Just updated to OS Lion and upon reboot after install it froze. How do I restart without doing a hard shutdown/restart? I have never encountered a freeze with any apple product, what gives.
Info:
iMac, Mac OS X (10.6.7)
Can I reboot my iMac running ox 10.9.4 using my Snow Leopard install disc?
Info:
iMac, OS X Mavericks (10.9.4)
System 10.3.9 working without problem ... until...pointer freezes up.
Re-start helps, but only briefly, until another freeze-up.
Tried using another mouse, connected to my USB port.
(Usually, and without problem, I use a wireless LogiTech mouse.)
How to reboot 64 to 32 bits Lion?
Info:
iMac, Mac OS X (10.7.3)
Recently my 13 inch MBP has been freezing a lot. It seems similar to the 1.7 firmware problem many are reporting, but from what I can tell from their posts the freezing only lasts 15-30 seconds then they can work again. On my computer the freezing does not stop and I am forced to hold the power button to shutdown every time. When I attempt to reboot the computer after that I have to reset the PRAM every time.
I am using a 3rd party hard drive that worked fine up until a little less than a week ago, and also worked fine in my old plastic white macbook. When I put the stock hard drive back in it seems to work fine, but I admittedly haven't used it as extensively and not all of my apps are installed, but most of my freezing occurs in safari as well sometimes itunes.If anyone knows how to downgrade firmware back to 1.6 I would try that as well, but I am not sure if that is possible.
I have an iMac G5 OS 10. that froze up while surfing the net using Firefox. I shut it down and tried to reboot. It chimes and comes up with the gray screen with the Apple logo, but will not proceed beyond that. The fan kicks in and will not proceed.
View 1 Replies View RelatedI have a 17" iMac G4 that I was rung Tiger with, then I installed Leopard 10.5. I use this as a second computer. All is fine except that my Epson scanner does not work with 10.5. I've tried the latest drivers. I'd like to reinstall Tiger. I used the 10.5 disc to reformat the drive and start from square one. When I boot from my original Tiger disc it starts opening it's windows, but when I get to the point where I can choose Install or use Disk Utility to reformat from the Tiger disc, all windows freeze and I need to hard reboot from the power switch. Am I correct to assume that 10.5 won't let 10.4 to reinstall. Is this correct?
View 5 Replies View RelatedI was using my Mac (Macbook Pro 15" screen) and tried opening a file in GarageBand, at which point a warning message came up saying something about a midi file and something not being allowed, and then froze, resulting in me having to switch the computer off from the power button and restarting (Sadly I didnt realise that this would be the start of a whole host of problems and didnt make a note of the warning message). After rebooting I got the 'stuck on the blue screen with the Apple logo and infinitly spinning wheel' problem that i've seen in a few posts. having tried numerous suggestions posted with no change I ended up taking it to the genius section of an Apple store. When i got it back they said that it may have been a corrupted file, and that they re-installed and reset the starting programs (Something along those lines, I cant quite remember). I can now get onto the computer and use it, though some new problems have arisen.......
View 1 Replies View RelatedJust as an experiment I have been trying to get the Mac OS to work on PC. I have downloaded several versions of iatkos and it works fine until the end where the computer is supposed to re-boot under Mac OS. It just sits there can anyone tell me what I am doing wrong, it looks like a good experiment, graphics look ok and it would provide a mate for my mac pro. Need some direction as I have tried 3 computers 6 downloads and no success.
View 3 Replies View RelatedChanged to lion and imac freezes often coming from sleep. what can i do?
Info:
iMac (21.5-inch Late 2009), Mac OS X (10.7.3)
How do I get my computer started so I can trouble shoot. Freezes during startup on Firefox begins loading!
Info:
iMac
After putting my MacBook Pro to sleep or rebooting, the mouse does not work anymore. I can move the mouse pointer, but can't left-click.
It seems as OS X senses a "left mouse button pressed" condition the whole time, when I wake the MacBook an move the pointer, I continuously draw selections on the screen, as if I pressed the left button and moved the pointer.
The only thing that helps is a Cmd + alt + P + R reboot, then the funtionality is fully restored, but after putting it to sleep or rebooting normally, the problem's back everytime. It's not a trackpad issue, connecting a USB mouse results in the same symptoms. I also did an SMC reset (removed battery and pressed power button 5 sec) I travel a lot with my MAcBook and have to do a hard reboot everytime when using it.
Info:
MacBook Pro, Mac OS X (10.7.4), Late 2008 MBP 2,53 Ghz
This worked before and now it doesn't! I either a hal.dll or ntoskrnl.exe error. This was working perfectly on one 500G HD which OS X does not reside on (OS X is on a 80Gb SSD).
1. 150Gb Windows 7 x64
2. 80Gb Windows XP x32
3. HFS formatted for storage of OS X things.
Now whichever way I install or partition it XP refuses to install after the first reboot (after it's copied files over). Now I've spent TWO days on this now and still no closer to fixing it. Windows 7 boots and works fine, XP refuses to install even if it's the only thing on the disk!
Where can I download it from? Or what else to do?
Info:
MacBook Air, Mac OS X (10.6.4)
I made a clean install of Snow Leopard and now I'm slowly installing all my apps. I had Undercover running on Leopard and I installed it again. After the reboot, a pop up asked my the same question as an iPhone asks"uc" would like to use your current location.
View 5 Replies View RelatedI just bought Lioin for my iMac, when I was told by Applecare to purchase it so I could upgrade to iCloud, she said the same license will work for up to 3 or 4 other Macs with the same ID. I just have one (my MacBook Pro) but don't know how to download without getting charged for another license.Â
Info:
iMac (27-inch Late 2009), Mac OS X (10.7.4)
Can CS3 be installed on:Â Dual 867 Mhz G4 PPC with 2GB RAM and runing 10.4.11Â Mac Pro Intel with 10GB RAM and running 10.7.4Â Mostly wanting to use Illustrator & Photoshop from the suite to at least:Â
1. Edit Illustrator 9 files and PS files created with various older versions of Photoshop that came free with scanners such as Photoshop 5 LE.Â
2. Use the older Mac as a scanning station with scanners that use TWAIN so as not tie up the Mac Pro.Â
Info:
Mac Pro, Mac OS X (10.7.3)
I was installing leopard and cannot get mac to reboot
Info:
iMac
Often, when I just put my Mac to sleep, when I wake it up, videos won't play.I have reinstalled Flash, but it still happens.Seems only to happen since the last upgrade to Mac OS X 10.7.3 Lion (11D50b)(Processor 3.2 GHz Intel Core i3 4GB 1333 MHz Ram)
Info:
iMac, Mac OS X (10.7.3)
I have a mid 07 iMac that I just upgraded the memory in and now it wont reboot. I had two 1 gig and switched to two 2 gigs. I can replace one of the 2 gigs with one of the original 1 gigs and it will start and shows in "about this mac" that I have 3 gigs??? Then take the 1 gig back out replace with the other new 2 gig and wont reboot again. Â
Info:
iMac, Mac OS X (10.7.4), Mid 20007
I purchased Lion from the App Store, and in the 'Purchases'tab, it shows status as 'Installed'.But in About this Mac on the Apple logo, it continues to show the OS as 10.6.8.
Info:
iMac, Mac OS X (10.7)
I have an ibook Power pc g4 with 1.25gig of ram and 10.3.9 os.
I want to change the os to Leopard 10.5 and can get as far as clicking on the icon to install...waiting for the machine to reboot ...and that is all I do....WAIT
The machine shows a spinning wheel and clunks and clicks while the disk is being read.
after 20 minutes of this all goes quite but the little spinning wheel keeps spinning..
I have tried to hold down the c key the option key and just did a plain old reboot with the disk in the drive..
My iMac (10.6.8) goes to sleep after 2 or 3 hours (even if im working at the time) and will not wake up without a hard reboot.Â
Info:
iMac, Mac OS X (10.6.8)
I have a 6 month old iMac (bought Dec 2011). It has 10.6.8 with all patches. It began to randomly shut down and got stuck in the reboot loop (sometimes, the problem was a reawakening after sleep, but even a simple shutdown/restart wouldnt guarantee correct behavior).Â
I did the Apple Hardware Test (it reported - no troubles found), reset the SMC, PRAM - all to no avail.Â
Finally, i reinstalled the OS from the DVD that came along with the iMac. Left it for a few hours to download the "jumbo" patch from apple site, and now it is back to behaving the same way - it is stuck in a reboot loop! I dont know if it installed the patch or not, as soon as i touched any key to wake up the iMac, it rebooted (like before). And now I gotta try the boot process like 15 times and it may boot correctly. Safe Mode boot is also not guaranteed to work. It shows the sliding bar and then back to reboot!Â
If it were a software issue, the reinstall of the OS should have fixed that? If it were a hardware issue, the AHT should have caught that? Am I stuck with a lemon? Just one of those bad pieces that are inevitable in any assembly line production?Â
Info:
iMac, Mac OS X (10.6.8)
i've downloaded lion from the App-Store.After the download the installer startet automaticly and reboot the System.The problem is, that the installer starts after the first reboot and failed with no error and shutdown the system.After restart the MacBook Pro, the system reboots during the installation anymore,
Info:
MacBook Pro, Mac OS X (10.6.8)
Lion recovery update from the software update won't install. Keeps spooling (I think that is the word for the updaet never seems to finish updating). I usually have to ignore the update...but why won't my iMac accept the update? I am running Lion 10.7.3 on a late 2009 iMac 4gb memory, 3.06 GHz Intel Core 2 Duo.
Info:
iMac, Mac OS X (10.7.3), Late'09 3.06 GHz Core 2 Duo 4 GB M.
I'm using Lion and I can't run some of my powerpc programs. Want to install tiger on a partition (Extended Journaled type) made on Lion using Disk Utility, my only question here is: Will it work if I've burned on a DVD the installer of Mac OS X 10.4 Tiger Install DVD (PPC) and then run the instalation and trigger it to this partition? Or if this is not the proper way, which is it? I would really love to have both OS on my iMac 24-in Intel Core 2 Duo mid 2007.
I've read that newer macs won't accept this procedure I'm trying to pull out, but my actual iMac (2007) came with Tiger installed on it, but the install disk is lost, tried to find it but I never could.
Info:
iMac (24-inch Mid 2007), Mac OS X (10.4), Mac OS X (10.7.3)
I am trying to install OSX Lion onto my Late 2009 iMac 27" computer. I download it from the App Store and install it via the installer.The computer restarts itself and finishes installing, then once it restarts again it boots back into OSX 10.7.4. No errors or problems, just never follows through on install once completed.
View 1 Replies View RelatedIt hangs on a grey screen, and I have to press the power button to restart again.
Info:
3.06GHz Intel Core 2 Duo 24-inch iMac, Mac OS X (10.7.1), Phone: iPhone 4 Camera: Canon SD990
Anyone know what this rotating icon belongs to? And why does it continue to come onto my screen periodically and stay there until I reboot? Just to return again at a later time?
Info:
iMac, Mac OS X (10.7.4), iMac 27" Intel (2009)
