My iMovie hasn't been working and it wont let me get the new ox update. What do I do or how do I stop iMovie from running?
Info:
MacBook Pro with Retina display
So I've got a USB device OWC Voyage Q which is a drive dock that's currently plugged into USB When I switch it on I get 10/25/09 11:25:37 MkernelUSBF:130.545AppleUSBEHCI[0x81b9800]::Found a transaction which hasn't moved in 5 seconds on bus 0x26, timing out! (Addr: 0, EP: 0) all the time on the console
View 1 Replies View RelatedI can't update new versions of iMovie & iPhoto because it needs Mac OS X version 10.7.4. I have got 10.6.8.
View 2 Replies View RelatedOn my Macbook pro, it starts up, "optimizes movies" and then 5 seconds later crashes. It has never done this before which is why it must have something to do with the recent update (installed in the last week)
Info:
MacBookPro 15in, Mac OS X (10.5.7)
I recently updated OSX on my MacBook Pro and now iMovie '09 does't give an option to record video from the internal camera.
Info:
MacBook Pro, OS X Mavericks (10.9.4), iMovie '09
I can't update imovie '11 because i have to update to 10.7? How do i do that?, I cant update imovie '11 because i have to update to 10.7?
View 3 Replies View RelatedMy backup external hard drive hasn't work since I installed Snow Leopard. Bad:(Â I am still learning about my MAC and would just like to re-format the hard dive and set everything up again. I want to upgrade to Lion but can't untill I backup what I.
Info:
iMac, Mac OS X (10.6.8)
I'm trying to purchase The Walking Dead, Season 2, which is currently available as a Season Pass (despite the season being complete, now). I downloaded season 1, no problem, but when I try to download season 2, itunes just gets stuck on 'Purchasing', with the grey striped in motion in the info section at the top of the window.
I clicked the "Buy Season Pass" button, was prompted to enter my password and the info section changed to "Purchasing". The "Downloads" option on the left never appears. It's been three hours. I could've get dvds faster than this (provided that season 2 was available on dvd yet it's not, but it might be by the time itunes finally decides to download it!).
I'm running OS 10.6.8, iTunes 10.6.1.
Info:
Mac OS X (10.6.8)
I can't update iMovie, just to clear the red spot on the menu bar since I don't use it, update says I need to purchase but I have iMovie 9.0.4 and update is 9.0.6, do I need to purchase?
Info:
iMac, Mac OS X (10.6.8)
When I clicked the 'update' button, the Mac App Store said: "We could not complete your purchase. The product distribution file could not be verified. It may be damaged or was not signed."
Info:
iPhoto '11, Mac OS X (10.7.4)
all i have a question how to remove update iMovie i deleted imovie.
Update is showing how to remove this?
Quicklook has stopped workingon my MacBook Pro OS 10.6.8. Pressing the space bar on a file yields nothing. Is there a way to update or reset it so it starts working again?
Info:
MacBook Pro (17-inch Mid 2009), Mac OS X (10.6.8)
i keep getting download avialible can't get it from app stroe since it came installed on computer macbook. I down load it form the program but it won't install?
View 1 Replies View RelatedI want to update my apps like "iPhote and iMovie and Garage Band." but is says You have updates available for other accounts. To update this application, sign in to the account you used to purchase it. When I bought my computer it had this and even if i try to buy this apps it say i already is installed. I just got my mac back from the apple store and it is still not fixed and now i have this problem.
Info:
MacBook Air
Software update fails on all applications individually and the same updates downloaded from theApple website won't mount.Â
Info:
Mac OS X (10.7.4)
I have some files from a CVS disposable camcorder that are Divx encoded. I got them to play on my Mac with the Divx codec and/or Perian, but I can't import them into iMovie.
Will QuickTime Pro solve this problem by allowing me to convert to a format iMovie likes?
Is there a freeware solution involving less than two steps?
I have the version of iMovie that comes with OSX Maverick(10.0.3) and I've created the movie I want and everything, but when I go to hit share it won't even let me click on it. I've tried going to support but all it tells me to do to export is to click share and obviously that's not working.
Info:
MacBook Air
My iSight on my MBP used to work fine on all apps as well as video chat sites, but it recently started working only occasionally on Omegle/Chatroulette. On my end, I could see myself, but others said they couldn't see me, and their cams were just black boxes like they weren't loading. It was the same way on both Firefox and Safari, so it couldn't be a browser issue. I thought it may have been an issue that came with the newest OS X update (the one with the Mac app store from just the other day), so I reinstalled OS X from the disk that came in the box. Now chat sites don't even recognize it and I get the "webcam required" message as though I don't even have one. But, Skype and iChat can use it just fine. I even reset the SMC by holding down left shift, control, option, and power with the computer off, but nothing changed. I am running the latest Flash (ver. 10.1.102.64) according to [URL].
View 1 Replies View RelatedInstalled the 2.8 firmware update on my late '08 macbook pro and after restarting it, it would just beep 3 times and not start up. I pulled my 8 gig kingston ram out, repositioned back and still the same issue. Slapping in the original 4 gigs of apple ram, it will start up and work fine though. Is there a fix to get the 8 gigs working again on the machine?
Info:
MacBook Pro, Mac OS X (10.6.8)
I just did the firmware update from my late 2011 Macbook Pro 13" (running 10.7.3) which all seemed to go fine, except I can't connect to my wifi any more. There is another 13" macbook pro, a 13" macbook air and 2 android phones which can all still access the wifi. I keep getting a message that my password is invalid (I know it's not). Everything I have tried has been done with the power supply connected.I have:
-rebooted the wifi router
-rebooted the mac
-shut down, waited for 5 minutes and rebooted
-repaired permissions
-deleted the keychain and tried to make a newconnection
-tried reinstalling the EFI firmware update from a .dmg (it won't let me)
Info:
MacBook Pro, Mac OS X (10.7.3)
I have been editing a movie for hours, now, and iMovie has decided to stop working. I am able to skim the raw video that is displayed on the bottom, but my edited video on top does nothing. I can't play it back in the preview window, either while skimming or selecting whole clips to play. It will not open in full screen, either. I have restarted my computer, and I have repaired disk permissions. This is a very important movie, and I do not want to start over. What steps can I take to fix this problem and, more importantly, make sure that it doesn't happen again?
View 2 Replies View RelatedI updated to 10.6.4 the other day on my mbp 17" 2.93 mid 2009 model the other day. Since, my computer has developed two problems. first and most annoying, the keyboard doesn't work properly anymore. Shift keys don't work, then they do work. One side doesn't then the other side does. option and command do the same thing. Is this a documented problem? I searched and saw it was prior to 10.6.4, but I never had any problems until this update. Also, when I shut my computer, instead of going to sleep now. It goes crazy, fans jack up to full speed and it gets super hot. Doesn't sleep at all. Funny enough before the update, when i closed the lid the computer would go to sleep and wouldn't wake up.
View 1 Replies View Relatedthis is macbook pro 10.7.3 ... after update 10.7.3 System Preferences is not working... it always Quit unexpectedly ... working only System Preferences version7.0 ... otherwise i have installed version 11.0 ...
Info:
MacBook Pro, Mac OS X (10.7.3)
I did the software update.After that my 1 and only USB port is not working anymore.Totaly dead. Cant do any hardware test, since they ask to use a dvd. Well no USB so no Disk Drive So no hardware test.
Also the online test is not working.Need to download a file. which is failing to.Â
Dont know what to do.Â
Info:
MacBook Air, Mac OS X (10.7.4)
My sound does not seem to be working following the latest update to Mavericks (10.9.4). I am running a 2012 Retina Macbook Pro. Sound does not work with speakers, headphones or built-in sounds. Its not on mute, I have checked the Audio Midi setup and Sound settings and everything is as they were prior to the update, so the sound should still be working.Â
I have tried resetting the SMC and PRAM, no luck yet. Also tried re-installing the update but did not work.Â
I have a 13" MacBook Pro that was purchased in January 2014. Recently I installed the recommended updates for OS Mavericks on my computer. I rebooted the computer as recommended and when I went to login lo and behold my keyboard will not function. None of the keys will work so I couldn't even put in my login password to even see what the problem was. Naturally I went to all the apple forums I could, to find a solution and none of them seem to work. I reset the PRAM and SMC and still cannot get the keyboard to function. While under disk utility the keyboard functions just fine. But It will not function in a regular setting.
Info:
MacBook Pro, Mac OS X (10.7.4), keyboard issues
I'm in SL using iMovie (not iMove HD). When I make a project I can't seem to save it. Apple S doesn't work and there is no save option under any menu in it. Also, if I quit without saving there is no save prompt...
View 9 Replies View RelatedI just got my macbook about 2 days ago I turned it off once and updated the software on it and when I turned it back on the trackpad stopped working. The pointer works when I use a USB mouse.
View 2 Replies View RelatedSound is working fine on my MBA - but when i plug anything into the headphone jack i hear a millisecond of sound then nothing, as soon as i take it out again, it is still playing fine through built in speakers. I think it started happening after i downloaded and installed the latest update but i'm not 100% sure. Tested headphones, stereo etc. and nothing, working. (stereo & headphones work fine through iphone etc. so it's not the cable or the jack) It also does seem like it takes longer for the MBA to recognise something is plugged in? could be a software bug on the new update?
Info:
MacBook Air, Mac OS X (10.7)
My specs are as follows:Â Mac OS X 10.7.313" MacBook Air (2nd Gen)Graphics Card: Nvidia GeForce 320M 256MBFlash version: 11.1.102Â
A few months ago I noticed that Flash would not load videos on some websites (youtube works fine, but others sometimes show just a circle spinning). Normally I'd simply go to Firefox from Safari if I really wanted to watch a video. I did realize that the file that tends to not load usually encounters an error with the xml file. It usually says it could not find the host server by that name, but this happens accross multiple websites.Â
Now even Firefox has stopped working. I've tried unisntalling and re-installing flash, including older versions to no avail. I also attempted to clear the cache, delete flash folders in the library folder, etc. None of this has worked.The only other solution I've yet to try is that with the Lion update, you have to update your graphics card driver. I went to the nvidia website however, and for my graphics card they do not have a driver out yet.Â
Info:
MacBook Air (13-inch Late 2010), Mac OS X (10.7.3)
