Hardware :: Drive Has A Hardware Problem That Cannot Be Repaired?
Jan 13, 2010
I have 4 drives in my Mac Pro...in bay 2, I have a Western Digital 750 gb drive I got just about 3 years ago.The drive has been slightly problematic lately...like I'll be browsing through Finder and I'll get an error when going into certain folders...my iTunes library is on the drive and lately songs have been skipping etc.
I looked in disk utility just now and it says "the drive has a hardware problem that cannot be repaired" and says S.M.A.R.T. status failed.I don't mind replacing the drive, EXCEPT...I previously had a raptor in this same bay and the raptor failed a few months ago after a couple years in service. I tried moving the raptor to another bay, also tried it in an enclosure- nothing- the raptor died.
Is it possible this particular bay is causing problems, or no, there is no way a particular bay can be causing hard drives to fail? Like the bay can't be sending too much voltage or whatever (I have no idea)? Is it just pure coincidence that two drives in the same bay failed (first the raptor, then this one I moved into bay 2)?
View 6 Replies
ADVERTISEMENT
Jun 20, 2012
I cannot see my external hard drive. I cannot see it in finder. When I started disk utility it says I need to repair but than it says it cannot be repaired. Is there a way I can reach the data? I don't know what happened to the disk.
Info:
iPad, iOS 5.1
View 1 Replies
View Related
Jun 27, 2012
Had to "repair" my Hard drive afterward computor boots but won't recognize my usual pasword what to do_know Password is correct
View 1 Replies
View Related
Apr 19, 2012
I have an iMac 21.5 inch and snow leopard version 10.6.8. I have done nothing different to my mac and I don't know why this problem has occured. I just use it for photo editing in Photoshop and browsing online...the usual! I've heard that the only option is backing up everything from my mac and starting again completely- is this really the case?I ran out yesterday to spend £84 on an external hard drive because my last one was full up, and I'm a student...I can't keep affording loads of money, especially considering the mac cost me so much already!
Info:
Imac
View 6 Replies
View Related
Apr 19, 2010
My old iMac G4 (running OS 10.4) has been running sluggishly with sporadic freezes & "spinning pizzas" for several months. I launched Disk Utility which displayed the following message "SMART: failing". I attempted to restart the iMac but it would freeze immediately after the "gong". I was, however, able to restart from the install CD. I attempted to run Repair Permissions which froze. I ran Repair Disk which reported that "volume cannot be repaired because of an error". I restarted from the Disk Warrior CD. The hardware test indicated that "the built-in SMART indicated everything is normal".Is this all indicative of an internal drive that is behaving unpredictably & about to die?
View 7 Replies
View Related
Jan 11, 2010
I have a G5 running Leopard that I have a 2nd hard drive on. It had b-tree node issues, but now Disk Warrior says "the directory cannot be rebuilt, original too severely damaged, error code 2156,-57. The volume wrapper is damaged and needs to be repaired." Disk Warrior doesn't seem to fix it, how I can get my data back?
View 1 Replies
View Related
Mar 27, 2010
When repairing permissions on a G4 iBook with OS 105.8, I find about 8 files that contain the above message and one that contains the message "ACL found but not expected in the Application / Utilities". What does this mean and how are these corrected?
View 2 Replies
View Related
Oct 8, 2010
How and where do you get Apple Computers repaired after Applecare has run out, and what sort of costs would be involved. Only asking because I have equipment that it has run out on and the wife wants the box/boxes gotten rid off....
View 4 Replies
View Related
Jun 6, 2008
I'm not really sure what to do or what exactly is wrong. I'm hoping not to reboot or reinstall all together, but if I have to... I suppose there's no choice. I tried 'Verify Disk' from the utilities, but is fails and says
Invalid volume file count
(It should be 712836 instead of 712840)
Invalid volume directory count
(It should be 171417 instead of 171413)
The volume Macintosh HD needs to be repaired.
Error: Filesystem verify or repair failed.
I tried doing a 'Repair Disk' from the installation CD, but it says it fails because it could not unmount the HD.
View 15 Replies
View Related
Apr 1, 2009
Lately I've noticed that when I repair permissions, it's the same files that keep appearing the log of files being "repaired"... which leads me to believe they're not actually being repaired at all.
It's at the point where I can repair permissions once, generating a log of repaired files, and then if I repair permissions again immediately afterwards (whether I've closed and reopened Disk Utility in the mean time or not), the same exact list of files appears as being repaired.
View 2 Replies
View Related
Feb 14, 2010
I've been meaning to ask this for some time. When I repair my disk permissions I get the following warning: "Warning - SUID file 'System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAgent' has been modified and will not be repaired". What does it mean? Why isn't it being repaired?
View 4 Replies
View Related
Mar 11, 2012
Since a week or 3 my Imac is bleeping whenever the harddisk is put to work. Before this it was impossible to make a time machine copy, it would hang at a certain point. I recently did a disk utility scan which could not be finished (aborted by the system) as it was saying (translated from Dutch):
"Volume-information being checked Wrong amount of free blocks on this volume (Has to be 38684126 in stead of 38684119)The volume 'Macintosh HD' is damaged and need to be repaired.Error: this disk needs to be repaired. Restart system with another disk (like Mac OS X-installdisk) and use disk utility to repair this disk."
So I put the installdisk 1 in, but the Imac spits it out, refuses to start up in harddisk repair mode or any other mode at all. It just spits it out and starts as usual. Install disk 2 it doesnt spit out, but I can only open a read me file. Like said, the Imac works fine, except that it is guided by literaly hundreds of beeps in high and low, short and long. I feel like being at a supermarket having my items scanned. That is what it sounds like. It is quite vocal but annoying and seem to multiply every day. In the beginning it only did at start up just a few beeps, then it got more, and now it beeps also in sleep mode.
I cannot do a disk repair, also not with the latest OS X update (snowleopard, since Lion is not working on my 1GB drive). I do notice though that the difference in this error code is getting bigger, it used to be just one block difference, now it is 7.
Also I took the memory modules out yesterday and put them back in, as I heard this can also help get rid of the beeps. It did not solve anything at all.I can't find anything on this problem on internet, because all beep related topics are about the error codes for the RAM drives. These are not the same sounds. Another attempt was to install the cms program to avoid overheating fans. Also no improvement.
Info:
iMac, Mac OS X (10.6.8)
View 10 Replies
View Related
May 12, 2012
After 10.7.4, now disc wont repair / verify.
Info:
Mac Pro
View 14 Replies
View Related
Mar 14, 2009
After the latest update of front row and itunes my mac started to go quite slow.
so i repaired the permissions and turned up loads of errors with those two and iphoto. anyway i thought it was all good, but it didnt get any faster. Every time i try to run repair permissions the same problems keep arising.
View 3 Replies
View Related
Apr 24, 2012
On one of our MacBook Pros (Late-2011), running the latest OS X 10.7.3, Disk Utility says the volume needs to be repaired. When I use Disk Utility from the Recovery HD, it says the volume appears to be OK. I verified by using fsck in single-user mode, and it found no problems either. Which do I believe? Is this a sign of a soon-to-fail hard drive?
View 9 Replies
View Related
May 21, 2012
I already repaired the rights on the disk. Mac does not drive down, obviously after certain programs have been started. One of those programs is itunes. I have to use the power switch button for switching it off. Mac can be driven down normally immediately after start-up.
Info:
MacBook Pro, Mac OS X (10.6.8)
View 14 Replies
View Related
Jul 4, 2012
My mac os x 10.5.8 has been acting very wierd. The other days after restarting it, it would not go past the apple/grey screen. Then i retried while holding (i believe commn, alt, p &R) and it worked. Howevere, my mac has been acting very badly/freezing. I just ran "verify disk" and got the message "first aid failed... the volume Macintosh needs to be repaired".
So sicne i figure i should back everything up on my time machine, i just got an error message from time machine saying that it has failed as well. i also do not have my mac osx install disk with me as i moved and it is overseas
Info:
Mac OS X (10.5.2)
View 14 Replies
View Related
Jul 1, 2014
when using OnyX or Disk First Aid, a message states to restart the computer, holding Command-R and to repair my disk.Every single time, the disk turns out to be OK.
Question 1: Is this a false reading, or is the disk actually being fixed by the Control-R combination?
Question 2: If it is NOT a false reading, since my programs don't crash and I always shut down properly, what could cause the errors?
Macbook Pro 13, 10.9.4, 4GB RAM
View 5 Replies
View Related
Sep 2, 2014
How can I backup my Mac when it stop working and I can't repair it?
View 1 Replies
View Related
May 11, 2010
I've searched google for a solution to this and I came across some and followed the instructions (reset safari, clear cache, run onyx, repair permissions). It works... for about two hours, then safari is back to lagging like crazy. I'm using a late 2008 MacBook Pro with Snow Leopard and all the latest software updates.
View 6 Replies
View Related
Jun 30, 2012
I've used the disk repair utility and repaired successfully. My book is still frozen at the logo and spinning cog. I have to hit the power button to shut down - And the hard drive gets super heated. What else to do?
Info:
MacBook
Pro, Mac OS X
(10.6.2)
View 1 Replies
View Related
Jun 30, 2014
My computer had a spinning wheel yesterday that would not go away, so I forced a shutdown (had done it before with no problems). However, now my computer goes straight to the diagnostic tool, and when I try to repair disk0s2, it cannot be repaired. I didn't have Time Machine automatically running, and my most recent backup is too old and I don't want to lose all of our pictures. is there any other way to recover files off of this disk?
View 1 Replies
View Related
Mar 20, 2009
I've repaired my permissions via OS restore disc...and Drive Genius...and whenever I repair...I never get a "clean" repair log? Any ideas>>
View 1 Replies
View Related
May 21, 2009
My iMac was in the middle of burning a CD on Sunday and spat it out halfway through. Next it was spitting every disc out, including the OS disk at firmware. Anyway, Applecare confirmed the superdrive needed replaced. The machine is only just over a month old (but it is the old top end 3.06GHz model)! So, it went off for repair in perfect order, all packaged up in the original packaging. Based on the advice on others, I also took many photographs before I dropped it off at the repair place. When I picked up the machine today the back of it has been scratched in a number of places. The screen also has loads of dust/debris underneath the glass display.
View 24 Replies
View Related
Jan 11, 2010
I ran a Permissions repair check, and received the readout :
SUID File System/Library/Core left as is,will not be repaired.
In Red Letters. What is a SUID FILE? I am using a Mac Pro,
running 10.6.2
View 3 Replies
View Related
Feb 19, 2012
I used Carbon Copy Cloner to back up to an external hd. Do I now erase the hd reistall the mac os, then pull my files and apps fom the ext hd?
Info:
imac 24", Mac OS X (10.5.6)
View 3 Replies
View Related
Apr 17, 2012
I am having a very slow running iMac on snow leopard 10.6.8, and using disk utility, am being told the disk needs to be repaired.
Error: This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk. The volume Macintosh HD was found corrupt and needs to be repaired.
Missing thread record (id = 1322757) Incorrect number of thread records
Invalid volume file count (It should be 880464 instead of 880473)
So I need to find my installation disk, and my question is: is this installation disk internal, somewhere within the iMac, or is in on a physical cd somewhere in my mess?
Info:
iMac, Mac OS X (10.6.8), only 6GB free space
View 2 Replies
View Related
Aug 26, 2014
My 2012 MacBook Pro got stuck on the screen with the apple logo and spinning wheel after I tried restarting it.i haven't updated it recently and it was working fine before I restarted it. I did command-r when restarting and when trying to repair the disk I got the following message:
Checking file system
checking journaled HFS Plus volume
checking extents overflow file
checking catalog file
keys out of order (red)
rebuilding catalog B-tree
The volume macintosh hd couldn't not be repaired (red)
volume repair complete
updating boot support partitions for the volume as required
error:disk utility can't repair this disk....disk, and restore your backed-up files (red)
what do i do?? is my computer crashed?
Info:
MacBook Pro
View 1 Replies
View Related
Jul 2, 2012
Disk Warrior reported a damaged resource header that cannot be repaired. The resource header is in an "older" file format (rsrc). I have been having fairly frequent freezes of the system and Disk Utility reporting a corrupted HD which Disk Unility is always able to repair and report the HD to be O.K. Could the damaged header be the cause of the freezes? If so, can anything be done about it if Warrior says it cannot be repaired?
View 4 Replies
View Related
Dec 30, 2007
Started G5, got a question mark. Rebooted from disk. Tried to repair. Told me it could not exit and complete repair to HD. Restarted again. This time everything in utility window red. Message is Fatal Hardware error to disk utility. Back-up if not completely failed and replace with new drive.
Not great at behind the scenes with my mac. Does this mean a shop visit. Any estimate on cost to me. Had lots of Macs. This is the first to crash and burn and its not that old.
Information:
G5
Mac OS X (10.4.11)
View 3 Replies
View Related
