PowerPC :: Finding Expert Advice - How To Remove A HD From A PowerMac G4 Quicksilver
Jan 27, 2010
I am wondering how I go about removing my Hard Drive from my Power Mac G4 QUicksilver? I don't know the first thing about removal or location of the HD?
It is a 40GB Ultra ATA/66 (5400 rpm)
I would like to remove it and fit it with a Hard Drive case enclosure so I can use it as an extra external for backing up data.
I was told by Tiger Direct that this enclosure should work:
[URL]
I would ultimately be connecting to a macmini for backing up data periodically.
I have a new 27" iMac with the i5 processor, Snow Leopard, and 8GB of Ram. Using the secondary display trick, I was able to successfully install Windows 7 (64 bit) with Bootcamp and it is working great. But I also have Parallels Desktop 5 (latest version) and am having troubles with it running Windows 7 from my Bootcamp partition.
I was able to get the virtual machine installed and Windows 7 will boot. However, it takes a LONG time to start the virtual machine and hard drive access is VERY sluggish. To be clear, Parallels itself loads fast but once I start the Windows 7 virtual machine, it takes 5-10 minutes to loads. But even after it loads, any time I do something to access the HD, it is very slow. For example, if I try to play a game, it'll take a long time to load the game but once it gets loaded, it runs great. So I know it's not a memory, CPU, or GPU issue. I have 4 GB or Ram dedicated to the virtual machine.
Now I thought I read something about Parallels having trouble with Windows 7 when using the Bootcamp partition - something about a HFS reading problem from a Bootcamp driving or something?
My Mac is booting into the 32bit kernel of Snow Leopard and the Windows 7 installation is 64 bit? Would that be causing a problem?
I also have Macfuse and Paragon NTFS installed on the Mac. Would those be causing a problem?
Specifically, what do you think could be causing the very slow hard drive access in my virtual machine? I wasn't able to find a solution at the Parallels website.
I'm fairly new to Mac's and have had this 13" MBP since July of 2009. I've noticed that my laptop will display a black screen and will not respond until I hold the power button and then restart it. Last week I sent it to Apple repair which they had it for a week and could not duplicate the problem. So it was sent back to me un-repaired. I honestly feel as though there is something wrong because at first I thought it wasn't waking up from sleep mode. However since getting the laptop back on Friday I have be paying attention to what's going on.
Since I thought it was a sleep issue, I thought if I went into the System Preferences, Energy Saver and from there I changed both the Battery & Power Adapter settings to NEVER, to keep it from going into Sleep Mode. Well after a little while the laptop will go to the black screen like I've been experiencing but why is the screen going black if I don't have it set to ever going to sleep?
I am doing a project in which I'm circulating some sensitive material via PDF files. Ideally, I'd love it if the PDF file could expire so that the sensitive material wasn't hanging out on people's computers forever. (the material isn't life or death sensitive-- but it would be great if we could limit the time that it existed "out there")..
I looked into solutions that create PDF files that expire-- but the functionality is expensive ($3000) and requires users download an Acrobat plugin-- which is too cumbersome for the scientists that need to see these PDFs--- any sort of expiration/security/DRM we impose on the files needs to be 100% transparent.
Does anyone know of an inexpensive way to do this with PDF files? (I have a feeling it might not be possible)--or not easily possible for someone without programming expertise like me--- BUT-- on the other hand....
Can anyone suggest another way to distribute documents that would expire?-- someone suggested using Flash or web delivery of some sort? Anyone have ideas on that front? The situation is that we're creating documents that are 40 to 150 pages in length, and have bookmarks for sections in the document-- so if we went to a Flash or Web delivery type of method.. it would have to be quite simple to go from PDF to this format--- and the medium would have to be printable and viewable when not connected to the internet.
I still have my serious video ram problem set my other post. The apple store wanted $650 to replace my motherboard and the cheapest i found one online was $950, all for a machine that SL will not even support. I am limping along waiting for my i7 iMac to show (Whenever that is)
Here is my question. I am not sure if my data on tis machine is corrupted by my video ram problem so not sure I want to do the firewire transfer, that is if my machine will even last till my new one shows.
I have 2 back-ups a time machine and a super duper backup of 99% of my stuff. If I use my time machine back-up wont it wipe SL OS 10.6 off the new machine? When you do a TM back-up from disk utility from the OS10.5 leopard start-up disc, it says that it will completely wipe your HD clean.
BTW do any of you experts know if my video artifact problem is corrupting my files or just my video, while I am typing this everything looks good unless I look at my menu-bar or dock which is pretty distorted....
Why were some Powermac G4's names have Quicksilver in them? Is it a special line or what? Whats the diffrence between the G4 "Quicksilver" and the regular g4?
using a MBP in a target disk mode i got the G4 to build, but on its own, the folder with the question mark appears blinking I want to know how do i get on lookign for the right PCi IDe card? Would any do?Is the Fw400 Card a better option? I guess putting a system disk in an external through firewire isn't gonna do it? But getting a PCI firewire would? is it fasterAm not to sure what i want to do with the machine once i get it working. Maybe put it at my folks house, about time the got to learn the MAC OS x.
I bought a new charger for my powerbook g4 a few weeks ago but recently the tip of the charger has been getting very very hot when i take it out (burns my skin to touch)
I just had the main logic board replaced on my powerbook G4 by Apple and the fans always seem to come on now.
I need a new/best card for a G5 quad 2.5. I know it's old (4 years) but it's still used quite a bit - mainly for Photoshop work. The card needs to run 2 x 23" Cinema Displays. I'm not sure if it makes any difference but it has 16GB memory (twice as much as our new 2.93 Quad can take - there's something not quite right there...)
I found a G4 quicksilver I couldn't help but bid on(eBay). Its 50 bucks with shipping. But before i pay I want to know a couple questions and opinions.
Question: Will this computer be good for some light movie editing and watching home videos and youtube? Cause my g3 is too slow to play any videos. I just want to know to get some advise if this is a really good deal or i should just save up more money and buy a newer mac.
Here the specs and pics. Quote: Apple PowerMac G4 Model Number: M8493 733MHz 256MB of RAM 40GB Hard Drive CD-RW/DVD Combo
Id like to use a 9400 or maybe even a 9500 pci video card on my powermac g4 fw800. Right now its got an ati 9000 agp video card, but i already ordered a flashed 7800 for it.
I know a few of the newer macs use 9400 video cards, so is it possible to add a pci 9400 to my powermac for CUDA support.
I think I will get the base model (3GB) and add a 2x4GB Crucial kit.
My question is this - is there any hit for keeping 2 x 1GB and putting the 2x4GB in (10GB Total)?
My uses are VM (XP for Corel Draw only) and CS5 in the mac side. I also need to do a lot of handbrake to convert my divx encodes to a more mac friendly format.
I have been trying to determine which Backup program is best to use to backup my MacPro to my CalDigit external eSATA VR Mini RAID drives? I have heard lots of good stuff about SuperDuper, Chronosynch, Carbon Copy Cloner...
I have a single Quad core 2008 Mac Pro with 2GB RAM (2x1GB). I am hoping to get more RAM from Crucial. I don't use my Pro for hard core stuff, just Internet, COD4, SecondLife, movies, iPhoto, iTunes etc..
I need to decide whether to get 2x1GB or 2X2GB. The 2x2GB is better value for money but I heard that a 4 matching set ie. 4x1GB would optimize RAM speed. Is this true? Would 4x1GB be faster than 2x1GB + 2x2GB for the applications I use?
I've heard several people reference they have drastically improved their gaming performance by optimizing things in Windows 7. While I wait for mine to arrive I would love it if anyone can post their tips and advice on getting the most out of this mediocre GPU.
i need to reinstall Quicksilver into my MBP but the website is currently offering only the Beta to Quicksilver and the old version sub-page is out of order. Does anyone know where I might be able to obtain the last stable (non-beta) version of Quicksilver?
Here's the deal: I have the most recent 17" UMBP, purchased last August, 2009 and got the Snow Leopard Up To Date Disk, did an install on my stock Hard Drive and have been VERY happy with everything for the past few months.
But... All these threads championing the latest Intel SSD G2 have finally gotten to me and, I just purchased the 80GB model from Newegg. It should be here tomorrow.
Now, I ask that you confirm, a specific question about installation from my UTD disk and then advise.
note that I've searched a ton about this subject. It's been answered in so many conflicting ways, I'm running it by you guys once again.
So then, it seems that I can NOT install Snow Leopard from my UTD disk onto the new, fresh Intel SSD installed into my 17" UMBP. This is the case, yes?
A workaround, I figure, would be to install Leopard 10.5 onto the new SSD and then to a clean and erase and then instal of 10.6 on top. I assume the UTD will read 10.5 and let the upgrade proceed.
So, finally, a question: Should I be worried about installing a total of two OSs given that I (cheaply!) opted for the smaller 80GB SSD and that 10.6 doesn't support TRIM?
I want to make my PowerMac G4 (Quicksilver 867) wireless using a USB device so I can get the higher speeds. Can anyone recommend a specific card they know works with my Mac? If anyone is interested I did a search and couldn't find what I was looking for.
I have an M8439 800/1.5/160/DVDRW 10.3.7 / 9.1 classic. I want to run Digidesign Pro Tools v5.1, which requires OS9 and an IDE HD to record to. I have purchased a WD Caviar SE - EIDE HD Question: can I just run it inline with the operating (boot) HD off the ATA bus, or do I need to get an IDE PCI adapter card?
I purchased a used ATI X850 XT AGP 2-slot for PC, not the single slot found as OEM on PowerMac G5s. The goal is to flash it with the equivalent Mac bios so that I can use it in my Mac G4 867MHz Quicksilver (2001). By the way, I already know that I have to cover up pins 3 and 11 in order for an 8x AGP card to work in my Apple 4x AGP slot.
I just set out to initialize the drive of my old G4 800 DP, using the system disc. Everything began fine but when I returned the screen was black, and video wasn't being picked up. I decided to force reboot and start over, but now I cannot get my mac to boot at all. Black screen with no video. Cannot boot from firewire target drive. Machine won't recognize system disc. When I boot there is no chime. I hear the machine apparently working hard to read the system disc but nothing happens and it eventually ejects the disc. I've tried 3 different discs, so I know it's the machine not the disc. Pressing "option" at startup has no effect. I also know it's not my LCD, as it works fine with my other machine. Anyone have any idea about what's going on here and what I can do to regain access to my machine?
Just picked up a minty Power Mac G4 Quick Silver and two ADC Studio Displays. I'd like to hookup both displays, but I only see one ADC port. What's my lease expensive dual ADC display option for this machine?
I have a G4 800mhz quicksilver, with 2 hd's and a cd burner drive. I just got the machine and I like it a lot but it is so loud. I don't know why it is so loud but I was wondering what I could upgrade in the machine to make it not so loud.
I can't seem to find specific information that would tell me if a 1.25 GHz processor from a MDD G4 would swap into a G4 Quicksilver (733 MHz) I have sitting in a corner.
They are both single processor machines, but I question the compatibility. I don't have the MDD machine with the 1.25 GHZ processor yet, so I can't look at them both for comparison.
my G4 quicksilver has resently decided that it doesnt want to work. when i press the power button the light and fans come on but then cut out again after about a second. any ideas?
