Intel Mac :: Software Update - In All Its Forms - Fails?

Mar 18, 2012

Whenever I click on the Apple logo and Software Update, the progress bar gets to about 20% in 3 or 4 seconds and then never moves again. I've left it for over an hour, no change. If I go to Boot Camp Assistant and try to Download the latest Windows support software from Apple, it gets to about 5% in 3 or 4 seconds and then never moves again. I can download from the web and other internet based services work. I am running Lion 10.7.3 on a 2011 iMac. I've tried creating a new user. I've also tried starting in Safe Mode. I have reinstalled Lion. No change. 

Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.3)

View 4 Replies


ADVERTISEMENT

Intel Mac :: Software Update Installation Fails On 10.6.8?

Apr 22, 2012

Since I upgraded my Intel IMac to a 2tb drive I've been getting the software update telling me there are two updates to load (involving a restart) the download works and the instalation appears to be normal until the restart when the system tells me the install failed. Anybody getting the same problem?

Info:
iMac (20-inch Early 2006), Mac OS X (10.6.8)

View 2 Replies View Related

Intel Mac :: Get Into A Website That Requires Adobe To Complete Forms?

Mar 27, 2012

I need to complete forms on a website that requires adobe reader, when I go to the website it prompts me to download adobe reader & then click here to complete forms.  I have downloaded adobe reader 3 times & restarted my computer twice & the website still keeps telling me I need to download adobe reader! 

Info:
iMac, iOS 5.1

View 1 Replies View Related

Intel Mac :: Using It To Fill In Forms Online, The Screen Suddenly Fades Off To The Side And Cannot Get It Back?

Mar 14, 2012

While online at a web site, filling in important forms, the screen suddenly fades to one side and disappears, and I cannot get it back, forcing me to start all over again.  How can I stop this from happening?

Info:
iMac

View 2 Replies View Related

Mac Pro :: Apple 10.6.1 Software Update Fails

May 7, 2012

I recently installed an ATI 5770 on my Mac Pro 1,1, works perfect in 10.6..4 We have another Mac Pro 3,1, whose 8800GT card died, so we replaced it with another ATI 5770.We cant upgrade the OS from 10.6 to 10.6.1 until we reach 10.6.4, all of the updates are failing.

message: The installation failed. An unknown installation error occuredWe are not able to upgrade the OS not even to 10.6.1, and on my machine I had no such problems.

Info:Mac Pro, Mac OS X (10.6)

View 11 Replies View Related

Software :: Update Fails To Connect To The Internet

Aug 12, 2005

Mac OS 10.4.2
G4 (AGP)

I just moved to a new home and unfortunatly my fast internet connection through DSL (3.0 Mbits/sec) had to be changed to something a lot slower running over DirecWay satellite. Whenever I run the software update utility, I get a dialog box that pops up and says, "A networking error has occured: bad server response (-1011). Make sure you can connect to the Internet, then try again. Software Update can't check for updates because of a network problem."

Diagnostics pass, doing standard Internet tasks works just fine, as a matyer of fact, I can connect to the internet, surf, download email, etc. There is nothing different about the system other then I use a different internet provider. I'm wondering does Software Update look for a certain connection speed before timing out? I never got the (-1011) error before moving over to DirecWay.

View 7 Replies View Related

OS X V10.7 Lion :: Software Update Fails Midstream?

Jun 6, 2012

I tried to update to the latest version of Lion -- I have 10.7, and received this message.  

With OS 10.7. whatever as the named update. So, I tried the next night, and now the OS update doesn't show in Software Update - I checked - I'm still running 10.7, and when I tried to download the printer driver - got this message again. 

Info:
Mac mini, Mac OS X (10.7), Macbook Air, iTouch 4th, iPad 1st

View 5 Replies View Related

OS X Mavericks :: 10.9.4 Update Fails With Check Sum Error

Jul 1, 2014

I've tried to download and install Mavericks 10.9.4 update but the installation fails with a checksum error.  I've also tried the manual download/install which also failed.  The message said that the update could not be installed to the default MacintoshHD drive.

View 1 Replies View Related

OS X :: Software Update Fails To Find Internet Connection

Sep 3, 2009

I have a Dual 1.8 GHz Power PC G5 and am running 10.4.11. When I select software update it says, "software Update can't connect to the update server. Make sure you are connected to the internet..." "Software Update can't check for updates because of a network problem." However, my internet connection works fine for everything else. I do have two peripheral drives connected. One of them had the same system as my main drive. However, the problem persists even when they are disconnected and I reboot. I can get the updates if I reboot from the peripheral.

View 16 Replies View Related

Software :: OS X Update Fails - Volume Does Not Meet Requirements

Apr 16, 2010

When I downloaded a upgrade package from Apple [URL] for the Mac OS X v10.6.2 Update, it failed to install on my hard drive. The installation program says: "Mac OS X Update Combined can't be installed on this disk. This volume does not meet the requirements for this update." According to the Disk Utility, the Partition Map Scheme is GUID Partition Table. Some people have listed this as a requirement. What is the real reason for the failure?

View 6 Replies View Related

OS X V10.7 Lion :: Apple Bluetooth Keyboard Fails After 10.7.3 Update?

Feb 6, 2012

I updated to 10.7.3 48 hours ago and my Apple bluetooth keybaord does not work.  My Mac Pro system is several years old and does not have an internal bluetooth.  I have been using a bluetooth dongle successfully.  The keyboard goes through the pairing process normally and appears connected in the System Preferences (Bluetooth) application but no characters appear when typing on the keyboard in any application. 

Info:
Mac Pro, Mac OS X (10.7.3)

View 1 Replies View Related

QuickTime :: 10.1 Fails Since Lion Update - Required Codec Not Available

Mar 20, 2012

Since updating to Lion, and subsequently to QuickTime 10.1, many movies that worked fine before won't open now. I get an error that says, "A required codec is not available." Two things make this even more frustrating:

1. Some movies of the same type still open just fine. I can't seem to find a pattern that links the ones that won't open.
2. The movies that won't open are still available to preview in Finder. If they will play in Finder, why not in QuickTime? Isn't it just a QickTime "plug-in" that plays them in the Finder?

Info:
MacBook Pro (13-inch Mid 2010), Mac OS X (10.7.3), 2.66 GHz Intel Core 2 Duo ; 4GB RAM

View 2 Replies View Related

OS X V10.7 Lion :: Acrobat Fails To Open After Software Update In It

Apr 4, 2012

When opening a PDF in Acrobat x Pro the programme crashes, ever since I did a software update at the end of March 2012.I have also been having problems with emailing PDFs, with emails disappearing or getting corrupted.Seems worse if I have Firefox open at the same time.

Info:Mac OS X (10.7.3)

View 8 Replies View Related

MacBook Pro :: Fails To Boot Properly After EFI Firmware 27 Update

Apr 16, 2012

I have a strange boot issue having (tried) to install EFI 2.7 update.When I restart the laptop, it 'chimes', displays a grey screen, then chimes, displays a grey screen, forever. I hit the bower (off) button for 5 secs or thereabouts, and restart, same thing. I do this 4 times and finally it reboots.But the EFI update still appears as needing to be installed (software update tells me it is not installed). Update history shows however that it IS installed.I can go through this process any number of times. I now have Software Update history showing quite a few installs opf the EFI 2.7 update.If I just do a restart without installing, I also go through the same fail to restart / fail to start / ... / eventually restart sequence.

So it seems now that the laptop will only start after 4 failed restarts and finally it starts. After starting it all appears to be perfectly fine.Nothing strange in the console logs that I can see.The failed reboots don't seem to register in the console logs - I suspect that the failure to restart is pretty early on in the boot sequence, well before it tries to load any semblance of the OSX kernel. It is almost as if it is trying to boot from someplace other than the disk ... until eventually it gives up and tries the disk. (I have tried booting with and without network cable - no difference) I don't know enough about mac bootup sequences to know if there is some config/setting that is screwed up causing this odd behaviour.

Info:
MacBook (13-inch Mid 2010), Mac OS X (10.7.3)

View 5 Replies View Related

Mac Mini :: After Last Update Wired Keyboard Fails - No Longer Responds

Apr 2, 2012

I have a Mac mini (~2008) running Snow Leopard.I updated my software today (haven't done this in probably several months) and immediately afterword, my Apple aluminum wired keyboard no longer responds. (The mouse when attached through the keyboard also no longer responds.)However, the keyboard still functions just fine on a separate MacBook Pro that I have, it just won't work on the Mac Mini. (I tried different USB ports with no difference.)

I wasn't smart enough to write down what upgrades actually occurred prior to my last update, but there were only 4 items (I think one was Safari, one was iTunes).If there are no better ideas, I guess I will have to try a system restore from Time Machine which predates my latest bad "update". I'd rather not have to go there if I don't have to.

View 6 Replies View Related

OS X V10.7 Lion :: New Update (6-11-2013) Fails On System And Got A Blank Screen

Jun 11, 2012

I just tried to update my system to the latest update release on 6-11-2012 and it fails and got stuck to a blanck screen. When I try to reboot the system I get an "unable to find driver for this platform" "ACPI".

Info:
MacBook Pro, Mac OS X (10.7.2)

View 4 Replies View Related

Intel Mac :: It Fails To Startup

Feb 18, 2012

My iMac starts than it stays a white screen with a question mark in a box.

Info:iMac, Mac OS X (10.6)

View 1 Replies View Related

Intel Mac :: WiFi Fails After 10.7.4

Jun 17, 2012

After install the 10.7.4 I loose the WiFi-Conntect sometimes. Even after a reebot the sign for the WiFi-Connection is greyed and I have to choose the connection. I tried the Combo, but the problem is the same.

iMac 27" Mid 2011

3,1 GHz i5

16 GB

HD6970M 1GB

SSD

Connect via 5GHZ with Time Capsule 4G,My other devices (iPhone, iPad) didn't loose any connect.

Info:iMac, Mac OS X (10.7.4), SSD

View 4 Replies View Related

Intel Mac :: SuperDrive Fails When Burning Dvd's

May 18, 2012

This has been happening consistently when I try to burn DVD's, during this time the drive stalls and I am not able to eject. (Possibly because software is trying to write with faulty hardware maybe?) The error message changes if I try to burn DL DVD 's. Also CD's often fail while burning some do complete. Errors also occur with Final Cut Pro, Adobe Premiere CS5 and DVD Studio Pro.  

Info:
iMac, Mac OS X (10.6.8)

View 2 Replies View Related

Intel Mac :: It Fails To Recognize Any Printer That Try To Setup?

May 28, 2012

a few days ago my printer would not print, and print request went to queue have tried to update and/or re-enter software withoust success?

Info:
iMac, Mac OS X (10.6.8)

View 2 Replies View Related

Mac Mini :: Intel Headphone Jack Fails Intermittently

Mar 26, 2007

My headphone jack fails intermittently. I have speakers hooked up to it and sometimes sound will not play through the speakers. Even if I disconnect the speakers and plug in headphone sound does still not play through the headphones. I have even tried restarting and that does not work. In my system preferences (In Sound Panel) it shows that something is connected to the headphone jack. I have already had the entire logic board replaced once (under warranty) and that seemed to fix the problem for a couple months. If I wait about a day or less magically the speakers start working again. This has happend twice. Has anyone else had this problem? I have about 2 weeks left on my warranty. It almost seems like it is a software problem now, but I am not sure.

View 4 Replies View Related

IMac (Intel) :: Restoring Fails Repeatedly - OS X Mavericks 10.9.3

Jul 1, 2014

Every time my iMac restarts or boots up, it brings me to the OS X installer page since last night.

I have done the disk utility check and my hard drive is ok. I then tried restoring from network which stops half way and reboot. I have also tried restoring from Time Machine but it has also stopped and rebooted several times.

My iMac is currently running OS 10.9.3

21.5-inch iMac With the following configuration:

2.5GHz Quad-Core Intel Core i5

4GB 1333MHz DDR3 SDRAM - 2x2GB

500GB Serial ATA Drive

AMD Radeon HD 6750M 512MB GDDR5

View 8 Replies View Related

Intel Mac :: Normal Time Machine Backup To External Fails?

Mar 15, 2012

i checked disk utility and no errors. the external is not full.

Info:
Imac 24, Mac OS X (10.5.8), Wacom Tablet , Lacie 2T HD, Lacie 500gHD

View 5 Replies View Related

IMac (Intel) :: Burning Homemade Films Onto DVD Fails / Crashes

Sep 11, 2014

Sometimes when burning homemade films on to dvd it fails / crashes ...

Info:
iMac, iOS 7.0.1

View 1 Replies View Related

IMac (Intel) :: DVD Drive Fails To Recognize Disk Inserted

Aug 23, 2014

I have a mid-2010 iMac.  Recently, it has failed to mount DVDs, either video or data, on a reliable basis.  I have been able to work around it by restarting my iMac, but that doesn't always work.

Info:
iMac, OS X Mavericks (10.9.4), mid-2010 model

View 3 Replies View Related

Intel Mac :: Screen Goes Black For Short Periods And Increase The Time It Fails?

Jul 4, 2012

imac screen goes black 27, still works but the screen goes black for short periods and increase the time it fails. Info: iMac (27-inch Mid 2011), Mac OS X (10.6.8), IS iMac (27-inch, Mid 2010)

View 6 Replies View Related

OS X :: Filling Out PDF Forms?

Apr 14, 2007

my Dad has to fill out some forms and they are available online in PDF format. He can edit them in Safari, but once we save the forms we are unable to edit them. The weird thing is when I first save it I could edit it, but once I saved it again it wouldn't let me change anything. This is very strange, I've tried Preview and Adobe Reader.

View 3 Replies View Related

OS X :: Filling Out Pdf Forms In Preview

Feb 10, 2008

I downloaded the latest tax forms from the IRS in pdf form, and filled out all my tax information using preview. When I finished, I saved the form, but all the data I entered was lost. Can you not fill out pdf forms in preview? I did find a workaround. I filled in some data, then "printed" to a pdf file, and that saved all the entered data. Any insight into this issue?

View 7 Replies View Related

OS X :: Add Text To Forms In Preview?

May 27, 2009

My employer sent me a form in .pdf form to fill out and send back. How can I fill out the form in Preview and send it back instead of having to print, complete, scan and re-send the form?

View 3 Replies View Related

OS X :: Websites Won't Accept Forms When Using Safari?

Sep 24, 2010

Today (in the latest version of Safari, of course) I repeatedly tried to fill out a captcha form, and later a password form on different website. Both forms went through fine in Firefox. Is this a common problem or will I have to experiment with deleting preferences, etc.?

Also: I tried a login at another website, which worked fine. But the captcha and the other password form refuse to work.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved