IMac :: Finding Expert Advice On Migration Of Time Machine Backup To New 27
Oct 29, 2009
I still have my serious video ram problem set my other post. The apple store wanted $650 to replace my motherboard and the cheapest i found one online was $950, all for a machine that SL will not even support. I am limping along waiting for my i7 iMac to show (Whenever that is)
Here is my question. I am not sure if my data on tis machine is corrupted by my video ram problem so not sure I want to do the firewire transfer, that is if my machine will even last till my new one shows.
I have 2 back-ups a time machine and a super duper backup of 99% of my stuff. If I use my time machine back-up wont it wipe SL OS 10.6 off the new machine? When you do a TM back-up from disk utility from the OS10.5 leopard start-up disc, it says that it will completely wipe your HD clean.
BTW do any of you experts know if my video artifact problem is corrupting my files or just my video, while I am typing this everything looks good unless I look at my menu-bar or dock which is pretty distorted....
I have a new 27" iMac with the i5 processor, Snow Leopard, and 8GB of Ram. Using the secondary display trick, I was able to successfully install Windows 7 (64 bit) with Bootcamp and it is working great. But I also have Parallels Desktop 5 (latest version) and am having troubles with it running Windows 7 from my Bootcamp partition.
I was able to get the virtual machine installed and Windows 7 will boot. However, it takes a LONG time to start the virtual machine and hard drive access is VERY sluggish. To be clear, Parallels itself loads fast but once I start the Windows 7 virtual machine, it takes 5-10 minutes to loads. But even after it loads, any time I do something to access the HD, it is very slow. For example, if I try to play a game, it'll take a long time to load the game but once it gets loaded, it runs great. So I know it's not a memory, CPU, or GPU issue. I have 4 GB or Ram dedicated to the virtual machine.
Now I thought I read something about Parallels having trouble with Windows 7 when using the Bootcamp partition - something about a HFS reading problem from a Bootcamp driving or something?
My Mac is booting into the 32bit kernel of Snow Leopard and the Windows 7 installation is 64 bit? Would that be causing a problem?
I also have Macfuse and Paragon NTFS installed on the Mac. Would those be causing a problem?
Specifically, what do you think could be causing the very slow hard drive access in my virtual machine? I wasn't able to find a solution at the Parallels website.
I'm fairly new to Mac's and have had this 13" MBP since July of 2009. I've noticed that my laptop will display a black screen and will not respond until I hold the power button and then restart it. Last week I sent it to Apple repair which they had it for a week and could not duplicate the problem. So it was sent back to me un-repaired. I honestly feel as though there is something wrong because at first I thought it wasn't waking up from sleep mode. However since getting the laptop back on Friday I have be paying attention to what's going on.
Since I thought it was a sleep issue, I thought if I went into the System Preferences, Energy Saver and from there I changed both the Battery & Power Adapter settings to NEVER, to keep it from going into Sleep Mode. Well after a little while the laptop will go to the black screen like I've been experiencing but why is the screen going black if I don't have it set to ever going to sleep?
I am wondering how I go about removing my Hard Drive from my Power Mac G4 QUicksilver? I don't know the first thing about removal or location of the HD?
It is a 40GB Ultra ATA/66 (5400 rpm)
I would like to remove it and fit it with a Hard Drive case enclosure so I can use it as an extra external for backing up data.
I was told by Tiger Direct that this enclosure should work:
[URL]
I would ultimately be connecting to a macmini for backing up data periodically.
I am doing a project in which I'm circulating some sensitive material via PDF files. Ideally, I'd love it if the PDF file could expire so that the sensitive material wasn't hanging out on people's computers forever. (the material isn't life or death sensitive-- but it would be great if we could limit the time that it existed "out there")..
I looked into solutions that create PDF files that expire-- but the functionality is expensive ($3000) and requires users download an Acrobat plugin-- which is too cumbersome for the scientists that need to see these PDFs--- any sort of expiration/security/DRM we impose on the files needs to be 100% transparent.
Does anyone know of an inexpensive way to do this with PDF files? (I have a feeling it might not be possible)--or not easily possible for someone without programming expertise like me--- BUT-- on the other hand....
Can anyone suggest another way to distribute documents that would expire?-- someone suggested using Flash or web delivery of some sort? Anyone have ideas on that front? The situation is that we're creating documents that are 40 to 150 pages in length, and have bookmarks for sections in the document-- so if we went to a Flash or Web delivery type of method.. it would have to be quite simple to go from PDF to this format--- and the medium would have to be printable and viewable when not connected to the internet.
I am on the edge of my seat with excitement as my new iMac should arrive tomorrow and i am just preparing things i.e. clearing desk of junk and doing a little research into migration assistant as i haven't used it before and want to get it right! so i will be migrating from my old MacBook Pro to the iMac using the MacBook Pro's time machine backup. However i have come across a potential snag; The old MacBook Pro has iLife '08 and the new one will have '09. Will i lose '09 when i migrate? any way around this?
I am trying to reinstall clean Snow Leopard on my iMac. I made a partition on my iMac internal HD(on the same physical drive as a system) for Time machine and ran backup.
After that I started up with Snow Leopard DVD, used Disk utility to clean old system partition and installed Snow Leopard.
But when I run Mingration assistant, it doesn't see Time Machine disk to restore. I see TM partitioning in finder and it's look OK, but migration assistant doesn't recognize it.
How I could force migration assitant to recognize backup? Or how I could migrate my setting from this backup?
I have an external hard drives with 3 partitions: 2 are TM backups of my two computers, and the other is just a file storage partition.Â
I am trying to migrate files onto a brand new hard drive from a TM backup. I formatted the new HD and installed OS 10.9 on it, but when I open Migration Assistant, it only recognizes the other computer's TM backup and the file storage partition, not the Macbook TM backup partition. Additionally, this partition (when I view it on my other computer) shows up with the orange USB icon rather than the green TM icon.Â
Does this mean my backup is corrupted? Is there a way to fix this without going back into my laptop and switching back to the old hard drive and wiping out the old backup and backing the whole thing up again?
I used migration assn't to load a Time Machine backup onto a new mac.The first TM backup after that took some time, perhaps not surprising.But the backups thereafter have all taken hours, with huge amounts of "indexing" time. Time to reload TM?
I have been trying to determine which Backup program is best to use to backup my MacPro to my CalDigit external eSATA VR Mini RAID drives? I have heard lots of good stuff about SuperDuper, Chronosynch, Carbon Copy Cloner...
I have a new imac and had parallels windows 7 preinstalled. If I use Migration Assistant with time machine to move all my stuff from old macbook to new imac, will the preintalled parallels be erased.
What should the optimum space of my external HD be, in order to keep my Timemachine backup in? My MBPros HD is 185GB, how big should the external drive in which the TM backup will be made? And why?
Using Migration Assistant, I'm trying to transfer back-up files (whole system) from my Western Digital, External HDD to a new-to-me iMac which I've just purchased used. The External HDD has all my files (hopefully!) from my recently stolen iMac. As you can imagine, the circumstances are a bit unexpected and unsettling.
I've followed Apple's instructions for using MA with an external drive, but get hung up like others before me when it comes time for my new (used) computer to locate the disc from which to transfer the files. I've read the replies to others who have posted with similar difficulties using Snow Leopard, but resolving the issue seems to be just out of reach. Â
Original computer is now unavailable (stolen); it last ran on Snow Leopard, 10.6.3 to 6.8.New computer is used, and also runs on 10.6.8.Both computers are iMac 2009, tho slightly different versions, if that has any bearing on things.I created a temporary account on my new-to-me computer to make the data transfer, so that there wouldn't be an accounts conflict, as others have suggested.Western Digital External HDD, "My Book, Studio Edition," 1TB. I'm using the FireWire 800 port on the iMac. If I need to erase the hard drive on my "new" computer, I'll need a little instruction and hand-holding on that one.Â
Info: iMac (24-inch Early 2009), Mac OS X (10.6.8)
I have done a clean install of Snow Leopard and used migration assistant with time machine to bring system back to original state. My problem is time machine now says I don't have enough space for a backup. The iMac has a new hard drive so I am not sure what is going on. I could always Format and restart TM but I am not real happy about trying that. It will be may last resort.
I have a macbookpro 17" leopard en imac 20" leopard.
I want to use time machine to back my macbook pro but i have no space of my first external(western digital). And normaal external disk ntfs usb not supported by time machine.
So my question is it possible to make my external ntfs disk for time machine or the imac with shared disk or map or something?
I have set my seagate to be used through time machine and I am having the hardest time finding things. After reading a thread I found out how to view my backed up photos in iphoto through time machine. The problem is. We reformatted our IMac, and although I can find the other photos that were saved on there. I cannot find any of the photos that were once in Iphoto, as iphoto is now empty. Do you know where those photos may be or have I lost them all?
I have looked into this a lot already. It is to much that Time Machine backs up every single hour! It would be nice to set it to something like 3 or 5 hours. I have tried a 3rd party app to do this, but... If my computer was off or asleep when it was supposed to back up, it would get an error. It would not just do the backup when i turned it on or when it came out of sleep like stock Time Machine does. I have also seen a way to change the time incraments in the Terminal.(I am very good with it, not a noob) I have tried this and it screws up time machine completely. Maybe it does not work with the newest OS X. By the way... I have a 2010 MacBook Pro, got it 2 months ago.
Does anyone know a solid 3rd party app, that will work seamlessly. Or has anyone changed the time in Terminal and are currently using something different than 1 hour. There is a lot of examples online, but I would like the codeing that you literally used.
I have a desktop mac from mid 2011 and also a 2010 mac mini. I just got a new time capsule and time machine cannot find the new time capsule. I know the new time capsule is working because I have a third machine from late 2012 that found the new time capsule easily. Could it be an operating system issue? I am running 10.9 on the machine that is working, 10.8 on the mid 2011 machine, and 10.7 on the mac mini.Â
Ever since I upgraded to Lion my iMac freezes or nearly freezes for 5 - 10 minutes every hour while Time Machine updates the back up. What to do? I have tried everything I can think of but its only improved from total freeze while Time Machine backs up to freeze with an occasional few seconds of activity.Â
I am getting the following error from Time Machine when doing my first backup. The startup disk being backed up, and the TM disk are both the same size.
Macintosh HD: 465.44 (total); 393.99 (free); 71.45 (free) Time Machine: 465.44 (total); 465.29 (free)
The Time Machine error is: Quote:
"This backup is too large for the backup volume. The backup requires 472.7 GB but only 465.3 GB are available." why would this be? Other disks are excluded from the backup, and Time Machine is telling me that it needs more space than it actually needs. What should I do?
I just got a new MacBook Pro for graduation. I've decided to use my iMac as an external display and use my Macbook Pro as my main computer. My iMac has about 1TB of space while my MacBook has about 500 GB. Since I'll be using my iMac primarily as a external display I was thinking about also using it as an external harddrive so I can backup my data from my Macbook via Time Machine.Is this ok to do? Does anyone advised that I don't? I just want to make sure I don't screw up anything before doing so. BTW I also have a WD external harddrive connected to my iMac.
Info: MacBook Pro (15-inch Late 2011), Mac OS X (10.7.4), Main Computer
I've recently starting having problems with my external HD that I use for my Time Machine backups. I'm not able to repair the drive using Disk Elements, so I want to copy some of my backups stored therein onto my Mac HD before I try reformatting the external HD. However, I get the error message "The volume has the wrong case sensitivity for a backup" when I try dragging the backup folders onto my desktop. Is there any way to salvage the backups before I try reformatting? Â
Info: iMac (21.5-inch Mid 2011), OS X Mountain Lion (10.8.5), External HD: WD Elements 2TB
I have an iMac desktop with OS X version 10.9.4 Mavericks operating system. Processor 2.06 core 2 duo Memory 4GB 1067 MHx startup disk hard drive.Â
Problem is I deleted some photos from my hard drive to free up space, thinking I could access them from my backup drive if I needed to. However, when I try to get the photos through my TimeMchine backup drive, it won't let me, saying it's not the original library. How do I access my old backed up photos?
I bought a new charger for my powerbook g4 a few weeks ago but recently the tip of the charger has been getting very very hot when i take it out (burns my skin to touch)
I just had the main logic board replaced on my powerbook G4 by Apple and the fans always seem to come on now.
After some problems with Time Machine backup, I removed a bunch of stuff from my internal hard drive, reformatted my external HD used for backups, and started a new full backup. Time Machine has been running for about 24 hours and gives me a status of Backing up: xx GB of yy GB. Both xx and yy keep growing (apace) so that I don't believe xx will ever equal yy. Â
To cryptic? Here are real numbers. My internal disk being backed up contains 469.39 GB. Backup status now says Backing up: 685.78GB of 754.42 GB. Both numbers just keep growing. I'm happy to let Time Machine overnight (again) but, really, this can't be normal.
iMAC with OSX10.9.4 ; 8GB ram ; two partitions external disk formatted MAC jurnaled ; connected via Fire Wire or USB2 .
During Backup the sistem get stack and display into the "details window"Â Time machine was unable to complete the backup because unable to complete the backup folder.
This problem happens with USB and Fire Wire. The file backups.backupdb is excluded from virus scanning.
Also happens time to time that (without doing things) both the partitions of the external disk disappaire from the desk-top and a message "the disk must be ejected properly" is displayed.
This two problems are independent une to the other. I have change the backup disk but both the problems persist.
Info: iMac, OS X Mavericks (10.9.4), 8GB ram ; external backup HD
Just got my new MBP which I want to migrate my old one too. Is it better to ethernet the computers up and use the migration assistant or use my last time capsule back up? Or is there no difference?
