Intel Mac :: SuperDrive Fails When Burning Dvd's
May 18, 2012
This has been happening consistently when I try to burn DVD's, during this time the drive stalls and I am not able to eject. (Possibly because software is trying to write with faulty hardware maybe?) The error message changes if I try to burn DL DVD 's. Also CD's often fail while burning some do complete. Errors also occur with Final Cut Pro, Adobe Premiere CS5 and DVD Studio Pro. Â
Info:
iMac, Mac OS X (10.6.8)
View 2 Replies
ADVERTISEMENT
Sep 11, 2014
Sometimes when burning homemade films on to dvd it fails / crashes ...
Info:
iMac, iOS 7.0.1
View 1 Replies
View Related
Jun 21, 2012
I tried variety of CD-R's (Verbatim, Memolex, Maxell, Office Deipot brand, etc) . Sometimes Memolex works with very low speed (2X), but most of times fails with other brands.
What I saw is that iTunes prepared songs successfully but after start burning progress bar didn't move at all (for tens of minutes) and looked waiting for response from CD-R devices.Â
I tried with 2 machines below.
1. Mac mini (Intel Core 2 Duo 2GHz, 1GB memory) with PIONEER DVD-RW DVR-K06RS: (replaced from factory part), OS 10.5.8
2. Macbook (Intel Core 2 Duo 2GHz, 2GB memory) with HL-DT-ST DVDRW GS21N (LG?) (Apple shipping device), OS10.5.8Â
iTunes version is 10.6.3.Â
Info:
Mac mini, Mac OS X (10.5.8)
View 2 Replies
View Related
Sep 30, 2008
iMac, Core Duo, 17-inch, 2 GHz
Boot ROM Version:IM41.0055.B08
The MATSHITA DVD-R UJ-846 can't mount disks, both CD and DVD, about 90 percent of the time. I've tried resetting the PRAM, but I don't know if it's related to this.
View 2 Replies
View Related
Oct 29, 2007
I have an external Superdrive that isn't burning. It will spin it's wheels for hours on end and make me a new coaster. I returned it to the place of purchase, a business I have dealt with on good terms for years. They tested it, gave me a call and said it was burning files just fine on their computer.
But it isn't on mine. The computer recognizes that the drive is there and that it is capable of burning DVD and CD.
View 2 Replies
View Related
Apr 9, 2008
all of a sudden a little while ago (after some apple update, don't remember which tbo) i cannot burn any media, well, 98% of the time.. It starts up and then instnaly goes to finishing burn, and spits it out with a "fail burn because of a medium write error". This happens with 2 brans of media i have, both of which worked flawlessly before, and popcorn, toast as well as trying disc utility. i need to burn dvds for work and so on, but can no longer.
View 24 Replies
View Related
Jan 15, 2010
I have been using Titanium to burn DVD's. It usually takes about the length of the actually DVD to finish the burning process. Is this normal length or is there a faster program for burning DVD
View 2 Replies
View Related
Feb 18, 2012
My iMac starts than it stays a white screen with a question mark in a box.
Info:iMac, Mac OS X (10.6)
View 1 Replies
View Related
Jun 17, 2012
After install the 10.7.4 I loose the WiFi-Conntect sometimes. Even after a reebot the sign for the WiFi-Connection is greyed and I have to choose the connection. I tried the Combo, but the problem is the same.
iMac 27" Mid 2011
3,1 GHz i5
16 GB
HD6970M 1GB
SSD
Connect via 5GHZ with Time Capsule 4G ,My other devices (iPhone, iPad) didn't loose any connect.
Info:iMac, Mac OS X (10.7.4), SSD
View 4 Replies
View Related
Mar 18, 2012
How do I burn multiple movies on to one / the same DVD when using Compressor 4?
Info:
iMac
View 1 Replies
View Related
May 7, 2012
Which is best for burning an imovie on an imac, 10.6.8Â ...dvd-r or dvd+r
Info:
Mac OS X (10.6.8)
View 1 Replies
View Related
Mar 18, 2012
Whenever I click on the Apple logo and Software Update, the progress bar gets to about 20% in 3 or 4 seconds and then never moves again. I've left it for over an hour, no change. If I go to Boot Camp Assistant and try to Download the latest Windows support software from Apple, it gets to about 5% in 3 or 4 seconds and then never moves again. I can download from the web and other internet based services work. I am running Lion 10.7.3 on a 2011 iMac. I've tried creating a new user. I've also tried starting in Safe Mode. I have reinstalled Lion. No change.Â
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.3)
View 4 Replies
View Related
Apr 22, 2012
Since I upgraded my Intel IMac to a 2tb drive I've been getting the software update telling me there are two updates to load (involving a restart) the download works and the instalation appears to be normal until the restart when the system tells me the install failed. Anybody getting the same problem?
Info:
iMac (20-inch Early 2006), Mac OS X (10.6.8)
View 2 Replies
View Related
May 28, 2012
a few days ago my printer would not print, and print request went to queue have tried to update and/or re-enter software withoust success?
Info:
iMac, Mac OS X (10.6.8)
View 2 Replies
View Related
May 16, 2012
Does anyone know a quick way how to copy pre-recorded/purchased DVD's to my iMac's hard drive, so I can watch via my Apple TV? In the past I've inserted the DVD and it's appeared on the desktop, I then choose to copy it, and managed to paste it into iTunes, but it takes at least an hour to copy to the hard drive. Any ideas? I've tried Mac the ripper, but wasn't sure how to get that to work,
Info:
iMac, Mac OS X (10.7.2), iPod Touch 64GB 3rd gen, iPad (1)
View 1 Replies
View Related
Mar 26, 2007
My headphone jack fails intermittently. I have speakers hooked up to it and sometimes sound will not play through the speakers. Even if I disconnect the speakers and plug in headphone sound does still not play through the headphones. I have even tried restarting and that does not work. In my system preferences (In Sound Panel) it shows that something is connected to the headphone jack. I have already had the entire logic board replaced once (under warranty) and that seemed to fix the problem for a couple months. If I wait about a day or less magically the speakers start working again. This has happend twice. Has anyone else had this problem? I have about 2 weeks left on my warranty. It almost seems like it is a software problem now, but I am not sure.
View 4 Replies
View Related
Jul 1, 2014
Every time my iMac restarts or boots up, it brings me to the OS X installer page since last night.
I have done the disk utility check and my hard drive is ok. I then tried restoring from network which stops half way and reboot. I have also tried restoring from Time Machine but it has also stopped and rebooted several times.
My iMac is currently running OS 10.9.3
21.5-inch iMac With the following configuration:
2.5GHz Quad-Core Intel Core i5
4GB 1333MHz DDR3 SDRAM - 2x2GB
500GB Serial ATA Drive
AMD Radeon HD 6750M 512MB GDDR5
View 8 Replies
View Related
Feb 12, 2012
The internal SuperDrive has a big demage and needs to get replaced by a new device. The replacement is to expensive. Therefore I bought an externalisier drive. But how can I deactivate the SuperDrive by Software?Â
Info:
ibook G4, iMAC2,16GHz Core2Duo, 2GB DDR2 667 MHz, NAS 1 TB HDD, Mac OS X (10.6.4), iPhone 3GS 16 GB, Apple TV
View 3 Replies
View Related
May 20, 2012
MATSHITA DVD-R  UJ-85J: Superdrive won't accept CD or DVD keeps spitting back out - alas 1000's of iMacs with this superdrive have had the SAME problem from what I have read elsewhere. Apple should replace for free or discount for us out of warranty [URL]
View 3 Replies
View Related
May 30, 2012
I'm having issues with the computer, among which is that the superdrive will not accept any disks... it clicks a couple of times, then spits the disk out. This has been an intermittent problem for about 5 months, but now it seems to be constant. Disk Utility and Disk Warrior (hard drive based) say that I have problems that can only be fixed by restarting with a system disk or DW disk inserted.
I did do the System Management Controller reset but it didn't work. I'll take the computer to an apple store if need be, but is there any way to force a disk to be accepted and read? Also, since I bought Lion via the app store, and have no system disk. Is there a way to fix my hard drive without a physical system or repair disk? I do have the physical disk for Leopard if that would work on Lion. I can't get a CD or DVD to stay in the drive and be read.
Info:
iMac, Mac OS X (10.7.3)
View 1 Replies
View Related
Apr 10, 2012
Is it ready for replacement and can the burner be ordered n replaced at residence with a guide? Have burned about 400 cd"s thus far
Info:
iMac, Mac OS X (10.6.8)
View 1 Replies
View Related
Apr 20, 2012
i have just started to get the error code 0x80020063 after burning dvd saying disc can not be burned and spits cd out of my mac
put it in the pc the disk is named and content is there put disk in mac it cant be seen anny clue to what is going on and how to fix it
Info:
iphoto 09, Mac OS X (10.6.4)
View 1 Replies
View Related
May 12, 2012
I was wondering if there is away to burn full programs thats on my imac. I want to burn them to a cd for a backup just incase I need to reinstall I dont have to go and download them again. Need to burn them off the iMac and make them a full install cd.
Info:
iMac, Mac OS X (10.7.4)
View 6 Replies
View Related
Aug 30, 2014
I am trying to burn movies from iPhoto to a dvd for backup. I have attempted to do the export to another file method, then burn to DVD, but whenever I try the export, I get a list of 20 video files that were not exported. This is the only method I have been able to find that is supposed to work for getting movies out of iphoto and onto a disc.Â
View 4 Replies
View Related
Mar 15, 2012
i checked disk utility and no errors. the external is not full.
Info:
Imac 24, Mac OS X (10.5.8), Wacom Tablet , Lacie 2T HD, Lacie 500gHD
View 5 Replies
View Related
Aug 23, 2014
I have a mid-2010 iMac. Recently, it has failed to mount DVDs, either video or data, on a reliable basis. I have been able to work around it by restarting my iMac, but that doesn't always work.
Info:
iMac, OS X Mavericks (10.9.4), mid-2010 model
View 3 Replies
View Related
Mar 26, 2012
I have an iMac now powered by OS X Lion. But the problem is that when I try to insert a disk the superdrive accepts it but it doesn't show in the desktop. And after 30 seconds the disk is automatically ejected. I have tried restarting the PC a lot of time. The problem persists with all cds and dvds.
Info:
iMac, Mac OS X (10.7.3)
View 5 Replies
View Related
May 20, 2012
I am getting tired of popping in DVDs in my drives (of six Macs in my house) only to find out that I have the wrong region. Is there a quick way (other than a 3x5 card and a pencil) to see the current region? I don't think I can check in system prefs.
Info:
iMac, Mac OS X (10.7.4)
View 4 Replies
View Related
Nov 30, 2014
the external SuperDrive on my iMAC does not read some of my music CDs. While the majority runs without any problems, quite a few cannot be read, although they work without any problems on my HiFi and on other CD Drives. All Software is up to date and the Drive is just a few months old.
Info:
iMac, OS X Yosemite (10.10.1)
View 3 Replies
View Related
Jul 4, 2012
imac screen goes black 27, still works but the screen goes black for short periods and increase the time it fails. Info: iMac (27-inch Mid 2011), Mac OS X (10.6.8), IS iMac (27-inch, Mid 2010)
View 6 Replies
View Related