to be a major hassle backing it all up to another external (having to get one first) and then figuring out how to make the files that have turned "read only" in that one partition, back to their original state! Does this sound right, that I have to reformat the entire external hard drive? And how do I get the read-only files back to their original state.
Info:
iMac, Mac OS X (10.7.3)
I have a early 2011 macbook pro and the internal hard drive failed. I installed OS X mavericks on an external hard drive (1) and I boot from the external drive (1). On a different external hard drive (2), I have a disk image of my macintosh HD (the computer's original hard drive with all my data on it) How do I go about restoring from the disk image on the external drive(2) to external hard drive (1)?
I want to be able to boot from the external hard drive (1) and have all my data that I backed up as a disk image on external hard drive (2)
Info:
MacBook Pro, OS X Mavericks (10.9.4), early 2011 macbook
I have purchased a Seagate 500gb 2.5 inch laptop hard drive to replace my feeble 120gb drive. I am trying to set up this drive using carbon copy cloner before changing it over, I'm using an external enclosure for this. The problem I'm having is the hard drive isn't recognized at all.
It's not showing up in finder or disk utility so I don't know how to format the drive.
I'm using Leopard 10.5.6
The instructions that cam with the enclosure mention setting the hard drive to function in master mode, what does this mean? I don't want to go to all the effort of changing the hard drive if there's some sort of problem, and I would rather clone my drive before removing it too.
I've recently converted to the Mac-side:
I'm having difficulty with my external hard-drive, here's the info on that one:
Disk Utility won't allow me to mount the drive, I've tried using a number of softwares to read it (working under the assumption that it's an NTFS drive), including Tuxera and Paragon. I have too much stored on the hard drive to empty it back onto my old computer, and so I'm not able order to re-format it.
Info:
MacBook Air, OS X Mavericks (10.9.4)
How to copy files to external hard disk and use it for both mac and windows. there is the fat32 formatting bt i dont wanna use formatting because i already have a lot of content on the exteral hard disk.
Info:
MacBook Air (13-inch Mid 2013), OS X Mavericks (10.9.1)
My G drive External Hard disk is not recognised by windows laptops yet it works on my MacBook Air
View 1 Replies View Relatedwouldn't even load. It would just show the little blue "light" flashing on and off, as if Finder were launching, crashing, launching, crashing.After some deduction, I found the problem to be my USB WD hard drive. It used to previously work fine. It has only one partition on it, which is HFS+ formatted. Disk utility verify/repair reports that the drive is fine.
View 8 Replies View Related1. I plug in my 2.5" external hard drive. It appears in Finder. I can see the contents of the main directory. 2. The moment I CLICK on any folder/file, I get the beach ball and Finder crashes. This is the only time Finder crashes.I've searched the forums but all the results are old and no solutions have been found.
View 2 Replies View RelatedI have 2 usb drives attached to my iMac which is running snow leopard. I am trying to share the hard drives so i can install some software on my Macbook but i cant see the drives in my finder on the macbook. I have checked all the settings on my imac and everything is shared properly but i still get nothing.
View 7 Replies View Relatedfinder application stopped finding certain types of files on an external drive. The external drive (WD 80GB) is recognised and I have access to all files, however, when I search for specific files in the finder window it wont find pdf, txt, doc files. It does find picture files such as jpg. I have tried using the drive on my laptop (snow leopard) and macmini (leopard)
View 2 Replies View RelatedI just bought a new 1 TB external hard drive for back up purposes. When i connect it via USB to my Snow Leopard macbook pro, it gives me a "this disk not readable by this computer message". I click ignore, and it lets me do whatever i want to the disk - read, write, etc. I have tried repair disk - tells me it's good to go, and tried reformatting several times - thought not zero disk data or the 7 pass bs.
View 1 Replies View RelatedI had downloaded some files to add to an external hard drive, the hard drive was assigned to a pc before adding these files so it wouldn't let me add files from my MacBook..
Had a look around online and made some changes (well thats what I thought) and I was able to transfer files form my MacBook onto the external hard drive.
What I then figured out was that there was nothing left on the hard drive except for the two file sI just transferred..
It turns out I deleted everyting without noticing.
The stpes I followed was to go to disk utility then select the hard drive and click erase (not knowing this would erase evrything).
So now I have two files on my hard drive and no idea how to recover the 'delted' files.
I tried using Disk Drill, which found the files but then it said I need to buy the full version to recover them.
I am wondering if there is any free methods to recover these files at all
Info:
MacBook Pro (13-inch Early 2011)
I recently bought an SSD vertex 64gb for only 200$ cad. Unfortunately, I do not have enough space to install the Soundtrack Pro components on this drive. I recently bought too an eSata powered cable and a express card esata who came with it. The hard drive can't be detect on my macbook pro unibody late 2008 2,4" but runs. I install the silicon image drivers non-SL and adding over that the SL drivers.
[URL] In that case, I want to know how to uninstall those drivers from silicon image 3132? I thought about another thing if it really not work eventually. The dvd-drive bay could be remplaced by an enclosure 2.5" for my factory 250gb 5400rpm.
[URL]
Second question, Does this other hard drive will take a lot more power?
