Mac Pro :: Finding Best Single Quad 2008 RAM Advice
Oct 25, 2008
I have a single Quad core 2008 Mac Pro with 2GB RAM (2x1GB). I am hoping to get more RAM from Crucial. I don't use my Pro for hard core stuff, just Internet, COD4, SecondLife, movies, iPhoto, iTunes etc..
I need to decide whether to get 2x1GB or 2X2GB. The 2x2GB is better value for money but I heard that a 4 matching set ie. 4x1GB would optimize RAM speed. Is this true? Would 4x1GB be faster than 2x1GB + 2x2GB for the applications I use?
View 1 Replies
ADVERTISEMENT
Jun 3, 2010
So I got offered a Quad G5 for $450. It comes with Leopard and I have wanted one for a while.
What are the benefits and detriments of this system?
View 24 Replies
View Related
Aug 17, 2010
I think I will get the base model (3GB) and add a 2x4GB Crucial kit.
My question is this - is there any hit for keeping 2 x 1GB and putting the 2x4GB in (10GB Total)?
My uses are VM (XP for Corel Draw only) and CS5 in the mac side. I also need to do a lot of handbrake to convert my divx encodes to a more mac friendly format.
View 3 Replies
View Related
Sep 2, 2009
I need a new/best card for a G5 quad 2.5. I know it's old (4 years) but it's still used quite a bit - mainly for Photoshop work. The card needs to run 2 x 23" Cinema Displays. I'm not sure if it makes any difference but it has 16GB memory (twice as much as our new 2.93 Quad can take - there's something not quite right there...)
View 12 Replies
View Related
Jan 20, 2010
I've decided to jump on the apple band wagon and purchase an iMac.
I'm planning on ordering the 27-inch quad core i5 but I'm wondering whether it's worth upgrading the processor or increasing the RAM - does anyone use FCS 3 and if so, would it be better to increase the RAM to 8GB+ to run more smoothly.. or does the 4GB RAM basic run fine with FCP 7 and the like?
View 11 Replies
View Related
Mar 22, 2009
I could use some advice on seeking out a good and reliable Raid card for my 2008 Mac Pro. What I want is to make a Raid 0+1 configuration in the Mac Pro using 4 1TB hard drives, which would break down into 2TB of storage that is mirrored on the other 2 internal drives. The Apple store really didn't help and it seems like they make it rather difficult to find items like this. Of course I could do something like a Drobo, but why waste what the Mac Pro was built to take advantage of.
View 1 Replies
View Related
Aug 10, 2010
I have been trying to determine which Backup program is best to use to backup my MacPro to my CalDigit external eSATA VR Mini RAID drives? I have heard lots of good stuff about SuperDuper, Chronosynch, Carbon Copy Cloner...
View 3 Replies
View Related
Dec 26, 2009
I have a new 27" iMac with the i5 processor, Snow Leopard, and 8GB of Ram. Using the secondary display trick, I was able to successfully install Windows 7 (64 bit) with Bootcamp and it is working great. But I also have Parallels Desktop 5 (latest version) and am having troubles with it running Windows 7 from my Bootcamp partition.
I was able to get the virtual machine installed and Windows 7 will boot. However, it takes a LONG time to start the virtual machine and hard drive access is VERY sluggish. To be clear, Parallels itself loads fast but once I start the Windows 7 virtual machine, it takes 5-10 minutes to loads. But even after it loads, any time I do something to access the HD, it is very slow. For example, if I try to play a game, it'll take a long time to load the game but once it gets loaded, it runs great. So I know it's not a memory, CPU, or GPU issue. I have 4 GB or Ram dedicated to the virtual machine.
Now I thought I read something about Parallels having trouble with Windows 7 when using the Bootcamp partition - something about a HFS reading problem from a Bootcamp driving or something?
My Mac is booting into the 32bit kernel of Snow Leopard and the Windows 7 installation is 64 bit? Would that be causing a problem?
I also have Macfuse and Paragon NTFS installed on the Mac. Would those be causing a problem?
Specifically, what do you think could be causing the very slow hard drive access in my virtual machine? I wasn't able to find a solution at the Parallels website.
View 2 Replies
View Related
Feb 10, 2010
I'm fairly new to Mac's and have had this 13" MBP since July of 2009. I've noticed that my laptop will display a black screen and will not respond until I hold the power button and then restart it. Last week I sent it to Apple repair which they had it for a week and could not duplicate the problem. So it was sent back to me un-repaired. I honestly feel as though there is something wrong because at first I thought it wasn't waking up from sleep mode. However since getting the laptop back on Friday I have be paying attention to what's going on.
Since I thought it was a sleep issue, I thought if I went into the System Preferences, Energy Saver and from there I changed both the Battery & Power Adapter settings to NEVER, to keep it from going into Sleep Mode. Well after a little while the laptop will go to the black screen like I've been experiencing but why is the screen going black if I don't have it set to ever going to sleep?
View 19 Replies
View Related
Apr 16, 2010
I've heard several people reference they have drastically improved their gaming performance by optimizing things in Windows 7. While I wait for mine to arrive I would love it if anyone can post their tips and advice on getting the most out of this mediocre GPU.
View 2 Replies
View Related
Jan 27, 2010
I am wondering how I go about removing my Hard Drive from my Power Mac G4 QUicksilver? I don't know the first thing about removal or location of the HD?
It is a 40GB Ultra ATA/66 (5400 rpm)
I would like to remove it and fit it with a Hard Drive case enclosure so I can use it as an extra external for backing up data.
I was told by Tiger Direct that this enclosure should work:
[URL]
I would ultimately be connecting to a macmini for backing up data periodically.
View 2 Replies
View Related
Jun 6, 2008
I am doing a project in which I'm circulating some sensitive material via PDF files. Ideally, I'd love it if the PDF file could expire so that the sensitive material wasn't hanging out on people's computers forever. (the material isn't life or death sensitive-- but it would be great if we could limit the time that it existed "out there")..
I looked into solutions that create PDF files that expire-- but the functionality is expensive ($3000) and requires users download an Acrobat plugin-- which is too cumbersome for the scientists that need to see these PDFs--- any sort of expiration/security/DRM we impose on the files needs to be 100% transparent.
Does anyone know of an inexpensive way to do this with PDF files? (I have a feeling it might not be possible)--or not easily possible for someone without programming expertise like me--- BUT-- on the other hand....
Can anyone suggest another way to distribute documents that would expire?-- someone suggested using Flash or web delivery of some sort? Anyone have ideas on that front? The situation is that we're creating documents that are 40 to 150 pages in length, and have bookmarks for sections in the document-- so if we went to a Flash or Web delivery type of method.. it would have to be quite simple to go from PDF to this format--- and the medium would have to be printable and viewable when not connected to the internet.
View 1 Replies
View Related
Mar 11, 2009
I have the opportunity to get a brand new (with warranty) quad 2.66ghz 2006 model (stock) for ~1600USD
Or I could go for the octo 2008 2.8ghz for ~2300USD
Is the diff in performance worth the extra ~700?
I use photoshop, aperture as well as video editing soft like FCP.
I need to do it now as they will soon run out of the old 2008 2.8 and I don't want to get stuck with the crappy new upgrade with 4core and max 8gb RAM.
View 11 Replies
View Related
Oct 29, 2009
I still have my serious video ram problem set my other post. The apple store wanted $650 to replace my motherboard and the cheapest i found one online was $950, all for a machine that SL will not even support. I am limping along waiting for my i7 iMac to show (Whenever that is)
Here is my question. I am not sure if my data on tis machine is corrupted by my video ram problem so not sure I want to do the firewire transfer, that is if my machine will even last till my new one shows.
I have 2 back-ups a time machine and a super duper backup of 99% of my stuff. If I use my time machine back-up wont it wipe SL OS 10.6 off the new machine? When you do a TM back-up from disk utility from the OS10.5 leopard start-up disc, it says that it will completely wipe your HD clean.
BTW do any of you experts know if my video artifact problem is corrupting my files or just my video, while I am typing this everything looks good unless I look at my menu-bar or dock which is pretty distorted....
View 1 Replies
View Related
Jan 22, 2010
Here's the deal: I have the most recent 17" UMBP, purchased last August, 2009 and got the Snow Leopard Up To Date Disk, did an install on my stock Hard Drive and have been VERY happy with everything for the past few months.
But... All these threads championing the latest Intel SSD G2 have finally gotten to me and, I just purchased the 80GB model from Newegg. It should be here tomorrow.
Now, I ask that you confirm, a specific question about installation from my UTD disk and then advise.
note that I've searched a ton about this subject. It's been answered in so many conflicting ways, I'm running it by you guys once again.
So then, it seems that I can NOT install Snow Leopard from my UTD disk onto the new, fresh Intel SSD installed into my 17" UMBP. This is the case, yes?
A workaround, I figure, would be to install Leopard 10.5 onto the new SSD and then to a clean and erase and then instal of 10.6 on top. I assume the UTD will read 10.5 and let the upgrade proceed.
So, finally, a question: Should I be worried about installing a total of two OSs given that I (cheaply!) opted for the smaller 80GB SSD and that 10.6 doesn't support TRIM?
View 13 Replies
View Related
Jan 5, 2011
In my quest for a Mac Pro ...I have now found a 2008 8 core 3.2ghz that is in the price range of what you can buy a 2.93ghz quad core for now ....if there is any minus other than the warranty to considering that 2008 8 core 3.2ghx 8 core over the 2.93 Ghz quad?
View 11 Replies
View Related
Mar 9, 2008
I have recently purchased the new Mac Pro 3.2Ghz 8 Core Mac Pro (2008 Version). I decided to upgrade all the parts myself. I have upgraded the hard drive from 320GB to 2x 2TB. The memory from 2GB Fully Buffered to 8GB Fully Buffered. Now I am having issue with the graphics cards.
View 1 Replies
View Related
Oct 2, 2009
If so, do you use them and what sound system do you have?
View 2 Replies
View Related
Nov 17, 2009
I know 300 dollars for a bump from C2D/4670 to a i5/4850 is easily one of the best upgrades Apple has offered in a long, long time.... but would I really need it?
I was primarily going to be using the iMac for everyday stuff (word/browsing/etc) and for games occasionally by others. I don't need everything running on ultra with AA on or anything, just visually comparable to PS3/X360. I will be doing a lot of Photoshop/illustrator things as well and might get into video editing.
I was thinking maybe I could hold out on going quad core for a couple years until Macbook Pro lines get it at a reasonable price then I can just use the iMac as a gorgeous led and media hub in the background as I do my work on the Macbook Pro.
I've seen the benchmarks, but how does it work out in real world situations?
What would having Quad cores do for me except help me handle files/render a few seconds faster here and there? I'm sure it's a tremendous boost in things like encoding but how would it help when it comes to image editing?
Is the 4850 a huge bump in specs compared to the 4670? Is the performance gap similar to going from 9400 to the 9600?
View 6 Replies
View Related
Aug 21, 2010
This will primarily be used for application development, primarily with Xcode.
I'll also use it for photography/video (GIMP, and stepping into Aperture and Final Cut Express).
I've ruled out an iMac because I want plenty of expansion options.
I know Xcode scales linearly depending on the number of cores but I am trying to look for a sweet spot in performance and budget. I want something I can grow with for a few years (i.e 3-4).
View 8 Replies
View Related
Oct 22, 2009
So the older Mac Pro's from 2008 have 2 2.8ghz Quad Core Intel Xeon processors, without hyperthreading, for a total of 8 cores, and the top of the line iMac has a Quar Core i7 2,8ghz with hyperthreading for a total of 8 (virtual) cores.
With the ghz being the same but less "real" cores, but probably newer CPU architecture, which CPU will actually be faster?
View 3 Replies
View Related
Aug 8, 2010
Is there a way to boot directly into the desktop from single user mode (without having to re-authenticate as root).
View 2 Replies
View Related
Dec 10, 2009
I recently bought a 17-inch iMac from eBay for a sweet price, it's here now, in literraly new condition. It had Leopard on it, and I wanted to wipe it, and reinstall OSX using my Macbook Pro's Tiger Disc. Wait, isn't that illegal? No. I had Tiger on my Mac, upgraded it to Leopard. Now the Tiger disc is no longer used on the computer. Unfortunately unnoticed by me the Tiger disc was a Macbook Pro install disc. So I had recently upgraded my Macbook Pro to Snow Leopard. Now, the thing was, the Tiger disc and the Leopard upgrade disc was freed up from binding to my Macbook Pro. The iMac came, I wiped it's hard drive using the Macbook Pro Tiger Disc. Whoopsie. I tried installing Tiger on the iMac. No juice. I then learned that that tiger disc was limited to use for the Macbook Pro. So then I pulled out the Snow Leopard disc (Single License), and I 'm installing it on the iMac. This is not legal.
View 4 Replies
View Related
Mar 13, 2009
finding the model number for the 3.2 GHz 2008 Mac Pro, could someone please let me know what it is?
I've managed to find the model number for the 2.8 GHz but no luck for the 3.2.
View 8 Replies
View Related
Jul 7, 2009
Plan on ordering the following card from NewEgg later on today, as I can't find a retailer online that will sell an 8800GT and let me return it if something goes wrong.
View 6 Replies
View Related
Dec 30, 2009
In my old old old excel 2003 when I was searching for some words in excel sheet (e.g. in the column) I could choose "to find all" option. So I saw all the results in the "find" window. In excel 2008 for Mac I can see search results only one by one not altogether. On microsoft site http://www.microsoft.com/mac/help.ms...f-17820d214cef
I couldn't find tha answer also. Does anyone know how to make it in excel 2008 for mac so i could see all search results in the "find" window?
View 3 Replies
View Related
Sep 15, 2009
So I was saving MS office documents to my mac, and had to email an assignment to my teacher whom recieved it and couldn't open it because I then noticed I sent it and it had no file extension so I added .docx and sent it to her.
But I was playing around with the same file and remove the .docx extension and sent it to myself and this time it did have the file extension on my Windows computer
Also I have finder to not show file extensions and they still do, I'm a bit confused about all this.
View 3 Replies
View Related
Dec 6, 2010
I have recently bought a 2008 Mac Pro (8 Core) and have pimped it up with RAM, Vertex SSD and a few 2TB hard drives, on top of that I have pulled the trigger on a Apple LED display however require a graphics card that is compatible for the Apple LED Displays with Mini DisplayPort.
View 6 Replies
View Related
Mar 3, 2009
I was wondering what the limitations were on using one of the 3 keys. Can you be on at the same time as the other person using one of the 3 keys as well?
View 1 Replies
View Related
Apr 29, 2010
I have taken some measurements from my PSU and since I have not seen this sort of info posted anywhere else and it is not in the service manual I thought I'd share it here.
refer attached
Note ** The voltage on pin 4 varies according to the temperature of the PSU and ranges between 1.7V and 2.5V - Higher voltage = lower temperature.
View 2 Replies
View Related
