1- I have a Mac mini server running in the basement on a flat screen TV, I use this as my home enertainment center. There are Apple TVs on the rest of the TV's in the house and I have home sharing onÂ
2- thunder storms have caused a power outageÂ
3- The library has been cleaned. The items i still had for down load are still down loading, but all my movies, songs, apps, ect are not listed. Â
4- I was always going to get around to backing it up, and didn't. Iknow, I knowÂ
I think all the items are still there, I tunes just can't find them. One of the two hard drives was approaching full and i was looking at relocating the itunes files to the second hard drive, BUT being a novice with computers I was stumbling and never got it done. I had looked into it and remember scrolling through the screens that had been listed in forums. How do i search for Itunes files? the program runs, but the data is not there?How do i teach Itunes to look where i dropped the files when and if i find them? Â
Info:
Mac mini, Mac OS X (10.6.8), mac mini server
My 2007 intel imac lost power a while back and has been slow and somewhat erratic since that happened. My area suffered a power interuption that lasted a couple of minutes. When i turned the machine on the next day I used the disk utility to verify the disk and repaired permissions. the disk was fine but there were some permission errors which were repaired.After doing all that I found Finder could no longer search and find files, I could still access a file normaly but I could not search for a specific file or a group of files 9 .dmg for example)Firefox was very slow to fully load (30 seconds), one loaded the internet access was fine - 20 mbs or so. I downloaded the latest version of Firefox but it did no good.I had loaded Enequeue a week before the failure occured and that stopped woking. When i would click on a song in my library it would just hang.console error msg indicated the library had changed.A remote printer that had worked fine before the event was no longer reachable. I can see the printer but I can't print to it and if I try to modify the printer settings in CUPS I have to reload the printer driver on the remote machine (a 27" 2011 Imac) because that computer shows the printer as being paused.
All of this seems like it's either a permissions problem or a corrupt system file. I've done the following ton try and fix it Used Disk utility to verify the diskUse disk utility to repair disk permissionsDone a safe mode startReset all the plists.This older imac is used mostly to access my music files on the new Imac, I then use the optical audio output to feed an outboard DAC attached to me stereo in the living room. The new imac is backed up daily but this one is not because it really doesn't have any data on it. It seems that i should be able to fix this without reinstalling everything. Both machines are running OSX 10.6.8.Is there anything else i can try or should i just reformat the disk and reinstall OSX?
My power went out while I was using my iMac today. I was wondering if this could have caused any damage to the computer and if I have to run any utilities etc to investigate?
My iMac has no more sound after a power outage. I fear the soundchip is fried. I've tried all things like reparing permissions and verifying disk. I've read something about PRAM resetting?
I'm currently out of the country doing field research and just the other night, there was a power outage here and now my ibook won't start up. Of course, being in a "third world" country, I wasn't able to invest in a good power surage protector.
Is my computer dead for good?
I have a lot of work that needs to be done and my computer is essential here. Anyway, I can rescue my computer? I press the power button and it does absolutely nothing.
What do you people think might be the problem and how much am I looking at to fix this?
well i've had my mac for about 5 months now, its a OS X 10.5.8 2.4 GHz Intel Core 2 Duo 2 GB 1067MHz DDR3. I have an AX and it has worked flawlessly until about an hour ago. The power in my barracks went out, (im a Marine by the way) and all of a sudden i can't connect. I've tried resetting everything (i.e. the AX, the internet, and my mac) many times and nothing has worked. I've restarted my computer, the light is green on the AX, and my mac says im connected, but i can't get to the internet.
I put my i5 to sleep around midday, came home from work @ 4, and my iMac would not respond to keyboard, mouse, or power button mashing. My wife noted the power had gone out upon seeing the microwave clock. I checked the outlet (her Macbook was plugged into the other receptacle), and there's still power going to my machine.
My computer temporarily shutdown after a power outage. Something I was downloading on vuze went from 50% complete down to 0%. I presume vuze has lost it due to the crash. Any ideas on how I can get it to 'remember' again?
Yesterday evening there was a little lightening here abouts and the whole town lost power for around seven hours (I do not believe my home was struck, just the utility.) Upon manual restart, the date and time on my eMac had reverted to I think December 1977. Odd, because the PRAM battery is less than a year old, and they generally last me three to five years. Also now, when I start up my eMac, Airport asks me to choose a network to join and then asks me to enter a pass word. The Network Preference remains checked, "Remember any network this computer has joined." What ever could have happened, and how do I fix this?
my G5 was in sleep mode during 2 power outages. She will not turn back on, have tried unplgging, wait then replugging and turning powerstrip back on. Also tried holding down command,option, p & r keys along w/ powerbutton..I'm on my kindle fire rt now, but definitely need my Mac back up.
I rebooted after a power outage, which switched off my mac. Booting up it took a long time, maybe 30Â min. Since then every task takes a very long time eg. to open mail 3 min. I got disk utility to open, my boot drive comes up in red, I still havent got any info on it.
This is now the 4th time this has happened, but this time I have at least what I believe to be a cause. After a power outage of about 30 seconds this past thursday all of my printers attached to my imac have disappeared. Not only this, but when attempting to even press cmd p from any program that I could possibly print from slows down the system to a crawl, and eventually crashes. When going through system preferences the printers menu takes about 10 minutes even come up, and when it does, it's empty. When attempting to add a printer back the system once again slows to a halt eventually not responding. I've tried restarting multiple times, making a new user account (which worked for about 3 months the previous incident happened.) The only thing that has fully fixed this problem in the past was to re image the computer. Â
Will this have done any damage? The macbook pro was not powered up, but I had the the mac ac adapter plugged into a power strip with the magsafe adapter connected to the laptop, since I keep it plugged into ac all the time at my desk. The power strip was on while the power outage happened. I had the 3 prong extender cord of the magsafe plugged into the power strip. The power outage was due to a problem with some power lines in my neighborhood, not from a surge of overuse of fuses in my home, so my whole block was without power for about 2 hours.I did notice the power strip has always had 2 lights on; one red, not protected, & one green, grounded. The outlets in my room are only 2 prong, so I have a 2 to 3 prong adapter plugged into the wall that the power strip plugs into. I know this is not the best, but my house is a 1950's era house, & I do not have the knowledge & have safety concerns about trying to convert my bedroom outlets to 3 prong. I hope this did not cause damage to my macbook pro. Is there anything I need to do before powering the mac on to use the next time? besides convert my 2 prong outlet to 3 prong? will there be any static charge? this outage happened on a very hot & dry day in my area.
I loved the Genius Recommendation Panel on iTunes 9 and found lots of new songs and artists when using itI cannot believe Apple removed it from iTunes 10 and replaced it with a social networking site with the awful title "Ping" So I replaced iTunes 9 last night, only to find that it wouldn't accept my iTunes library. I managed to reload the songs, but I have lost all my playlists, star ratings, play counts, etc. Its all gone.
Attempted to create a shared folder today and almost had it working. After a discussion on here, discovered I can share libraries by using fast user switching.
Now when I load my Itunes, every song is blocked out "Unable to locate original file" when clicked on. I have tried Time Machine to no avail.
A few days ago, I opened iTunes and a notification appeared saying my Library was "damaged," and then proceeded to reopen with about 500 songs missing. I went through my iPod to find a few of the songs that were on it that were erased from my Library (I haven't synced my iPod since it happened for fear of losing the songs for good), intending to simply re-import them into my Library - but the files were nowhere to be found. I opened Finder and searched for quite a while, but I couldn't find a trace. Â I've tried opening iTunes while holding down the Option key and choosing a Previous Library, but the most recent of the Previous Library .itl files is the same one - the one missing 500 songs. Â
I maintain my ITUNES Library on an external hard drive. Recently I had a power outage. When power was restored I clicked on my ITUNES before I turned my external drive back on.
More the half my library is now missing. When I click on a song I get message that file cannot be located.
I went to open my itunes and it said "itunes needs a library to open" then it would only let me choose a library that was dated to last july. I clicked on it and it opened my library from that date. I am really mad because it will now only open that library and im missing almost a thousand songs that have been downloaded since then. Why can i only open a previous library? Are all the songs, movies, and other settings that i have changed in the last 6 months gone?
(i7 27" iMac/256GB SSD + 1TB of internal disk hard drive. (SATA/7200rpm/3.5"))The 1TB internal hard drive on my iMac failed the S.M.A.R.T. Utilities test so Apple called in the computer and I had to have the hard drive replaced. The technicians reloaded the system from a 1TB external Western Digital hard drive; I had backed up the everything on it using Time Machine.
Unfortunately, the iTunes application cannot now locate my iTunes library. I create a lot of slideshows on Aperture and use music from iTunes on the audio tracks. The titles on the audio tracks are now inaudible and are preceded by a yellow triangle with an exclamation mark inside.
how I should re-establish the original link between iTunes and its library. The music files are located in folders (name of artists), within a folder (iTunes Music), within a folder (iTunes), within a folder (Music), within a folder (declangreaney) on the 1TB of internal disk drive.In trying to solve the problem, I went through the folders and double clicked on one song. This opened iTunes so I highlighted and dragged all the other 'artist-named' folders on the iTunes interface and in doing so, I succeeded in accessing all the files.
Info: iMac, Mac OS X (10.7.3), (i7 iMac/256GB SSD + 1TB Int. HD
Recently had operating system crash. When Apple got me back up and running, my library and playlists were gone. Fortunately I have them on my ipad. When I next sync with the new itunes where these songs are not present, will they be lost. Is there some way to "upload" them from my ipad to itunes?
The other day the electricity to the house was turned off with Itunes running on my computer. Im running a G5 Mac OSX version 10.4.11 if that helps. When i turned the computer back on it read itunes library corrupt and the only option it gave was to press 'OK'.
Out of 8000 or so songs, 3000 remain in the library. There are some songs on the hard drive under 'Music' which is some of the missing songs but not sure if its all of them
My question is, is there any way possible way to restore my itunes library back to its state prior to the power out? restoring all playlists and everything!
I've just upgraded from a Power Mac (V10.5.8) to a Mac Book Pro. I'd like to transfer all the music I have in iTunes (V10.6.1) and don't want to have to buy Leopard just for this one-off. I've used the thunderbolt to copy everything else ok.Â
I'll probably push all my content to iCloud to share on my great new iPhone as well, but 1 brideg at at a time!!Â
My iTunes library has apparently filled my entire iMac (according to the computer I have over 97 days' worth of music). I would like to know 1) how to properly save my iTunes library to an external hard drive and 2) how to use iTunes so that it uses the library on the external drive.
Since upgrading to Lion I can't access my photos in iPhoto. The folder is greyed out in my Applications folder. Could it be to do with my version of iPhoto (8.1.2)? If I spend more money and upgrade it will my photos then still be in the folder on my iMac?
am new to this and have a new iPhone I was wonder if I can get a simple question answer i tried Google and there seems to be a bunch of ways to do what I?m looking for.So I want to take my friends iTunes library (5300+ songs) and transfer them to my library ( 2000+ songs ) and then once that is done I want to be able to put them on my iPhone / ipod 32g ( 32g 3gs black can anyone tell me how and keep in mind I want to kiss (keep it simple st#$id )
My entire library was on an external hard drive that crashed. All of my audio is on my iPod and all of my videos are on my Apple TV (including purchased videos and audiobooks). Is there a way to rebuild the library again?
I installed a new HDD. I reinstalled OS X by first installing my original Tiger and then the Leopard upgrade. Don't ask why I did not just go straight to Leopard because I don't know I then used the Migration Assistant to bring in the TM backup. I went to open iPhoto and I am getting: wtf? I think that I am going to reinstall OSX. I have the original HDD; is there a way to transfer everything from that directly? Maybe I will try doing an "Erase and ReInstall" option right from the Leopard disc and then choose the TM option.
With the update to OS-X 10.7.3 did anyone lose the entire Library folder from their user directory? I didn't notice until I started working on the installation of an application (beta version) and found the my entire ~/Library/ folder gone, all 57+ GBytes of it. I'm restoring it from Time Machine two days ago, but I wonder what happened with the update to completely remove it.
