I have the latest generation Mac Pro with the stock drive. That's the 300GB WDC drive. It seems a little slow in terms of response time and at times loud. I have been eyeing the Seagate Barracuda 7200.11 ST31000340AS 1TB 7200 RPM 32MB Cache SATA 3.0Gb/s Hard Drive. I could either replace the stock boot disk with the 7200.11 and use the stock disk as a scratch disk. If so, what it's the best way to move over my boot data from one disk to another? (if possible)
Or I could just use the 7200.11 to store my applications and run them from that disk. Is that as easy to just copy over the Applications to the other drive? PS: I use my Mac Pro for Final Cut for HD (audio/video) editing and Web development (Photoshop, Textmate) and run Windows under Parallels for IE6/7/8 testing.
I have a Mac Pro from 2006, and it has hard drives in all four bays. The first drive is the 250gb default drive from Apple. The rest are Seagate and Samsung. The setup is: 250 (Mac) / 320 (Empty) / 750 (Backup) / 1000 (Media) The 250gb is getting full every once in a while, and I might wish to replace it with another 1000 or even the new seagate 1.5TB one. Whatever .. but since it only has the OS + Program files and some stuff in /home, I want to use the bigger drives for the data. And use the 320gb as the boot drive.
Move (clone) the 250gb to the 320gb Reboot and boot from the 320gb, replacing the 250gb. Which I can then make empty and use until I replace it with a 1000gb drive. I can use CCC to clone the 250gb to the 320gb. But is that enough? How can I then reboot and have the 320gb as if it was the 250gb,. And how can I be certain it is booting from the cloned 320gb, or the original 250gb once I am back into OSX? And can I then repartition the 250gb and still reboot, or will this ruin the master boot record or boot menu setup, etc?
I have no experience with this (yet). And am afraid to end up with a non booting system and a long night of trying to restore using the retail disk for leopard. I hope I am making sense. I just want to move my boot to the 320, and get more space for my boot hd.
Internal hard drive crashed, could not repair. Lion installed on external boot drive, using Forklift to recover files. Cannot access the files of other users from internal drive. How di I change permissions on the internal old boot drive so I can recover the files?
I am looking for a used Mac for my folks, and someone has posted an imac that they have converted to a PC, having change the master boot record. They say I have to take it to the apple store to get it changed back, but couldn't I just start it up in target disk mode, and reformat the internal drive use carbon copy cloner or something like that?
I am wondering what kind of SSD is stock in the Rev A MBA and how much you could sell a used SSD for and also what are some good options to swap out that out for a 128GB SSD - I know the Runcore is out there - any other options?
I have just bought a X25-M SSD drive for my MBP (mid-2010). Is it recommend to clone my existing stock drive to get OSX on the SSD or should I rebuild from scratch and perhaps use Time Machine to recover all my apps and settings? Any advice appreciated.
I am wondering what was the stock hard drive speed of my PowerBook G4 12" (specs in signature). I am asking for the speed of the 80 GB ATA/100 HDD this shipped with.
sorry if this has been asked; I tried searching.Anyway, I just bought a larger capacity hard drive and am not sure how to copy the stock 160GB 5400RPM one.Do I need to have some sort of connection to the new hard drive?Is there any way to copy it without having to buy some kind of peripheral?I also have an external hard drive.Would my best bet be just backing everything up and just set up the hard drive as new and just restoring everything??
I need the stock Mac HDD desktop icon. Its the icon at the top right of this screen shot. [URL] Could someone please post a link or the file for me png format. I need it b/c i have 2 of them on my desktop b/c i have windows 7 on my mac too. I am going to modify the icon to have a transparent windows logo on top of the drive for my windows HDD. I will post the final product for any of u running both os x and windows on ur mac.
my old stock HD capacity is so small. and i want to upgrade/swtich to new 3TB ATA hard drive? it's possible?no issue with intel mac pro 2008? stock HD located in BAY#1 can i upgrade with new high capacity one? how to upgrade? step by step? do i have to move all content frm stock HD to new HD? and how? do i have to upgrade install new HD with disc utility ? how to change?
I have an old white Macbook, the 512 Ram, 60 GB Hard drive model, 2.0 Ghz. I'm currently upgrading my Ram to 2 Gb, can anyone recommend a relatively inexpensive model replacement for the stock drive with good speed. I'm currently shopping on Newegg and I have no idea what I am looking for.
i installed 4gb (2x2)of ram in my alum macbook pro 2,4ghz 15" and in the 1 first time i didn't took off the battery but it went well and booted ok, after that i turned off the computer and the next time keeped making noises.
I have change my C: drive name (was in past "Untitled"... eww) and it shows up changed as this new volume name on both my Mac and Windows sides. I also changed my Mac side harddrive name and it shows up changed on my Mac and PC sides. So this is all good and correct.
But when I boot up holding option, and am able in choosing which volume to use (Mac side or Windows Partition) the Mac side choice will be named whatever I have named the main drive which is what I expect. But the Windows Partition will just be named "Windows". It will not be named what my C: drive is named (which is what shows up on my Mac side desktop and what I want it to show up as).
This probably all sounds silly and of trivial but it would mean much to me if any one knew a way in changing so that when I choose which drive to use "Windows" will show up as C: "Drivename" would be much appreciated. If this could be a complicating issue I will let you know that the harddrive name for my Windows side contains a ' if that would cause a problem (but my Mac side name does too so it doesn't make much sense to me).
I am looking for a used Mac for my folks, and someone has posted an imac that they have converted to a PC, having change the master boot record. They say I have to take it to the apple store to get it changed back, but couldn't I just start it up in target disk mode, and reformat the internal drive use carbon copy cloner or something like that?
So I have Windows 7 installed with bootcamp, and of course OS X. But, when I turn on my computer, if I do not hold down the option key, my MBP automatically loads Windows. Is there a way to change it so that it will automatically load Mac OS X if I do not hold the option key?
I've been hearing good things about the Spinpoint Drives and the 750GB ones are coming down in price.Here is my current setup1 - 500MB Drive - Leopard2 - 320MB Drive - Vista 643 - 500MB Drive - FAT32 (Shared, Irrelevant)I plan on replacing drives 1 and 2 with 750GB Spinpoint drives.My question is, can I boot off of the Leopard dvd and put in Drive 1 and NewDrive1 and just clone it, and do the same for Drive2 and NewDrive2 and clone it? And then go into Leopard and resize the HFS partition, and go into Vista and resize the NTFS partition?
ok, i installed 4gb (2x2)of ram in my alum macbook pro 2,4ghz 15" and in the 1 first time i didn't took off the battery but it went well and booted ok, after that i turned off the computer and the next time keeped making noises.
i tried put the old ram and it's everything ok, i tried both ram slots and memoryes and the 1rs booted ok alone but the second didn't, what is happening, it's the second ram damaged or have you another explanation?
I have my laptop which is Powerbook G5 version 10.3.9 Panther. For the last two months the PB didn't boot up and it was beeping three times and white lid blinking.After going through internet i notice the problem was RAM and i need to change it. I bought another RAM 1GB (the old one was 512MB) and inserted it in the lower RAM slot.
Thank GOD the mac boot up properly and everything was fine. I charged it to full capacity and shut it down.The next day i started my mac as usual but surprisingly it beeps three times and it didn't boot up again.I open the RAM cover tried to remove it and replaces it again but it didn't work out and i am totally devastated and i don't know what to do any more.The brand name of the RAM i used is TRANSCEND.
If I have iTunes on an SSD drive (the boot drive in my Mac Mini), can it read the music library on a second rotational hard drive? I'd like not to have the large music library on a 120GB SSD drive.
This is bad and old, and full of lessons about backing up. Anyway, internal boot drive crashed a week ago, and internal optical drive is busted. New external LaCie dvd burner works fine, but all attempts to start up from Tiger, Leopard and Diskwarrior installation disks just end up back in OS10.3 on my external LaCie FW drive. I've tried many things: unplugged everything; switched external LaCie to USB (wouldn't boot), unplugged power from internal optical drive so Mac wouldn't look there first (somebody suggested that). Attempts to start up installers from mounted DVDs result in installer screen with restart button, which, when clicked on, results in... you guessed it... boot back to dreaded 10.3 system. Night owls and westcoasters, I am up for hours yet, pulling hair.
Last week I finally upgraded from 10.6 to 10.7, but now my Mac Pro (2008) won't boot properly. It'll start to boot with the gray screen and the Apple logo, but then the entire screen goes gray and it just locks up there. However, if I reboot and hold down the Option key to bring up the list of bootable drives that works fine. I've checked my Startup Drive settings and the proper drive is selected. why it won't boot on it's own anymore? Holding down the Option key is getting old.
I decided that I couldn't wait for Gainestown and ordered a 2.8x8 MP today. I'm going to get another 8GB of RAM (I assume 10GB in matched pairs will still perform at full speed). My real dilemma is a Boot/Storage solution-I'm moving from a Dual 867 G4, so all my current drives, both internal and external are IDE, which basically means I'm starting over as far as internal drives goes. The G4 power supply gave out so I'm getting this external enclosure to put my old drives into for file recovery. As far as new drives go, I can't figure out what to do. I'll spare you my million iterations of drive configs I've sketched over the past two days.
I run SSD/HDD, my HDD in the optibay is broken, I stuck it in a external and it makes finder freeze, it got bumped around too much so I want to put a new one back in the 'correct place' for a spinner, and stick the SSD in the optibay.(I figure the extra 2% of shock protection offered by the orange rubber circle things is worth the trouble of moving everything).
I am also going to buy a WD 3 platter 1TB laptop drive, and I read that they fit fine in the regular spot in MBP's (I'm going to open and measure in a min.)Anyways, there's no BIOS, only EFI, so how to I pick what drive to boot from? with 10.6 is it as simple as holding option down on boot, and picking my 'OSX' HDD, and then it will auto boot from that until I specify otherwise? (I ask because before 10.6 people on here were always talking about how to switch boot drives.)
I am a recent user of Mac and wondering about something. If I wanted to change the directory I am looking at in Command prompt in MSwindows I use a command, like unix/linux cd .. if I want to change the drive I want to explore in MS windows I use c: or d: or which ever drive I want to explore and then begin the exploration by using a dir or ls in the unix and cd to the folder.. how the l would I change drive from my primary to my seconary using the terminal window.. with a Mac? OS 10.4?
I have trided to upgrade the hard drive on my G4 15" powerbook. The ribon conector from the drive to the board has come free from the board and I don't know how to refasten it.
So I have this really weird issue that isn't a real problem as much as a nuisance, but it is quite irksome. In the the sidebar of the Finder window, the icons for my hard drive (along with the windows partition) will change randomly and without my involvement. Sometimes they show up as the windows entourage logo, sometimes this other weird icon I can't recognize. Has anyone seen this before / know why this is happening?
