I have my AE set up in my office where three computers and two printers are picking up its signal just fine. However, I have a computer in another room that is only about 30 ft away from the AE router and sometimes the signal is very week while other times it won't connect at all. Yet, I can pick up other networks from other houses just fine.
View 5 RepliesCan I add an Airport Extreme to a network to get a stronger signal? Im using my roommates wireless (WAP) signal with only one bar. I have the white Airport Extreme that looks a flying saucer. (802.11g?) to his Linksys wireless.
i am trying to get my airport extreme to receive a wireless signal and send it through a ethernet cable to my computer. how would i go about doing this?
View 2 Replies View RelatedI'm using an airport extreme (latest firmware) with 10.6.3 on a mac pro and a macbook pro. The mac pro is wired the macbook pro is connected via wireless.
I constantly have signal drops. While the airport extreme seems to stay online (green light is sold) the cable modem always resets itself.
I can't figure out if this is because of my Optonline service or due to my router (airport extreme). Cablevision states nothing is wrong with my cable internet connection and the issue may be with the router. I've tried three different modems from them and they've supposedly checked everything (wires, signal, etc). I still think it has something to do with them. I'm hesitant to try DSL as it is slower (no fios here yet).
I don't get how it can be the router if both my desktop and laptop lose connection to the internet at the same time if they happen to be connected online at the same time.
Is there anything I'm overlooking in regards to the airport extreme? Should I trash a particular preference or try a different setting?
I'm kind of desperate at this point since it is highly annoying to constantly get knocked offline more than 5 times a day.
With my MacBook Pro sitting on the desk right next to my Airport Extreme Base Station, I get, according to iStumbler, a varying signal strength between 50 and 75%. I see the same with my wife's MacBook. I also have an Airport Express in another room set to "Extend a network" and I see about the same there. Shouldn't the signal strength be higher?
My mom has a Compaq Presario CQ60 (here).
I just set up AX, and my iMac and Macbook Pro hook up to it wirelessly with ease. But the PC will connect, but refuses to connect to the internet.The network securtiy is WPA2 - Personal.
I've powercycled a few time, with no avail.
Is there a missing driver or something?
OK I know this can be done and have searched many forums and I cannot find the whole walk through on the process!!!
I have the Airport Extreme one version back without the dual antennas and I'm trying to make up for that with my old linksys router. I want my airport extreme to transmit wireless N only! and my linksys to transmit wireless G only!! configuration setting to make this happen??
I own an AirPort Extreme (Dual-Band) and a MBP (2.2 SR). When I hold option down and click the AirPort icon in the menu bar, it shows the transmit rate and the channel its on. Mine says it's connected to channel 2 and I'm getting 104 TR. Why am I not connecting to the 149 channel?
View 1 Replies View RelatedI have a 1.5TB external HDD that I am using with my iMac. But I have just added a MBP, so now I have two computers that need backing up. I was thinking of time capsule, but someone suggested I just get an airport extreme and hang the 1.5TB drive off of that. Is that do-able? But also the MBP only has 2 USB ports (my old Dell had 4). If I got the extreme, could I split the USB port and have both a HDD AND a printer off the extreme? Now that I say this out loud (or type outloud), this seems unlikely, but I thought I should check.
View 3 Replies View RelatedI'm trying to connect a D-Link webcam to my Airport Extreme. Could someone give me basic instruction on connecting this cam to my router?
I've binged/googled for this, and although i found some instruction it really didn't base it on the D-link. and i'm not sure how similar it gets.
I just purchased an Airport Extreme and it works wonders with our computers and phones, but when I tried setting up my XBOX 360 to XBox live I keep getting an error saying that I need to enable my UPNP to use all features of XBOX live. Anyone know how I can enable this on the Airport utility?
View 1 Replies View RelatedI need to set up a Macbook Pro, Dell Laptop, and HP Wireless enabled printer to my home network. I have an Airport Extreme. Can this be done without having one of the computers hard-wired to the router?
View 3 Replies View RelatedMy Airport Extreme network is working fine. The problem is that I'm sharing a hard drive which works fine with the Macs but my obligatory Windows XP computer won't see the hard drive. I have it connected to the network wirelessly and it shows as connected in XP Network places but how do I get it to see the hard drive which I have connected directly to the Airport Extreme Base Station?
View 2 Replies View RelatedI just bought my first Mac from ebay i'm a new user and don't know much about macs, I was using my ethernet to surf the web until my belking router comes in. So this is what I have done so far my desktop is wired to the router running XP the connection is fine and my setup is a WPA, my macbook is running 10.5.6 Lepord my router says the MB is connected to the router but I'm unable to connect to the internet. TCP/IP is set to DHCP my airport says status on, and that it has a self-assigned IP address and may not be able to connect to the internet I've already have my MB set to share web, internet, files & printers on my network. Is there something i missed or i'm doing wrong I called belking and got no problems with the router we used many setup changes and I ran a hardware test on my MB and no problems were found.
View 9 Replies View RelatedTrying to connect a new Airport Extreme Base Station to my iMac. Was hoping I could do so without connecting the AEBS to the imac via ethernet--is that possible? Why i try to do so, AEBS setup asks for my DHCP settings,etc.. If I connect AEBS to the computer via ethernet, will that work and will I be able to establish a network? Sure isn't going the way the "easy instructions" claim.
View 1 Replies View Relatedi've just got my sister a emac G4 1ghz i installed the airport extreme card from my G5 cos she wants it in her bedroom but it's not connecting to the router, my router is a Thomson TG585 V7 i never had this problem with old airport, it only seems to be with extreme although the card was connecting to the network from my g5 was basically inches away from it, the Emac is on the floor about 2ft away i goto connect and it just keeps timing out, i've made sure the wpa key is correct and even tried manually entering the network config details but to no avail, is there any hope?
View 2 Replies View RelatedI apologize in advance if this has been answered before (I couldn't find an answer using search). I have an Airport Extreme wireless network in my home that works great. I just got an xbox 360 with the latest wireless adapter ("N" type) and when I try to set up the xbox to work wirelessly, the setup "fails" - xbox either can't "see" my home wireless network or else can't attach to it. Any suggestions how I can fix this problem?
View 7 Replies View RelatedI have just installed an Airport Extreme Card in my G4 iMac. I can't get it to connect to my wireless network via a Linksys WRK54G router. When I enter in my network name, it doesn't recognize my wep password. I have two PCs running fine off this network.
View 1 Replies View RelatedConnecting a router to Airport Extreme: Will it slow down the internet access to all the computers more? I wanna hook up my Mac Pro, iMac via Ethernet and my PowerBook will be wireless. Is it gonna effect my speed?
View 12 Replies View RelatedI have the newest AirPort Extreme that transmits simultaneously in 2.4GHz and 5GHz. It's been great. My speeds have jumped 2-3x what they were before I upgraded to this router. Now, I'm getting 28-30MB per second download speeds. Before this I was getting 8-10MB per second.
But, I have a problem. My MBP connects great to the AirPort Extreme (802.11n at 2.4GHz or 5GHz). One PC desktop works great with the AirPort Extreme (via Ethernet). And, I have another PC laptop connecting at good speeds (802.11g). But, I have one other PC that sees and connects to the Airport Extreme signal (802.11g) but nothing happens. It's like a garden hose with very little to no water. The signal strength is very strong and, again, the computer DOES recognize the signal. It's an XP desktop (4 or 5 years old) with an 802.11g card inside.
Any thoughts as to why I have this problem with this one computer? It connected fine with my prior wireless router. It's a new problem.
By the way, the Airport Extreme is setup with all of the normal defaults and "automatic" settings, WPA2, etc. My cable provider is Comcast and the router gets it signal from a new modem. There are no other
I need to know how I can set up a system so that I can use the printer and browse the internet wirelessly on the MacBook Pro and have the non-wireless PC connect to the internet and use the printer as well.
It sounds confusing, so hopefully one of you guys will be able to understand it and maybe quickly draw a labeled diagram to show me.
I currently have Qwest DSL and have the 2wire 2700 hg modem. I have attached the picture of it. I currently have a Windows XP computer that is now a 2 1/2 year old computer (blah it was a hand me down). The Windows XP PC is currently hard-wired to the modem. I now have the 802.11n version of the AEBS. This is going to be used for my current Macbook. I have an office downstairs so I will be doing wirelessly. I want to use the 802.11n only option with my Macbook. Also another reason I want to disable the 2wire built in wireless feature and have it replaced by the AEBS is because Qwest is not doing anymore firmware upgrades for the 2wire 2700HG modem. By the way, my family sometimes visit and use 802.11g only on the devices they use. I know AEBS supports that. I just hope 2wire wireless feature can be disabled without no issues. These are the things I am wondering:
1. Has anybody run a similar setup to mine? Any things I should consider? Any pros or cons?
2. Should I turn off the 2wire modem firewall and turn on the firewall option on the Airport Extreme base station or vice versa?
3. Should I leave alone the NAT feature on the modem be left alone?
4. Does this kind of setup have to be run in "bridged" mode?
That's all the questions I have for now. I hope someone can help with this. I looked and looked for a similar question to these questions but could not find a recent forum post to mine.
Reading through the forums I haven't got a clear picture on whether this idea will work, so I was hoping someone could clear it up for me. It seems to have been clouded by people having problems with Airport-connected drives in Snow Leopard.I want to partition a hard drive and connect it through USB to an Airport Extreme. Then I want to use each partition as separate Time Machine backups for my iMac and MacBook.1. If connecting a partitioned hard drive, will all partitions be accessible through Airport Extreme?2. Can I use partitions connected in this way as Time Machine backups?3. Will there be problems if both my iMac and MacBook try to backup to the Time Machines at the same time?
View 4 Replies View RelatedOk, I feel like a doofus, but I need some help if someone is willing.
I bought an Airport Extreme and installed per instructions on the Mac partition. The Extreme replaces an Express as the base unit, the express now extends the range of the network (and is now connected to my stereo system). So, the "new" network that was set up has the exact same name as the old one when it was just the Express.
Everything works fine on the mac side. When I go to my Win XP side (Boot camp) it sees the network but says it cannot connect. To put is simply, I can't remeber what I need to do. I haven't had to mess with this stuff since I set it up almost 2 years ago. Do I need to set up a new network?... I am just drawing a blank. Is keeping the same name for the "new" network part of my problem?
I cant connect my guitar to mac pro 08. I see the signal but dont sound. Please how I cant with software?
View 2 Replies View RelatedI have the white macbook and I got it a little less than a year ago. For the past week, sometimes when I go on the internet (firefox or safari) it just won't load. Like the blue bar that shows you how much has loaded isn't even visible and it will just say "connecting". But when I look at my airport icon that shows me how many bars of internet I have all the bars are full so I have internet connection. It is not just one type of internet browser because it does it on both safari and firefox. And it is getting really annoying because I will be browsing the internet and it just won't load or connect at all. Even if I wait.
View 3 Replies View RelatedWhen i connect my hdtv to my mbp via vga (using mini displayport vga adapter) I am only achieving a 1080i signal. I did some research and I found that there are two 1080 resolution options in leopard, one being 1080i and the other being 1080p, you simply have to turn the display options on in the menu bar and then select the one you wish to use.
With this new found knowledge i found the two resolution options and tried them however, I found that one of the 1080 resolution options outputted 1080i whilst the other outputted 1050, despite clearly saying 1080. This has me baffled! Is this due to me using a vga cable and has anyone had similar issues? Additionally, is it possible to achieve a 1080p signal from a mbp? Mine is the late 08 model if that makes a difference.
Simple question: Of the new features in the new AirPort Extreme Base Station, which of these could become available to the old AirPort Extreme Base Station via a software/firmware update? I have to think that at least some of the new features don't actually require new hardware. Just trying to figure out if I want to shell out $179 for a new AEBS when my current AEBS works pretty well as it is.
View 21 Replies View Relatedso the other day i opened my computer and it wouldn't connect to the internet. it had been working fine before that and nothing had changed, it just stopped connecting. I have full signal and can connect to the network, but my internet signal on the top bar has an exclamation point and says "Alert: no internet connection." My roommates can both connect with their computers so i dont know the problem! i've looked for solutions on other forums and havet tried deleting "airport" as a source and then re-adding it, deleting the system configuration folder, renewing the DHCP lease, nothing works.
Info:
MacBook, Mac OS X (10.6.8)
I just got a time capsule and replaced my extreme with it then added my 2 expresses to the network. Was getting 28-33mbps download speeds using speedtest.net to test now i'm getting only 4-6mbps. WTH!!! Also the transfer rate for backing up my macbook to the tc drive is ridiculous!!!
View 2 Replies View Related