Let's start a thread of damaged but working MBPs! I'm sure this has been done before, but let's start a new one. Cracked, dented, damaged screens... Let's see some pics. Who has the worst damaged but working MBP?
View 23 RepliesI was browsing the internet for a couple of hours when I noticed the computer started getting super hot. The fans are going full blast, and the keyboard is also hot. The scary thing is, I'm not running anything but safari. I'm afraid that given where the fall happened (the back of the computer) that I have damaged one of the fans, because one side of the computer (the left) is burning hot and the right is just normal. What should I do? I dunno how much a new fan costs but I'm guessing not cheap.
View 4 Replies View RelatedIs there there anything wrong in using the battery that was drop and have a dent on it. I drop my macbook battery when I open it up to upgrade my hdd and it left huge dent on it. I'm not worry about how the dent looks on my battery because it a battery is cover by the lid, but I am more concern about the battery performance or the life of it. Like... would a dent battery burn up my mac and stuff? Since I dropped it 4 days ago, I've been using my macbook just fine, it not too hot, battery is about 2.5 to 3.5 hours with factory default power setting setting. Since nothing is wrong now it wont be likely to occur in the future right?
View 1 Replies View RelatedI have a unibody Macbook Pro 15" and the drop caused the upper casing to be pushed up from the bottom part and now the lan cable port which is affected the most is tilted and dented in such a way the opening is not possible to fit the cable in anymore.
View 7 Replies View Relatedjust wanted to see how these machines handle abuse. I don't plan on abusing mine, but I am thinking about giving my brother one, and he is careful, but sometimes slips. I know the aluminum bodies aren't that strong, I've bumped my 12" into my car door, and it got a dent. Now I'm very very careful with it. Anybody else got stories or pics?
View 7 Replies View RelatedExternal IDE drive,- removed from a dead PC. chock full of files. Mounted via USB perfectly on the 'Vista PC and I am pretty certain the drive mounted on new MacBook Pro running 10.6.2 (using Wiebe's external docking device) Many documents were present and viewable on the Mac
Drive then placed in plastic bag on counter in dining room. Two weeks later I purchased a USB enclosure for the drive. Installed easily. Powered up immediately, I can hear the drive spinning.
Connected to the same macbook pro to which the drive had, two weeks earlier been connected, and mounted. Except now the drive does not mount
Power is on. I can hear the drive spin But now the drive does not mount. Disk Utility sees the drive but it does not mount. Mac asks me if I want to reformat the drive as it is unrecognizable. Drive Genius and Disk Recovery see the drive but can find no files.
What might have happened? Did damage occur by putting in an enclosure? I have put numerous hard drives in enclosures and never had this problem.I know I pushed in the cables tightly and assume that the drive would not power nor the drive be seen if IDE ribbon cable and power line were not properly fastened. I am puzzled. Anything I can do? would like to save these folks' files.
there are claims that a uMB with screen 9CA5 is as good as the MBA, Anyone have both to do a side by side.
The screen was the one reason I went with the MBA.
I'm planning on running bootcamp win 7 on my MBP. Would it possible for me to use a cracked version win 7 successfully? or does it have to be authentic? Just trying to clear up this issue before I start anything.
View 1 Replies View RelatedThe plastic part connecting the screen and the keyboard in my MBP has a crack! i don't know were it comes from, i have never droped it or mishandled my computer in any way. Will a repair be covered by the warranty?
View 9 Replies View RelatedI took my MacBook Pro on holiday with me to do some work whilst away, and I have acquired an unwanted crack down the side of my screen.
It doesn't cause any problems with my viewing as the majority of it is offscreen on the black boarder, however whenever I catch a glimpse of it in my periphery it breaks my heart a little bit- no-one wants a huge crack on the thing they love the most.
Shall I get it repaired? If so, how much, where would be best/cheapest?
i tried to make a post that was long and detailed but it did not take for some reason so i will try to make this one short and to the point.
bought a new MBP 2.5 (about 4 months ago) right before the 2.66 with the price drop was released.
had various issues and had to swap it out 3 times which my new local store had no problem doing. so i finally got a machine with no defects and working perfectly. was very happy.
the other day i had it sitting on the coffee table on with the screen open, i picked it up to move it a few inches and heard a loud CRACK. now my screen goes back further than it should and it slightly tilted to the left. the gap between screen and body is slightly larger on the right side than the left.
i had planned on purchasing apple care towards years end as i have done with the last 6 machines i have owned in the past. i am going to take it into the genius bar for replacement or repair but am afraid they are going to say i broke it somehow... i treat this thing like a baby and there is no reason the hinges should have cracked from just picking it up and moving it while open. it is still working, but i can not deal with the thought that the hinges are now weakened and are definitely going to break eventually (sooner than later now that this has happened) not to mention the gaps between screen and body and being a bit crooked. also, if i open it past 90 degrees, it falls all the way back to the point where it finally catches, which is a lot further than it used to retract. the hinges are definitely more loose and not as tight as they should be. i have never had more issues with a model in my life until i bought this unibody.
so what are your thoughts? what i am really worried about is them saying i broke it somehow and not honoring the repair or replacement (which is not the case) or when i do purchase applecare towards the end of the year that this will be noted and if not fixed properly or replaced then they will not honor the repair if it actually completely breaks. as i think it will eventually if i do not have something done about it ASAP. (if it is noted on the account when i bring it in today or tomorrow) i have never picked up one of my macs with screen opened to have the hinges snap (being only a few months old)
One of my employes dropped something on my new MacBook pro it dented the outside and cracked the screen. I was checking to see if anyone new the cost of repair. Also would it help any to by AppleCare I know it doesn't cover accidental but i am just checking on what I need to do.
View 3 Replies View RelatedA few days ago I posted about a bit scratch that appeared out of nowhere on my brand new iPad, now this: Spilt tiny quantity, maybe 3 ml, of coke onto the case of my mbp and little of it drained into the bottom edge of the trackpad. It became unresponsive and made only a dull click for the next 15 mins. Whilst tapping harder to see if I could get a click out of it (it ofc happened whilst doing something important) the glass of the track pad cracked beneath my finger. Wasn't even tapping that hard.
View 3 Replies View RelatedSo my macbook's wrist pad (right side) has been cracked for awhile now. Started out with a small crack, then growing almost 4cm and then snapping off part of the plastic. I tried superglueing it back on (im resourceful ) but it didn't hold. Now I have a 4cm long piece of plastic missing from my wrist pad, and crusty superglue residue left where my wrist goes.
The left side is starting to crack as well, although, not as bad.
Figured I would ask here before I take it to the apple store:
What will all need to be replaced? Will just the wrist pad be replaced or is it attached to the keyboard
My macbook pro screen just cracked in two different spots basically where my fingers were touching it as I was rying to close it, The screen and the base were very hot, will this be covered by Apple ?
Info:
MacBook Pro, Mac OS X (10.7.3)
I have a 2,1 White MacBook from 2007. Early last year, 2009, my casing cracked on the palmrest. I know this is an extremely common problem and the repairs are fully covered by Apple, regardless of warranty. My case also has a few of the hairline cracks near the exhaust vent and hinge.
I have yet to have these problems repaired. At first I just didn't feel like going to an Apple store. Now that the MacBook casing has changed to the unibody design, I wonder if the future repair will be affected for better or worse.
I have AppleCare for four years, until 2011.
Does anyone know how Apple is fixing these casing problems in 2010 now that the unibody MacBooks are out? I expect it is very likely that Apple has plenty of the old hardware on hand, but I would like to think I could get a very nice uMB upgrade for free, even if I need to wait longer to get it.
I am going to buy my first mac when they release the arrandale MBPs. I will get the 13", I was wondering about applecare, lets say I cracked my screen on the corner and I can see everything else fine, but not the corner, how would they fix it? Send me a new one, or change the screen? I guess, what I am trying to ask is, if I break it, but it is still usable; will they replace it or fix the broken part?
View 8 Replies View Relatedi've had my top case replaced three times already and it's broke again. it only takes a day or two to get it replaced at my local authorised repair centre, but is it worth ringing apple and trying to get the machine replaced? i mean, there's no point in replacing the machine with the same model because it'll just happen again, but i can't imagine apple giving out one of the new machines though.
for reference its a 2.2GHz white macbook bought in november 2007 and the top case was replaced the first time around jan/feb 2008, and then twice in 2010. obviously the applecare runs out in november of this year so want to get this sorted out asap.
My macbook won't turn on anymore it just gets stuck on the apple logo with the spinny thingie, and I've tried everything to get it to work (safeboot, etc etc). The fans are EXTREMELY LOUD too. I also have a crack on my hinge. I'm thinking of getting the hinge replaced by a secondary person, other than apple. But in the apple care warranty it says:b. Limitations. The Plan does not cover:
(i) Installation, removal or disposal of the Covered Equipment, or installation, removal, repair, or maintenance of non-Covered Equipment (including accessories, attachments, or other devices such as external modems) or electrical service external to the Covered Equipment; (ii) Damage to the Covered Equipment caused by accident, abuse, neglect, misuse (including faulty
I need to get files off of my damaged Macbook and I'm not sure how to do it. Is there a way to transfer files from my macbook to another computer? The damage is to the screen of my macbook and it is severe- you can only see the top left of screen, the rest is cracked/blacked out. Is there anything I can do?
View 8 Replies View RelatedI run Microsoft OneNote side by side with some mac Apps and often find my self switching between the apps using Leopard spaces on my MBA which is annoying. I want to be able set an external LCD and assign that solely to OneNote, and simultaneously be able to access my OSX apps on my MBA's LCD. So each OS platform has its own window.
View 3 Replies View RelatedI have a macbook with osx lion, fully updated, and I work with two screens on my workplace. The problem is that when I turn any aplication to full screen, I can`t use the other screen, because the full screen mode uses the desktop of both screens.
Info:
MacBook Pro, Mac OS X (10.7.3)
i have a macbook pro 17 that i found the bottom cover is missing. all i know is that the cd/dvd drive was manufactured in 2010. wanting to know if parts are interchangeable between years?Message was edited by: 3noa maybe i should have made myself more clear i found it after it had been thrown out.
Info:
MacBookPro
I have a Macbook Pro 2.16 Core Duo, and I'm wanting to install 10.6, but about a year ago, I cracked my screen to the point that I cannot make anything out on it, and haven't replaced it. Instead, I have just been using it in clamshell mode, which has worked out fine so far. My problem is that I cannot get the 10.6 install to show up on my external monitor.
I searched around, and could only find one other similar thread that just ended with the author putting it in clamshell and having it work fine. When I boot to the install and close the screen, I just get a grey box on my external display with a black bar on either side of it. I can't seem to find any other resources, so I'm not entirely sure what to do at this point.
What is the Difference between an lcd screen for a Macbook pro 15 A1150 and an A1226? I need to know if I have to buy a A1150 LCD replacement or will any macbook pro 15.4 screen work as long as it is a TFT LCD 1440 by 900. I know the LED screens won't work. The A1226 screens seem more common and easier to find. My model of Macbook is a A1150/MA464LL/A 2.0GHZ.
View 1 Replies View Related
i've been reading about these screen threads, that some of the new macbooks have faulty screens or display, it got me worried because i purchased a new 13" macbook pro ..how would i know if mine is faulty or not ?
had to get a dvi to make my older screen work. now when I close the powerbook. and start up it defaults to my power book. will not turn on my screen. Called Apple and did the display screen mode and it can not find it? but will work about every other week?
View 6 Replies View RelatedI am using a scoreboard program. How do I get two monitor screens to show, one for scoreboard and one to run the back end of the program?
View 1 Replies View RelatedIs it possible to project 2 different screens (not mirrors) and have the presenter display with both on the LCD with Keynote? I am using a MacBook Pro Intel Core 2 Duo (NVIDIA GeForce 9400M and 9600M GT) and Keynote '09.
Info:
MacBook Pro (15-inch Late 2008), Mac OS X (10.7.3), Keynote 09
So what I thought would be a quick fix on my PB 12" Aluminum (867Mhz) has given me days of frustration. After I cracked the LCD on my PB G4 12" Alluminum (Model A1010), I tried find my way around shelling out $350 for a new lcd. The original LCD was a Samsung LTN121XJ-L01. After surfing Ebay for a while, I mangaged to find a completely new Samsung LTN121XJ-L02, which is essentially the same LCD with a different suffix (L02 instead of L01). I assumed that this would not matter at all since the LCDs are identical, but after swapping out the old cracked LCD for the new one I was completely bummed to see that new LCD dead at birth. I get no response from the LCD, unless I hook up the backlight wires of the new LCD to the old inveter and then connect the LCD flexcable to the old, broken LCD. When I do this, the backlight functions and the new LCD turns grey with no image. I've already reset the PMU, PRAM and NVRAM. I don't know what else I can do. Is this LCD completely incompatible with the old one? I don't see why it wouldn't be.
View 11 Replies View Related