PowerPC :: Uses For G4 Quicksilver?
Dec 8, 2008Uses for G4 Quicksilver?
Just bought it yesterday, have Puma on it currently, gonna upgrade to tiger when i get the disc.
What could i use it for, Server? iTunes streaming?
ADVERTISEMENT
PowerPC :: Using Mac Quicksilver And Wireless USB?
Aug 24, 2007I want to make my PowerMac G4 (Quicksilver 867) wireless using a USB device so I can get the higher speeds. Can anyone recommend a specific card they know works with my Mac? If anyone is interested I did a search and couldn't find what I was looking for.
View 1 Replies View RelatedPowerPC :: Using Quicksilver IDE PCI Card?
Aug 29, 2008I have an M8439 800/1.5/160/DVDRW 10.3.7 / 9.1 classic. I want to run Digidesign Pro Tools v5.1, which requires OS9 and an IDE HD to record to. I have purchased a WD Caviar SE - EIDE HD Question: can I just run it inline with the operating (boot) HD off the ATA bus, or do I need to get an IDE PCI adapter card?
View 2 Replies View RelatedPowerPC :: Can Use X850 XT In A G4 Quicksilver
Oct 19, 2008I purchased a used ATI X850 XT AGP 2-slot for PC, not the single slot found as OEM on PowerMac G5s. The goal is to flash it with the equivalent Mac bios so that I can use it in my Mac G4 867MHz Quicksilver (2001). By the way, I already know that I have to cover up pins 3 and 11 in order for an 8x AGP card to work in my Apple 4x AGP slot.
View 5 Replies View RelatedPowerPC :: G4 Quicksilver DP 800 Won't Boot
Dec 3, 2009I just set out to initialize the drive of my old G4 800 DP, using the system disc. Everything began fine but when I returned the screen was black, and video wasn't being picked up. I decided to force reboot and start over, but now I cannot get my mac to boot at all. Black screen with no video. Cannot boot from firewire target drive. Machine won't recognize system disc. When I boot there is no chime. I hear the machine apparently working hard to read the system disc but nothing happens and it eventually ejects the disc. I've tried 3 different discs, so I know it's the machine not the disc. Pressing "option" at startup has no effect. I also know it's not my LCD, as it works fine with my other machine. Anyone have any idea about what's going on here and what I can do to regain access to my machine?
View 4 Replies View RelatedPowerPC :: Mac G4 Quicksilver - Dual ADC Monitors?
Sep 10, 2010Just picked up a minty Power Mac G4 Quick Silver and two ADC Studio Displays. I'd like to hookup both displays, but I only see one ADC port. What's my lease expensive dual ADC display option for this machine?
View 5 Replies View RelatedPowerPC :: How To Make G4 Quicksilver Quieter?
Jan 28, 2007I have a G4 800mhz quicksilver, with 2 hd's and a cd burner drive. I just got the machine and I like it a lot but it is so loud. I don't know why it is so loud but I was wondering what I could upgrade in the machine to make it not so loud.
View 6 Replies View RelatedPowerPC :: 1.25 GHz Processor From A MDD G4 Would Swap Into A G4 Quicksilver?
Apr 20, 2007I can't seem to find specific information that would tell me if a 1.25 GHz processor from a MDD G4 would swap into a G4 Quicksilver (733 MHz) I have sitting in a corner.
They are both single processor machines, but I question the compatibility. I don't have the MDD machine with the 1.25 GHZ processor yet, so I can't look at them both for comparison.
PowerPC :: Why Were Some Powermac G4's Names Have Quicksilver?
Oct 9, 2007Why were some Powermac G4's names have Quicksilver in them? Is it a special line or what? Whats the diffrence between the G4 "Quicksilver" and the regular g4?
View 10 Replies View RelatedPowerPC :: G4 Quicksilver Startup Problems?
May 25, 2008my G4 quicksilver has resently decided that it doesnt want to work. when i press the power button the light and fans come on but then cut out again after about a second. any ideas?
View 4 Replies View RelatedPowerPC :: 3GB Of Ram In A G4 Quicksilver/work With Memory?
Aug 28, 2008I was hoping to install 3-1GB PC-133 168-Pin Non-ECC non-Reg SDRAM Memory in a Quicksilver G4. Would this memory work?
G4 Quicksilver 1.8 GHZ 2TB Sata Raid.
PowerPC :: Installing SATA On G4 Quicksilver?
May 8, 2009Do i need a Raid card to install a SATA hd for this model (quicksilver). Or can i just get a converter cable (IDE ATA-to-SATA).
View 3 Replies View RelatedPowerPC :: Using G4 Quicksilver With SATA RAID And 6800?
Aug 21, 2008My SATA RAID card is conflicting with my 6800 GT Graphics card in my 2002 Quicksilver.
View 7 Replies View RelatedPowerPC :: Got A PowerMAc G4 Quicksilver For Free Bad Controllers ?
Dec 17, 2008using a MBP in a target disk mode i got the G4 to build, but on its own, the folder with the question mark appears blinking I want to know how do i get on lookign for the right PCi IDe card? Would any do?Is the Fw400 Card a better option? I guess putting a system disk in an external through firewire isn't gonna do it?
But getting a PCI firewire would? is it fasterAm not to sure what i want to do with the machine once i get it working. Maybe put it at my folks house, about time the got to learn the MAC OS x.
PowerPC :: Hard Drive Not Mounting In G4 Quicksilver?
May 14, 2009My hard drive from my G4 733mhz wont mount at all. The ? in a blue folder just appears. I have tried to start up from an external mountable drive and the ? again appears. When I disconnect the internal hard drive completely and boot from my external drive it boots up.
Prior to this problem I took the hard drive from my G4 733Mhz and put it in my G4 867Mhz computer to load a new disk image. I did this as I didn't have access to an external mountable drive then. After doing this the hard drive doesn't mount in either computer and when connected all other mountable drives wont mount. I have the internal drive set to master.
PowerPC :: Video Card Upgrade G4 733ghz Quicksilver?
May 12, 2007pls be patient with my English, i'll try to do my best.
Finally i decided last week to upgrade an old Powerpc G4 733 Quicksilver (model before 2002 vers.)
I changed combo with a good Pioneer dvr-112d.
Now i'm asking u an indication: find a video card better than nvidia mx 32 installed with two important targets
1) Should support wide screen 1680x1850
2) should support core image tech in order to work better with last Tiger.
reading around i'm sure fx5200 satisfy nr2 but doesn't support wide, ati like 9600 had big problems of compatibility with my G4 model.
Pls could u point me to the right way ?
wich is the best video card compatible with a 733 ghz quicksilver ?
About Hard disk, one more question , i have 128 gb limitation.
I'm not gonna change the controller, is there any chance to mount a 7200rpm 16mb 250gb for my system ?
PowerPC :: Quicksilver Power Supply On A Gigabit Motherboard?
Mar 7, 2008Recently I didn't do my research, and I purchased a Quicksilver power supply to put on a Gigabit machine. I noticed it had four extra pins which look like some of the ones they use to power processors in some PCs (tho I've come to find this is for the ADC port). I dug a little deeper (Googled "powermac_g4.pdf") and found out that some of the pins have differences between the Gigabit PS and the Quicksilver PS.
Has anyone else had an experience like this? Will the PS work without any wirecutting or do I need to get a new one?
PowerPC :: G4 Quicksilver Hard Drive Finally Crashed
Aug 30, 2008Just want to know the proper type to replace it with. Is there a size (gigabyte, not physical!) limit I need to be concerned with?
View 5 Replies View RelatedPowerPC :: Installing Two SATA Drives In A Quicksilver 2002?
Jul 10, 2009I have two drives in my Quicksilver 2002 G4, one is a 250GB which can be fully used, the other an 80GB. Can U rid both of these drives and install two SATA 1.5TB drives? I do not want to use the PCI slots for a SCSI card and wire additional drives that way, because the transfer speed will be limited to 40mbps I believe. I have a Sonnet card a dual PPC 1,8Ghz card, a PCI USB 2.0 card and have other open PCI slots, but finally ran out of storage, and have a use for this machine to hold a LOT more. Other than the transfer speeds possible on SATA, are there any other differences between the original IDE (ATA) drives? Do they connect the same way?
View 9 Replies View RelatedPowerPC :: Finding Expert Advice - How To Remove A HD From A PowerMac G4 Quicksilver
Jan 27, 2010 I am wondering how I go about removing my Hard Drive from my Power Mac G4 QUicksilver? I don't know the first thing about removal or location of the HD?
It is a 40GB Ultra ATA/66 (5400 rpm)
I would like to remove it and fit it with a Hard Drive case enclosure so I can use it as an extra external for backing up data.
I was told by Tiger Direct that this enclosure should work:
[URL]
I would ultimately be connecting to a macmini for backing up data periodically.
PowerPC :: G4 Power Mac "Quicksilver" - Compatibility?
Apr 7, 2008I am buying a G4 Power Mac. I was wondering if anyone knows what the capabilities are of this computer. Can the RAM be upgraded to 2 or 4GB? Graphics card? As far as I know, Leopard can be installed so I am good with the OS. Oh, and a friend told me the Power Mac is like a Mac Pro but older. Is this true? Like can the Power Mac house multiple processors and hard drives?
View 14 Replies View RelatedOS X :: Looking For Something Special About Quicksilver
May 10, 2009I've read tutorials on it, Ive downloaded it, played with it, uninstalled it. I have to be missing something here. To me it looks just like a more complicated way to get to programs and things you want. What am I missing? What does it really do? I don't get why everyone is so in love with this program. Everything online I find about it gushes about how great it is but always ends up boiling down to "it helps you open applications faster".
View 5 Replies View RelatedOS X :: Quicksilver Might Be Dead In 10.6?
Aug 28, 2009I haven't confirmed this yet, but nothing is working with Quicksilver.
View 10 Replies View RelatedSoftware :: Downloading Quicksilver?
Sep 8, 2007I had to reinstall today (long story) and it seems like quicksilver's site is down. I'm not sure if I'll make it through the night without QS (semi-serious). Does anyone know what's going on? Or anywhere I can download the most up to date beta?
View 7 Replies View RelatedHardware :: Buttons On A G4 Quicksilver Functions?
Apr 14, 2009What do the two little buttons under the power button on the front of a G4 Quicksilver do? The one in the middle has a "play" icon on it although it is pointing in the wrong direction to be a play button. It points to the left. The other smaller one has the look of a reset button.
View 2 Replies View RelatedOS X :: Quicksilver - Tons Of Bugs And Keep Crashing
Nov 13, 2008Quicksilver is my most used app on my macbook pro. But I'm amazed its still in beta. Is it dead or something? There are tons of bugs and it keeps crashing
View 16 Replies View RelatedHardware :: Installing New Hdd For G4 Quicksilver 2002?
Sep 15, 2008on good brand name to install would be appreciated. My original is on the way out.
Software :: Apple PowerMac G4 - Quicksilver ?
Aug 1, 2008I found a G4 quicksilver I couldn't help but bid on(eBay). Its 50 bucks with shipping. But before i pay I want to know a couple questions and opinions.
Question: Will this computer be good for some light movie editing and watching home videos and youtube? Cause my g3 is too slow to play any videos. I just want to know to get some advise if this is a really good deal or i should just save up more money and buy a newer mac.
Here the specs and pics.
Quote:
Apple PowerMac G4
Model Number: M8493
733MHz
256MB of RAM
40GB Hard Drive
CD-RW/DVD Combo
Software :: OS X 10.4.1.1 Hangs During Startup (G4 867 Quicksilver)
Apr 26, 2010My old faithful G4 867 Quicksilver won't start up. The grey screen with the apple appears, then the progress bar over a blue background. The progress bar gets to full and the system hangs there. Here are the answers to the "Read This Before Posting" questions: What OS X system (version) are you running? 10.4.1.1
--Have you run permissions yet? Not sure exactly what that means, but attempted to repair them using Disk Utility and then DiskWarrior
--Have you used Disk Utility from the CD to Repair Disk? Yes
--What devices are connected to your machine? USB Keyboard, USB mouse connected through keyboard port, lcd monitor,
ethernet cable
More background on the situation:
I have zapped the PRAM.
It will not boot into safe mode..................
Software :: 1Password Integration With Quicksilver Options
Feb 28, 2008I use a program called 1Password (which is pretty much the freakin' coolest application out there, other than Quicksilver). Click here for more info about this app...For the longest time now, I have been dying to get the developers of 1Password to integrate their program with Quicksilver so that I could use QS to launch any of my saved 'web form' entries (which are basically 1Password database entires that store a URL, and your corresponding username/password for that for that URL - and when a web form is launched via the programs 'Go-and-fill' command, the application will open the specified website in your browser and will automatically log you in, without the need for any user intervention whatsoever).
View 1 Replies View Related
