I went to the Genius bar and they told me to Control, Option, P, R on a reboot to restore the settings, but with a wireless KeyBoard it does not work. I installed my standard PC keyboard, but am not sure what keys renase the display back to factory settings.
Info:
Mac mini
I've been using my Intel Mac-Mini without a hitch for three years now. Previously it had been plugged into a Samsung 32" LCD TV, but I've just swapped it over for a 1080p Panasonic 37".
Now when I turn on the mac it takes a long time to boot up and then eventually settles on a blue screen. The mouse pointer is visible but nothing else. I've tried using a dvi to vga adaptor and an HDMI to vga cable and the same thing happens.I tried a 15" Samsung monitor and the same thing happens.
If I boot in 'safe' mode it allows me to type in my password but when I try to log in it fades to blue and then returns to the log in page.
So I have a DYNEX 21 inch HD TV conected up to my MBP via the VGA connection route. My problem is that when I want a program (or more specifically in this case a game) to go into fullscreen mode it automatically goes to my primary monitor and turns the other screen black. I know I can switch the primary monitor from my actual laptop screen to the TV however I just want the game to be full screen on the TV while still having access to my dock and everything on my laptop.
View 2 Replies View RelatedMy MAC powerbook was working fine yesterday! I shut it down last night and when I tried to boot it up this morning I get: the booting "sound" and the grey screen after which the screen turns to black and in the top left-hand corner
View 3 Replies View RelatedMacbook is charged up. Sounds like it's turning on but no tone. Screen stays black.
Info:
MacBook, Mac OS X (10.7.3)
imac turns on but screen stays black ? i can hear it operating ...
Info:
imac 20" and macbook 13", Mac OS X (10.5.1)
I can hear the chime going off, but the display turns on you cannot see through naked eye, you have flash light onto to the screen to see very little, can you tell me why this is happening and how to fix this issue. Secondly, can you tell me how to fix this issue, my keyboard and trackpad doesn't work. Is it the problem of flex cable of both the keyboard and trackpad or is the related to software
Info:
MacBook Pro, OS X Mavericks (10.9.4)
My macbook pro late 2009 (10.6.7) when i press the power button it turns on, then it turns off by itself and then on again and gets a black screen and nothing more no booting sound and i just hear the fans or the Hard Drive going...
Info:
MacBook Pro, Mac OS X (10.6.7)
my computer turns on but there is only a black screen. i hear the sounds and am able to press buttons but nothing is seen. how to I fix this?
Info:
MacBook Air, OS X Mountain Lion (10.8)
My screen is black but my laptop is not off.. and its not that only the screen is black, my mac on sleep (i think)...When I turn my mac on, it does turn on.. The starting screen comes out.. but the moment the desktop opens, the screen goes black. And if I try to wake my mac up by pressing any key, the mouse shows for like three seconds(on the black screen, not my desktop). So that means that my mac is not totally off, it's just that the screen is black. But once in a while, when I press any button, my desktop shows for five seconds and the screen turns black again. I had yesterday was that the finder was keep restarting. I was still able to go on all the apps except that I could not open any files on my desktop.
View 1 Replies View Relatedmy MBP is really screwing up these days. Basically the best way I can describe it is that randomly once in awhile (no matter what I'm doing, usually surfing the net) the screen flickers a few times, then most of it turns black (except usually for a small part on top that stays on whatever it was displaying before). The section between the part that stayed the same and the bottom is sort of "multicolored".
The computer does not respond to anything except holding the power button down for 5 seconds until it shuts off. If I try to adjust brightness or sound level, nothing happens. Anyway, I took it in to apple and they claimed it was the motherboard, so they replaced it. But today I had the problem again! What else could it even be? Any chance its the RAM/screen/hard drive?
Anyone else noticing their new macbook air freezing randomly and the screen just turns completely black? The back light is still on but nothing is on the screen.
None of the buttons work, can't force quit anything, i have to hold power button to turn it off then back on.
It has happened to me twice already, first time when i was installing the adobe suite, second time is when I was working on a school assignment with a simulation app (not cpu or memory intensive AT ALL).
when working on my new Imac sometimes the machine put itself in sleep mode! The screen turns black and I have to enter my password. Sometimes it happens 2 times in 1 minute; other times once in 1 hour.
View 3 Replies View RelatedAperture 3.5.1 on iMac11,3 (Core i7, 2.93GHz, 16GB RAM) and OS X 10.9.4 (13E28)
Son's Eagle Project. Set up GroPro to snap a pic every 10 seconds. Now have 3,000+ photos in Aperture, in slideshow with most running at 1/10th second. Added text annotations.
In Aperture - plays perfectly.
Once exported - 75% through the video, screen goes black EXCEPT that the annotations I've made are retained - so occasionally a timestamp or comment appears on an otherwise black screen.
I've tried multiple export formats, no difference. Am now resorting to inserting timestamp slides between pictures to see if somehow there is a corrupted image that is causing the video export to fail.
Have replicated problem after a reboot with nothing of substance other Aperture running.
Info:
iMac, OS X Mavericks (10.9.4)
It was just an accidental liquid spill, but however my macbook pro has been acting up before all this mishap with the graphics. I thought is was just nothing so I didn't care to bring it to an apple store but when I had to bring it and check it out using the Nvidia video test it presumed a failed video card. The genuius said it will take 2 weeks to be fix until several days later I recieved a call saying it can not be fix due to a foreseen amount of liquid damage. I've spilt other liquid items but wiped it off the keyboard quickly and it still worked. I'm using my MBP right now with an external monitor, it still works fine but with the issue of the screen being pitch black.
Info:
MacBook Pro
I configured my MacBook Air to request a password after the screen turns on in "Security And Privacy". But then I realised that can change this option without unlocking the padlock. Here is a screen picture. I think is a very important security problem.
Info:
MacBook Air, OS X Mavericks (10.9.2)
When installing apps through Installer (from .dmg disk images and .pkg packages), everything works smoothly until it asks me for a password. When I enter it, Installer goes back to the screen before it asked me for the password. When I click next, it asks me for my password, and the cycle repeats. I tried removing my password to no avail. I can install .pkg files from the sudo installer -pkg command. I dont know how to do this for installers that are in app form.
Info:
MacBook Pro, Mac OS X (10.7.3), MBP Early 2011
The little progress spinner thing below the apple just spins and spins. The computer said that several apps stopped responding and had to quit after falling asleep watching a movie in VLC, which had error logs that had frozen on the screen as well saying, "Computer too slow?" from dropped frames apparently. Not normal. Also, yesterday, when waking it up from the display shutting down, the whole screen was gray and smeared looking. There was nothing recognizable at all on the screen, and I hit the power button quickly for it to sleep, and back again and it worked fine for the rest of the day. Its a 1.66 Core Duo Mac mini w/ 2gb of RAM.
View 8 Replies View RelatedSoo...I just picked up a mini to run plex and use as a media center. Hooking it up to my projector via VGA cable. When I set the display settings to the native resolution on the projector there is a small black line or bar down the left hand side of the screen. Not on the right but only on the left. why this would be happening?
View 6 Replies View RelatedNew to Mac computers. When trying to open computer after being in sleep mode, I clicked the mouse to open the password screen, & a blank blue/black screen appeared & the mouse timer( colored circle) appeared, as if to be waiting. I had to unplug the computer to reboot it. This has happened twice in 2 days.
Info:
iMac (27-inch Mid 2011)
I am trying to uninstall Virex 7.5. I have got the Terminal uninstall command which opens Terminal. So far, so good. However, Terminal is asking me for my admin password but it's not allowing me to enter it. The cursor is not blinking it's just a solid black oblong - just bl**dy sitting there! Absolutely no response to any key except the enter key - then terminal helpfully says, 'Sorry, try again' What's going on? I just wanna get rid of Virex!!!
View 3 Replies View RelatedYes I know other people have posted this and gotten the answer that you just put it ion anyways and you wont see it come up but it works. Well I do not actually have a password set so usually I just hit enter with it blank but when I do that in Terminal it says sorry wrong password or something until I hit the 3rd try and it boots me.
View 1 Replies View RelatedI just recently upgraded my safari ( or something else don't quiet remember but i got the newer version of something) it asked to restart my computer to complete the download... well I don't quiet remember my user and password. sorry but I'm pregnant and my memory sucks. So it gives me this black screen asking my info like
Darwin/DSB ( my initials) ( console)
LOGIN: know it now( my husband told me what it was)
password:forgot
I connected mij Mac mini to my tv and it works great. Until I change something to the screensetting or play game with other screensettings. The start flickering. A black screen apears every 10 seconds and the says it lost connection.
View 2 Replies View RelatedNewest Mac Mini, My screen will randomly go black for several seconds and return without my doing anything to get it back. It happens while workin in various programs, browsing, etc. The computer is set to require a password on return from sleep but when these events occur the display returns to whatever I was doing, no login required. Everything is up to date.
Info:
MacBook, Mac OS X (10.7)
I just bought mac mini few weeks ago everything is great apart from every now and the the screen goes black for a second.
View 1 Replies View RelatedMy display has not returned- 15 minutes and counting.
Info:
Mac mini
My faithful and trusted Intel Mac mini 1.83 C2D that I bought new in December 2007 suddenly died during a major 10.6.3 update install. It almost completed the update and the screen went black and the light went off instantly. The power button doesn't respond at all. I had major work projects going on Sunday night when I took a break, quit all applications and did the software update and it died. I took it to the Apple Store Monday morning thinking it was the power supply. I was informed that the logic board is dead and my HD has to be wiped and OS X reinstalled. The repair would cost well over $300 and have a 90 day warranty with the same logic board installed that could fail again. Ironically enough, I had been thinking about buying another new Mac mini and a new Mac mini Server for work. That's not going to happen now. I left the Apple store with my new $600 paper weight for my desk. What would you do? This was a sad day in my faith in Apple products. Apple Mac mini lemon? While my 500Mhz Cube serves me very well day to day at work, I do need my 10.6 Mac mini to run iMovie '09 to put together my videos for [URL]
View 24 Replies View RelatedI changed my admin password and now it won't let me log in. It keeps asking for my keychain password. I can't enter my old password or my new password. What do I do?
Info:
iMac
Today, I bought a vga adapter for my unibody macbook and it is not working. I hooked it on a 22 inch Samsung 225MW screen and it the screen shows a message "check your cable (PC)".
View 7 Replies View Related