I bought a new charger for my powerbook g4 a few weeks ago but recently the tip of the charger has been getting very very hot when i take it out (burns my skin to touch)
I just had the main logic board replaced on my powerbook G4 by Apple and the fans always seem to come on now.
I am running 10.5.5 Leopard with all updates etc
I am wondering how I go about removing my Hard Drive from my Power Mac G4 QUicksilver? I don't know the first thing about removal or location of the HD?
It is a 40GB Ultra ATA/66 (5400 rpm)
I would like to remove it and fit it with a Hard Drive case enclosure so I can use it as an extra external for backing up data.
I was told by Tiger Direct that this enclosure should work:
[URL]
I would ultimately be connecting to a macmini for backing up data periodically.
I have a new 27" iMac with the i5 processor, Snow Leopard, and 8GB of Ram. Using the secondary display trick, I was able to successfully install Windows 7 (64 bit) with Bootcamp and it is working great. But I also have Parallels Desktop 5 (latest version) and am having troubles with it running Windows 7 from my Bootcamp partition.
I was able to get the virtual machine installed and Windows 7 will boot. However, it takes a LONG time to start the virtual machine and hard drive access is VERY sluggish. To be clear, Parallels itself loads fast but once I start the Windows 7 virtual machine, it takes 5-10 minutes to loads. But even after it loads, any time I do something to access the HD, it is very slow. For example, if I try to play a game, it'll take a long time to load the game but once it gets loaded, it runs great. So I know it's not a memory, CPU, or GPU issue. I have 4 GB or Ram dedicated to the virtual machine.
Now I thought I read something about Parallels having trouble with Windows 7 when using the Bootcamp partition - something about a HFS reading problem from a Bootcamp driving or something?
My Mac is booting into the 32bit kernel of Snow Leopard and the Windows 7 installation is 64 bit? Would that be causing a problem?
I also have Macfuse and Paragon NTFS installed on the Mac. Would those be causing a problem?
Specifically, what do you think could be causing the very slow hard drive access in my virtual machine? I wasn't able to find a solution at the Parallels website.
I'm fairly new to Mac's and have had this 13" MBP since July of 2009. I've noticed that my laptop will display a black screen and will not respond until I hold the power button and then restart it. Last week I sent it to Apple repair which they had it for a week and could not duplicate the problem. So it was sent back to me un-repaired. I honestly feel as though there is something wrong because at first I thought it wasn't waking up from sleep mode. However since getting the laptop back on Friday I have be paying attention to what's going on.
Since I thought it was a sleep issue, I thought if I went into the System Preferences, Energy Saver and from there I changed both the Battery & Power Adapter settings to NEVER, to keep it from going into Sleep Mode. Well after a little while the laptop will go to the black screen like I've been experiencing but why is the screen going black if I don't have it set to ever going to sleep?
I am doing a project in which I'm circulating some sensitive material via PDF files. Ideally, I'd love it if the PDF file could expire so that the sensitive material wasn't hanging out on people's computers forever. (the material isn't life or death sensitive-- but it would be great if we could limit the time that it existed "out there")..
I looked into solutions that create PDF files that expire-- but the functionality is expensive ($3000) and requires users download an Acrobat plugin-- which is too cumbersome for the scientists that need to see these PDFs--- any sort of expiration/security/DRM we impose on the files needs to be 100% transparent.
Does anyone know of an inexpensive way to do this with PDF files? (I have a feeling it might not be possible)--or not easily possible for someone without programming expertise like me--- BUT-- on the other hand....
Can anyone suggest another way to distribute documents that would expire?-- someone suggested using Flash or web delivery of some sort? Anyone have ideas on that front? The situation is that we're creating documents that are 40 to 150 pages in length, and have bookmarks for sections in the document-- so if we went to a Flash or Web delivery type of method.. it would have to be quite simple to go from PDF to this format--- and the medium would have to be printable and viewable when not connected to the internet.
I still have my serious video ram problem set my other post. The apple store wanted $650 to replace my motherboard and the cheapest i found one online was $950, all for a machine that SL will not even support. I am limping along waiting for my i7 iMac to show (Whenever that is)
Here is my question. I am not sure if my data on tis machine is corrupted by my video ram problem so not sure I want to do the firewire transfer, that is if my machine will even last till my new one shows.
I have 2 back-ups a time machine and a super duper backup of 99% of my stuff. If I use my time machine back-up wont it wipe SL OS 10.6 off the new machine? When you do a TM back-up from disk utility from the OS10.5 leopard start-up disc, it says that it will completely wipe your HD clean.
BTW do any of you experts know if my video artifact problem is corrupting my files or just my video, while I am typing this everything looks good unless I look at my menu-bar or dock which is pretty distorted....
I've got MacBook Unibody 2GHz and if my charge ratio is 1 charge/1 day how long my battery will work - is it countable?
View 1 Replies View RelatedMy charger has died an uncomfortable death (burned itself due to a short in the cable). I'm looking at getting a replacement, and bought one on ebay which turned out not to be as described and didn't work properly, so it has been returned. I'm looking at this one, and the seller tells me it's a 65w charger, but there should be no problem with it, despite the PB being rated for a 45w charger. Anyway, the question is, will this charger work with my 12" PowerBook, or do I have to keep looking? I'm trying to conserve power now.
View 4 Replies View RelatedI just got a G4 powerbook - and need to get a car charger for it. Any suggestions of any that won't cost a fortune - and won't destroy the pb?
View 6 Replies View RelatedI found a charger that fits my ibook but its 20v 3.3A and 70 Watts. Do you think this would work? Thanks in advance for the answer
View 3 Replies View RelatedSo I've had the iBook for almost 3 years now and the charger seems to flick on and off. Sometimes I'll have to rotate the plug or twist the cord in a certain way in order to get the charge going.
Obviously, I'm past my free 1 year coverage by Apple so I was wondering if anyone would be able to tell me if this is an issue with the charger or the laptop.
The charger shows no wear and tear, the cord and all the pieces are still intact, nothing has fallen off or come apart.
Are there any tests I can run to see where the problem lies?
does anyone know where i can find a charger for an iBook G3??? This is kind of an emergency, my macally charger won't charge the ibook anymore and my imac is at the genius bar for the 4 days . I'm on my second Macally charger , so any brand besides macally would be fine.
View 2 Replies View RelatedI have an iBook G4 (mid 2005) and the charger has broken (third one!!).Apple don't have the replacement part.
View 7 Replies View RelatedThe charger for my ibook just decided to die, It has not worked like it should lately because it's beginning to break around the area where it connects to the mac.
Anyways.. when it died i noticed a tiny bit of smoke coming from either the charger or the ibook. Will things be ok again if i just buy a new charger or is the thing inside the computer fried?
I bought an iBook G3 (all white_ from someone and the charger if messed up and will not work. It will work once in a blue moon and turn orange for half an hour. As such, no iBook usage except for ten minutes X_X. I would really like to get a new charger so I can give to my mum. if those new things they sell in CompUSA for mac laptops will work?
View 1 Replies View Relatedi'm wondering if anyone has an extra ibook charger that i could purchase. i have the last g3 ibook series made (900 mhz). if anyone has an extra keyboard for that same model i would also be interested!
View 7 Replies View RelatedIs it possible to use a G4 PowerBook (3 years old) charger on a 7 year old G3 iBook? Or will the higher power PB charger blow the iBook up?
View 3 Replies View RelatedMy iBook charger broke, and I need a new one, but I am wee bitty confused.
Is it a 45W or a 65W I need?
It's a G3 iBook, 14", 900MHz
I bought a G4 14" iBook yesterday from Ebay but unfortunately the cable just after the charger plug is so baddly frayed that the light and power flickers on and off all the time. This makes it almost unusable. It is so close to the plug that it is not possible to repair the break.
I am wonder if anyone has a broken PSU(charger) that still has a good working plug that they would be willing to sell/donate to me.I would only require the plug and a few inches of the cable (so will be cheap to post). This way I can cut the plug of mine and join it with a working one. I am asking this as apposed to merely buying a new one as I am a student and already need to buy a new battery,ram upgrade and Airport Extreme card.
I have an snow iBook G3 that I use everyday as my machine for doing schoolwork etc., so it is a very critical machine. The battery doesn't hold a charge anymore, so I just plug it in. No big deal. However, just a few hours ago the iBook started to not recognize it was plugged in. The prong has always been bent a bit, I think, and it always worked (before MagSafe type). The charger is beat up at the cord going into the power brick from the wall outlet, but it has always worked too and it seems to be a problem with the prong going into the computer. I have to hold it a very certain way for it to even detect power. So, the machine has NO way to get any power. I was thinking about taking it in to the Apple store to see if they could still get me a non-magsafe charger, but what if its something different then the charger?
The specs are as follows:
12 inch iBook
PowerPC G3
500 mhz
128 gb RAM
I have a Vista laptop I can use until its fixed, but I'd rather not use Windows. No speical prgrams or anything, I just really like Mac OSX. I have files on the iBook, too.
I've still got my old PBG4 around after upgrading to my new MBP.
The wattage rating on my old adapter is actually higher than my new MBP, 65W for the old one vs. 60W on the new.
But the plug is different. Does anyone make an old-style PB round DC plug>magsafe adapter so that I can use the old charger with the new laptop?
Since these things are like $80 it'd be nice to just keep using the old one or at least have it as a spare. It's not that I really need one but if I could buy an adapter it would be convenient.
I have two ac charger cords for my PB - the one it came with and a backup. My battery is about three months old and seems to be very healthy. The problem is that the cord arbitrarily stops charging (thought it was the cord, used the backup - same thing happens). The light on the cord where it plugs in to the computer goes off and I must unplug it from the power source and replug for it to start charging again, which it always does. I thought it was the outlet on the surge protector, so I switched outlets. No improvement. I thought then that it might be the surge protector itself, so I plugged it directly into another outlet, to no avail.
View 4 Replies View RelatedMy Powerbook G4 only turns on if the battery charger is plugged in, and if I unplug it, the computer shuts off. On the menu bar, it says charging. I know the battery has to be full. This just started happening last night. Also, I just had the hard drive replaced and I've only had it back for a couple weeks.
View 10 Replies View RelatedMy iBook charger has stopped working, the iBook is well out of warranty by now, and i cant find any replacement chargers for it. Instead of just buying another one, will apple replace my current one? It was sparking on the cable that plugs into the computer and it looks like its been burnt, which is probobly why it doesn't work anymore, is this a defect with apples chargers and will they replace it even though my iBook is out of warranty?
View 11 Replies View RelatedI have an old G3 iBook 500 and it was fine last week but I didnt use it for a week (it has 10.2.8 and 9.2) but now I went to use it and the battery was on its last dot and it was sleeping. I tried to charge it and the light never came on the charger and its not charging. Now its dead cuz the battery went flat. its not the original charger its the newer square
View 7 Replies View Relateda while ago I found this post, where this guy describes how to recondition SSD using Disk Utility. Here are his described steps:
- used CarbonCopyCloner to clone my SSD to a nice 1TB drive on a Firewire 800 dock.
- booted from the external drive into my clone OS.
- opened Disk Utility and selected the SSD.
- ran the "erase" function on the SSD.
- ran the partition function - selecting 1 partition for the volume scheme.
- repeated the partition with 16 partitions
- reduced the drive back to one Mac OS Extended Journaled partition.
- erased free space on the drive (seems unnecessary in retrospect)
I have a 17" PB with a couple of growing issues. Right now I am unable to use it for one of several reasons. About a year ago I purchased a charger off of Ebay to replace the original one that started sparking. Shortly after I received the new charger I started having issues with the charger connecting. I would have to twist it and turn it to find the right spot. Now, it doesn't glow green or amber at all. That sweet spot is completely gone. Also, the battery is completely dead. It needs to be replaced. Not sure at this point if I'm sitting on a dead charger or if I need to replace the DC-In board. I have never had a major accident with the machine but I do recall snagging the chord once or twice. It is possible something was damaged inside when that happened. I've never had an issue like this so I'm not too sure about the symptoms. I'm thinking a new charger would be the cheapest and safest start. I don't feel very confident purchasing one from Ebay again.
View 4 Replies View RelatedIs there a way to prevent the PB from going to sleep after the wall charger is unplugged when using the clamshell mode? I'm going to use my PB as a carputer and want it to run for awhile after I turn off the car..I know the PB will go to sleep when it loses power in clamshell mode..
View 3 Replies View RelatedIs it better to keep the charger in after a completely charged or pull out the charger. Basically I'm wondering if the power is pulled from the UPS after the battery is completely charged or is it still constantly charging the battery.
View 3 Replies View RelatedThe Apple one looks tempting as it comes with 6 batteries and 29€ isn't too much, plus, as usual, it looks brilliant. I looked at some 3rd party chargers as well ranging from 20€ to 40€. None of them was stunning or special by any means. Cheaper ones usually came with two or four batteries and some came without batteries. I don't really need it for else than Magic Mouse, occasionally for something else too.
View 23 Replies View Related