Intel Mac :: Turns On But Screen Stays Black ?
Jun 19, 2012imac turns on but screen stays black ? i can hear it operating ...
Info:
imac 20" and macbook 13", Mac OS X (10.5.1)
imac turns on but screen stays black ? i can hear it operating ...
Info:
imac 20" and macbook 13", Mac OS X (10.5.1)
I can hear the chime going off, but the display turns on you cannot see through naked eye, you have flash light onto to the screen to see very little, can you tell me why this is happening and how to fix this issue. Secondly, can you tell me how to fix this issue, my keyboard and trackpad doesn't work. Is it the problem of flex cable of both the keyboard and trackpad or is the related to software
Info:
MacBook Pro, OS X Mavericks (10.9.4)
This 5 year old iMac makes the seek optical drive sound when switched on, but does not chime, but I can hear the hard drive going afterwards.
The screen just stays black, not a flicker.
The problem is that it is located in a small pretty isolated town in NE Brazil, I will be going back out there later in the summer so if anyone has any helpful ideas it would be most welcome. Fortunately we have a full CCC clone of the hard drive and a working MBP so we haven't lost anything, but it would be very good to have it working again.
Does it have a socket for an external monitor, I really cannot remember, as I have not seen it since November, I know the old round iMacs had one.
The nearest Mac store is probably in Rio or Sao Paulo which are a good day travelling by car and plane so there is no chance of getting it there.
Info:
iMac, Mac OS X (10.4.11)
The latest iMac model. When I click on the power button: I can hear the Hard disk and the DVD drive spin up. The screen stays black. The startup sounds plays half way through the first time, like its being cut off. After the first startup chime has been cut, the chime keeps playing in a loop. The computer doesn't come any further than that.
I have tried: Unplugging all peripherals, with the same result.
SMC reset: Unplug power cord and hold power button for 5 sec. PRAM reset...
It seems like the computer does not even get to boot and ignores all keyboard input. I also tried booting from the DVD drive with the installation disk. But I can't get any further than the repeating startup chimes.
additional information: 27" Intel based 64 bit 8GB ram dual boot with windows 7 I tried resetting my pram
Info:
iMac (27-inch Mid 2011), iOS 4.3.1
Loaded pics up for the 1st time from my 7d into Aperture 1.5 and left my computer on, woke up and it wouldn't come out of sleep. I did a hard shutdown holding down the power button and the screen just stays black and I never hear the chime, light on power button is solid white. Since I'm on vacation with my wife and infant daughter I don't have time to mess around troubleshooting but see it may be a failed logic board? Do they just fail randomly or what? My aunt that I'm staying with turned off a surge protector a light was plugged into, I was using her power charger for her MacBook Pro and only this morning found out it was plugged directly into the outlet below the surge protector was on that she flipped off.
Could that have created a surge on the other plug or something? She does this all the time with her MacBook Pro plugged in and its never created a problem, I'm writing this post from her computer right now! (Only brought the Mac out because my iPad wouldn't load the photos for some reason, don't know if it has something to do with the HD video or because I also had photos from my Canon 50d on there or if that has something to do with my Mac's problem?) I've attempted an SMC restart and it does the same thing? I'm now extremely stressed thinking I may have lost all my pics that I haven't backed up in months of my infant daughter. When I start it up I hear an initial sound of a hardrive spin or fan but then its basically silent.
Mac book pro starts up but screen stays black. I have tried taking the battery out, waiting over night it still is black
Info:
MacBook Pro, iOS 5.0.1
My 2007 MacBook is starting up and making all the right noises but the screen stays black - looking on different forums it seems likely it is either the back light or the inverter that need fixing but in the meantime there is some things on there I need - I have an IMac as well and I have tried to connect the too so that I can view the macbook on the imac - I used a firewire cable and held down the t key on the macbook (but obviously couldn't see if it had worked) I then turned on the Imac and held the option key down but it only give me the IMac HD to start from and not the Macbook
View 2 Replies View RelatedI have a 24inch iMac 3.06ghz and seems to be stuck restarting. It will not get to the any screen (just stays black) and constantly restarts, the chime seems to get quieter each time, after about 6 times it comes back to full volume but will not get any further in the start up process.
I restarted it myself because the screen was flickering very quickly and seemed to freeze (this is the first time I have encountered that). I had to power down by the button at the back, then restart using the power button and now won't start up. All software fully up to date. Running Lion.
Info:
iMac, Mac OS X (10.7)
So I have a DYNEX 21 inch HD TV conected up to my MBP via the VGA connection route. My problem is that when I want a program (or more specifically in this case a game) to go into fullscreen mode it automatically goes to my primary monitor and turns the other screen black. I know I can switch the primary monitor from my actual laptop screen to the TV however I just want the game to be full screen on the TV while still having access to my dock and everything on my laptop.
View 2 Replies View RelatedI have a 2006 Macbook that when powered up, the screen stays black, the machine beeps 3 times, and sleep light blinks 3 times before the process repeats over and over. When doing a search, I saw something about the RAM but
Info:
MacBook
I have an early 2008, 24-inch iMac. This problem started after I installed an OS X Mavericks update (and has continued). Basically, after the screen is asleep for a while, if you come back and move the mouse / tap the keyboard, the desktop never reappears. The screen stays black but the mouse cursor shows up and you can drag it around. I've seen some similar issues that said they could get the app switcher, but that never happens for me. Just mouse cursor and black screen, no matter how long you try to wait it out or tap buttons. The only solution is a cold restart, although I think in the past I was able to fix by turning off energy saver settings for putting the display to sleep. It doesn't happen every time, I'd say it happens over 50% of the time. The problem actually kicked in with one particular App Store update of Mavericks. I believe it was 10.9.3 if I recall correctly.
View 1 Replies View RelatedMy MAC powerbook was working fine yesterday! I shut it down last night and when I tried to boot it up this morning I get: the booting "sound" and the grey screen after which the screen turns to black and in the top left-hand corner
View 3 Replies View RelatedMacbook is charged up. Sounds like it's turning on but no tone. Screen stays black.
Info:
MacBook, Mac OS X (10.7.3)
My macbook pro late 2009Â (10.6.7) when i press the power button it turns on, then it turns off by itself and then on again and gets a black screen and nothing more no booting sound and i just hear the fans or the Hard Drive going...
Info:
MacBook Pro, Mac OS X (10.6.7)
my computer turns on but there is only a black screen. i hear the sounds and am able to press buttons but nothing is seen. how to I fix this?
Info:
MacBook Air, OS X Mountain Lion (10.8)
My screen is black but my laptop is not off.. and its not that only the screen is black, my mac on sleep (i think)...When I turn my mac on, it does turn on.. The starting screen comes out.. but the moment the desktop opens, the screen goes black. And if I try to wake my mac up by pressing any key, the mouse shows for like three seconds(on the black screen, not my desktop). So that means that my mac is not totally off, it's just that the screen is black. But once in a while, when I press any button, my desktop shows for five seconds and the screen turns black again. I had yesterday was that the finder was keep restarting. I was still able to go on all the apps except that I could not open any files on my desktop.
View 1 Replies View Relatedmy MBP is really screwing up these days. Basically the best way I can describe it is that randomly once in awhile (no matter what I'm doing, usually surfing the net) the screen flickers a few times, then most of it turns black (except usually for a small part on top that stays on whatever it was displaying before). The section between the part that stayed the same and the bottom is sort of "multicolored".
The computer does not respond to anything except holding the power button down for 5 seconds until it shuts off. If I try to adjust brightness or sound level, nothing happens. Anyway, I took it in to apple and they claimed it was the motherboard, so they replaced it. But today I had the problem again! What else could it even be? Any chance its the RAM/screen/hard drive?
I went to the Genius bar and they told me to Control, Option, P, R on a reboot to restore the settings, but with a wireless KeyBoard it does not work. I installed my standard PC keyboard, but am not sure what keys renase the display back to factory settings.
Info:
Mac mini
My brother's iBook G4 (I think it's a 2003 model) has a problem with the screen. When the computer is turned on, the screen stays black, although the backlight is on (the apple glows). Sometimes, on start up, the screen works normally for a random amount of time before going fuzzy and then black again.
Any ideas on how to fix this? Is it likely to be a problem with the hardware in the actual computer, or just the screen? Or is it a software thing?
Anyone else noticing their new macbook air freezing randomly and the screen just turns completely black? The back light is still on but nothing is on the screen.
None of the buttons work, can't force quit anything, i have to hold power button to turn it off then back on.
It has happened to me twice already, first time when i was installing the adobe suite, second time is when I was working on a school assignment with a simulation app (not cpu or memory intensive AT ALL).
when working on my new Imac sometimes the machine put itself in sleep mode! The screen turns black and I have to enter my password. Sometimes it happens 2 times in 1 minute; other times once in 1 hour.
View 3 Replies View RelatedAperture 3.5.1 on iMac11,3 (Core i7, 2.93GHz, 16GB RAM) and OS X 10.9.4 (13E28)Â
Son's Eagle Project. Set up GroPro to snap a pic every 10 seconds. Now have 3,000+ photos in Aperture, in slideshow with most running at 1/10th second. Added text annotations.Â
In Aperture - plays perfectly.Â
Once exported - 75% through the video, screen goes black EXCEPT that the annotations I've made are retained - so occasionally a timestamp or comment appears on an otherwise black screen.Â
I've tried multiple export formats, no difference. Am now resorting to inserting timestamp slides between pictures to see if somehow there is a corrupted image that is causing the video export to fail.Â
Have replicated problem after a reboot with nothing of substance other Aperture running.Â
Info:
iMac, OS X Mavericks (10.9.4)
It was just an accidental liquid spill, but however my macbook pro has been acting up before all this mishap with the graphics. I thought is was just nothing so I didn't care to bring it to an apple store but when I had to bring it and check it out using the Nvidia video test it presumed a failed video card. The genuius said it will take 2 weeks to be fix until several days later I recieved a call saying it can not be fix due to a foreseen amount of liquid damage. I've spilt other liquid items but wiped it off the keyboard quickly and it still worked. I'm using my MBP right now with an external monitor, it still works fine but with the issue of the screen being pitch black.
Info:
MacBook Pro
Why is the green light next to the iSight on? I am not using any programs that use the thing and the thing is on! It wasn't on like this before.
View 14 Replies View RelatedI receive a dialog box asking to allow or deny Adobe Flash to install something on my iMac when I run Flash enabled web content. I cannot select the allow or deny buttons and the box stays on screen throughout the video. I have downloaded the latest version of Flash and my software is up to date.
Info:
iMac, Mac OS X (10.6.7)
My iMac won't boot up fully. It stays stuck in the gray screen with the pinwheel spinning, then after about 5 minutes just shuts itself off.
Info:
iMac (20-inch Late 2006)
Since a couple of days, my screen (iMac 27" mid 2011) turns off. Also, half of the screen looks darker. Is it a hardware problem or maybe can be solved by software?
Info:
iMac, Mac OS X (10.7.3)
Desktop restart shows flickering black/white screen, then black. Could not restart.
Info:
iPad 2, Mac OS X (10.6.6)
I got home to find my mac was unresponsive. I thought it had fallen to sleep so i kept pressing keys on the keyboard and clicking the mouse. Nothing happened, I tried everything. So I turned it off by holding down the power button and turned it back on. But then 10 mins later while using it, the screen just instantly turned off! The iMac was still running, it even had the music still playing in the background from iTunes, but again it was unresponsive to my commands. After 1 minute the music turned into an awful static cry for help. So i turned it off. Here i am again on the Mac after turning it back on, but i'm scared it could just go again any second.Â
Info:
iMac (20-inch Late 2006), Mac OS X (10.7.4), 2.16 Ghz, 3GB Ram, 256MB Gfx 1TB HD