PowerPC :: Airport Signal Drop Completely
Dec 29, 2007
Sometimes while using my Powerbook in the house, the signal on my Airport connection will either drop completely or drop down to 1 bar which makes it extremely slow and barely usable. Normally, I'd blame the router, but the couple times this happened, I grabbed my brother's MacBook, set them side-by-side, and connected to the same access point, my PB had 1 bar or nothing at all, and his MB was at full strength and was working fine. Eventually, the PowerBook will go back up to full strength and be usable again, but after awhile, it will go back down too. It's an intermittent thing.
View 4 Replies
ADVERTISEMENT
Aug 16, 2010
I'm using an airport extreme (latest firmware) with 10.6.3 on a mac pro and a macbook pro. The mac pro is wired the macbook pro is connected via wireless.
I constantly have signal drops. While the airport extreme seems to stay online (green light is sold) the cable modem always resets itself.
I can't figure out if this is because of my Optonline service or due to my router (airport extreme). Cablevision states nothing is wrong with my cable internet connection and the issue may be with the router. I've tried three different modems from them and they've supposedly checked everything (wires, signal, etc). I still think it has something to do with them. I'm hesitant to try DSL as it is slower (no fios here yet).
I don't get how it can be the router if both my desktop and laptop lose connection to the internet at the same time if they happen to be connected online at the same time.
Is there anything I'm overlooking in regards to the airport extreme? Should I trash a particular preference or try a different setting?
I'm kind of desperate at this point since it is highly annoying to constantly get knocked offline more than 5 times a day.
View 7 Replies
View Related
Nov 2, 2010
I have an ibook G4 1.42 ghz. It worked fine until recently. After connecting to a wireless network for a few minutes, it then begins to sporadically drop out. And after losing the connection, it can't detect any wireless networks. Turning off the card, restarting the computer, letting it sit for a few minutes... signals come in and out, but then drop again.
I'm using OS X.4, so this isn't a software problem, the OS, or caused by an update. The antenna also isn't faulty. The computer reads the card as being fully functional, but just doesn't detect any wireless networks. I've exhausted all software solutions and now can only conclude it's a hardware problem. Given the symptoms I've described, would the best idea be to replace the card altogether?
View 5 Replies
View Related
Jun 26, 2007
i have top of the line Airport Extreme with the N enabled on my MacPro yet i get a Crappy Signal what gives? anyone else have this problem?
View 11 Replies
View Related
Feb 11, 2009
I'm all of the sudden having problems with the airport connection in my MacBook Pro laptop at home. In areas where it used to work---a week ago--the signal comes and goes from 4-5 bars to all of the sudden none and I am disconnected from my wireless internet. Nothing else has changed (cable modem, wireless router).
View 4 Replies
View Related
Jan 15, 2009
I just upgraded from 10.4 to 10.5 and my Airport meter is now reading 2 bars instead of 5. Same router, same position, different OSX only.
View 2 Replies
View Related
Oct 27, 2010
I have my AE set up in my office where three computers and two printers are picking up its signal just fine. However, I have a computer in another room that is only about 30 ft away from the AE router and sometimes the signal is very week while other times it won't connect at all. Yet, I can pick up other networks from other houses just fine.
View 5 Replies
View Related
Aug 12, 2009
Can I add an Airport Extreme to a network to get a stronger signal? Im using my roommates wireless (WAP) signal with only one bar. I have the white Airport Extreme that looks a flying saucer. (802.11g?) to his Linksys wireless.
View 2 Replies
View Related
Nov 5, 2009
I am having random slowdowns on my connection speed using Airport (nothing to do with the notorious performance issues which I also suffer).
My appleTV and my HP 2140 get 90% (it's right by the router) and 80% (floating around the same floor of the house) signal strength respectively, download speed and throughput seems very stable on both, however on the iMac (that's about 10 feet away from the router) the signal strength is 28% ! this is incredibly low and even though it does not always hurt download speed it does hurt the total throughput when sharing files over the network. Also the SNR (signal to noise ratio) is incredibly low, below 30 all the time.
View 16 Replies
View Related
Dec 24, 2009
I want it to provide a boost to the signal in the basement for my touch. As well as stream music from my laptop. The issue Im having is that the music keeps on cutting out. The newer one this is listed under is working fine, but on the other side of the room, it is setup to Extend the 'n' network (which I assume means allow my laptop better signal in the basement.)
The older one is on a b/g network, which I setup as a WDS network and then setup the express as a WDS relay, which I assumed would provide signal strength for the b/g network in the house (so we are running b/g & n). But setting it up as a relay it still loses connection with the laptop (I am assuming this is with the b/g network itself) and I believe that the touch's WiFi connection also drops with the music, because it is all the b/g network.
The b/g network trickles into the basement, but I assumed with the b/g touch setup as a WDS Relay, that it would strengthen the signal for my touch and ALSO keep the signal strong between the laptop and the express (Im guessing they are talking over b/g). But after being setup as a WDS relay the music is still dropping, and I only assume the touch's wifi signal is dropping as well! I also had to setup the ENTIRE b/g network as WDS because I did not get an 'extend range signal'.
View 1 Replies
View Related
Nov 10, 2010
here's the run down: today I moved into a new place with two roommates. They have a wifi internet connection set up (modem + dlink router). I have been given all of the info regarding log ins and passwords. My Airport is telling me I have perfect reception and that I have a very strong signal. Yet, there is no internet (when I open Safari it tells me I am not connected to the internet). I've had this problem before, but it is usually resolved by restarting the modem or the router, by restarting my computer, etc. And here's the kicker: I am using, right now as I type, someone else's wifi connection... yet I accessed it with the same password. It's a very basic password (12345). I thought maybe this was our unit's connection, but I actually unplugged the modem and continued to use the internet with this connection. The problem is that this connection is very slow and rather useless. I'm actually able to use 3-4 of these with the same password (12345). One of them is called 'dlink,' the name of our router. But our connection is supposedly under 'Nicks,' my roommate's name).
View 1 Replies
View Related
Jul 30, 2009
So this is my network set up:
A) Cable Modem connected to ethernet cord to new Airport Extreme Base Station.
B) Three Airport Expresses located around my house set on extending the network.
The airport extreme station is in the master bedroom and the room I am in is approx. 15-25ft away (thru a wall of course). I ran iStumbler and am getting ~42% signal and 23% noise from the main airport extreme. I am getting about 49% from one airport express with ~15% noise, ~42%/17%, and ~45%/15% from the last. Sometimes they can drop as low as 35% signal... This is not prime. Now, I do get better signal during the day, so other networks could be interfering.
I have checked local networks and their respective channels, and moved mine to an all time random number of 3. The other networks are mainly on channels 6, 8, and 11. Before I moved my network to 3, it was on channel 11. I get the same signal/noise before and after the channel move. Finally, to finish off the description... This current computer is located on the third floor. The main airport extreme is located on the third floor as well, with a relay airport express right outside the door of the master bedroom. It relays to the other 2 airport expresses. (it is also a regular airport express). Currently, all Airports are set at a Multicast rate of 2mbps.
View 1 Replies
View Related
Nov 22, 2009
i am trying to get my airport extreme to receive a wireless signal and send it through a ethernet cable to my computer. how would i go about doing this?
View 2 Replies
View Related
Jul 5, 2010
I currently have a Airport Extreme in my living room, I'm trying to boost up the signal in the rooms. Is there a way that I can use Airport Express as a repeater in the rooms via wireless and not via ethernet? I would like to use Express as a signal booster not to stream music
View 1 Replies
View Related
Sep 27, 2009
my Mac Pro has a very weak wireless connectivity � 4-10% packet loss on average, so I want to try to upgrade it's Airport antennae (I've had the same issues on my PC before I bought Mac Pro, I fixed them by upgrading the antenna).
Does anyone have any experience with external antennae for the built-in Mac Pro Airport card?
What are the plugs in Airport called? (RP-SMA � is that right?)
Are there any converters to RP-TNC, so I could plug a normal external PC antenna? Will there be any problems?
View 8 Replies
View Related
Nov 4, 2009
There are times that my signal are fading. What do I need to boost up my signal? I had an Imac Intel core duo which i bought last year.
View 7 Replies
View Related
Dec 25, 2009
on my new second hand ibook the wireless is really poor, 50% of the time it cant even find it, im using a bt homehub which on the pc it can run at about 6mb/s but the mac runs below 1 although last night it strangly went up to 5 for a miniute or two, i have tried making sure the airport card is in properly and the connector i assume is the ariel?? seems to not plug in very well? a little loose ? do i need a new aiport card?
View 2 Replies
View Related
Jan 4, 2010
I made a deal with a neighbor where we share the cost of internet. We use a wifi network and I use my MBP in my office and get 2, sometimes 3 bars of wifi. I wanted to extend wifi to the rest of the house and also be able to plug in my printer so I bought an airport express.First problem I'm running into is that where my 2009 MBP 13" laptop gets 2-3 bars, the router doesn't even SEE the wifi signal from the original D-Link Router.
View 3 Replies
View Related
Mar 20, 2010
With my MacBook Pro sitting on the desk right next to my Airport Extreme Base Station, I get, according to iStumbler, a varying signal strength between 50 and 75%. I see the same with my wife's MacBook. I also have an Airport Express in another room set to "Extend a network" and I see about the same there. Shouldn't the signal strength be higher?
View 2 Replies
View Related
Jul 6, 2009
I have a MacBook, with OSX 10.4.11. It uses an AirPort Extreme (0x168C, 0x86) and it connects to a Linksys router which is attached to my cable modem in the basement. Approx. 4 days ago I started noticing that the signal strength would vary, and then drop off all together. I have reconfigured my router, downloaded the new firmware for it, and been online chatting with Linksys techs all day. We have had no problems for months with this router, or with signal strength. My wife brought her MacBookPro home this evening to see if her machine would connect to our wireless network. Fired it up and no problem. Her machine, using the same airport card in it, had no problem with signal strength.
View 4 Replies
View Related
Dec 1, 2014
I've spent the past few hours attempting to connect my new Windows 8.1 laptop to my iMac's Airport signal without any success. I was able to do this very thing using Windows 7 on an old laptop. From what I've been reading, it seems that the ability to connect to networks secured with "WEP-Shared" type security has been removed in Windows 8 because of the fact that it was outdated and insecure. It's great that Microsoft is trying to force individuals to be secure, but unfortunately the iMac's airport utility does not offer any alternatives.
Info:
iMac
View 1 Replies
View Related
Sep 11, 2007
I've recently converted to mac and replaced my 8 month old Vaio AR11s with a new white macbook(2.16ghz). Recently I am having all sorts of problems with the wireless. I've been reading this forum for a week of so now and realize that I am not alone with my WiFi woes. My problem is the fact that my wireless intermittently drops and although the signal strength is still showing full I have no internet connection until i turn off and on the airport card.. this happens on both psu and battery!
I have tried installing the 2007-004 update, deleting the airport.plist file and the 2007-002 update and it appears to fix the fault for a while but then it comes back. I' ve also messed with enable/disabling frame bursting,different channels on my netgear wnr834n router but my other mac(using ethernet, bought a 24" imac tuesday!) and wifes vista laptop (wifi 802.11g) are fine so I have ruled out the router.
View 24 Replies
View Related
Sep 19, 2009
I have finally retired my 13 inch macbook i've had for over 3 years. I bought one of the unibody 13" macbook pros and did a clean snow leopard installation, then upgraded to 10.6.1. Since then my mac experience has gone from bright sunny days to death and doom.
My airport is the major issue, it keeps dropping signal and doesn't pick up my netgear router. it works for 5-10 minutes then just looses it by itself. i try and see if there is an update or something for it but it crashes the airport and i have to switch the airport off and then on again. This is along with all my favorite snow leopard/13" mbp issues which include but not limited to the laptop freezes, hangups, and just failing to come out of sleep mode!!! most of these issues requires me to force restart the machine. I'm now back to my old laptop seeing that I'm struggling to connect wirelessly.
View 5 Replies
View Related
Aug 19, 2010
I noticed today that the UK price of a refurb Airport Express is now �55. Last week this was �66. Anyone think that the Airport Express (and maybe Extreme), will be getting a revamp soon, hence the price drop? Do the Airprt range get anual updates?
View 2 Replies
View Related
May 18, 2008
I have a set top box that has a router attached to it (Siemans Gigaset SE587), this in then attached to my Airport Extreme.
After some minutes i lose connection. I have tried changing Channels which allows me go back on line again, but i think its more a case of it working after every time i restart my Airport. and have even reset the Airport Extreme to create a new network.
The loss of connection has nothing to do with my isp because I am currently directly linked into my mac using the ethernet into my mac . And no connection drop.
Does anyone have a clue what this might be. I am sure my Airport is in good working order, I say that because it was working fine before my isp change.
And when it is able to stay up its working very well.
View 1 Replies
View Related
Jan 28, 2006
Is there any way to improve the wifi signal acquisition on my 12" g4 powerbook?
I'm noticing that the 14"Ibook I'm comparing my PB to get a better signal sitting side by side.
View 2 Replies
View Related
Oct 25, 2006
Just installed an Airport Extreme card in an iBook G4 (running Panther). Signal strength within a few feet of the wireless router (Netgear) is usually high to medium. But when I leave the room it's in the signal drops all the sudden. I haven't had much experience with wireless networking, so I'm not that familiar with this. We do have a lot of cables and wires related to the computers in the main room where the router is, could that be "blocking" the signal from outside that room?
View 6 Replies
View Related
Jan 25, 2007
I live where there are city-wide WiFi connections. I actually live a block or two from one of the routers. The only problem is that my powerbook 12" has the hardest time picking up a signal, in fact I often have a hard time picking up wireless signals unless I'm right near them.
I realize this is one fault of the 12-banger, but it's almost as if mine sucks more than usual. Anyways, I know there is a way to extend the wireless capabilities. I've seen hacks where an antenna is actually soldered on, which is a route I would rather not take. If I had a windows machine there are several USB adapters to extend the range. Are there any of these that will work with a Mac?
View 2 Replies
View Related
Mar 31, 2007
When I transfer large amounts of data over my Powerbook's wireless, I lose my bluetooth connection to my keyboard. Also my wireless signal decreases. Is there some way to fix this? I'm trying to backup a drive to my windows pc in the other room.
View 3 Replies
View Related
Jul 17, 2010
I just bought a Dynex 26" flat panel tv and hooked it up to my mac g4 using VGA cord. I selected VGA as the input with the TV's remote, but after the initial Apple icon shows up when I start the Mac, the TV then displays the "No Signal" box. I do not have the TV hooked up to my digital cable box, as I have no connectors for that. I only want to use it for my Mac. Thanks for any help.
View 4 Replies
View Related
