I just installed OS X 10.4 and when I do the software update option, the 10.4.11 update downloads, but at the end it says that it could work because something about it could be tampered with? The 10.4 install disc is legit (black disc with silver x)
Why won't it let me update to 10.4.11? Also, my itunes won't work, it says it needs 10.4.9 or higher to work. It work with 10.3.9 which is older.
Quicklook has stopped workingon my MacBook Pro OS 10.6.8. Pressing the space bar on a file yields nothing. Is there a way to update or reset it so it starts working again?
Info:
MacBook Pro (17-inch Mid 2009), Mac OS X (10.6.8)
I bought an install disk for Leopard 10.5.1, installed it on a clean drive, and had it copy apps, files, Users, and settings from a 10.4.? volume. It went mostly ok, though it installed older versions of Safari and iTunes. I downloaded updated versions from [URL]
But when I fire off the Software Update option, it never finds any updates, even though Leopard is up to 10.5.5. It tells me it has nothing new at this time. What can I do?
I just updated Safari to 3.2.1 and it has gone crazy. It only loads a little of the page and then stops. What is wrong?
View 3 Replies View RelatedMy iSight on my MBP used to work fine on all apps as well as video chat sites, but it recently started working only occasionally on Omegle/Chatroulette. On my end, I could see myself, but others said they couldn't see me, and their cams were just black boxes like they weren't loading. It was the same way on both Firefox and Safari, so it couldn't be a browser issue. I thought it may have been an issue that came with the newest OS X update (the one with the Mac app store from just the other day), so I reinstalled OS X from the disk that came in the box. Now chat sites don't even recognize it and I get the "webcam required" message as though I don't even have one. But, Skype and iChat can use it just fine. I even reset the SMC by holding down left shift, control, option, and power with the computer off, but nothing changed. I am running the latest Flash (ver. 10.1.102.64) according to [URL].
View 1 Replies View RelatedI do the Sp1 update and the april 14th update 12.1.7 I think it is, it stops running. It keeps asking to update then close cuz it says nothing to update and then there is nothing so I do it again same thing. Just doesn't open. And I googled and I know a lot of people have had this problem. I also deleted the 2 files that most ppl said should work but when I put in my serial key after I deleted it the "continue" button doesn't take it to next page. It keeps getting clicked but it doesn't respond.
View 14 Replies View RelatedSo I noticed they're is an update for java today and want the update. It ask me for my password and I type it in and it says invalid. User name is there already when it prompts me. I restarted my mini to see if the keyboard might have been acting weird, but still not working.
View 6 Replies View RelatedInstalled the 2.8 firmware update on my late '08 macbook pro and after restarting it, it would just beep 3 times and not start up. I pulled my 8 gig kingston ram out, repositioned back and still the same issue. Slapping in the original 4 gigs of apple ram, it will start up and work fine though. Is there a fix to get the 8 gigs working again on the machine?
Info:
MacBook Pro, Mac OS X (10.6.8)
I just did the firmware update from my late 2011 Macbook Pro 13" (running 10.7.3) which all seemed to go fine, except I can't connect to my wifi any more. There is another 13" macbook pro, a 13" macbook air and 2 android phones which can all still access the wifi. I keep getting a message that my password is invalid (I know it's not). Everything I have tried has been done with the power supply connected.I have:
-rebooted the wifi router
-rebooted the mac
-shut down, waited for 5 minutes and rebooted
-repaired permissions
-deleted the keychain and tried to make a newconnection
-tried reinstalling the EFI firmware update from a .dmg (it won't let me)
Info:
MacBook Pro, Mac OS X (10.7.3)
When I try to use software update on my mackbook, I get this message; 'Software Update can’t connect to the update server. Make sure you’re connected to the Internet, and then try again.'Â
I have checked my Internet is connected. It is OK, just to be sure I tried a wireless connection, also OK, Internet connection is working fine. I have had this problem for three days, I have manage to download via this web site but not from Software update, is it still in use? could that be my problem. MacBook, Mac OS X (10.7.3)
updated a server from 10.6.8 to 10.7.3 Lion server. Most of the data is working on the new server. iCal is working as expected, but the wiki didn't work. Reimported the data with wikiadmin migrate -r Backup/ Collaboration -g wiki or wikiadmin migrate -r Backup/ Collaboration.On the server page I see the imported wikis, but some of the site get back an error: Routing Error No route matches "/wiki/4c548/site.html"Also none od the attachments are working The link is showing up as: url.....When hovering the file it show's the right filename...How can i clear the SQL database just for that wiki an reimport the data?
View 4 Replies View RelatedHaving mail issues after the 10.9.4 update this week? Neither my iCloud or Cox email account is able to send or receive email after this update. The small exclamation mark appears to the right of each account, both for incoming and sent email...as well as the Junk email. The error says something about not being able to connect to Port 993.Â
I tried disabling SSL in both accounts (which automatically changes Mail to a different port) but saw no change. I know email works on both of these accounts as I'm able to access them on my iDevices, so it has to be something specific to my iMac.Â
I have an old version of Aperture (3.1.2) that no longer works on my mac following my update to OSX (10.9.4). I would like to update my Aperture version so that its compatible with OSX but am unable to do so. All the aperture downloads tell me I have to update through the App Store but the App Store does not recognize that I have a valid, if outdated, version of Aperture on my computer and wants me to buy the software again. Is there a way to update Aperture (for free) and keep my library of photos?
Info:
MacBook Pro, OS X Mavericks (10.9.4)
My macbook pro's (late 2008) keyboard and trackpad stopped working about a month ago. I've been trying to get it working again, but to no avail. It initially stopped working when I updated my software. It got stuck on the startup screen after restarting from the install, so I had to hard shut down and restart. When I turned it back on my keyboard and trackpad didn't work.
I restarted again and it worked. Since then it's been going in and out and now it's finally stopped working all together. Since I'm pretty sure it's a software issue I wanted to reformat my computer. Problem is that I can't hold down the option key to boot it from my install disk! And I had to type all this from my usb mouse, and type each key on the keyboard viewer.
First the specifics: I have a MacPro, Version 10.6.2 for OSX. I did the latest update that showed for Safari. It went to reboot and just sat there and hung. I waited for 10 minutes, then manually restarted the Mac. It came up, but then when I went to open Mail, I got an error that it couldn't open. I then clicked on ok, and tried to open another app, and it wouldn't open. I tried with several apps with the same result. I downloaded the MacOSXUpdCombo10.6.2.dmg and ran it with no problems, and the Apps will still not open?
View 3 Replies View RelatedI updated to 10.6.4 the other day on my mbp 17" 2.93 mid 2009 model the other day. Since, my computer has developed two problems. first and most annoying, the keyboard doesn't work properly anymore. Shift keys don't work, then they do work. One side doesn't then the other side does. option and command do the same thing. Is this a documented problem? I searched and saw it was prior to 10.6.4, but I never had any problems until this update. Also, when I shut my computer, instead of going to sleep now. It goes crazy, fans jack up to full speed and it gets super hot. Doesn't sleep at all. Funny enough before the update, when i closed the lid the computer would go to sleep and wouldn't wake up.
View 1 Replies View RelatedThe EFI update that came out today for the 2011 macs is not working on my Mac12,2 27" 2011 iMac. It says "The software is not supported on your system". Am I wrong in assuming this is for my iMac? [URL].
Info:
iMac, Mac OS X (10.7.3)
this is macbook pro 10.7.3 ... after update 10.7.3 System Preferences is not working... it always Quit unexpectedly ... working only System Preferences version7.0 ... otherwise i have installed version 11.0 ...
Info:
MacBook Pro, Mac OS X (10.7.3)
I am unable to printer from [URL] since upgrating my Mac OS to 10.7.3Â
Info:
MacBook Pro, Mac OS X (10.7.3)
Right after OSX update on May 15, 2012, the pairing of my wireless trackpad to the desktop is no longer working. First the bluetooth found my trackpad. After clicking "continue", the box showed: "No trackpad found The pariing attempt was unsuccessful, click "continue" to try again. I've been trying for several times. Still not working!
Info:
Mac Pro
I did the software update.After that my 1 and only USB port is not working anymore.Totaly dead. Cant do any hardware test, since they ask to use a dvd. Well no USB so no Disk Drive So no hardware test.
Also the online test is not working.Need to download a file. which is failing to.Â
Dont know what to do.Â
Info:
MacBook Air, Mac OS X (10.7.4)
My sound does not seem to be working following the latest update to Mavericks (10.9.4). I am running a 2012 Retina Macbook Pro. Sound does not work with speakers, headphones or built-in sounds. Its not on mute, I have checked the Audio Midi setup and Sound settings and everything is as they were prior to the update, so the sound should still be working.Â
I have tried resetting the SMC and PRAM, no luck yet. Also tried re-installing the update but did not work.Â
I have a 13" MacBook Pro that was purchased in January 2014. Recently I installed the recommended updates for OS Mavericks on my computer. I rebooted the computer as recommended and when I went to login lo and behold my keyboard will not function. None of the keys will work so I couldn't even put in my login password to even see what the problem was. Naturally I went to all the apple forums I could, to find a solution and none of them seem to work. I reset the PRAM and SMC and still cannot get the keyboard to function. While under disk utility the keyboard functions just fine. But It will not function in a regular setting.
Info:
MacBook Pro, Mac OS X (10.7.4), keyboard issues
My iMovie hasn't been working and it wont let me get the new ox update. What do I do or how do I stop iMovie from running?
Info:
MacBook Pro with Retina display
I just got my macbook about 2 days ago I turned it off once and updated the software on it and when I turned it back on the trackpad stopped working. The pointer works when I use a USB mouse.
View 2 Replies View RelatedAs the title says, after I updated to 10.6.2, two-finger swipes suddenly stopped working on my Magic Mouse! It was working perfectly fine before.
View 4 Replies View RelatedI have a Intel Macintosh 2.33 Intel Core 2 Duo
It is running System 10.4.1
I own Adobe Creative Suite 2cs premium with Acrobat professional 8
Adobe updater automatically updated Acrobat and since that happened, my InDesign and Illustrator is not working. When I launch Illustrator it just hangs, and when Iaunch InDesign it asks me to "Personalize my copy" but will not allow me to put my serial number in.
I found cpsid_53468 on the adobe website and downloaded a disk image, followed the directions and installed it in my root library folder, as they described. I have tried this many times, and my software is still not working.
I called the support line, and they tell me that this is not supported anymore.
If this is the case, why is Adobe automatically updating Acrobat 8?
I called them and they told me they are not supporting CS2 any longer.
So I am stuck with this mess.
Sound is working fine on my MBA - but when i plug anything into the headphone jack i hear a millisecond of sound then nothing, as soon as i take it out again, it is still playing fine through built in speakers. I think it started happening after i downloaded and installed the latest update but i'm not 100% sure. Tested headphones, stereo etc. and nothing, working. (stereo & headphones work fine through iphone etc. so it's not the cable or the jack) It also does seem like it takes longer for the MBA to recognise something is plugged in? could be a software bug on the new update?
Info:
MacBook Air, Mac OS X (10.7)
My specs are as follows:Â Mac OS X 10.7.313" MacBook Air (2nd Gen)Graphics Card: Nvidia GeForce 320M 256MBFlash version: 11.1.102Â
A few months ago I noticed that Flash would not load videos on some websites (youtube works fine, but others sometimes show just a circle spinning). Normally I'd simply go to Firefox from Safari if I really wanted to watch a video. I did realize that the file that tends to not load usually encounters an error with the xml file. It usually says it could not find the host server by that name, but this happens accross multiple websites.Â
Now even Firefox has stopped working. I've tried unisntalling and re-installing flash, including older versions to no avail. I also attempted to clear the cache, delete flash folders in the library folder, etc. None of this has worked.The only other solution I've yet to try is that with the Lion update, you have to update your graphics card driver. I went to the nvidia website however, and for my graphics card they do not have a driver out yet.Â
Info:
MacBook Air (13-inch Late 2010), Mac OS X (10.7.3)
I could not use the type tool to create 'live' text on a layer. With the type tool selected I get the following error message when clicking to begin typing: "Could not complete your request because of a programme error." I quit Photoshop then attempted to launch the application by opening the file. The application opened but the file wouldn't, giving the same error message. I quite Photoshop again and relaunched the application from the Dock. The applicatiuion opens fine but displays the same error message (before I have attempted to open a file). With a file open I checked the type palette, where the dafault typeface is shown as Myriad Pro, but the default settings are: Type size: 1ptLinefeed (leading): 1ptKerning: 1Tracking 1Type height: 0% [code] Some odd settings there. The type tool bar (at the top of my display) has blank fields. Typing desired values into any of these fields doesn’t resolver the issue.I have tried restarting, creating a new file but to no avail.
Info:
MacBook Pro, Mac OS X (10.7.2)
