I have a G4 800mhz quicksilver, with 2 hd's and a cd burner drive. I just got the machine and I like it a lot but it is so loud. I don't know why it is so loud but I was wondering what I could upgrade in the machine to make it not so loud.
View 6 Repliesso i want to type a part of file name in QS and let QS find the file ..
i know its poissible,but how to do it ??
Uses for G4 Quicksilver?
Just bought it yesterday, have Puma on it currently, gonna upgrade to tiger when i get the disc.
What could i use it for, Server? iTunes streaming?
I want to make my PowerMac G4 (Quicksilver 867) wireless using a USB device so I can get the higher speeds. Can anyone recommend a specific card they know works with my Mac? If anyone is interested I did a search and couldn't find what I was looking for.
View 1 Replies View RelatedI have an M8439 800/1.5/160/DVDRW 10.3.7 / 9.1 classic. I want to run Digidesign Pro Tools v5.1, which requires OS9 and an IDE HD to record to. I have purchased a WD Caviar SE - EIDE HD Question: can I just run it inline with the operating (boot) HD off the ATA bus, or do I need to get an IDE PCI adapter card?
View 2 Replies View RelatedI purchased a used ATI X850 XT AGP 2-slot for PC, not the single slot found as OEM on PowerMac G5s. The goal is to flash it with the equivalent Mac bios so that I can use it in my Mac G4 867MHz Quicksilver (2001). By the way, I already know that I have to cover up pins 3 and 11 in order for an 8x AGP card to work in my Apple 4x AGP slot.
View 5 Replies View RelatedI just set out to initialize the drive of my old G4 800 DP, using the system disc. Everything began fine but when I returned the screen was black, and video wasn't being picked up. I decided to force reboot and start over, but now I cannot get my mac to boot at all. Black screen with no video. Cannot boot from firewire target drive. Machine won't recognize system disc. When I boot there is no chime. I hear the machine apparently working hard to read the system disc but nothing happens and it eventually ejects the disc. I've tried 3 different discs, so I know it's the machine not the disc. Pressing "option" at startup has no effect. I also know it's not my LCD, as it works fine with my other machine. Anyone have any idea about what's going on here and what I can do to regain access to my machine?
View 4 Replies View RelatedJust picked up a minty Power Mac G4 Quick Silver and two ADC Studio Displays. I'd like to hookup both displays, but I only see one ADC port. What's my lease expensive dual ADC display option for this machine?
View 5 Replies View RelatedI can't seem to find specific information that would tell me if a 1.25 GHz processor from a MDD G4 would swap into a G4 Quicksilver (733 MHz) I have sitting in a corner.
They are both single processor machines, but I question the compatibility. I don't have the MDD machine with the 1.25 GHZ processor yet, so I can't look at them both for comparison.
Why were some Powermac G4's names have Quicksilver in them? Is it a special line or what? Whats the diffrence between the G4 "Quicksilver" and the regular g4?
View 10 Replies View Relatedmy G4 quicksilver has resently decided that it doesnt want to work. when i press the power button the light and fans come on but then cut out again after about a second. any ideas?
View 4 Replies View RelatedI was hoping to install 3-1GB PC-133 168-Pin Non-ECC non-Reg SDRAM Memory in a Quicksilver G4. Would this memory work?
G4 Quicksilver 1.8 GHZ 2TB Sata Raid.
Do i need a Raid card to install a SATA hd for this model (quicksilver). Or can i just get a converter cable (IDE ATA-to-SATA).
View 3 Replies View RelatedMy SATA RAID card is conflicting with my 6800 GT Graphics card in my 2002 Quicksilver.
View 7 Replies View Relatedusing a MBP in a target disk mode i got the G4 to build, but on its own, the folder with the question mark appears blinking I want to know how do i get on lookign for the right PCi IDe card? Would any do?Is the Fw400 Card a better option? I guess putting a system disk in an external through firewire isn't gonna do it?
But getting a PCI firewire would? is it fasterAm not to sure what i want to do with the machine once i get it working. Maybe put it at my folks house, about time the got to learn the MAC OS x.
My hard drive from my G4 733mhz wont mount at all. The ? in a blue folder just appears. I have tried to start up from an external mountable drive and the ? again appears. When I disconnect the internal hard drive completely and boot from my external drive it boots up.
Prior to this problem I took the hard drive from my G4 733Mhz and put it in my G4 867Mhz computer to load a new disk image. I did this as I didn't have access to an external mountable drive then. After doing this the hard drive doesn't mount in either computer and when connected all other mountable drives wont mount. I have the internal drive set to master.
pls be patient with my English, i'll try to do my best.
Finally i decided last week to upgrade an old Powerpc G4 733 Quicksilver (model before 2002 vers.)
I changed combo with a good Pioneer dvr-112d.
Now i'm asking u an indication: find a video card better than nvidia mx 32 installed with two important targets
1) Should support wide screen 1680x1850
2) should support core image tech in order to work better with last Tiger.
reading around i'm sure fx5200 satisfy nr2 but doesn't support wide, ati like 9600 had big problems of compatibility with my G4 model.
Pls could u point me to the right way ?
wich is the best video card compatible with a 733 ghz quicksilver ?
About Hard disk, one more question , i have 128 gb limitation.
I'm not gonna change the controller, is there any chance to mount a 7200rpm 16mb 250gb for my system ?
Recently I didn't do my research, and I purchased a Quicksilver power supply to put on a Gigabit machine. I noticed it had four extra pins which look like some of the ones they use to power processors in some PCs (tho I've come to find this is for the ADC port). I dug a little deeper (Googled "powermac_g4.pdf") and found out that some of the pins have differences between the Gigabit PS and the Quicksilver PS.
Has anyone else had an experience like this? Will the PS work without any wirecutting or do I need to get a new one?
Just want to know the proper type to replace it with. Is there a size (gigabyte, not physical!) limit I need to be concerned with?
View 5 Replies View RelatedI have two drives in my Quicksilver 2002 G4, one is a 250GB which can be fully used, the other an 80GB. Can U rid both of these drives and install two SATA 1.5TB drives? I do not want to use the PCI slots for a SCSI card and wire additional drives that way, because the transfer speed will be limited to 40mbps I believe. I have a Sonnet card a dual PPC 1,8Ghz card, a PCI USB 2.0 card and have other open PCI slots, but finally ran out of storage, and have a use for this machine to hold a LOT more. Other than the transfer speeds possible on SATA, are there any other differences between the original IDE (ATA) drives? Do they connect the same way?
View 9 Replies View Related I am wondering how I go about removing my Hard Drive from my Power Mac G4 QUicksilver? I don't know the first thing about removal or location of the HD?
It is a 40GB Ultra ATA/66 (5400 rpm)
I would like to remove it and fit it with a Hard Drive case enclosure so I can use it as an extra external for backing up data.
I was told by Tiger Direct that this enclosure should work:
[URL]
I would ultimately be connecting to a macmini for backing up data periodically.
Are Mac Pro's noticeably quieter than G5's?
View 2 Replies View RelatedI have a 1TB x 2 setup in a Guardian Maximus enclosure, which i like, but it is noisy. Per OWC support, the noise levels i have are pretty normal.
The noise is not server room noisy, I will admit that
However, this setup is connected to my Mac Mini, always on and serving up my iTunes content to 2 apple TVs. Previously, I had been using 500gb and 750gb external drives, no RAID. Both previous drives (Seagate free agents) ran perfectly quiet enough.
The big thing is, in my apartment the setup is on my TV center, and that is close to our bed. the Seagate drives were inaudible, the only thing noticed was the orange light if i didnt shut the light off in the config. But you couldn't hear the drive noise otherwise.Not so with the Maximus. Its a constant hum, and the wife has now commented about it. Which means i need to either
a-quiet the maximus
or
b-replace it with something quieter.
so I wanted to see if anyone had experience with the maximus, alongside something like the WD Mirrored options, the Lacie RAID1 options or anything else. $250 is about my budget for this.but now i am wondering if i shouldn't just get a 1tb solo drive, use that for the main iTunes drive and then fire up the RAID1 enclosure once a week and back up the media (my main reason for the RAID was getting concerned about losing all my ripped content).
I am buying a G4 Power Mac. I was wondering if anyone knows what the capabilities are of this computer. Can the RAM be upgraded to 2 or 4GB? Graphics card? As far as I know, Leopard can be installed so I am good with the OS. Oh, and a friend told me the Power Mac is like a Mac Pro but older. Is this true? Like can the Power Mac house multiple processors and hard drives?
View 14 Replies View RelatedHow do I equalise the volume of tracks on iTunes as some quieter than others?
Info:
iPodclassic
I recently acquired 2 PowerMacs 1 for free and the other for cheap. One is a Dual 450mhz and the other is a Dual 500mhz. So now I have 2 dual 450mhz and a dual 500mhz. Is it possible to make a three g4 baby cluster similar to what they did with the giant G5 cluster at Virginia Tech?
How would I do it?
Would it harness the power of all of the processors?
Would it only be useful only for large computations, or would it speed up any and all tasks and apps?
I am just a designer, and think it would be a fun thing to try to do. I have visions of making some sort of antiquated giant beast of a mac. At the very least I figure I could use the three of them together as a heater in the winter!
I have an old G4 and its memory is to the max 1G. I'd like to know what you would reccomed to make it work faster. I've heard that an accelator for the processor is an alternative. Is it really worth it, and does it really work that good? I work with Photoshop all day long and handle very large files.
View 4 Replies View RelatedCan I make my PowerBook G4 wireless? What do I need to buy?
View 14 Replies View RelatedI have a PowerMac G4 I'd like to use as an "experimental" backup machine. I am looking to try and make a RAID setup in it, and I'm no expert with that. I'm wondering if this is even possible, first. I'm also wondering if I can do this with 2 40 gb drives and a 20 gb drive. I want to make it so it appears as 1 drive. I'd be using tiger and a software RAID if that is of any relevance.
Specs:
500 MHz PowerPC G4
640 MB SDRAM
No hard drives currently
I have a 1.2GHz G4 iBook with the stock 256 MB of RAM (which was always too little, I know). What kind of performance boost can I expect if I max out the RAM to 1.5 GB or whatever the maximum is on this model? I'm running Tiger on it and most of my work is simple word processing and web surfing.
View 6 Replies View Related