IMac (Intel) :: Unable To Connect Windows 8.1 PC To Airport Signal
Dec 1, 2014
I've spent the past few hours attempting to connect my new Windows 8.1 laptop to my iMac's Airport signal without any success. I was able to do this very thing using Windows 7 on an old laptop. From what I've been reading, it seems that the ability to connect to networks secured with "WEP-Shared" type security has been removed in Windows 8 because of the fact that it was outdated and insecure. It's great that Microsoft is trying to force individuals to be secure, but unfortunately the iMac's airport utility does not offer any alternatives.
I am having random slowdowns on my connection speed using Airport (nothing to do with the notorious performance issues which I also suffer).
My appleTV and my HP 2140 get 90% (it's right by the router) and 80% (floating around the same floor of the house) signal strength respectively, download speed and throughput seems very stable on both, however on the iMac (that's about 10 feet away from the router) the signal strength is 28% ! this is incredibly low and even though it does not always hurt download speed it does hurt the total throughput when sharing files over the network. Also the SNR (signal to noise ratio) is incredibly low, below 30 all the time.
One fine day, my iMac running Mavericks 10.9.2 has stopped connecting to internet over WiFi. it is self assigning an IP to itself and refuses to do a DHCP handshake with my router. My other wifi devices can connect to this network without any issues. So us the same iMac when it runs Windows 8.1 on the boot camp partition. I have tried the following fixes, but to no avail:
1. Delete the location 2. Delete networks 3. Reset DHCP 4. Restore Mac to a previous restore point where it used to connect to internet without any issues.
Info: iMac (27-inch Mid 2011), OS X Mavericks (10.9.2)
So I used the internet this morning no problem. I come home this evening and can't connect wirelessly with my airport. Every time I open Safari and type in an address I get this message:
IP Configuration
192..... in use by 00:1f:a......, DHCP Server 192....
My brother has wireless internet for his house which is wha I connect to.
I'm looking to run video out to two TVs, but it's over a decent distance, so I'm worried that using an HDMI splitter would cut the signal and suffer quality loss. I was wondering if both mini DisplayPorts can be linked to output the same signal at the same time, so that both TVs can show the same thing but each signal is at full force.
I currently use a Powerbook, and I access the internet though our AirPort Extreme router. Recently, for some reason, although I am on the right network, and signal strength is full - I am unable to connect to the internet! I've called my provider, and everything is fine on their end according to their systems. I've tried power cycling, and checking my settings, and everything SEEMS to be ok.
Unable to connect to the database:Could not connect to MySQL I just started to receive this message, when I try to go to this one website. What caused this? and how can I fix this problem? I an geet to website using other browsers.
I bought my MacBook Pro and a brand new Airport Extreme to go with it about 4 months ago. I have the MacBook and my wife's iMac hooked up wirelessly to the Airport Extreme with no problems. My son't Wii also hooks up with no problems wirelessly. My Xbox 360 hooks up sometimes, and sometimes it doesn't. It's not wireless, it's hooked directly to the Airport Extreme via Ethernet cable. When I first got the Airport Extreme, the Xbox had no problem hooking up to it and the internet. But lately it sometimes hooks up, and sometimes it doesn't...with no explanation as to why other than maybe the position of the planets or something. Restarting the Airport Extreme helps sometimes, sometimes it doesn't. I'll just leave it be for a few days...change nothing...and then try the Xbox again and automagically it seems to work...for a few days. Then for no reason will just stop again. It can't connect through anything then, not even hook up to one of the Mac's using Connect360. It's as if the 360 is not even hooked to any network then. Also, the Xbox 360 had zero network problems when I was using a DLink router, which was the set-up to hook to the internet and the hub of the home network for the past year. The 360 could hook to the Macs and access the Internet. But the Dlink wasn't wireless, which is why I went with the Airport Extreme when I got my Macbook Pro.
After upgrading to Lion on my Macbook Air, I can't seem to be able to connect to my external speakers through airport express. Somehow I can't get the little icon I used to do, on the bottom right corner of the iTunes window (on the left of genius) to select the speakers. I checked the preferences in vain.
Info: MacBook Air, Mac OS X (10.7.4), Have airport express installed
I have been trying to connect my PS3 to my iMac for the past couple of days but with no success. Airport is on and broadcasting through the card built into my mac but it keeps saying "it can't connect to the server." I have connected my ipod touch and Wii with no problem through airport but for some reason it won't work with the ps3. Any suggestions or help?
i recently bought an Airport Express, and i finally took it out of its box after i purchased my new stereo. I connected the audio cable to the stereo and the airport unit and plugged it into an outlet. I opened up airport utility on my mac, AX appeared and i configured it to "join a wireless network". After completing the remaining steps, i updated it.. and waited for it to restart. Now here's my problem. It comes up with an error telling me it couldn't find the device after restarting. I have Verizon FiOS as my provider.. and I know that airport express has a history of trouble with the Actiontec router. Is there anything i can do with my current equipment to get this thing to work? I do not need to extend the network.. only join to use airtunes and print wirelessly... Also, my Actiontec router and FiOS connection are through my crappy dell pc downstairs, while i am using my 24" iMac upstairs in my bedroom trying to connect this. Should i change my router's settings?
I am unable to add aan HP Laserjet 1212nf printer connected to an Airport Base station. When I click add it takes me directly to the I.P. window. My MacBook pro running 10.6 does not see the printer, Bonjour does not search for it.
I have a network of 4 macpros, 6macbook pros, 2 imacs & 7 windows machines running xp, and a laptop running vista business. I recently purchased an airport express base station to put my usb printer (Epson Stylus photo 1390)on the network. All macbook pros & imacs are printing efficiently on wireless. Macpros are using the printer shared from one imac. But i don't understand how do i connect my windows pcs to the printer (all are on ethernet lan). Is there a way to connect them.
I have had my iMac for roughly a year and a half. I currently do not use a router, i know i need to change that, especially for security reasons. Anyway, the airport/wireless has always worked but recently for maybe the past month it has failed to connect, i am wandering if there is a way i can check to see what's gone wrong? or any instructions/tips to help me figure this out.
I have my iMac connected to my wireless router via ethernet, but also airport is on. At the top right I can see I am connected to my network. How can I chose the faster ethernet to connect without turning of airport? How can I be sure the connection is with ethernet and not wireless?
My airport connection to the wireless router has, over the last few days, been becoming increasingly flaky and intermittent followed last night by a total refusal to connect. It had been working fine for at least a year up until recently. The funny thing is that iStumbler finds my router(as well as some neighbours'), and reports a signal strength similar to what I have always had. Problems started as follows: iMac would show full bars, then no bars and then full again, followed by a slow drop to nothing. Turning airport off and back on again, would repeat this process. Occasionally, the iMac would also require the WPA2 password. And progressed to: Over a few days things got worse to the point that I had no usable connection and the airport would not always pick up any networks and would request the WPA2 password repeatedly always followed by a 'Connection timeout'.I would say that the airport extreme card is broken, except iStumbler is reporting 'normal' service. Also, my iPhone reports full signal strength sitting next to the iMac! Can anyone shed some light on this? Typically, Applecare expired all of 2 weeks ago.
Since the latest update of OSX, I'm encountering trouble with my WiFi connection. My old sony laptop has no problem connecting, so I'm guessing the problem must be with the iMac, and not with the network. When I boot the mac, everything is OK, I get connected. But after a while (less then half an hour) it looses connection to internet. In the airport icon appears a " ! ". To get my mac back on the network, I have to reboot it. It's not a signal problem, my mac always finds the network, but it doesn't connect. My password is asked, I'm sure I entered it wright, but it's asked over and over, no connection possible. I tried changing DHCP to a fix IP, deleting the network and reconnect as if it's a new one, and little stuff like that, nothing helps. Only way is to reboot.
Have been unable to connect to internet today. My airport icon says, No Airport Card Installed. M mac laptop is connected, and our Roku tv is connected as well.Have tried all the troubleshooting things here: [URL]...
I'm all of the sudden having problems with the airport connection in my MacBook Pro laptop at home. In areas where it used to work---a week ago--the signal comes and goes from 4-5 bars to all of the sudden none and I am disconnected from my wireless internet. Nothing else has changed (cable modem, wireless router).
I have installed windows XP in my MACBOOK. Everything went well except internet connections. I am unable to connect with my wireless network. But able to connect when logged in mac OS. Do i need to install any drives for this.
I have my AE set up in my office where three computers and two printers are picking up its signal just fine. However, I have a computer in another room that is only about 30 ft away from the AE router and sometimes the signal is very week while other times it won't connect at all. Yet, I can pick up other networks from other houses just fine.
I have an ibook G4 1.42 ghz. It worked fine until recently. After connecting to a wireless network for a few minutes, it then begins to sporadically drop out. And after losing the connection, it can't detect any wireless networks. Turning off the card, restarting the computer, letting it sit for a few minutes... signals come in and out, but then drop again.
I'm using OS X.4, so this isn't a software problem, the OS, or caused by an update. The antenna also isn't faulty. The computer reads the card as being fully functional, but just doesn't detect any wireless networks. I've exhausted all software solutions and now can only conclude it's a hardware problem. Given the symptoms I've described, would the best idea be to replace the card altogether?
Sometimes while using my Powerbook in the house, the signal on my Airport connection will either drop completely or drop down to 1 bar which makes it extremely slow and barely usable. Normally, I'd blame the router, but the couple times this happened, I grabbed my brother's MacBook, set them side-by-side, and connected to the same access point, my PB had 1 bar or nothing at all, and his MB was at full strength and was working fine. Eventually, the PowerBook will go back up to full strength and be usable again, but after awhile, it will go back down too. It's an intermittent thing.
Can I add an Airport Extreme to a network to get a stronger signal? Im using my roommates wireless (WAP) signal with only one bar. I have the white Airport Extreme that looks a flying saucer. (802.11g?) to his Linksys wireless.
I want it to provide a boost to the signal in the basement for my touch. As well as stream music from my laptop. The issue Im having is that the music keeps on cutting out. The newer one this is listed under is working fine, but on the other side of the room, it is setup to Extend the 'n' network (which I assume means allow my laptop better signal in the basement.)
The older one is on a b/g network, which I setup as a WDS network and then setup the express as a WDS relay, which I assumed would provide signal strength for the b/g network in the house (so we are running b/g & n). But setting it up as a relay it still loses connection with the laptop (I am assuming this is with the b/g network itself) and I believe that the touch's WiFi connection also drops with the music, because it is all the b/g network.
The b/g network trickles into the basement, but I assumed with the b/g touch setup as a WDS Relay, that it would strengthen the signal for my touch and ALSO keep the signal strong between the laptop and the express (Im guessing they are talking over b/g). But after being setup as a WDS relay the music is still dropping, and I only assume the touch's wifi signal is dropping as well! I also had to setup the ENTIRE b/g network as WDS because I did not get an 'extend range signal'.
