PowerPC :: Installing SATA On G4 Quicksilver?
May 8, 2009Do i need a Raid card to install a SATA hd for this model (quicksilver). Or can i just get a converter cable (IDE ATA-to-SATA).
View 3 Replies
ADVERTISEMENT
PowerPC :: Installing Two SATA Drives In A Quicksilver 2002?
Jul 10, 2009I have two drives in my Quicksilver 2002 G4, one is a 250GB which can be fully used, the other an 80GB. Can U rid both of these drives and install two SATA 1.5TB drives? I do not want to use the PCI slots for a SCSI card and wire additional drives that way, because the transfer speed will be limited to 40mbps I believe. I have a Sonnet card a dual PPC 1,8Ghz card, a PCI USB 2.0 card and have other open PCI slots, but finally ran out of storage, and have a use for this machine to hold a LOT more. Other than the transfer speeds possible on SATA, are there any other differences between the original IDE (ATA) drives? Do they connect the same way?
View 9 Replies View RelatedPowerPC :: Using G4 Quicksilver With SATA RAID And 6800?
Aug 21, 2008My SATA RAID card is conflicting with my 6800 GT Graphics card in my 2002 Quicksilver.
View 7 Replies View RelatedPowerPC :: Installing SATA Hdd In Dual 867 MDD G4
Feb 5, 2010I'm trying to install this hard drive in my Powermac. Here's the drive I'm considering installing:
[URL]
Will it work with my "Ultra ATA" Interface or will I have to buy a SATA card?
Hardware :: Installing New Hdd For G4 Quicksilver 2002?
Sep 15, 2008on good brand name to install would be appreciated. My original is on the way out.
PowerPC :: Uses For G4 Quicksilver?
Dec 8, 2008Uses for G4 Quicksilver?
Just bought it yesterday, have Puma on it currently, gonna upgrade to tiger when i get the disc.
What could i use it for, Server? iTunes streaming?
PowerPC :: Using Mac Quicksilver And Wireless USB?
Aug 24, 2007I want to make my PowerMac G4 (Quicksilver 867) wireless using a USB device so I can get the higher speeds. Can anyone recommend a specific card they know works with my Mac? If anyone is interested I did a search and couldn't find what I was looking for.
View 1 Replies View RelatedPowerPC :: Using Quicksilver IDE PCI Card?
Aug 29, 2008I have an M8439 800/1.5/160/DVDRW 10.3.7 / 9.1 classic. I want to run Digidesign Pro Tools v5.1, which requires OS9 and an IDE HD to record to. I have purchased a WD Caviar SE - EIDE HD Question: can I just run it inline with the operating (boot) HD off the ATA bus, or do I need to get an IDE PCI adapter card?
View 2 Replies View RelatedPowerPC :: Can Use X850 XT In A G4 Quicksilver
Oct 19, 2008I purchased a used ATI X850 XT AGP 2-slot for PC, not the single slot found as OEM on PowerMac G5s. The goal is to flash it with the equivalent Mac bios so that I can use it in my Mac G4 867MHz Quicksilver (2001). By the way, I already know that I have to cover up pins 3 and 11 in order for an 8x AGP card to work in my Apple 4x AGP slot.
View 5 Replies View RelatedPowerPC :: G4 Quicksilver DP 800 Won't Boot
Dec 3, 2009I just set out to initialize the drive of my old G4 800 DP, using the system disc. Everything began fine but when I returned the screen was black, and video wasn't being picked up. I decided to force reboot and start over, but now I cannot get my mac to boot at all. Black screen with no video. Cannot boot from firewire target drive. Machine won't recognize system disc. When I boot there is no chime. I hear the machine apparently working hard to read the system disc but nothing happens and it eventually ejects the disc. I've tried 3 different discs, so I know it's the machine not the disc. Pressing "option" at startup has no effect. I also know it's not my LCD, as it works fine with my other machine. Anyone have any idea about what's going on here and what I can do to regain access to my machine?
View 4 Replies View RelatedMac Pro :: Installing Sata Controller?
May 28, 2009I have installed 2 extra hdd's in my 2008 mac pro using the 2 extra sata ports. I was wondering if it would be possible to install a sata controller in the mac pro to increase my sata ports so I can add 2 more sata drives instead of the remaining optical drive. And if I can where would it go.
View 6 Replies View RelatedPowerPC :: Mac G4 Quicksilver - Dual ADC Monitors?
Sep 10, 2010Just picked up a minty Power Mac G4 Quick Silver and two ADC Studio Displays. I'd like to hookup both displays, but I only see one ADC port. What's my lease expensive dual ADC display option for this machine?
View 5 Replies View RelatedPowerPC :: How To Make G4 Quicksilver Quieter?
Jan 28, 2007I have a G4 800mhz quicksilver, with 2 hd's and a cd burner drive. I just got the machine and I like it a lot but it is so loud. I don't know why it is so loud but I was wondering what I could upgrade in the machine to make it not so loud.
View 6 Replies View RelatedPowerPC :: 1.25 GHz Processor From A MDD G4 Would Swap Into A G4 Quicksilver?
Apr 20, 2007I can't seem to find specific information that would tell me if a 1.25 GHz processor from a MDD G4 would swap into a G4 Quicksilver (733 MHz) I have sitting in a corner.
They are both single processor machines, but I question the compatibility. I don't have the MDD machine with the 1.25 GHZ processor yet, so I can't look at them both for comparison.
PowerPC :: Why Were Some Powermac G4's Names Have Quicksilver?
Oct 9, 2007Why were some Powermac G4's names have Quicksilver in them? Is it a special line or what? Whats the diffrence between the G4 "Quicksilver" and the regular g4?
View 10 Replies View RelatedPowerPC :: G4 Quicksilver Startup Problems?
May 25, 2008my G4 quicksilver has resently decided that it doesnt want to work. when i press the power button the light and fans come on but then cut out again after about a second. any ideas?
View 4 Replies View RelatedPowerPC :: 3GB Of Ram In A G4 Quicksilver/work With Memory?
Aug 28, 2008I was hoping to install 3-1GB PC-133 168-Pin Non-ECC non-Reg SDRAM Memory in a Quicksilver G4. Would this memory work?
G4 Quicksilver 1.8 GHZ 2TB Sata Raid.
PowerPC :: Got A PowerMAc G4 Quicksilver For Free Bad Controllers ?
Dec 17, 2008using a MBP in a target disk mode i got the G4 to build, but on its own, the folder with the question mark appears blinking I want to know how do i get on lookign for the right PCi IDe card? Would any do?Is the Fw400 Card a better option? I guess putting a system disk in an external through firewire isn't gonna do it?
But getting a PCI firewire would? is it fasterAm not to sure what i want to do with the machine once i get it working. Maybe put it at my folks house, about time the got to learn the MAC OS x.
PowerPC :: Hard Drive Not Mounting In G4 Quicksilver?
May 14, 2009My hard drive from my G4 733mhz wont mount at all. The ? in a blue folder just appears. I have tried to start up from an external mountable drive and the ? again appears. When I disconnect the internal hard drive completely and boot from my external drive it boots up.
Prior to this problem I took the hard drive from my G4 733Mhz and put it in my G4 867Mhz computer to load a new disk image. I did this as I didn't have access to an external mountable drive then. After doing this the hard drive doesn't mount in either computer and when connected all other mountable drives wont mount. I have the internal drive set to master.
PowerPC :: Video Card Upgrade G4 733ghz Quicksilver?
May 12, 2007pls be patient with my English, i'll try to do my best.
Finally i decided last week to upgrade an old Powerpc G4 733 Quicksilver (model before 2002 vers.)
I changed combo with a good Pioneer dvr-112d.
Now i'm asking u an indication: find a video card better than nvidia mx 32 installed with two important targets
1) Should support wide screen 1680x1850
2) should support core image tech in order to work better with last Tiger.
reading around i'm sure fx5200 satisfy nr2 but doesn't support wide, ati like 9600 had big problems of compatibility with my G4 model.
Pls could u point me to the right way ?
wich is the best video card compatible with a 733 ghz quicksilver ?
About Hard disk, one more question , i have 128 gb limitation.
I'm not gonna change the controller, is there any chance to mount a 7200rpm 16mb 250gb for my system ?
PowerPC :: Quicksilver Power Supply On A Gigabit Motherboard?
Mar 7, 2008Recently I didn't do my research, and I purchased a Quicksilver power supply to put on a Gigabit machine. I noticed it had four extra pins which look like some of the ones they use to power processors in some PCs (tho I've come to find this is for the ADC port). I dug a little deeper (Googled "powermac_g4.pdf") and found out that some of the pins have differences between the Gigabit PS and the Quicksilver PS.
Has anyone else had an experience like this? Will the PS work without any wirecutting or do I need to get a new one?
PowerPC :: G4 Quicksilver Hard Drive Finally Crashed
Aug 30, 2008Just want to know the proper type to replace it with. Is there a size (gigabyte, not physical!) limit I need to be concerned with?
View 5 Replies View RelatedIMac :: Installing Ssd Into Mini - Same As Regular Sata Drive?
Aug 6, 2009is installing an ssd into a mini the same as a regular sata drive? i had some problems with a mini upgrade, wondering if i did something wrong during the hdd upgrade
View 2 Replies View RelatedPowerPC :: Finding Expert Advice - How To Remove A HD From A PowerMac G4 Quicksilver
Jan 27, 2010 I am wondering how I go about removing my Hard Drive from my Power Mac G4 QUicksilver? I don't know the first thing about removal or location of the HD?
It is a 40GB Ultra ATA/66 (5400 rpm)
I would like to remove it and fit it with a Hard Drive case enclosure so I can use it as an extra external for backing up data.
I was told by Tiger Direct that this enclosure should work:
[URL]
I would ultimately be connecting to a macmini for backing up data periodically.
Hardware :: Installing An OEM SATA Hard Drive Into An OWC Mercury Elite-AL Enclosure
Dec 30, 2008looking at installing an OEM SATA hard drive into an OWC Mercury Elite-AL enclosure. Do I need a ribbon cable and screws? If so, could anyone recommend a brand of cable and tell me what size screws I would most likely need?
View 1 Replies View RelatedMacBook Pro :: Difference Between SATA, SATA II And SATA III?
May 11, 2012I have a 13" MacBook Pro 2011, 2.3gHz, 320GB. What connector does it have? And would SATA still work with my laptop? One more question, what are the exact dimensions of the hard disk drive bay in my laptop, the manual only says 2.5".
Info:
MacBook
Pro, Mac OS X (10.7.2)
PowerPC :: G4 MDD And SATA Drives
Nov 5, 2010My G4 MDD (1.25 CPU, 2G RAM, OSX 10.5.8) needs a new drive.
I'm told SATA drives are the thing to get.
I don't know what a SATA drive is, or whether it is compatible with my machine.
PowerPC :: G4 Sata HDD Install?
Feb 26, 2009I have a g4 quicksilver and I bought a 1TB sata hard drive to put in it. I also bought a pci card to connect the sata harddrive. I disconnected my other hard drive and put in the OS X disc to load the operating system, but when I get to the screen to choose which disc to install it on, my hard drive doesn't appear.
View 4 Replies View RelatedPowerPC :: SATA Controller For PowerMac G4
Nov 22, 2010I have a PowerMac G4 (MDD 2003, I believe) that I use as my home media server for my Apple TV. Currently I have a 14+14GB boot RAID and 75+75GB storage RAID, using old PATA drives, of course. This is working great and is pretty well performing so far, but I'm going to run out of space eventually since I'm a packrat. I'm thinking that this Christmas will be a good time to renovate this machine, so here's the question MacRumors: What's the best SATA controller for my machine? PS: It's a dual 1.25GHz PowerMac 3,6. In MacTracker, this matches 3 different machines. Is there a way to find out which one this truly is?
View 3 Replies View RelatedPowerPC :: Finding IDE To Sata Adapter In G4?
May 1, 2010What is the best way to go about this? I have seen some on Amazon that are dirt cheap but I don't know if they work. This is kinda off topic but will this work with a g4 AGP?
USB 2.0: [URL]
Gigabit Ethernet: [URL]
