MacBook Pro :: WD Elements External Hard Drive Won't Detect On It
Jun 27, 2014
transfer my files from my WD external drive to my MBP but to no avail. I installed them both and after that, my WD Elements wont show anymore. It was working before prior to installing MacFuse & NTFS-3G. So I tried to remove them both but still the same problem. It wont detect my WD external drive anymore. The light on my WD drive is lighted up as usual but can't be found on Finder. I also tried to remove the WD external drive from my MBP and it recognises that my WD is there! Its says did not unmount correctly, something like that. I also tried to isolate the problem using another computer, this time, Windows and it works well.
The Culprit of all this is when I install MacFue & NTFS-3G
I have a problem with an external hard drive WD Elements, fails to recognize the password I entered. you have a tip on how to retrieve it? even if it leads to the formatting of HD ...
I installed NTFS for Mac to read/write external hard disks that I shared between my Macs and PCs. It's doing find until recently after I upgrade my MacBook to Mac OS Lion.
It can still can detect certain external Hard Disk, but still cannot detect some external Hard Disk and Flash Drive even though it is supposed to be dual formatted.
What is the hard disk like inside these? Could I take the hard drive out of the enclosure and put it inside my Mac Pro? I have a friend who's WD Elements drive won't show up when she plugs it in, but I haven't seen it or messed with it first hand yet, so I don't know exactly what's going on. She says the light shows up and then goes away, and nothing else happens. If I fail to make it work through conventional means, how do I connect the drive to my Mac Pro in a way that bypasses the drives own AC Power system, which could be the faulty component?
I recently just purchased a macbook pro and am trying to convert files from my external hardrive on to my mac. My external was used with my old computer which was a dell so it was run off of windows format. I cannot afford to lose all of this information i have on here. Is there anyway i can convert these files so my MAC will read them without having to delete my files on my external.
I connect my external to my MAC and it says it doesn't read it, i believe it is in ms-dos format.
I recently received a Western Digital 1TB external HD for christmas. It has 2 partitions 1 for time machine backups and another just for some extra space . They are both set to Mac Os Journaled and work fine but when i connected it to my brother Windows laptop to get some music of his hard drive, it wasnt able to find the hard drive. i tried unplugging it and plugging it back in and nothing happened.
I recently bought an SSD vertex 64gb for only 200$ cad. Unfortunately, I do not have enough space to install the Soundtrack Pro components on this drive. I recently bought too an eSata powered cable and a express card esata who came with it. The hard drive can't be detect on my macbook pro unibody late 2008 2,4" but runs. I install the silicon image drivers non-SL and adding over that the SL drivers.
[URL] In that case, I want to know how to uninstall those drivers from silicon image 3132? I thought about another thing if it really not work eventually. The dvd-drive bay could be remplaced by an enclosure 2.5" for my factory 250gb 5400rpm.
[URL]
Second question, Does this other hard drive will take a lot more power?
Just installed a new HDD into a macbook pro that was dropped. Seems fine, loads the disk and then says it can install the OS, i load up disk utility and theres no hard drive int he list just the optical drive and the DVD, its not the disk that came with the mac itself its either my proper retail one or the one that came with my personal older macbook which might be the issue. Ive taken apart and reconnected the HDD and all seems fine internally. Are there any issues that cause this except not using a full retail disk which im going to try later on, just wanted to rule everything else out.
I am, I hope, at the end of a 36+ hour formatting process with this WD Elements 3TB external drive. I decided to zero out the drive and when I went to bed last night at around 12am, there were about 6 hours left in the process. This morning at aroud 9am I went to check on the drive, expecting it to be ready to go, but I found it writing a temporary file. The progress bar is about 90% done. Is this part of the normal zeroing out process? If so, how long should this take? If this ISN'T part of the normal process, what should I do?
Info: Mac Mini 2 GHz intel Core 2 Duo, 4GB 1067 MHz DDR3, Mac OS X (10.6.4), 512 MB DDR SDRAM
I have a MacBook Pro running OSX 10.7.2 and it recently stopped booting. Got the gray screen with the folder that has the question mark on it. I have attempted to use Command + R to do a Internet Recovery of the system, but once I get to the Mac OS X Lion screen to select where i want to install OSX, there are no hard drives listed.
So I figure, the hard drive (Hitachi 500GB that came with the Mac) is damaged or not functioning correctly. This doesn't seem to be the case because I can hook it up to a notebook SATA hard drive enclosure, connect it to my other MBP and read all the contents of the drive! This was good news, as i was able to copy off all important data, etc.
Using Disc utility, the partitions check out, and the drive appears to be functioning OK.
Verify and Repair volume “Macintosh HD”
Checking file systemChecking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Checking multi-linked files.
Checking catalog hierarchy.
Checking extended attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Volume repair complete.Updating boot support partitions for the volume as required.
I have purchased a replacement hard drive and am waiting for it to arrive in the mail.
My question now is this:
Am I able to do some kind of time machine backup, make an image, or do some kind of target drive restore from this hard drive since it is accessible on my other computer?
I don't mind reloading the operating system on the original MBP, but would really like to avoid the process of setting up all the applications, settings, etc if this drive is in fact functional.
I have Snow Leopard (10.6.8) installed on a solid state drive (SSD). I'm wondering how I can check whether my internal hard drive is spinning or asleep. Is there a diagnostic to test whether a hard drive is spinning?
Info: iMac (27-inch Mid 2010), Mac OS X (10.6.8), 12 GB RAM
Recently I bought 2 identical WD Scorpio Blue 1TB hard drives for my macbook pro 13 inch 2010. My aim is to replace the internal hard drive with one of the two I just purchased and use it as my system drive with Lion, Windows and Data partitions. And for the other hard drive I want to use it as a full disk back up for the internal drive (now 1TB hard drive).After I was done with setting up both windows and mac and data transfer, when I booedt into the recovery partition from the internal drive to clone the drive to the external drive, the disk utility gave me this error (Could not validate source - error 254). I also tried using Carbon Copy Cloner but it only could clone partitions, not the entire drive. Yesterday I downloaded a copy of Clonezilla. It worked fine until it had to clone an exFAT partition (my data partition). The exFAT partition appeared as 'RAW' partition in clonezilla. As a result, the whole partition appeared to be full and clonezilla had to copy every single blocks of data in that partition and the estimated time remaining was about 30 hours. So clonezilla is out too. Just want to ask if there is any program/application (bootable or not) which allows can do a full disk clone to an external hard drive.
Basically I have a 750GB hard drive in my Macbook Pro and over 300GB is taken up with 'BackUp' data. This is more than the total of everything I have on the drive other than that. Time Machine has always been setup on an external drive and when searching all files on the Macbook there is nothing for backup files so don't know where it is coming from.
I have a 2011 MBP (thunderbolt) that I've had for about a year now. I use it daily at work, with an external LCD monitor connected with a mini-dvi -> DVI, no problem, except for the occasional need to restart when first connected.
However, at home I have an AOC Razor 24" monitor that until recently was connected to my home PC via HDMI, working just fine. However, my PC died and now I would very much like to be able to use this monitor at home until such a time when I get around to finding a desktop replacement. My MacBook Pro, however, has completely different ideas it seems... It completely refuses to recognise the monitor. I don't get the blue "flash" and it doesn't show up int eh display panel at all, not "sleeping" or otherwise, it simply looks as if it's not there.
Having trawled the forums, I've done the Jan/Feb firmware update, I've tried two different HDMI converters (One the Moshi from my local Apple retailer, the other a no-name brand converter, which works fine elsewhere), I've even tried a mini-dvi -> DVI -> HDMI converter (I know, I didn't expect it to work, but when you're at then end of your wits, you're at the end of your wits ). I've gone through three HDMI cables and tried an assortment of "black magic" solutions found on the net, with the adapter half-way plugged in, resetting the PROM, closing/opening the lid, running gfxCardStatus ( just in case it did something ) and checking the monitor elsewhere.
The only thing I haven't done (that I can think of) is swap the actual MBP,however, as mentioned, I use an external DVI monitor every day, so it doesn't seem likely that that's where the problem is... I'm guessing it's got to do with how the monitor handles HDMI or some such thing but I don't seem to be able to find much of a comment from anyone else on the net, so here I am... I considered sacrificing a goat at full moon, but I'm not entirely convinced that'll do much either and I upgraded to Lion as I saw a throwaway comment somewhere from someone, indicating that that might or might not have helped them with a slightly similar problem... So this problem now spans 10.6 AND 10.7...
So around 5 years ago i got the WD-160JB hard disk drive. I want to see all the things i did back then. I want to be able to connect this WD-160JB drive as a external hard drive to my mac.
What i am wondering is if you can somehow have a cable or something which links the USB from the MBP to the hard disk.
with cloning/copying the content one an external hard drive onto a new external hard drive. Basically, I have a 500GB FW400 drive which I use to store my media files. It's full, so I purchased a 1TB FW800 drive to replace it. Obviously, I thought I could simply copy and paste the media files from the old drive to the new one.I cannot copy the media files to my internal drive first as my internal drive is only 250GB and nearly full itself.I have used Disk Utility to attempt to close the old drive to the new drive, but keep getting "insufficient space" errors.
recently the harddisk of my macbook pro crashed and I had it replaced with a SSD thinking I could use the old harddisk as an external but now it seems like the crashed harddisk cannot be detected by my macbook. What should I do?
This is my first Mac. I cannot get it to detect my external display: It is an ASUS PA248Q, manufactured Aug 2012.
The HDMI cable according to my Amazon history is at least 1.3c from 2010, "Fanatic Digital Imperial Series Gold-Plated HDMI Cable (6 feet)". It works with perfectly connecting an AmazonTV box to an old Samsung TV, with vivid clarity, unlike our cableTV signal.
Just in case, I have a new HDMI cable on order, which claims to be of newest standards. The Macbook Pro Retina (late 2013) has the standard Intel Iris from the Haswell chips, as well as Nvidia GT 750M, the latter which I don't think has been used yet.
The ASUS display says: HDMI NO SIGNAL.
I have tried shutting them down and replugging the cable. I don't know what the ideal order is. The Macbook Pro is plugged into AC power, as suggested.
In System Preferences>Display, I press the Option key to select "Detect Displays" option (seriously unintuitive).
I have also tried resetting the NVRAM:
I shut the machine down. Pressed the power button, then quickly held the quadruplet: Option-Command-P-R (a double handful) and waited for the machine to chime a 2nd time. Tried to detect external display no luck.
Next, I reset the SMC:
I shut the machine down. Then I pressed Shift-Control-Option-Power for about 5 to 10s. Then I turned on the machine normally. NVRAM & SMC steps were from an old youtube video, as the instructions I had did not explain how to do so clearly.
I own a MBP 13 that I wish to connect with my Acer external mobitor. I bought a miniDisplayport to HDMI [male] cable for this purpose. Now the problem I am facing is that even though my 40" Samsung TV detects the MBP and works as an extended monitor, the MBP fails to detect the Acer monitor. However, I currently use the Acer monitor with my Mac Mini, Tata Sky+ set top box and also my Playstation 3
I've had a lot of problems with my iMac G5 power supply and since I have newer computers I've decided to get rid of this computer.
I want to save the hard drive and put it in a case, then use it as an external drive on my other Macs.
What sort of case do I need to shop for? Should I look for SATA or what exactly is the proper nomenclature.
Is USB 2 the preferred choice, or Firewire, or what? Is there a USB 3? I use a mid-2010 27 inch iMac with the intel processor, and I needed to buy an adapter to use my older Firewire external drive. Is Firewire a dodo?
i have a power mac g-5 quad with an external dvd drive and a external hard drive and 2gb of ram. on my ext. hard drive i downloaded mac the ripper and that is where i put all my dvds, now today on my pmac i was using mac the ripper, popcorn, itunes, safari all at once and it froze up on me?why? could the ram be an issue? how may programs can i use at once with my pmac?
i just got the new WD5000BEVT 3.0 Gb/s in order to replace my old HD but found out that my previous one has 1.5 Gb/s interface. i'm wondering if the new HD can be replace. if it can't fit, i plan to use it as an external hard drive but have no idea what kind of drive enclosure i should looking for.
have both Macbook and a Dell laptop, both of which I download things on. Is it possible to have an external hard drive that I can hook both notebooks up to and put data on? (Doesn't have to be at the same time) If so, what are my best options? I just want to be able to hook either of my notebooks up to one single external hard drive, but still have it accessible by both computers when I want. Thoughts? (Sorry if it doesn't make much sense, kind of hard for me to explain)
I have a Western Digital 250gb Scorpio drive in my Rocstor external hard drive, currently used by Time Machine. Is it possible to remove the drive from the case, and put it in my 'Book? Could I go out and buy a 1tb hard drive, and put it in the case? What would be my best way of coping data if the Time Machine backup is on the now internal hard drive? I have other a bunch of movies and T.V. shows on the drive, as well.
I have a 1-TB LaCie hard drive attached to my Macbook (119 GB hard drive; see more specs below).
I'd like to add another hard drive to back up the one I have (which is also backed-up by my Time Capsule). I do a lot of work with large video files.My previous LaCie's have conked out. What do you think is the best make and model for a 1 TB drive?
my start up disk on my macbook pro is almost full and I'm considering getting an external hard drive to backup my computer and/or separate my files, such as having school work and other applications on one hard drive and my many photos, videos, and films on another one. Is this wise? If not, what should I do?
