So I have Windows 7 installed with bootcamp, and of course OS X. But, when I turn on my computer, if I do not hold down the option key, my MBP automatically loads Windows. Is there a way to change it so that it will automatically load Mac OS X if I do not hold the option key?
View 3 RepliesI have change my C: drive name (was in past "Untitled"... eww) and it shows up changed as this new volume name on both my Mac and Windows sides. I also changed my Mac side harddrive name and it shows up changed on my Mac and PC sides. So this is all good and correct.
But when I boot up holding option, and am able in choosing which volume to use (Mac side or Windows Partition) the Mac side choice will be named whatever I have named the main drive which is what I expect. But the Windows Partition will just be named "Windows". It will not be named what my C: drive is named (which is what shows up on my Mac side desktop and what I want it to show up as).
This probably all sounds silly and of trivial but it would mean much to me if any one knew a way in changing so that when I choose which drive to use "Windows" will show up as C: "Drivename" would be much appreciated. If this could be a complicating issue I will let you know that the harddrive name for my Windows side contains a ' if that would cause a problem (but my Mac side name does too so it doesn't make much sense to me).
I recently used bootcamp to install windows 7 onto my computer. Now whenever i turn on my computer it defaults into windows. How do i change that??
View 3 Replies View RelatedI searched but didn't find anything. Can I do this? I just want to change the hard drive picture for windows.
View 8 Replies View RelatedBased upon my inability to update my iPad2 with its latest iOS 5.0.1, I was encouraged to and did change my DSN preferences in system preferences to the two Google ones (8.8.8.8 and 8.8.4.4). I think what I replaced were the original preferences put in place by my Internet provider, Charter.net. Are there adverse consequences of changing the DSN, and should I change them back to those placed there originally?
Info:
Mac OS X (10.6.8), Safari 5.1.2, iPhoto 9.2, iTunes 10
My internet starts slowing or quits, when I go into Networks in Prefs, it has changed to a different network (usually a neighbor that shows up). I reset the network and use the lock. But I have to do this several times a day?
View 5 Replies View RelatedThis issue has probably when addressed in the past but I am having a problem with it now and any help would be greatly appreciated.
Currently, whenever I try to access Apple Mail (OS X 10.6.4), I get the spinning ball and I find that mail is not responding. Does anyone have any idea of what is going on or how I can reinstall mail?
My Flash Player preferences (in the preferences pane) keep returning to the default settings after i have made changes to the settings. It seems to take about a week between the time i set the preferences till they return back to the default settings. As an example, about a week ago i set the "Storage" tab to "Block all sites from storing information on this computer." Last night i checked the preferences and this same tab had been changed back to the default choice, "Allow sites from storing information on this computer." Same thing for the "Camera and Mic" tab, i check the "block all sites", then in a week or so it goes back to "Ask me." This is occuring across all the tabs in the Flash Player preferences.Â
Info:
MacBook
Pro, Mac OS X (10.7), 2.2 Ghz Intel Core i7
I just installed a Mercury Accelsior RAID drive in a PCI slot in my Mac Pro. It appears on the desktop, but I don't want it to. In Finder > Preferences I have "Hard Disks" unchecked, and "External Drives" checked. Does the Mac Pro see this as an external drive?Apparently so. Is there a way to specify that this one particular external drive shouldn't display on the desktop?
View 3 Replies View RelatedI would like to know whether it is possible to change the smart folders preferences in what to search by default. What I mean is in the "window" spotlight, when you search on it, by default is searches on "This mac" and on "Content", my question is whether this is changeable. I hope you understand what I was talking about, if not please ask.
View 2 Replies View RelatedI have an iMac OS X 10.7.3 (purchased in late 2010) with all updates current. I use AirPort to connect to my Linksys router with a WPA2 password.
Nearly everytime I wake my computer from sleep, my wireless router is disconnected, even when I have set my settings and clicked on the lock to prevent further changes. My router always shows on the list of available connections with full strength, but it is more often than not extremely difficult to get it connected again. It says "Could not join "myRouter". A connection time out occured."Â I usually have to use the assistant and go through the steps, which usually includes re-typing my password four to five times before it agrees that I know my own password (which is fairly simple to type, I can't possibly be entering it incorrectly that many times).
I downloaded and installed an update [URL] that quote: "resolves an issue that may cause an iMac to not automatically connect to a known Wi-Fi network after waking from sleep. It is recommended for all iMac (Late 2009 or newer) users running 10.7.3." Â
I tried setting a new location, and set the DHCP setting under TCP/IP to be manual. I was successful in connecting to the internet that time, and locked the settings to prevent further changes, yet the first time my computer woke from a sleep, the lock was unchecked and the settings were changed back to automatic. And I was disconnected yet again.Â
This has been going on for months, but in the last couple weeks I have found I am now unable to lock the lock to prevent changes, no matter if my Location is set to automatic or one that I have created. Really looking for resolution as this is wasting so much time, I am on and off the computer multiple times a day.Â
Info:
iMac, Mac OS X (10.4.11)
I recently changed my apple ID password and now I can't log in to the icloud system preferences on my iMac or the App Store on my iMac. Everything else is fine with the new password; icloud.com, itunes, ipad, iphone, MacBook Air. Have tried creating a new user account but get the same messages which vary from "unrecognized user or password" to "problem communicating with icloud, try again later."
Info:
iMac, Mac OS X (10.7.4) Lion
In my attempt to install Windows XP via Boot Camp, I accidentally inserted an SP1 disc instead of the SP2 disc that I have. The installation proceeded to the point where it does for most who attempt this: the screen where you are prompted to press ENTER. I could not proceed and therefore restarted the iMac and held down the mouse button upon start-up to remove the CD.
HERE IS THE PROBLEM:I can not boot into OS X because the keyboard shortcuts (those that might allow me to select which partition to boot from and/or reset PRAM) seem to be disabled. Instead, a reboot always ends at a black screen with a blinking DOS-esque cursor, or the prompt: "No bootable device -- insert boot disk and press any key."
I have attempted inserting my SP2 disc at this point, to no avail. My keyboard seems to be disabled, as if the SP1 install proceeded just enough to establish itself as the boot drive without drivers for the keyboard. I've tried using all 3 USB ports, disconnecting other USB devices. Oddly, my bluetooth mouse works to eject the CD on reboot...
I had a Windows based PC a couple of years ago that had crashed. So recently i tried to put the files from my old hard drive from my Windows computer to my Mac. In order to keep track of what i have copied and what I haven't i thought it would be good to delete the stuff of my windows hard drive once it was copied. However, it doesn't let me delete anything of the Windows drive since it is set to read only. Is there a way around this? i've tried everything i can think of, but haven't found a soluti
View 1 Replies View Relatedjust trying to get back into Windows 7 after installing it via Boot Camp. Only thing is that holding down the option key during restart does nothing, and although the partition in which Windows 7 is installed under shows up in finder, I am unable to view it in system preferences so that I can boot from it. Any advice?
View 3 Replies View Relatedi installed 4gb (2x2)of ram in my alum macbook pro 2,4ghz 15" and in the 1 first time i didn't took off the battery but it went well and booted ok, after that i turned off the computer and the next time keeped making noises.
View 1 Replies View RelatedI have an '08 Octo 2.8.
I created a Boot Camp Partition (an entire drive, actually) and installed XP. The install went off without a hitch ... Except, having rebooted to Mac OS X (10.6.1) there is no way to boot Windows again. Going to Preferences->Boot Disk shows no Book Camp bootable drive.
I have the latest generation Mac Pro with the stock drive. That's the 300GB WDC drive. It seems a little slow in terms of response time and at times loud. I have been eyeing the Seagate Barracuda 7200.11 ST31000340AS 1TB 7200 RPM 32MB Cache SATA 3.0Gb/s Hard Drive. I could either replace the stock boot disk with the 7200.11 and use the stock disk as a scratch disk. If so, what it's the best way to move over my boot data from one disk to another? (if possible)
Or I could just use the 7200.11 to store my applications and run them from that disk. Is that as easy to just copy over the Applications to the other drive? PS: I use my Mac Pro for Final Cut for HD (audio/video) editing and Web development (Photoshop, Textmate) and run Windows under Parallels for IE6/7/8 testing.
I have a Mac Pro from 2006, and it has hard drives in all four bays. The first drive is the 250gb default drive from Apple. The rest are Seagate and Samsung. The setup is: 250 (Mac) / 320 (Empty) / 750 (Backup) / 1000 (Media) The 250gb is getting full every once in a while, and I might wish to replace it with another 1000 or even the new seagate 1.5TB one. Whatever .. but since it only has the OS + Program files and some stuff in /home, I want to use the bigger drives for the data. And use the 320gb as the boot drive.
Move (clone) the 250gb to the 320gb Reboot and boot from the 320gb, replacing the 250gb. Which I can then make empty and use until I replace it with a 1000gb drive. I can use CCC to clone the 250gb to the 320gb. But is that enough? How can I then reboot and have the 320gb as if it was the 250gb,. And how can I be certain it is booting from the cloned 320gb, or the original 250gb once I am back into OSX? And can I then repartition the 250gb and still reboot, or will this ruin the master boot record or boot menu setup, etc?
I have no experience with this (yet). And am afraid to end up with a non booting system and a long night of trying to restore using the retail disk for leopard. I hope I am making sense. I just want to move my boot to the 320, and get more space for my boot hd.
I am looking for a used Mac for my folks, and someone has posted an imac that they have converted to a PC, having change the master boot record. They say I have to take it to the apple store to get it changed back, but couldn't I just start it up in target disk mode, and reformat the internal drive use carbon copy cloner or something like that?
View 9 Replies View RelatedInternal hard drive crashed, could not repair. Lion installed on external boot drive, using Forklift to recover files. Cannot access the files of other users from internal drive. How di I change permissions on the internal old boot drive so I can recover the files? Â
Info:
Mac OS X (10.7.4)
ok, i installed 4gb (2x2)of ram in my alum macbook pro 2,4ghz 15" and in the 1 first time i didn't took off the battery but it went well and booted ok, after that i turned off the computer and the next time keeped making noises.
i tried put the old ram and it's everything ok, i tried both ram slots and memoryes and the 1rs booted ok alone but the second didn't, what is happening, it's the second ram damaged or have you another explanation?
I am looking for a used Mac for my folks, and someone has posted an imac that they have converted to a PC, having change the master boot record. They say I have to take it to the apple store to get it changed back, but couldn't I just start it up in target disk mode, and reformat the internal drive use carbon copy cloner or something like that?
View 1 Replies View RelatedI have my laptop which is Powerbook G5 version 10.3.9 Panther. For the last two months the PB didn't boot up and it was beeping three times and white lid blinking.After going through internet i notice the problem was RAM and i need to change it. I bought another RAM 1GB (the old one was 512MB) and inserted it in the lower RAM slot.
Thank GOD the mac boot up properly and everything was fine. I charged it to full capacity and shut it down.The next day i started my mac as usual but surprisingly it beeps three times and it didn't boot up again.I open the RAM cover tried to remove it and replaces it again but it didn't work out and i am totally devastated and i don't know what to do any more.The brand name of the RAM i used is TRANSCEND.
This is the 1st time i got a Mac , i bought a black Macbook 2.4GHz some days ago .
I installed Windows Vista Ultimate using Boot Camp , and all went smoothly .
Only 1 prob is when restarting , i have to wait too long for the Windows to log on , i think about 1min with the black screen.
And if i want to boot in Mac OS , i have to push down the D button or the Alt, it takes quite a long time too .
So do you guys have any solution to this problem ? I want to get rid of the waiting time, way too much.
And do you know how to make my Macbook jump right in the choosing section when it starts ? ( so that i dont have to push down any button when it starts )
Basically I have three partitions on one 500Gb HD and it's been working nicely for 4 months until XP decided that it didn't want to boot anymore.
View 2 Replies View RelatedI installed Everest on my MacBook Pro. It shows me, that the CPU clock is not 3066MHz (standard) but it changes very often. Sometimes I have 1500MHz, 1800MHz (...) or another CPU Multiplier. The same with the front side bus. Is this normal? I don't think, that the Core 2 Duo have TurboBoost or so?
View 1 Replies View RelatedI recently used boot camp to install windows on my intel iMac. It all worked great, but now I'd like to give it more hard drive space on it's partition. Is there any way to change the partition size without having to erase the partition and start over?
View 9 Replies View RelatedThe toolbar color in Mac is looks very dark, I want to change into light color, like window, how to change the color of Toolbar in mac os 10.5.6
View 3 Replies View RelatedFor some reason my clock changes it's time on Windows and Mac every once in a while. I don't know if it's Bootcamp or VMwareFusion causing this, but for some reason it's happening.
View 2 Replies View Related