I have change my C: drive name (was in past "Untitled"... eww) and it shows up changed as this new volume name on both my Mac and Windows sides. I also changed my Mac side harddrive name and it shows up changed on my Mac and PC sides. So this is all good and correct.
But when I boot up holding option, and am able in choosing which volume to use (Mac side or Windows Partition) the Mac side choice will be named whatever I have named the main drive which is what I expect. But the Windows Partition will just be named "Windows". It will not be named what my C: drive is named (which is what shows up on my Mac side desktop and what I want it to show up as).
This probably all sounds silly and of trivial but it would mean much to me if any one knew a way in changing so that when I choose which drive to use "Windows" will show up as C: "Drivename" would be much appreciated. If this could be a complicating issue I will let you know that the harddrive name for my Windows side contains a ' if that would cause a problem (but my Mac side name does too so it doesn't make much sense to me).
This is my first post here... even though, I've read a lot of the things on this forum, but never decided to post a question 'til now... now that i bought a macbook pro that is.
Actually I have some sort of annoyance with boot camp. It works as it's intended (with windows 7, which is a miracle, because everyone complains about that combination). But whenever I boot up and press "alt" to select the hard drive i want to boot, it always shows Windows. Can i change it for something else? and, how can I do it? Both of my partitions have names of their own... they're not generic... but still, they are not working, what can I do??
i run boot camp and work on Microsoft to work with auto cad, and the volume keys and the pause and mute for some strange reason stopped working.
ive gone to control panel boot camp and turned on and off the option to use the f1 keys and still nothing. i have uninstalled the driver for the keyboard and still nothing.
So I have Windows 7 installed with bootcamp, and of course OS X. But, when I turn on my computer, if I do not hold down the option key, my MBP automatically loads Windows. Is there a way to change it so that it will automatically load Mac OS X if I do not hold the option key?
For those who have installed the Boot Camp 3.0 drivers does it resolve any of these problems with the 2009 Macbook:Low volume output from speakers, Optical output red light always on, Keyboard backlight won't turn off, Microphone not working, Left speaker louder than right speaker
Other than the ability to access your Mac drive does Boot Camp 3.0 add anything that would make it worth the upgrade?
Usually when I go to "Restart into Mac OS X" from Boot Camp's system tray icon it works fine, but just recently it has started giving me this error and not working. It seems like usually when this errors hows it's because the Mac volume is bad or missing, but I have a perfectly working HFS+ boot volume that is visible in Windows and boots just fine. I do also have a second HFS+ partition for data, but no problems with them.
I just set up my new MacBook Pro 13-inch with Boot Camp. Initially I put Windows 7 RC on it, but I couldn't get the audio control function keys to work. Figuring Win 7 is probably quirky, I figured I'd drop back to Vista for now until 7 is officially supported. (Interesting how easy Apple makes it to annihilate a Boot Camp partition. :) So now I have Windows Vista Ultimate SP2 running with no issues. All the Boot Camp drives and utilities seem to be working. However, with all the sounds cranked to max in Windows, and using the F12 key, the volume is very quiet. Probably less than half of what I can get in OS X.
I continually notice the volume balance (L-R) on my mac ibookG4 keeps changing itself. I have been working on disabling the remote access to my machine, but have been unable access the sudoers. What do you suggest? Is a malicious program or a person changing the settings? How do I prevent this from occurring in the future? Thanks in advance for your help.
Before I get flamed and etc... I have google and done some research about this issue but cannot find much about it.
I am not sure if this is a very common issue or topic but how do you adjust or modify your apple keyboard so that you can adjust screen brightness or volume? I am currently running Windows XP SP3, on a 2.4Ghz Unibody Macbook.
I reinstalled Snow Leopard on a new volume, transferred stuff I wanted from the old volume to the new volume, and deleted the old one. In disk utility, I have not been able to stretch the volume to fit where the old one was. I can't change the volume scheme. Has anyone got a method to let me use my full 160GB hard drive rather than half of it? Or maybe software that can alter it.
In my attempt to install Windows XP via Boot Camp, I accidentally inserted an SP1 disc instead of the SP2 disc that I have. The installation proceeded to the point where it does for most who attempt this: the screen where you are prompted to press ENTER. I could not proceed and therefore restarted the iMac and held down the mouse button upon start-up to remove the CD.
HERE IS THE PROBLEM:I can not boot into OS X because the keyboard shortcuts (those that might allow me to select which partition to boot from and/or reset PRAM) seem to be disabled. Instead, a reboot always ends at a black screen with a blinking DOS-esque cursor, or the prompt: "No bootable device -- insert boot disk and press any key."
I have attempted inserting my SP2 disc at this point, to no avail. My keyboard seems to be disabled, as if the SP1 install proceeded just enough to establish itself as the boot drive without drivers for the keyboard. I've tried using all 3 USB ports, disconnecting other USB devices. Oddly, my bluetooth mouse works to eject the CD on reboot...
My Mac Pro will not find it's boot volume. Each time the computer is started, the blinking folder with the question mark is the result. A working install of 10.7 does exist on the machine's primary hard drive. If I were to press the option key on boot, I can select the primary hard drive (after entering the password) and everything boots as normal. I have run TechToolPro on the volume with no detected errors, even after a volume rebuild. A Recovery HD partition is not on the boot volume. Should that matter?
I really really do not want to reinstall Mac OS X. I have hundreds of gigabytes of data in question. Any reinstall/reconfig would take days to complete.
Info: Mac Pro, Mac OS X (10.7.4), 8GB RAM, 1TB HDD
I had a Windows based PC a couple of years ago that had crashed. So recently i tried to put the files from my old hard drive from my Windows computer to my Mac. In order to keep track of what i have copied and what I haven't i thought it would be good to delete the stuff of my windows hard drive once it was copied. However, it doesn't let me delete anything of the Windows drive since it is set to read only. Is there a way around this? i've tried everything i can think of, but haven't found a soluti
So I thought I was a know it all and thought I could remove my Windows partition without reading the instructions. Typically one would do the following: 1. In Mac OS X, quit all open applications and log out any other users on your computer. 2. Open Boot Camp Assistant, in the Utilities folder in the Applications folder. 3. Select "Restore the startup disk to a single volume" and then click Continue.
However, I messed it up. Instead of going through Bootcamp assistant, I went through Disk Utility and "erased" the Bootcamp volume. Now I am not sure where I at? I erased it, but you can still see the Bootcamp volume listed. And now when O try to use Bootcamp assistant to remove the partition I get the following: The startup disk cannot be partitioned or restored to a single partition. The startup disk must be formatted as a single Mac OS extended (journaled) volume or already partitioned by boot camp assistant for installing windows. I want to reinstall a Windows, but want to start fresh.
I've an early 2008 Mac Pro which I have added a couple of additional SATA drives to; both are Western Digital Raptor drives (a 75GB and a 150GB model). I've successfully used the 75GB as a BootCamp volume for Windows XP, and it is my intention to use the 150GB one as my main OS X boot drive. I used SuperDuper! to copy the original boot drive over to the 150GB Raptor, which copied successfully. Unfortunately, this new volume doesn't appear in the list of bootable volumes in the Startup Disk preference panel. If I restart and hold the Option key down, it is listed and I can boot from it, but I'm worried about erasing the original drive whilst I can't manually select the new drive as my boot volume in the preference panel. For what it's worth, Disk Utility reports the new volume as bootable. Can anybody suggest any remedies as to how to make the new volume appear in the list, so that I can recover the older drive to use for storage?
i have a boot install of windows xp and windows 7 on two separate HD's in my mac pro and i would like to consolidate these (along with my primary mac OS) onto one single drive.
can i migrate these somehow to a new partitioned drive?
Info: Mac Pro, Mac OS X (10.6.8), 10.6.8 with 64 bit Win7 in Parallel
i installed 4gb (2x2)of ram in my alum macbook pro 2,4ghz 15" and in the 1 first time i didn't took off the battery but it went well and booted ok, after that i turned off the computer and the next time keeped making noises.
I created a Boot Camp Partition (an entire drive, actually) and installed XP. The install went off without a hitch ... Except, having rebooted to Mac OS X (10.6.1) there is no way to boot Windows again. Going to Preferences->Boot Disk shows no Book Camp bootable drive.
I have 2 partitions on my MacBook drive. One is OS X Leopard, and the other is a Windows XP Bootcamp Partition (FAT32). When I made the Bootcamp partition, I cloned up my OS X partition to a USB drive (using Carbon Copy Cloner), replaced the OS X partition with the clone (to defragment it), and then partitioned it using Bootcamp. I decided I wanted a larger Windows XP Bootcamp Partition, and so I removed the partition using Bootcamp, recloned and replaced the OS X partition with the recloned backup (to defragment it, once again), and then used Bootcamp again to partition it, this time with a larger partition size. The first time I partitioned it, everything worked great. Ever since the second time, though, when I hold option during startup to change boot volumes, the volume that once said "Macintosh HD" now says "EFI Boot." Also, my OS X partition is no longer the default partition, and when I lookt at the Startup Disk in the System Preferences, my OS X partition is not listed among them. This is the same when I look at the "Startup Disk" preferences on the Windows XP partition, using the Boot Camp application, and when I click "Startup in Mac OS X," I get the error: "Could Not Locate Mac OS X Volume."
I had been ignoring the problem, simply holding option on startup and choosing the "EFI Boot" volume. This was working fine until today, when I finally came around to updating OS X. I ran Software Update, which told me I had to restart my computer. When I did, it went through the whole updating progress bar screen for a while, and then restarted the computer. When the computer restarted, it restarted in Windows XP, so I shut down the computer, booted it up, and held option. I chose "EFI Boot" when I was given the choice, and it started booting to my OS X partition. About a minute or two after I chose "EFI Boot," the computer unexpectedly rebooted into Windows XP again. I restarted the computer, again holding option and choosing "EFI Boot," and again it unexpectedly restarted. How can I get back into my OS X partition? Is there a way I can clone my OS X partition and replace it like I've done in the past? (Note: I have MacDrive 7, and have seen an option for backing up drives on there in the past, but have never used it.) Why is my OS X partition showing up as "EFI Boot"
I have a 15" macbook pro. I got it from my college. They gave me a bunch of cds to install stuff, including windows vista, so I tried to install vista and it was giving me problems. Since I have never installed an OS before, I reformatted everything to be NTFS. So now I have a mac with only vista on it. I realized what I did after I tried to use bootcamp and it said could not locate mac os x boot volume.
I have all cds and since I just got this mac, I don't have much saved on here so if I have to delete everything to be able to have OS X and Vista both on here, then so be it. Also I have 2 other computers, both are strictly windows computers if I have to go on a different computer to download something. I am very new to Mac (only have had this for 3 weeks) so I would need to know how to get into any configuration I would need. I know I could call apple support, but I would rather get information over the internet than over the phone.
I have the latest generation Mac Pro with the stock drive. That's the 300GB WDC drive. It seems a little slow in terms of response time and at times loud. I have been eyeing the Seagate Barracuda 7200.11 ST31000340AS 1TB 7200 RPM 32MB Cache SATA 3.0Gb/s Hard Drive. I could either replace the stock boot disk with the 7200.11 and use the stock disk as a scratch disk. If so, what it's the best way to move over my boot data from one disk to another? (if possible)
Or I could just use the 7200.11 to store my applications and run them from that disk. Is that as easy to just copy over the Applications to the other drive? PS: I use my Mac Pro for Final Cut for HD (audio/video) editing and Web development (Photoshop, Textmate) and run Windows under Parallels for IE6/7/8 testing.
I have a Mac Pro from 2006, and it has hard drives in all four bays. The first drive is the 250gb default drive from Apple. The rest are Seagate and Samsung. The setup is: 250 (Mac) / 320 (Empty) / 750 (Backup) / 1000 (Media) The 250gb is getting full every once in a while, and I might wish to replace it with another 1000 or even the new seagate 1.5TB one. Whatever .. but since it only has the OS + Program files and some stuff in /home, I want to use the bigger drives for the data. And use the 320gb as the boot drive.
Move (clone) the 250gb to the 320gb Reboot and boot from the 320gb, replacing the 250gb. Which I can then make empty and use until I replace it with a 1000gb drive. I can use CCC to clone the 250gb to the 320gb. But is that enough? How can I then reboot and have the 320gb as if it was the 250gb,. And how can I be certain it is booting from the cloned 320gb, or the original 250gb once I am back into OSX? And can I then repartition the 250gb and still reboot, or will this ruin the master boot record or boot menu setup, etc?
I have no experience with this (yet). And am afraid to end up with a non booting system and a long night of trying to restore using the retail disk for leopard. I hope I am making sense. I just want to move my boot to the 320, and get more space for my boot hd.
I am looking for a used Mac for my folks, and someone has posted an imac that they have converted to a PC, having change the master boot record. They say I have to take it to the apple store to get it changed back, but couldn't I just start it up in target disk mode, and reformat the internal drive use carbon copy cloner or something like that?
This is what I've done so far: I set a Stripped Raid Set with two drives: a Seagate 500GB @7200 and the original WD 640GB @7200. Before setting the Raid, I partitioned the latter in two: a 500GB and a 160GB, so the extra space is not lost. The Raid was created successfully (using the disk utility Raid - no special hardware). So far, is this OK (specially the partition part)? Now, my question is, what's the best way to migrate all my apps and data, from the original single boot drive I've been using until now, to the Raid - so the benefits of the raid are most apparent?
a) As soon as the raid was set, still inside Disk Utility, I used the Restore function, using the original boot volume as source, and the raid volume as target. This is in progress, with an eta of 4 hours, but I can stop it at any time... is this the best way? b) Another way that occurs to me, is to clone the boot volume to the Raid using Superduper or CCC....? c) Or perhaps I should make a clean OS install in the Raid volume, and then use migration assistant or other method to bring the apps and data to the raid?Or, something else I haven't thought of...?
I purchased a new hard drive, my second Samsung 750 GB. My first one is partitioned, half for OSX half for Vista. Ultimately, I want to have a hard drive per operating system.
At first I thought the way to go for this, based on some stuff I read here on Mac Rumors was to use winclone to clone the windows partition,restore it to the new drive, and then I don't know what.I did the restore, there were errors in the log though..something about the wrong kind of partition. Basically it's become a pain in the ass, and I'm thinking there has to be an easier way.
It occurred to me, I might be able to use "Install and Archive" to move the boot volume to the new disk, moving the user files and network settings with it. If I did this would I be able to expand the windows partition using winclone utilizing the full hard drive? Or could moving the boot volume to the new disk mess up my Windows partition?
IMac with 10.7.3 and Seagate GoHlex 2TB external drive. Using the disk utility why is was not backing up.The Seagate is now asking the question "Updating boot support partitions for the volume as required". The verify disk permissions and repair disk permissions buttons are not active. My reference "The missing manual" does not cover this challenge.
Internal hard drive crashed, could not repair. Lion installed on external boot drive, using Forklift to recover files. Cannot access the files of other users from internal drive. How di I change permissions on the internal old boot drive so I can recover the files?
My Time Machine drive is failing according to Disk Utility. It's trying to fix it but is now stuck on: "Updating boot support partitions for the volume as required." It's been there for hours. How long should I wait before assuming that it's just hung and force quit Disk Utility / re-boot (possibly making the problem worse)? One answer I saw was "as long as it takes" but realistically, I surely can't just leave it running for weeks. There must be a maximum time before I should assume it's not going to work.
