MacBook Pro :: Power Outage On Neighborhood Block - Plugged In But Not Powered On
Nov 4, 2010
Will this have done any damage? The macbook pro was not powered up, but I had the the mac ac adapter plugged into a power strip with the magsafe adapter connected to the laptop, since I keep it plugged into ac all the time at my desk. The power strip was on while the power outage happened. I had the 3 prong extender cord of the magsafe plugged into the power strip. The power outage was due to a problem with some power lines in my neighborhood, not from a surge of overuse of fuses in my home, so my whole block was without power for about 2 hours.I did notice the power strip has always had 2 lights on; one red, not protected, & one green, grounded. The outlets in my room are only 2 prong, so I have a 2 to 3 prong adapter plugged into the wall that the power strip plugs into. I know this is not the best, but my house is a 1950's era house, & I do not have the knowledge & have safety concerns about trying to convert my bedroom outlets to 3 prong. I hope this did not cause damage to my macbook pro. Is there anything I need to do before powering the mac on to use the next time? besides convert my 2 prong outlet to 3 prong? will there be any static charge? this outage happened on a very hot & dry day in my area.
My 2007 intel imac lost power a while back and has been slow and somewhat erratic since that happened. My area suffered a power interuption that lasted a couple of minutes. When i turned the machine on the next day I used the disk utility to verify the disk and repaired permissions. the disk was fine but there were some permission errors which were repaired.After doing all that I found Finder could no longer search and find files, I could still access a file normaly but I could not search for a specific file or a group of files 9 .dmg for example)Firefox was very slow to fully load (30 seconds), one loaded the internet access was fine - 20 mbs or so. I downloaded the latest version of Firefox but it did no good.I had loaded Enequeue a week before the failure occured and that stopped woking. When i would click on a song in my library it would just hang.console error msg indicated the library had changed.A remote printer that had worked fine before the event was no longer reachable. I can see the printer but I can't print to it and if I try to modify the printer settings in CUPS I have to reload the printer driver on the remote machine (a 27" 2011 Imac) because that computer shows the printer as being paused.
All of this seems like it's either a permissions problem or a corrupt system file. I've done the following ton try and fix it Used Disk utility to verify the diskUse disk utility to repair disk permissionsDone a safe mode startReset all the plists.This older imac is used mostly to access my music files on the new Imac, I then use the optical audio output to feed an outboard DAC attached to me stereo in the living room. The new imac is backed up daily but this one is not because it really doesn't have any data on it. It seems that i should be able to fix this without reinstalling everything. Both machines are running OSX 10.6.8.Is there anything else i can try or should i just reformat the disk and reinstall OSX?
My power went out while I was using my iMac today. I was wondering if this could have caused any damage to the computer and if I have to run any utilities etc to investigate?
My iMac has no more sound after a power outage. I fear the soundchip is fried. I've tried all things like reparing permissions and verifying disk. I've read something about PRAM resetting?
I'm currently out of the country doing field research and just the other night, there was a power outage here and now my ibook won't start up. Of course, being in a "third world" country, I wasn't able to invest in a good power surage protector.
Is my computer dead for good?
I have a lot of work that needs to be done and my computer is essential here. Anyway, I can rescue my computer? I press the power button and it does absolutely nothing.
What do you people think might be the problem and how much am I looking at to fix this?
well i've had my mac for about 5 months now, its a OS X 10.5.8 2.4 GHz Intel Core 2 Duo 2 GB 1067MHz DDR3. I have an AX and it has worked flawlessly until about an hour ago. The power in my barracks went out, (im a Marine by the way) and all of a sudden i can't connect. I've tried resetting everything (i.e. the AX, the internet, and my mac) many times and nothing has worked. I've restarted my computer, the light is green on the AX, and my mac says im connected, but i can't get to the internet.
I put my i5 to sleep around midday, came home from work @ 4, and my iMac would not respond to keyboard, mouse, or power button mashing. My wife noted the power had gone out upon seeing the microwave clock. I checked the outlet (her Macbook was plugged into the other receptacle), and there's still power going to my machine.
My computer temporarily shutdown after a power outage. Something I was downloading on vuze went from 50% complete down to 0%. I presume vuze has lost it due to the crash. Any ideas on how I can get it to 'remember' again?
Yesterday evening there was a little lightening here abouts and the whole town lost power for around seven hours (I do not believe my home was struck, just the utility.) Upon manual restart, the date and time on my eMac had reverted to I think December 1977. Odd, because the PRAM battery is less than a year old, and they generally last me three to five years. Also now, when I start up my eMac, Airport asks me to choose a network to join and then asks me to enter a pass word. The Network Preference remains checked, "Remember any network this computer has joined." What ever could have happened, and how do I fix this?
my G5 was in sleep mode during 2 power outages. She will not turn back on, have tried unplgging, wait then replugging and turning powerstrip back on. Also tried holding down command,option, p & r keys along w/ powerbutton..I'm on my kindle fire rt now, but definitely need my Mac back up.
1- I have a Mac mini server running in the basement on a flat screen TV, I use this as my home enertainment center. There are Apple TVs on the rest of the TV's in the house and I have home sharing onÂ
2- thunder storms have caused a power outageÂ
3- The library has been cleaned. The items i still had for down load are still down loading, but all my movies, songs, apps, ect are not listed. Â
4- I was always going to get around to backing it up, and didn't. Iknow, I knowÂ
I think all the items are still there, I tunes just can't find them. One of the two hard drives was approaching full and i was looking at relocating the itunes files to the second hard drive, BUT being a novice with computers I was stumbling and never got it done. I had looked into it and remember scrolling through the screens that had been listed in forums. How do i search for Itunes files? the program runs, but the data is not there?How do i teach Itunes to look where i dropped the files when and if i find them? Â
Info: Mac mini, Mac OS X (10.6.8), mac mini server
I rebooted after a power outage, which switched off my mac. Booting up it took a long time, maybe 30Â min. Since then every task takes a very long time eg. to open mail 3 min. I got disk utility to open, my boot drive comes up in red, I still havent got any info on it.
This is now the 4th time this has happened, but this time I have at least what I believe to be a cause. After a power outage of about 30 seconds this past thursday all of my printers attached to my imac have disappeared. Not only this, but when attempting to even press cmd p from any program that I could possibly print from slows down the system to a crawl, and eventually crashes. When going through system preferences the printers menu takes about 10 minutes even come up, and when it does, it's empty. When attempting to add a printer back the system once again slows to a halt eventually not responding. I've tried restarting multiple times, making a new user account (which worked for about 3 months the previous incident happened.) The only thing that has fully fixed this problem in the past was to re image the computer. Â
Does anyone have any experience daisy-chaining FW 800 drives on a MBP? I've got one right now, but am thinking of adding another but I don't want to use an AC adapter if I don't need to. Will the MBP give enough juice to run 2 daisy-chained FW 800 drives (2.5")? I've got the late 08 unibody 15".
Since I just took the plunge and purchased my first MBP, I certainly want to protect it. I've been looking at the Speck/Incase hard shells, but I hear they block access for the power adapter.
I am the original owner of a Power mac G5 dual 2.0 I purchased this machine in april of 2004 and it has been working nearly non stop ever since. Recently I put it into sleep mode and when I came back it had powered down and would not start up. I assume it's the power supply and I would like to know if there is anyway to tell what type of power supply and model thereof without tearing down the machine.
Information: Powermac G5 Dual 2.0 Mac OS X (10.4.9)
I just bought a macbook air, and i am wondering, if i can use my macbook air plugged in to the charger at all times using at home? or i have to charge it , then empty the battery, and charge it again then remove the plug and empty the battery again and again? Cant i just use the macbook air plugged in when i am home? Will that affect the battery life of my MBA?Â
I have a late Macbook Pro 13''I using it at home about 10 hours a day. so it's allways plugged in to AC Power while I'm using it, and when I'm not using, I disconect it from Power.I want to know if this damage my battery OR not? Or should I running my Macbook on Battery? and recharge it (and cycle monthly ... )
I think the title pretty much explains it all. I'm wondering if there's any harm that would come from leaving the power adapter plugged in all the time, but without the MacBook connected some of the time. I'm a college student, and with the way I have my desk set up, I can't really take the power adapter with me everywhere I go. So yeah, I was wondering if there was any harm that would come from it.
I have a 13 inch Macbook Pro that sometimes it works fine, but it always suddenly slows down and doesn't fix itself, but the moment I plug it into the electrical power it normalizes itself and works fast without a problem.
This probably seems a bit ridiculous, but after having my first power supply melt and short out on me I've been completely paranoid of this happening again. My first power supply was one of the older models from 2006. I then got it replaced by one of the newer smaller models. After about a half a year it started twisting around on the inside of the cable which got me worried. The apple store wouldn't replace it unless it was melted so I called Apple and got a new one.
I've had the newer one for about a year and the cable seems to be wrapping around itself on the inside again. There doesn't appear to be a place where it's melting or breaking. I take care to not wrap it too tightly. Using it as a desktop replacement I'd like to not have to worry about leaving it plugged in when I'm gone. I find it crazy that this is even an issue but after having the first one melt right in front of me I find it hard to trust. Are the newer power supplies any better?
My MacBook Pro power adapter lights up orange even though it is not plugged into a device. When I do plug it into my laptop it remains the same and does not charge. Due to this my laptop is now dead.
When I unplugg my pc vid card 5770 i can boot to mac but when i plug it in the power port on motherboard i can only bootcamp to windows is this normal?kind of a hassle everytime i want to play games because i have to shut down then plug in vid card to crossfire
I get this strange message every so often, sometimes more often than other times. It says:
USB port drawing too much power. The device that is plugged into it will be deactivated.
There are only two things plugged into the USB-The keyboard and mouse. When I get this message, the mouse freezes. If I jiggle the mouse cable where it is plugged into the USB, it comes back and everything is fine until this message comes up again.
I use my MBP 15" (the new one), as my primary machine in my office. I sit by my best usually 10-12hrs a day working on it.
I am trying to figure out what is best to do, keep the AC plugged in or have it un-plugged and only plug it in when the battery is drained (or less then 50%)? I have tried different experiments, plugged in, not-plugged and time is about the same for life of the battery. The true question is, how is is best to do it for the health of the battery.
So I just got hold of a few of these new battery chargers from Apple and I'm just wondering if these are meant to stay plugged in the wall, even after the green light goes off. Does the light going off mean that the batteries will no longer draw power from the power outlet and that it is safe to assume power will continue to be consumed? Or is it preferred that I plug and unplug the charger only when needed to avoid any, unnecessary, extra power consumption?
