So what I thought would be a quick fix on my PB 12" Aluminum (867Mhz) has given me days of frustration. After I cracked the LCD on my PB G4 12" Alluminum (Model A1010), I tried find my way around shelling out $350 for a new lcd. The original LCD was a Samsung LTN121XJ-L01. After surfing Ebay for a while, I mangaged to find a completely new Samsung LTN121XJ-L02, which is essentially the same LCD with a different suffix (L02 instead of L01). I assumed that this would not matter at all since the LCDs are identical, but after swapping out the old cracked LCD for the new one I was completely bummed to see that new LCD dead at birth. I get no response from the LCD, unless I hook up the backlight wires of the new LCD to the old inveter and then connect the LCD flexcable to the old, broken LCD. When I do this, the backlight functions and the new LCD turns grey with no image. I've already reset the PMU, PRAM and NVRAM. I don't know what else I can do. Is this LCD completely incompatible with the old one? I don't see why it wouldn't be.
i've had my top case replaced three times already and it's broke again. it only takes a day or two to get it replaced at my local authorised repair centre, but is it worth ringing apple and trying to get the machine replaced? i mean, there's no point in replacing the machine with the same model because it'll just happen again, but i can't imagine apple giving out one of the new machines though.
for reference its a 2.2GHz white macbook bought in november 2007 and the top case was replaced the first time around jan/feb 2008, and then twice in 2010. obviously the applecare runs out in november of this year so want to get this sorted out asap.
So recently I found a cheap powermac G5 on ebay and won the deal and all, but when the computer arrived it was horribly dented. It was packed with on piece of under a 1/2" Styrofoam. In the end I got a full refund for the computer and the seller just said that I could keep it if I want it. So I wanted the thing on my desk so I went ahead and bought another case for it. Now here's the question, has anyone done this or knows how to do this? I want to keep all of the internals inside for it not to become a month or so long project in my spare time. I am not sure on a tool that would let me get up into the edges. If you want to see some video of the unboxing of the case and at the end some footage of the dented one and how bad it is go here.
I have a 12" powerbook g4 that has fallen off the couch or ottoman many times, mostly because roommates never seem to realize that if you catch a cord on your foot that you probably shouldn't continue to walk. This is also because of the inferior non-magsafe charger. This ends up with the powerbook to land right onto the charger and bend the **** out of the male end. In fact I just received my 4th charger and now it doesn't work, I have a multi-meter so I know the charger has juice, but the computer isn't charging. Any advice before I bite the dust and totally dismantle this beautiful machine and place a new DC-in board into it?
After spending a lot of time troubleshooting and researching to figure out what's wrong with my ibook I concluded to about 90% certainty that I need to replace the DC-in board. I ordered and received a replacement - and the necessary screwdrivers, etc - from ifixit, only now I find myself just staring at the laptop like I'm about to perform open heart surgery.
My questions are:
Is doing this myself high risk for someone who has never so much as seen the inside of a computer?
Roughly how long should this take me to do? I don't want to start it without some sense of the time commitment involved because I'd rather do it all in one sitting.
And lastly, from what I've seen in guides/tutorials it looks as though there's some prying involved in removing the casing and I'm wondering just how much finesse is required in closing it back up. Does it snap back in easily?
I just need help trying to take out this darn hard drive. It won't come out. There are two hard drives in my G5 right now, I'm trying to pull both of them out. I tried to do the bottom one first, didn't work. Tried the top one, didn't work. I'm stumped, and I tried my hardest to take them out. I followed these instructions: http://www.info.apple.com/usen/cip/pdf/g5/073-0851.pdf
I went through all the steps to change the optical drive on an old 500 MHz iBook G3, but am unable to attach the bottom case. The problem is the two long (20mm) screws near the back of the computer -- each apparently has to insert into something that looks like a gold-colored nut with serrated edges, like gears, otherwise the screws just rotate in place and don't "lock up." I'll attach a picture, but my only digital camera until I borrow one from a friend is my cell phone, so the pic won't be too good. The gold pieces fell out during the disassembly process and I can't figure out where they now go.
Could really use some advice on a PowerBook problem! Unfortunately the PowerBook in question (12" G4) belongs to my mum who lives a fair distance away, so I've not been able to do any 'hands on' diagnostics. Basically she was using the machine yesterday when it randomly started emitting a high pitched squeaking/scratching sound (she described it as screaming though, bless). She called me and I asked her to turn it off - gave it a couple of minutes and asked her to try turning it on again. When she did the computer immediately started making the same noises (even before the startup 'bong' sound). Today one of her friends who is a little tech savvy took a look at it, and figured it must be the hard drive. Fortunately he was able to retrieve all of the important data from the computer whilst enduring ear-splitting screeching.
1. Does it sound like the problem really is the hard drive? It does to me, though I'm not an expert - however would hate to waste money on a replacement drive to find out that wasn't the problem in the first place.
2. Is it worth replacing the drive? Any idea how much it would cost to replace the disk? Is it something that could be done by myself, or would we need to find a specialist repair person to do it? Would it likely be more cost effective to get a new laptop?
The money issue is pretty key as she's in something of a tight spot at the moment, so trying to find the cheapest solution that will get her computer working again asap. As she lives in a rural area and is housebound her laptop is very much a lifeline for her, so would be good to get it sorted.
I have a G3 IBook 500 mhz with 2 usb ports. The clock and date don't stay set so I think I need to replace the back up battery. I am wondering how difficult this is to do on it. On my G3 Powerbook it was fairly simple.
The cord on the 45w power brick for my iBook G4 has frayed and is no longer usable. I am considering removing the jack from the iBook cord and splicing it onto a 45w yo-yo-style cord (originally used with a 1400) that I have. Are there any issues associated with this of which I should be aware? I want to resolve my problem, but do not want to break my computer in the process, of course.
My iMac died a few days ago. I shut it down the previous night, and then in the morning when I went to turn it on, nothing happened. The screen display doesn't turn on, nothing. I opened it up and did the LED tests, and found that the first one would turn on, but none of the others would. The apple site says to take it to a store and have it fixed.
Now, I bought my mac on December 19th, 2004 ( what a day that was). At the time, I didn't think I'd need to buy applecare or anything. So about how much do you guys think it would cost to replace the logic board? And also, how long would it take to have it replaced?
I've recently been having problems with my iMac G5 iSight after downloading iTunes 9. After a series of freeze-ups, i noticed a visual anomaly appear on my screen. Little hash-marks all over the display were present, and playing DVDs or iTunes visualizer would result in a checkerboard pattern. After doing some research, I found out this was a logic board problem, and it was not uncommon for iMac G5s. However, I kept using my computer for a few more months when it then started freezing two minutes after boot up. I figured it was time to open up the computer and take a look. But after spending the 3.5 hours opening the machine, removing all of the cables and screws, I couldn't find any visible damage on the board. No swollen capacitors like everyone was complaining about. The only strange thing I saw was some discoloration on a few circuits near the USB and Firewire outlets.
I've decided to replace the logic board myself for around $370, and I was wondering about a few things. 1. Would the new logic board come with a processor, or would I need to pry it off of my old one, and re-attach it?
2. Would I need to go through a lot of re-programing and software issues if I replaced my logic board, or would it just start running right off the bat after replacing it?
3. Is this operation worth it? Because I have come to like my iMac after 5 years of use, and I would like to know if fixing it would give me a decent amount of usage before I would simply need to replace it
I've been lurking for the last 12 months but haven't posted until now. Does anyone know if it's possible to purchase a new PCB and lead for the power input. My youngest kid pulled my mac off the sofa and it landed right on the input which knackered up the lead forcing me to buy a cheap chinese job. I've taken the cover off and pulled out the small PCB to inspect it and it did have a cracked solder. I fixed that but the connection is still very fussy, I can't move the mac much or it will switch off (dead battery too). While I'd love to go out and buy a brand new macbook I simply can't afford it right now so patching up this one is my only choice. It needs ram, new battery, proper lead and power supply PCB. All easy to find except the PCB.
I have an old iBook G4 with a dead logic board, everything works fine for about 10-15 minutes, then the display stops responding. The hard drive continues to spin, processor still chugs, etc. I'm going to leave it running iTunes in a few minutes and when it freezes, hit the space bar to see if the actual machine still responds. (In which case I would be sure that it's the video card, or some cable in that area.)
My question: I'm looking on eBay for replacement logic boards, and I'm wondering how specific/universal they are. Obviously, it needs to come from a 14" iBook, but does it matter what processor speed? Eg. Will a board from a 1.2GHz iBook work? I have the iFixIt guide, and I'm not too worried about wrecking the thing, so it's just a matter of making sure I get the right part. (How about this one: Linkety ?)
Well, the hdd in my powerbook has finally died. Won't be recognized in disk utility, and when it was, it wouldn't repair or even verify. I kept getting the invalid node structure error. My AppleCare subscription has also expired about 2 months ago.
So, I went online and found the following web site about opening up the Powerbook 15" (Aluminum) and how to go about replacing things in it:[URL]
Then, I went to tiger direct and found this hard drive to put in it:[URL]
I have a Macbook Pro 2.16 Core Duo, and I'm wanting to install 10.6, but about a year ago, I cracked my screen to the point that I cannot make anything out on it, and haven't replaced it. Instead, I have just been using it in clamshell mode, which has worked out fine so far. My problem is that I cannot get the 10.6 install to show up on my external monitor.
I searched around, and could only find one other similar thread that just ended with the author putting it in clamshell and having it work fine. When I boot to the install and close the screen, I just get a grey box on my external display with a black bar on either side of it. I can't seem to find any other resources, so I'm not entirely sure what to do at this point.
I'm planning on running bootcamp win 7 on my MBP. Would it possible for me to use a cracked version win 7 successfully? or does it have to be authentic? Just trying to clear up this issue before I start anything.
The plastic part connecting the screen and the keyboard in my MBP has a crack! i don't know were it comes from, i have never droped it or mishandled my computer in any way. Will a repair be covered by the warranty?
I took my MacBook Pro on holiday with me to do some work whilst away, and I have acquired an unwanted crack down the side of my screen.
It doesn't cause any problems with my viewing as the majority of it is offscreen on the black boarder, however whenever I catch a glimpse of it in my periphery it breaks my heart a little bit- no-one wants a huge crack on the thing they love the most.
Shall I get it repaired? If so, how much, where would be best/cheapest?
i tried to make a post that was long and detailed but it did not take for some reason so i will try to make this one short and to the point.
bought a new MBP 2.5 (about 4 months ago) right before the 2.66 with the price drop was released.
had various issues and had to swap it out 3 times which my new local store had no problem doing. so i finally got a machine with no defects and working perfectly. was very happy.
the other day i had it sitting on the coffee table on with the screen open, i picked it up to move it a few inches and heard a loud CRACK. now my screen goes back further than it should and it slightly tilted to the left. the gap between screen and body is slightly larger on the right side than the left.
i had planned on purchasing apple care towards years end as i have done with the last 6 machines i have owned in the past. i am going to take it into the genius bar for replacement or repair but am afraid they are going to say i broke it somehow... i treat this thing like a baby and there is no reason the hinges should have cracked from just picking it up and moving it while open. it is still working, but i can not deal with the thought that the hinges are now weakened and are definitely going to break eventually (sooner than later now that this has happened) not to mention the gaps between screen and body and being a bit crooked. also, if i open it past 90 degrees, it falls all the way back to the point where it finally catches, which is a lot further than it used to retract. the hinges are definitely more loose and not as tight as they should be. i have never had more issues with a model in my life until i bought this unibody.
so what are your thoughts? what i am really worried about is them saying i broke it somehow and not honoring the repair or replacement (which is not the case) or when i do purchase applecare towards the end of the year that this will be noted and if not fixed properly or replaced then they will not honor the repair if it actually completely breaks. as i think it will eventually if i do not have something done about it ASAP. (if it is noted on the account when i bring it in today or tomorrow) i have never picked up one of my macs with screen opened to have the hinges snap (being only a few months old)
One of my employes dropped something on my new MacBook pro it dented the outside and cracked the screen. I was checking to see if anyone new the cost of repair. Also would it help any to by AppleCare I know it doesn't cover accidental but i am just checking on what I need to do.
A few days ago I posted about a bit scratch that appeared out of nowhere on my brand new iPad, now this: Spilt tiny quantity, maybe 3 ml, of coke onto the case of my mbp and little of it drained into the bottom edge of the trackpad. It became unresponsive and made only a dull click for the next 15 mins. Whilst tapping harder to see if I could get a click out of it (it ofc happened whilst doing something important) the glass of the track pad cracked beneath my finger. Wasn't even tapping that hard.
Gizmodo is reporting that pirated copies of the Photoshop cs4 crack have been determined to have a trojan which gives an attacker root access to your machine. I know this is a sensitive topic to discuss here but I have a question: What can you do to search to see if you have been infected? I did not use a photoshop cs4 crack per se, but my machine was exposed to a similar file that is close enough to scare the bejesus out of me.
I searched the forums, but it doesn't appear as if this question has ever been sufficiently resolved...so I am going to raise the question again. I apologize in advance if I somehow missed a thread.
I have an iMac (20", 2006 model, Intel Core Duo, etc.) that is in excellent, working condition...aside from the fact that it didn't like having its face smashed in. The screen is almost completely covered with the weird leaf-like pattern that forms in such situations...and is thus, unusable at this point.
Can anyone tell me, without a trace of doubt, if it is possible to hook up a new LCD monitor to the iMac and use the old, broken unit as a CPU? If so, what will I need? Has anyone actually done this?
Conversely, would I be better off simply selling the iMac for parts on eBay and putting the $$ toward a shiny new Mac?
So my macbook's wrist pad (right side) has been cracked for awhile now. Started out with a small crack, then growing almost 4cm and then snapping off part of the plastic. I tried superglueing it back on (im resourceful ) but it didn't hold. Now I have a 4cm long piece of plastic missing from my wrist pad, and crusty superglue residue left where my wrist goes.
The left side is starting to crack as well, although, not as bad.
Figured I would ask here before I take it to the apple store:
What will all need to be replaced? Will just the wrist pad be replaced or is it attached to the keyboard
I have broken my Macbook screen it was either glasses cleaner (I use this to clean the screen) or I accidently flipped my Macbook over for no reason and I guess the force of when it flipped over back onto my bed might of caused it to. I'm really annoyed about this and it's not even my Macbook it's my friends. I am fine to pay $$$ to get this fixed as that is not really a problem for me tbh (When I get paid) but I was post up some photos and if you give me some advise on what it could be and how it could be fixed then I will be very pleased. (From the photos you will be able to see that the damage only appears when the laptop is switched on and when I touch the screen it does not feel cracked but if you look directly down on it then it looks like their is a separate layer, like from where the broken bit of the screen is and the working bit is.)
My macbook pro screen just cracked in two different spots basically where my fingers were touching it as I was rying to close it, The screen and the base were very hot, will this be covered by Apple ?
Had my iphone 3gs for around 4 months now, it recently stopped turning on for some reason. I've tried everything but when I woke up this morning to turn on my phone it just didn't start... it looks beat up around the edges, is missing the volume button on the side, and has a crack, HOWEVER it has no water damage. The only reason it's so beat up is because I skateboard and I keep my phone in my pocket and for some reason the plastic doesn't hold up too well... The sensor is 100% white though and its not really my fault it broke they just built it .I think they might replace this is if I go and complain about it not turning on and seeing if they can fix it, if they can't hopefully they will give me a new one.
