My friend has a 20 inch iMac (model MB324LL/A) and he has bought 2x4GB SO-DIMMS from cosair. He has put them in and the mac wont recognise them, however it will recognise and boot up with 6GB (using 1 old chip and 1 new one) and he has tried swapping the chips about to make sure one is not faulty.
According to cruicial and Apple the max supported is 4GB but if it runs on 6GB can he get it to work on 8GB somehow?
My iMac currently has a 1Gig 800 DDR2 memory stick inserted and I was wondering if I can add a 1Gig 667 DDR2, or do I have to use another 800 DDR2?
Just wondering if I have to buy another one, or use the one I already have but has different speed.
Info:
iMac, Mac OS X (10.6)
I have a 20 inch imac that I bought about 2 years ago. The processor is a 2.4 GHz intel core 2 duo. and the memory is 1 GB 800 MHz DDR2 SDRAM. I am wanting to try and sell this and buy new 13" macbook pro, the 2.4GHz model with 4 GB Ram. I want to get this now because I do alot of video editing for action sports using Final Cut Pro, now getting into Adobe Premiere, but I am driving alot and would like to have a MBP to bring with me now. I want to know though, how much of a performance difference would I see using this for Final Cut Pro and Adobe Premiere?
View 4 Replies View RelatedI have taken some measurements from my PSU and since I have not seen this sort of info posted anywhere else and it is not in the service manual I thought I'd share it here.
refer attached
Note ** The voltage on pin 4 varies according to the temperature of the PSU and ranges between 1.7V and 2.5V - Higher voltage = lower temperature.
I recently bought an used iMac (was purchased new in feburary 2009) in which I knew the screen was not showing any video when I bought it. ( I was okay with that I thought I'd give it a go at fixing) well the problem seems to be within the LCD itself. When I hit the power button I hear the chime, fan spins, and the hard drive does it's thing. I ended up taking the casing off the iMac to where it only shows the bottom half of the insides underneath the LCD. My question is now to diagnose what exactly is wrong with it by using the 4 led lights. I have searched the forums and the Internet up and down for which ones mean what but I have only found out information on older iMacs. When my iMac is off (still plugged in) LED 1 is on. When I turn the iMac on LED 1,2, and 3 are green. Which that leaves the 4th LED not being lit up at all. I suspect this has something to do with the iMac not showing any video but as I said I am not sure because I cannot find any information on it anywhere.
View 4 Replies View RelatedI'm trying to find what specific HDD I can buy to get my iMac (Early 2008) up and running again. Although now over 4 years old, this desktop has been great! It looks like I can replace it myself, but I want to buy the right part.
Info:
iMac, Mac OS X (10.7.4)
I've currently got 12GB of DDR2 667Mhz of RAM in my 2006 Mac Pro, could I use 1066mhz DDR2?
View 4 Replies View Relateddoes anyone know if there's any 1066 DDR2 FB-DIMM Ram, vie found 800mhz but not 1066..
View 8 Replies View RelatedI'm sure there are some sticks that aren't compatible but is there any difference b/w the PC2 a Power Mac G5 (Late 2005) takes and a PC?
View 1 Replies View RelatedI'm selling my 2GB of DDR2-667 from my 2008 MBP to someone and they asked if it would work in the PowerBook G4? Would it work and is the RAM backwards compatible (to a certain point)?
View 2 Replies View RelatedOn my iMac g4 I've got 2 different ram ddr2 speed sticks in there. The standard 256mb apple shipping stick and a faster sodimm, (1.0ghz iMac). My question is will this work just fine, I mean it boots and runs fine or will I get compatibility issues later on?
Dimm0. 1gb. Pc2700u
Dimm1. 256mb pc2100u
How much of a difference in these specs?
I see MacMALL is selling MBA with the former in both categories and i didnt know how much it will affect my performance. Should i spend the money for the upgraded specs?
I am trying to upgrade the RAM in my white macbook from 2 GB to 4GB using the RAM from a Sony VAIO laptop. If I put both 2 GB sticks from the other laptop in, my computer turns on but does not boot. The screen never turns on. If i have one of the original sticks in, and one of the new sticks in, it boots up fine and the system profiler recognizes the new RAM and says it is in working order. Why can't I boot with both sticks in? They are both DDR2 667MHz sticks and are all working.
View 10 Replies View RelatedFor the Mbook Mid 2009 model (Rev. H), in the tech specifications it says it supports 800 MHz DDR2 SDRAM. However, I have 2 sticks of DDR-667 SDRAM lying around so I wouldn't mind using those if I can. Would the Mbook Mid 2009 work with DDR2-667 SDRAM?
View 1 Replies View RelatedI have a 1.67ghz G4 PowerBook that has the dreaded lower ram slot failure. This limits me to 1gb of ram, though the machine works fine otherwise. My understanding is that this PowerBook does not accept more than 2gb ram..... So, my question is this: Will this PB not accept more than 2gb ram total, or will it simply not accept DDR2 larger than 1gb each, be it one or two??
View 5 Replies View RelatedDoes anyone know if this will work. I find they cost the same for 4 gb. I was thinking then I would have flexibility to put into another machine in the future. I know in the PC world this is possible. Not sure about macs.
View 3 Replies View Relatedhow do i install Apple Memory Module 2GB 667MHz DDR2 (PC2-5300) 2x1GB SO-DIMMs in my 2008 mac mini
Info:
Mac mini
Still waiting on my new 27" i7 imac. Trying to figure out if current desk is suitable. Can someone tell me the dimension in inches of the imac 27 from top of desk to the top of the imac
View 7 Replies View RelatedI hope you don't mind helping a guy out in his choice in what he truly needs... so I guess I'll get down to the basics.
First off, music is my main priority when it comes to computing, I write all sorts of electronic music, I'm used to working in Windows under Ableton or FL Studio, so I'm not hip to the Mac software for these functions.
In addition to the electronic music I write, I'm also very much into music instruments, I've been playing drums for around 8 years now, bass for 5 years, guitar even... so I plan on multi-track recording... up to 16, maybe even 32?I do plan on opening up my own home studio, I would be using this PC, (not sure if the MBP or the iMac)
I'm also a lightweight gamer, playing games such as Team Fortress 2, World of Warcraft, or StarCraft II (Diablo 3 will probably be my biggest gaming vice when it comes out) sparingly in my free time, which would be better for this sort of light gaming?I sometimes spend up to 8 hours on the computer, also, so if these screens are too harsh on the eyes after extended periods of time, I'd appreciate if someone could enlighten me to that.
SO, with all that said, which do you guys think would suit me better? (and I'm really thinking the iMac would)... I used to want portability, but I don't think I'd feel comfortable taking a $2,000 laptop with me around campus at the local community college.
- Needs to be able to record up to 32 tracks of audio
- Needs to be able to render high quality tracks
- Minimal latency
- Able to run some of the less graphic intensive games out now
- Easy on the eyes for extended periods of time
Oh, I'm also an amateur filmmaker, I love filming, editing, and producing, etc.Would you guys suggest the i5? i7? Oh, and what clock speed does the 2.93GHz i7 run at when in turbo-boost using all cores?Oh, and what's the resale value of the iMac compared to the MBP? I heard the MBP retain pretty well, is the same true of iMac's?
System Spec: Late 09 21" 3.06, GeForce 9400, 4gb ramCurrently I have itunes and safari running, if i enable the visualizer my imac is noticeably slower, especially when browsing the internet.I thought it might be the fact I was running a second 1080p display from the 9400 would have caused the slow down. But the same thing occurred after i disconnected it. After repairing permissions and restarting, pmram etc.Is the 9400 causing the slowdown? I know its fairly old but itunes visualizer and safari should be quite basic tasks. Its not the end of the world i know but does the 27" imac have similar issues as i plan to upgrade my machine in 2011.
I had a DLink DIR-655 Wireless N router and my wireless was running very fast, 9.7MB using [URL] with no lag looking up sites. I had to upgrade the router since I was hosting a site and the router wasn't working properly for that.
So, I bought a Linksys WRT610N Dual Band router. I have the iMac running on the 5GHz band and it runs around the same speed.
HOWEVER, when I open Safari or Firefox, in the status bar, it says "looking up google.ca..." or whatever site I'm browsing for and can take up to 5-10 seconds before it starts to display the site. When it is on the site, browsing around is fast as long as it doesn't change domains.
ANOTHER HITCH, I have VMWare's Fusion installed on the iMac and Vista installed there and there is no lag to browsing a site. When I type in the site, it immediately goes to the site and I am able to browse fine.
Any thoughts on this?
The Mini Has Some Great Software On it, Could i Use Migration Assistant To Transfer The Programs To My iMac Without Losing My Data On My iMac? Or is There Any Other Way?
View 2 Replies View RelatedI think it worked at one point, but sometime around the point when I set up Fusion with the partition, Windows Aero turned off and is no longer an option in the display settings. I installed this driver with the modded INF to see if it would do anything, but Aero is still not an option. I also have issues playing some games in Fusion, while they work fine in Boot Camp.
View 7 Replies View RelatedI sent an email to Steve Jobs about my yellow tint 21.5 iMac issues (three exchanges, all affected, resulting in a refund). I got a call from Dena at Executive Care within 24 hours.
She said they are aware of the problem and do not know how widespread it is. According to Dena, the issue is not resolved and that ordering a new iMac will not result in a fixed display.
She said the engineers are working on it now and they are not sure if it's hardware (most likely) or software related. Further Apple stores cannot do repairs because they haven't determined what the issue is.
I have been reading and reading but I can't seem to find the answer. Im trying to figure out if the optical drive for the iMac has a slimline sata connector or a standart sata connector. Reason is I'd like to install an SSD and use an optibay adaptor.
View 6 Replies View RelatedHey guys! So just a few days ago, I received my iMac, and boy do I love it. A definite upgrade and improvement from my old Acer Aspire 3680.
But despite this, I have noticed that my iMac does have a slight yellowish tint at the bottom to corners. I just arrived at my desk, and the login window (I keep a password lock) had a slight yellowish tint when I woke up my iMac from sleep . I then noticed that the bottom two corners had a slight yellow tint to them. I verified this via the MacRumors Forum post, and I was able to find it out by making my desktop background white. Again, it may not seem noticeable at first, but if you examine it closely, it becomes apparent.
I've already called my local Apple store and one of them said that don't know about this issue (?) and that they could schedule an appointment for me. I declined because I have to have me parents take me and I'm pretty sure that I can't handle the load of carrying a 20lbs. computer w/o dropping it (yikes!).
So here's the big question, should I go to my local Apple store or call the Apple hotline when it's open (currently closed at the time of this thread)? I don't want to sound like a lunatic or someone that just wants to get a better iMac for free. Again, it's slight, but considering that I do movie editing and Photoshop work
Since the positive/negative ratings on the front page are always more tilted towards negative, rate the iMac update by stars here. Feel free to add a comment explaining your rating, or what could've made it better.
View 6 Replies View RelatedI don't know what the deal is. I'm trying to install 2 sticks of 2GB into my 7,1 iMac, and the screw just won't turn. I'm using a standard Phillips head, and nothin' doin'. The screw is now starting to strip, so I guess I'm going to have to take this into the friggin' Apple Store just to have them open the thing.
Had a quick question. I'm on my third 27" stock 3.06Ghz imac that was replaced yesterday. The good news is that so far it doesn't seem to have any of the problems of my previous two 27" imac's. There is one thing though. A couple of seconds after pressing the power button to bootup there is a brief mechanical sound from the dvd drive like a quick ejecting sound even though there is no cd in the drive. My first 27" imac dvd drive made the sound but the second imac 27" Imac I had didn't. Is this sound normal? Would be curious to know why two out of the three 27" Imac's I had make that noise.
View 3 Replies View RelatedI have found a bug with the 27" iMac (i upgraded from a 24" imac. stupid move.?)when I zoom in on an image the window with go on the RH side to the iMacs max screen width. in that it hides the scroll bars behind the Pallet and side menus and options.Has anyone else had this problem.?has anyone else found a cure for this also.
View 5 Replies View Related