PowerPC :: Post Damaged But Working Powerbook

Feb 19, 2009

just wanted to see how these machines handle abuse. I don't plan on abusing mine, but I am thinking about giving my brother one, and he is careful, but sometimes slips. I know the aluminum bodies aren't that strong, I've bumped my 12" into my car door, and it got a dent. Now I'm very very careful with it. Anybody else got stories or pics?

View 7 Replies


ADVERTISEMENT

PowerPC :: What Part Of My Powerbook Is Damaged?

Nov 9, 2007

My powerbook G4 aluminum was dropped about 18 inches. The display is now hosed. Thus far I have found *nothing* wrong with the laptop except for the internal display only shows gray horizontal lines with black snow/static intermixed (still in horizontal lines).

What I'm thinking is that the display is probably actually fine and there is some little logic board in the display casing that is bad.

Here is what I've proven:

1. external monitor still works fine (means vid card is fine?)

2. swapped internal displays with another powerbook and was fully functional (means it's something in my display casing or my display itself)

3. backlight works fine (on my munged display)

4. i can see movement in the grayness when i move the mouse pointer around almost like the pointer was as wide as the screen and 90% translucent (i.e. there is a horizontal shaded bar i can move up and down with the trackpad)

I've already thought about upgrading to the 1440x960 display and being done with it. But then I started thinking it is probably a $40-50 part if I could just narrow it down.... And that would be the smart thing, rather than spending $300+

View 2 Replies View Related

PowerPC :: Cleaning Water Damaged PowerBook Keyboard?

Apr 25, 2009

When I bought this PowerBook, someone spilled soda into the PowerBook's keyboard, and everything on this computer works fine, except for the letters S, W, and Z.

If you pull the keys off, You can see the soda marks, I know with desktop keyboards, you can clean this and it would be fine, however, this has the keys that light up, so I do not know. What should I do besides pay $250 for a new keyboard from Apple?

View 2 Replies View Related

PowerPC :: Keyboard Messed Up While Working On Powerbook

Sep 29, 2006

Everytime when I'm on my Powerbook after 1 hour, sometimes my keyboard messes up.

All the letters turns to letter and symbols.

I reboot the laptop and its fine, this only happens every now and again.

View 2 Replies View Related

PowerPC :: Sound In Powerbook Just Stopped Working

Jul 17, 2007

tried vol up and down in preferences..nothing the only output is headphones it says

View 1 Replies View Related

PowerPC :: Powerbook Superdrive Not Working / Spitting Out Any Disc That Put In

Mar 25, 2009

So about 6 months ago, my powerbook g4 1.67's drive just starting spitting out any disc you put in. It would take them, whir around for a bit, then eject. It seemed like it had just died pretty much. Today, on a whim, I decided to try a disc in the drive, and it works! Apple repair had given it up for dead, so why do you think it came back?

View 1 Replies View Related

PowerPC :: USB Keyboard And Mouse No Longer Working On Powerbook?

Mar 31, 2009

The apple keyboard and mouse have stopped working altogether on my powerbook. They were working just minutes ago. Restart did nothing. Ideas?

Both USB slots are working.

View 4 Replies View Related

PowerPC :: Powerbook G4 17" Bluetooth Modem Is Not Working?

Jun 13, 2009

I have been using my phone as a bluetooth modem on my PB for quite some time now, but today I get an error saying it is unavailable. But it is a different message than when my bluetooth on phone is off. I have a HTC Touch Pro, Alltel (CDMA). The reason I use bluetooth is because I don't know how to use USB tethering (which would be nice as bt makes my phone quite hot). Anyways, If anyone can help with either problem, it will be GREATLY appreciated. I am currently posting this on my phone, as I have a 10hr car ride and no comp.

View 1 Replies View Related

PowerPC :: Doing IMac G5 Post Repair?

Oct 3, 2007

So I have a 1st Gen G5 1.8 Ghz imac. I had a bad power supply and got it fixed under Apple's warranty extension. Since I had it fixed it runs way warmer than it used to. The fans are also always on. Any idea on why this is and what can be done to fix it?

View 1 Replies View Related

MacBook Pro :: Post-spill, Certain Keys Not Working And/or Typing Non-stop?

Mar 17, 2012

I spilled a bit of milk on my computer this morning and managed to move fast enough to drain most of it. I turned the computer off, and on again, just to make sure that it was running. (I know now I shouldn't have...) I was able to log in, etc. My trackpad was going a bit wonkers, but it's done that before, so I wasn't worried. Turned it off, flipped it over, set it aside. 

A number of hours later, I turned it on again, and now the keys from A-L (ASDFGHJKL) and T-O (TYUIO) aren't working. I require a password, so now I can't log in. I noticed also that some key types non-stop (in the password box) until I press delete, which stops the typing. I've taken off a number of keys and cleaned them, but even if I press the squishy thing underneath, the keys aforementioned don't type. 

Can someone tell me what I can do, if anything, manually before I get an external keyboard? (I won't be going into Apple -- not interested in spending a few hundred+ for cleaning/fixing; my warranty's run itself out.) 

And, as a side question: I'm not sure if my Bluetooth is on. What do I have to do to be able to connect a wireless keyboard? Or do I need to get one with a USB? Or, because I'm logged out, am I completely screwed?

Info:
MacBook
Pro

View 3 Replies View Related

PowerPC :: Post Clone Fails To Become Bootable

Dec 6, 2010

I own a PowerMac G4, 1.25GHz. It came with no OS (donated by my local college to my high school and eventually given to me for my services in fixing this and the other 6 PowerMacs, and the 7 iMac G5s), so my IT teacher and I copied OS X 10.4.11 from one like it. That is currently my primary OS. We read online while thinking about upgrading his and mine Apple PCs to 10.5 Leopard, about the system requirements. They all line up [URL]:

- A Mac computer with an Intel, PowerPC G5, or Power PC G4 (867 MHz or faster) processor
- 512 MB memory or more
- A DVD drive for installation
- 9 GB of available disk space or more

With a 1.25GHz PPC, 2Gb of RAM, and an 80Gb Seagate IDE HDD, I'm all set up, right? On Friday, before the end of the day, I copied OS X 10.5.7 Leopard from an iMac G5 w/ G5 iSight (late 2006 model). We plugged it into his iMac G5, runs like a charm. Plug it into the "test" G4 (exactly like mine, but only one Seagate 80Gb IDE HDD), and it took a while, but it booted. So today, I copied it to my blank Seagate 80Gb, assuming that it would boot like the LaCie External HDD did (yes, that worked too).

It finishes copying, I reboot, hold option, punch in the lock code, and Low AND Behold... No Seagate. Mac OS X 10.4.11. But no Mac OS X 10.5.7. Okay. So I boot back to Tiger and recopy. Try to open a couple programs, they work (Office 2008 Word, Dreamweaver CS3, and iTunes 9.2). No problem. Open System Preferences, choose Leopard as the initial boot device, reboot. Mac starts up, and I get the screen with the little folder that alternates between the question mark and the Finder icon.

View 2 Replies View Related

PowerPC :: Powerbook Working Very Slow / Loading Websites Is Slow And Cant Watch Movie

Dec 11, 2010

Hey guys, i got an old Powerbook that the whole family use to surf the net. I notice its been super slow lately. Ive never had a problem with this notebook, I've only done 2 reinstall in the time ive owned it. I recentluy did another one, and notice its still slow, loading websites is slow, cant watch movies on it. This is a notebook i use to do photoshop and illustrator work on.

Do you think its just its time? I think it could be the hard drive or memory, is there any type of diagnostic i can do to find out what the problem is?

View 7 Replies View Related

MacBook Pro :: Getting Hot While Working - Fan Damaged?

Mar 17, 2010

I was browsing the internet for a couple of hours when I noticed the computer started getting super hot. The fans are going full blast, and the keyboard is also hot. The scary thing is, I'm not running anything but safari. I'm afraid that given where the fall happened (the back of the computer) that I have damaged one of the fans, because one side of the computer (the left) is burning hot and the right is just normal. What should I do? I dunno how much a new fan costs but I'm guessing not cheap.

View 4 Replies View Related

PowerPC :: Powerbook Battery - Significance Of Levels For Powerbook G4 15''

Nov 15, 2006

I am leaving for a week long trip and many parts of it will not be able to run the computer off of the powercord, which is a problem because I get about 40mins of wordprocessing use out of it when I run the battery alone. Can someone explain what the significance of these levels are for my Powerbook G4 15'' (Alm) 1.25GHz, namely the cycle count and full charge/remaining capacity?

View 8 Replies View Related

Hardware :: External HD Not Working / Damaged By Putting In Enclosure

May 5, 2010

External IDE drive,- removed from a dead PC. chock full of files. Mounted via USB perfectly on the 'Vista PC and I am pretty certain the drive mounted on new MacBook Pro running 10.6.2 (using Wiebe's external docking device) Many documents were present and viewable on the Mac

Drive then placed in plastic bag on counter in dining room. Two weeks later I purchased a USB enclosure for the drive. Installed easily. Powered up immediately, I can hear the drive spinning.

Connected to the same macbook pro to which the drive had, two weeks earlier been connected, and mounted. Except now the drive does not mount

Power is on. I can hear the drive spin But now the drive does not mount. Disk Utility sees the drive but it does not mount. Mac asks me if I want to reformat the drive as it is unrecognizable. Drive Genius and Disk Recovery see the drive but can find no files.

What might have happened? Did damage occur by putting in an enclosure? I have put numerous hard drives in enclosures and never had this problem.I know I pushed in the cables tightly and assume that the drive would not power nor the drive be seen if IDE ribbon cable and power line were not properly fastened. I am puzzled. Anything I can do? would like to save these folks' files.

View 3 Replies View Related

MacBook Pro :: Cracked - Dented - Damaged Screens But Working

Jan 12, 2010

Let's start a thread of damaged but working MBPs! I'm sure this has been done before, but let's start a new one. Cracked, dented, damaged screens... Let's see some pics. Who has the worst damaged but working MBP?

View 23 Replies View Related

PowerPC :: IBook G4 LCD Damaged After Drop

May 6, 2007

Our family iBook G4 1.42 MHz was dropped from the arm of a chair onto the carpet (two feet) by one of our children. The display is shown in the picture. I've taken the LCD off and then replaced it thinking a cable might have come loose, but it didn't fix the problem. Does anyone have an opinion as to what is damaged? Is it the LCD? The circuit board in the display housing, or something in the main case? I've not taken the main case apart, but I will try that next.

View 3 Replies View Related

PowerPC :: 12 Inch Powerbook Not Starting Up / Using Install Disk From A 15 Inch Powerbook G4

Oct 15, 2008

My 12 inch powerbook does not start up. Instead it loads to Darwin. I have an install disk from a 15 inch powerbook G4 and I would like to know if using this would work on my 12 inch powerbook G4?

View 3 Replies View Related

OS X :: Powerbook Is Not Working

Jun 1, 2010

I have a 2005 Powerbook and it does not turn on. The power charger when plugged in is solid green but the battery is empty.The power charger remains green even when I take the battery out and plug it directly to the wall outlet.I also have a replacement battery that is fully charged but it still does not power on.

View 1 Replies View Related

ITunes :: Not Working On PowerBook G4?

Jun 15, 2012

I Have A PowerBook G4 and every time I Try to start iTunes it says :iTunes requires QuickTime 7.5.5 or later. For more information on upgrading your computer, visit [URL].

Info:
PowerBook, Mac OS X (10.5.8)

View 1 Replies View Related

PowerPC :: New HD And RAM For Powerbook?

Nov 22, 2006

I have a Powerbook G4 1.5 w/ 1GB of RAM and the stock 80GB HD. I've run this puppy pretty hard for a couple of years now, and it's lately started to lag a bit - perfectly natural. I was considering buying a new notebook but I've decided to wait until after Leopard comes. So my question is:

1) How do I determine the max RAM I can put in this machine?
2) Are there are specific specs I need to be concerned with when swapping out the Hard Drive? Any type, size limitations, speed limitations, etc.

I'd love a little input as to how I find out this info. I think instead of taking the notebook plunge now, I'm going to put a nice new hard drive in this one and possibly bump up the RAM a little more if it will take it.

View 3 Replies View Related

PowerPC :: Is Powerbook G4 802.11g Or B

Mar 14, 2007

So is the is Powerbook G4 802.11g or b? it is the 1.25GHz model. Also, one thing I don't understand regarding the airport extreme or any airport for that matter: isn't the maximum speed going to be completely determined by how much the cable provider, Comcast, pumps out?

If this is the case, how do I determine what my transfers and speeds are looking like specifically for Comcast? And, how would an airport extreme improve upon this or any other performance aspect in this regard?

View 6 Replies View Related

PowerPC :: Old Powerbook G4 Needs More RAM

Jul 18, 2007

Powerbook G4 (Ti-book) 667 mhz, 512 mb RAM. I finally after YEARS upgraded my OS (10.4.10), yay me! Just bought Adobe CS3 (for the new IMAC we have yet to buy), but I would like to install it on my Powerbook. SO, it it time to bump up to 1GB RAM. I was told it was tricky, and I should take it in to the apple store to install, but then I took a look under the keyboard, and it looks pretty simple. i have installed new RAM on a G5 tower, and this looks way easier. So, I am planning on buying the RAM either online or at FRY's, then installing it. BUT, I know I have to be careful of what type of RAM to buy. I found what I think will be good at [URL] but I will have to buy 2 (512's) as mine currently has 2 (256). I guess I just want to make sure I am not going about this the wrong way before I drop about $200 for RAM upgrade...

View 3 Replies View Related

PowerPC :: Right RAM For Powerbook G4?

Sep 27, 2007

I have a 15' Powerbook G4 1.67, currently with 512 of ram....so i'm shopping for an upgrade, but not sure which specific type to go with. In my system profile it says i'm running..

Type: DDR SDRAM
Speed: PC2700U-25330

And these are the types i've been seeing to choose from.

G4 15-inch 1.67GHz (DDR M9676LL/A) Memory
G4 15-inch 1.67GHz (DDR M9677LL/A) Memory
G4 15-inch 1.67GHz Double Layer DDR2 (M9969LL/A) Memory

View 1 Replies View Related

PowerPC :: Using PowerBook And Ram?

Sep 3, 2008

I just bought a used 12" powerbook G4 1.5ghz and I want to add some ram to max it at 1.25Gb. Did anyone try to use ddr400 instead of ddr333 on powerbooks? In theory it will run at 333 like in any pc, but is this flawless in powerbooks? Because ddr333 is expensive nowadays.

View 3 Replies View Related

PowerPC :: How Much Could Get For Used Powerbook?

Sep 6, 2008

I know the powerbook is rather archaic now, but I'm trying to get a new Macbook and don't want to throw my old powerbook away. So.. I have a friend who wants to buy my old G4 Powerbook with 60GB capacity, 512 MB memory, 1.33 GHz cpu speed. It's extremely worn in, meaning, it won't last more than 20 minutes off the power cord, but someone could always replace that. So what would be a fair price to charge someone to take it off my hands?

View 1 Replies View Related

PowerPC :: Ram Of Powerbook G4

Jul 22, 2009

I bought a powerbook G4. The ram is 512 mb but i want to upgrade that. Is it possible to place two 1gb cards in each slot. That i have a total of 2gb ram? Me was told that the max of the powerbook G4 is 1 gb. Is that true? And when it is true, is it smart to buy a total of 1gb for the powerbook g4? Or doesn't make that any difference?

View 6 Replies View Related

PowerPC :: What HDD To Buy For Powerbook G4?

Aug 9, 2009

I believe the hdd is dead so I need to find a replacement but I've no idea which cause there are 93487534231 kinds. Only thing I can really find via googling is that it has to be a 2.5" ATA but there are several different kinds of ATA hdds... so confusing. I was thinking this? [URL]

View 7 Replies View Related

OS X :: G4 Powerbook Not Working / Cable And Battery Are Fine?

Aug 13, 2010

I am hoping someone can give me some advice. I have a G4 Powerbook that I've had since 2003 (yes I know in computing terms that's ancient-but we were getting along fine...!) 15 inch, 1.25GHz/512/80/SD. Replacement battery about 18mths ago, no other problems.

On Wednesday evening it completely froze and I had to press and hold the power button to turn it off. And that was it, nothing more, no whirring, no noise-It just won't do anything. Have tried resetting the PMU-several times, ac cable and battery are fine.

View 5 Replies View Related

PowerPC :: Powerbook G4 RAM Beeps

Aug 26, 2010

Just replaced the logicboard on a 01' Powerbook G4 Titanium Onyx and I'm getting the no video/beeping sound after the chimes upon power up.

3 beeps
3 lights (1 long + 3 quick flashes)

I don't THINK it's the RAM though, I thought these cards were good before the computer fried. I've swapped the two 256MB cards with each other, also plugged just one RAM card in both slots one at a time--still no turn on and I get the 3 beeps. Unfortunately I don't have any extra 144-pin 133 Mhz SDRAM chips laying around or i'd just test them. It seems unlikely that both RAM cards would be broken, in addition to the logicboard frying, unless the two events happened simultaneously. Previous install had the 667 Mhz upgraded processor and when I took the logic board out it was fried on the bottom with lots of corrosion/leakage on a good 5% of the surface area. Anyways, I replaced it with a 550 Mhz board. Could the beeping be from installing the different processor or is it more likely that I simultaneously fried both RAM chips plus the motherboard?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved