I have a unibody Macbook Pro 15" and the drop caused the upper casing to be pushed up from the bottom part and now the lan cable port which is affected the most is tilted and dented in such a way the opening is not possible to fit the cable in anymore.
View 7 Replies
I'm using an airport extreme (latest firmware) with 10.6.3 on a mac pro and a macbook pro. The mac pro is wired the macbook pro is connected via wireless.
I constantly have signal drops. While the airport extreme seems to stay online (green light is sold) the cable modem always resets itself.
I can't figure out if this is because of my Optonline service or due to my router (airport extreme). Cablevision states nothing is wrong with my cable internet connection and the issue may be with the router. I've tried three different modems from them and they've supposedly checked everything (wires, signal, etc). I still think it has something to do with them. I'm hesitant to try DSL as it is slower (no fios here yet).
I don't get how it can be the router if both my desktop and laptop lose connection to the internet at the same time if they happen to be connected online at the same time.
Is there anything I'm overlooking in regards to the airport extreme? Should I trash a particular preference or try a different setting?
I'm kind of desperate at this point since it is highly annoying to constantly get knocked offline more than 5 times a day.
I just got the mini display to hdmi cable for my macbook pro. So far it works with the tv. It displays everything but there is one probably safari doest work.
Airport shows that I am connected but safari doesnt connect.
Is there there anything wrong in using the battery that was drop and have a dent on it. I drop my macbook battery when I open it up to upgrade my hdd and it left huge dent on it. I'm not worry about how the dent looks on my battery because it a battery is cover by the lid, but I am more concern about the battery performance or the life of it. Like... would a dent battery burn up my mac and stuff? Since I dropped it 4 days ago, I've been using my macbook just fine, it not too hot, battery is about 2.5 to 3.5 hours with factory default power setting setting. Since nothing is wrong now it wont be likely to occur in the future right?
View 1 Replies View RelatedLet's start a thread of damaged but working MBPs! I'm sure this has been done before, but let's start a new one. Cracked, dented, damaged screens... Let's see some pics. Who has the worst damaged but working MBP?
View 23 Replies View RelatedCould somebody point me to the type of cable I would need to connect a Mac Mini to a standard DVI port? The Mini comes with the necessary adapter, correct?
View 7 Replies View RelatedWould a standard 3.5mm audio input cable work? Would it fit in the port on my MacBook Pro? These are the cables I am looking at: [URL]. Port Image. I am looking at recording music from my Record Player to my computer with this Tutorial: [URL].
View 2 Replies View Relatedi want to buy a cable on ebay that will connect out of my port on my powerbook g4, i think its a dvi outpout. and i want to plug it into a hdmi input on my projector.
there are different kinds, supposedly, of dvi cables.
DVI -D
DVI -M
[URL]
can anyone tell me what kind of cable i need to get to do this?
I have a new imac with 2 thunderbolt ports - and I want to run a mini displayport cable over a thunderbolt port
Info:
iMac, Mac OS X (10.7.4)
i would like to find a cable to go from my canon 60d camera to the firewire port. i have been to numerous places and they do not have it. i could not find it at canon as well.
Info:
imac, Mac OS X (10.5.8)
I was wondering if there is an adapter or cable of some sort where you can plug in the minidisplay port from the ACD to dvi from the video card of a pc?
View 15 Replies View RelatedI am trying to get my girlfriend's parents a cable that will hook their 2005 Mac Mini to their HDTV. I don't know the specs on the mini, so I'm wondering what cable I will need. I know it needs to be something -> HDMI. Is the video out port on the mini a DVI?
View 3 Replies View RelatedI'm looking for a 1 TB external hard drive to connect to a firewire 400 port to use to backup my iMac. So far, the better drives, 7200 rpm, seem only to have usb 3 connectivity or are expensive. Is there an adapter or cable to connect a usb 3 input device to a firewire 400 port?
View 3 Replies View RelatedI just bought Samsung UN46C7000WFXZA. I want to connect my macbook pro to the TV and i got all the cables that i need.
1- HDMI cable
2- Mini DisplayPort to HDMI Female Adapter.
3- this sit that include Audio Cable
[URL] I did connect everything my macbook pro very well to the TV using HDMI cable from the laptop to HDMI/DVI port in the TV. Also I connected the Audio cable from my Headphone port in my laptop to PC/DVI Audio IN in the TV. Yes I got the pic and everything is good but no sound at all. I tried everything and i searched the net but no luck or answer at all.
if i buy the mini display port to dvi adapter, could i use it with a dvi to hdmi cable for my monitor. This is because the dvi and vga ports are already taken up.
View 3 Replies View RelatedI gave my HDTV away to a friend in need so for now, I'd like to use my new iMac as a pseudo-TV. The mini DisplayPort on the 27 inchers allows for both audio and video to flow both IN and out of the iMac, so what do I need in order to get this working? What kind of software will I need to use?
I'm connecting the cable box through its HDMI port and on the other end I have attached the (quite pricey) HDMI-to-miniDP adapter. Do I still need some kind of tuner? My cable box is brand new and also has FireWire, USB, and Ethernet ports.
a way to extend the mini display port cable on the 24" monitor? I'm using it with a 2009 mac mini and want to put the mini in a cabinet which is too far for the standard connection. The USB easy, but I can't seem to find a solution for the display port.
View 14 Replies View RelatedI bought a Mini DisplayPort to DVI adaptor with the intent of connecting my TV (with DVI-in) to my MacBook in order to use front row (and plex) for films.
However when I got home, I found that the DVI female of the adaptor does not match up (or successfully connect) to the DVI male of the cable. Have I done something foolish, but it seems that there are pins on the male that do not have a corresponding socket?
I have attached an image to try and help out...
Should I just give up and seek out a VGA instead?
Just wondering if a USB3 cable CF card reader will work on on my USB2 port on my old Intel 24" white iMac?
Info:
24" iMAC
I'm asking myself if it's possible to connect two 27" iMacs with the "Mini-Display-Port to Mini-Display-Port" Cable. I wonna use oneof the iMacs as the primary computer and on the second one just the display to extend my screen.
Information:
MacBook Pro 17"
Mac OS X (10.6.1)
I have a new Macbook Air 13", 4GB RAM, 2.13Ghz, 256GB SSD.
I'm connecting the Macbook with the Apple Mini Displayport to DVI connector to a DVI cable to a Dell 2407 monitor with a resolution of 1920x1200. The resulting image is blurry. The fonts are blurry and drop shadows on the screen flicker quite badly. The resolution on my Macbook is indeed set to 1920x1200 to match my Dell 2407.
Does anyone know what the problem could be? Is the problem with the Mini Displayport to DVI adapter?
I know for a fact that the Dell LCD and the DVI cable work fine with my Windows 7 box. I have tried two different DVI cables as well.
I want to buy the 27" iMac - but only if I can use it as external monitor for my Lenovo laptop when working from home. A the Apple store in London they said that this is possible with a Belkin converter from hdmi to mini display port (with a USB power caple to turn it into an active signal). The laptop also has a displayport.
Info:
iMac
I was just wondering if any other macrumorsmembers have been in the situation where there's no wifi, no decent 3G, but ethernet ports available to use, but you don't have a computer handy? Would it be possible that you could create an ethernet cable one end, dock the other, and literally connect e.g. an iPhone into the ethernet? At my place of work, there's no signal (dodgy GPRS/flakey Edge), some wifi, but in halls of residence, you get 1 ethernet port, and you can't put a wireless router onto it. It would seem that it would be an interesting solution, if it was possible.
View 4 Replies View Relateda Cable that DEF transfers audio over to the tv? Also here is my macbook pro model. Does it do Audio? Build 10FS69. Someone said there is a belkin one, is that right? Also, I just bought one from Monoprice and that f'in cable doesn't work
View 17 Replies View RelatedJust wondering if anyone knows is the original iBook G3 Clamshell A/V cable is interchangable with the iPod A/V cables?As in, can I use an iPod AV cable for my clamshell to output to my television?
View 5 Replies View RelatedLooking for best conversion cable to hook my Mac Book Pro up to our new HDTV - thought someone said I should get a converter that converts Mac 800 firewire output to an HDMI cable hookup.
View 6 Replies View RelatedI receive cable TV at home and I am told that instead of using a TV I can hook my MacBook via a HDMI cable and watch TV that way on my laptop screen. I'd like to do that. Is the information correct? How do I go about it? Can my MacBook do that?
View 1 Replies View RelatedHow many of you would like to see a HDMI Port? Why the miniDisplay port? Why not remove ethernet jack and miniDisplay port and replace it with a HDMI port. That way one HDMI cable feeds digital video AND audio. Am I the only one thinking of this?
View 22 Replies View RelatedI was wondering how I could file share, or make the whole Hard Drive (HDD) accessible to another computer. The two other computers I have are a Toshiba Laptop with Ethernet and USB, and a iMac Intel with Firewire, USB, and Ethernet. Putting these to use along with:Three Ethernet Cables Now how do I get the whole HDD visible to the others computers (either/both) and be able to write to it? Also, I do not want to use CDs and have no CDs that came with the computers. I want to put Xubuntu on the eMac and Debian on the iMacs and erase the rest of the Hard Drives. The computers getting this are the iMac G3s and the eMac G4 in my Signature.
View 1 Replies View RelatedI have a G4 in my living room and my old PowerMac 7300 in my bedroom. If I want of use either one to go online I have to disconnect one to connect the other. I cannot connect both at he same time. I use broadband cable from Cable Vision in New York. I was told about a router. Can anyone give me advice on the name of good router and whether on not it will slow down the access speed on the internet?
View 2 Replies View Related
