PowerPC :: Powerbook G4 - Last Model Before Intel - Kernel Panic
Sep 7, 2010
I have a BIG problem with my old powerbook. I have decided to format it.
It came with tiger, I had installed leopard with an upgrade DVD (not full version).
What I did: I inserted the leopard upgrade dvd and told the pb to initialize and install. After a while I had an error message. It already deleted everything, so when I insert the leopard dvd, it doesn't find any other OS, therefore I can't install the upgrade.
NO PROBLEM, I have the 2 tiger DVD. I insert the first one, pressing C, no. It does not start.
NO PROBLEM, I connect via firewire the powerbook to a macpro. I open the cd 1 of tiger (in the macpro) go to the installation file, and start the installation via firewire. It tells me that I have to partion the disk in Mac os extended with an option "GUI" (something like that).
I have noticed that the GUI mode is for an intel based mac, but mine is ppc...but if I select any other option the system doesn't allow me to continue with the installation of OSX]
I did it, and the installation proceeded well. After a while It asked me for CD2, I inserted it and finished the installation succesfully.
Now I started my powerbook...and is not working, again Kernel Panic...but now there is the OS installed, so...why?
View 12 Replies
ADVERTISEMENT
Feb 15, 2010
I have an eMac (G4, 700mhz, 768mb ram......yes I know it's old and decrepit...but so am I )) and when playing music using iTunes 9.0, my machine crashes with a "kernel panic." I'm only playing songs stored on the hard drive.
View 2 Replies
View Related
May 7, 2010
I bought an iBook G4 a few months ago, with the airport not working, causing kps, but i could still boot up. The repair to this was to open it up, and sandwich a thick piece of paper on the airport card inside the ibook. This solved my airport problem and i could use the internet without any problems. Then one day, I turned on my iBook, and it gave me a bright 'You need to restart your computer'. message with 4 different languages. I restarted it hundreds of times, constantly giving me this kp. Then i formatted my harddrive, re-installed leopard (10.5.6) via target disk (partitioned it, restored the smaller partition with leopard, then booting off that partition in target disk mode). I then deleted that smaller partition with ipartition, resized the main partition, did 3 Disk Repairs (disk utility) and rebooted the iBook. Still the same kernel panic. CMD-S gave me this error: Code: Wed Dec 31 18:12:10 1969 Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000120 PC=0x000000001761039C Latest crash info for cpu 0: Exception state (sv=0x12de2000) PC=0x1761039C; MSR=0x00009030; DAR=0x00000120; DSISR=0x40000000; LR=0x1761275C; R1=0x16DFBAA0; XCP=0x0000000C (0x300 - Data access)......
View 2 Replies
View Related
Sep 15, 2007
I just wanted to know where to find my powerbooks model number? The bottom of it says Model Number:A... But everyone always uses a number that starts with M. I am selling my powerbook and people want to know what the model number is so I need to find it.
View 4 Replies
View Related
Jan 17, 2008
I'm having problems with my powerbook freezing up and needing to be restarted. It's been concluded that when you apply pressure left of the trackpad it freezes with a kernel panic error.
Does anyone know if this can be fixed without a new logicboard? What causes the kernel panic error? Is it allways a hardware problem??
View 1 Replies
View Related
Aug 11, 2008
I have a PowerBook G4, 1.33 GHz, 512MB ram and I am having trouble installing leopard. I have backed up the hard drive and erased it for a clean install. Every time I go to install if freezes at "calculating estimated time remaining" and gives a kernel panic error. I am unable to check the panic log as the hard drive was erased. I have already repaired disk, reset pram etc.
View 2 Replies
View Related
Aug 11, 2010
my used eMac 1.42 ghz with 2gb ram, tiger 10.4.11 began to freeze a few months ago so I cleared the hard drive and reinstalled = worked ok for a while. Now, it is regularly freezing and even locking up when it has been running for a while - when it heats up. Until it cools off a while, on restart or after shutdown, it will hang at the grey screen or display a flashing folder with an alternating finder icon and a question mark - I assume it can't find the OS. After rebooting, I got the report function with this info
View 1 Replies
View Related
Sep 8, 2007
I'm relatively new to Macs and I wanted to try a clean install (or erase and install) on my ibook. I recently purchased a MBP and since Leopard is on the horizon, I wanted to do a "trial run" of installing an updated operating system. I know that you can just hit update instead of doing a clean install, but I've been reading that things run better when you do a fresh install. My old ibook still has Panther on it and I figured I could try to install Tiger on it from my MBP disks.
I know that this represents a violation of the license, but I thought it would be worth it to ensure that I don't make any major mistakes when I'm doing the same procedure with my brand new MBP when Leopard gets released. When I tried booting from the disk from my ibook I got a kernel panic which I interpreted as a sign that it was not a good idea so I abandoned the project. Now every time I try to start my ibook I get another kernel panic and I'm afraid I just broke my old computer.
View 5 Replies
View Related
Feb 10, 2012
Is there a way that I can understand what is causing frequent Kernel Panic crashes on my new iMac?Â
Fri Feb 10 18:01:00 2012panic(cpu 2 caller 0xffffff80002c266d): Kernel trap at 0xffffff800024421e, type 14=page fault, registers:CR0: 0x000000008001003b, CR2: 0xffffff0830070a80, CR3: 0x000000002bd65011, CR4: 0x00000000000606e0RAX: 0xffffff801dd30e80, RBX: 0xffffff8005280c20, RCX: 0x0000000009000000, RDX: 0xffffff8005280c30RSP: 0xffffff8161e32f90, RBP:
[code]....
View 14 Replies
View Related
Mar 26, 2012
How to manage a Kernel panic?
Info:
iMac
View 7 Replies
View Related
Feb 10, 2012
Off-late almost everytime I am getting kernal panics when I shut down my iMac 21 2011 model. After booting back here is the problem report that comes up. I could'nt make head or tail of it, could anybody help me out here. Â
Interval Since Last Panic Report: 591345 sec
Panics Since Last Report: 9
Anonymous UUID: 3C133529-E586-47C7-8799-ACB548B7537AÂ Â
Sat Feb 11 11:11:39 2012
panic(cpu 1 caller 0xffffff80002c266d): Kernel trap at 0xffffff7f820f0ff8, type 14=page fault, registers:
[code]...
Info:
iMac, Mac OS X (10.7.1)
View 3 Replies
View Related
Apr 23, 2012
Ever since I've got this iMac on the office, I've got the occasional kernel panics. At first they seemed to redeem themselfs during runtime, but for a while now, they seem to pop up at boot. And I mean, even not getting the Apple logo and it already freezes. I seem to be having this problem only in a frequency of say... once in two months or so? Â
Today I got it again and it even occured two times in a row, third time the system booted up. I would like to know whats up, I figure this must be a hardware issue since the system doesn't even load up. I'm a bit worried about sending this machine for it's warranty, since I won't have a machine for like 3 weeks until it gets back...
Here's the kernel panic:Â Â
Interval Since Last Panic Report:Â 274968 sec
Panics Since Last Report:Â Â Â Â Â Â Â Â Â 2
Anonymous UUID:Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 26D2C9E5-2CDA-4386-AEEC-A21012A8C927Â Â
Tue Apr 24 08:06:35 2012
[code].....
Info:
iMac (27-inch Mid 2010), Mac OS X (10.7.3)
View 1 Replies
View Related
May 24, 2012
Last night I was in the middle of downloading a file and had a kernal panic (crash report below).When I now log in I either immediately get a black screen ( but can see white spots which are the corners of windows opened) or sometimes I get to my desktop but after a few minutes the screen windows deteriate (repeatative ghosting like an old 80'spop video!) which then become unresponsive. I'm figuring it's had it's day now and hope to get a new iMac tonight. I would like to migrate everything but am unsure whether this is a hard drive failure ( in which case the migration is probably out of the window) or something else?Â
Interval Since Last Panic Report: 2699211 sec
Panics Since Last Report: 4
Anonymous UUID: 3489AC4E-2DC6-4498-AF01-5828C8995EB4
[code].....
View 6 Replies
View Related
Sep 2, 2014
My iMac keeps restarting with a kernel problem error message. A while ago I had the same problem soIÂ reinstalled Mavericks and all was fine for a while now the problem has returned. Why did it start in the first place and more importantly can I stop it?...it just restarted again as I'm writing this.
Info:
iMac, OS X Mavericks (10.9.4)
View 4 Replies
View Related
Jun 15, 2010
I have a 15" PB Aluminum 1.5ghz with 1GB of ram. Just bought off a friend and when I did a fresh erase and install of OS X 10.4, repaired permissions and rebooted I get the kernel error telling me to hold down the power button and restart. So I did this and when it restarts I get the grey apple background with a load of writing all over it. How do I try and figure out what is causing the problem. I also ran tech tool pro from the DVD and that says everything has passed such as processor, memory etc
View 7 Replies
View Related
Feb 9, 2012
My mac is 2.7ghz i5 with a 1TB HD. It has crashed about five times this week. Two kernel panics, two freezes where I can't move anything, and once it just plain shut off. I've heard that it could be the network card causing the kernel panics. I do know that the airport card has been performing very poorly but I assumed it was just because there are about three walls between my computer and the router.
Interval Since Last Panic Report:Â 1012639 sec
Panics Since Last Report:Â Â Â Â Â Â Â Â Â 1
Anonymous UUID:Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â F9F8A660-5B62-428C-8ECE-895C14C009DEÂ
Wed Feb 1 19:38:44 2012
[code]....
Info:
iMac, iOS 5.0.1
View 6 Replies
View Related
Apr 17, 2012
a bit complicated.  I have a 3 year old iMac, Snow Leopard 10.5.2 on the dics, but I updated it so..a pretty receent version of Snow Leopard. I had had kernel panics before- it turned out to be a bad RAM chip, replaced it and it fixed the problem.Â
This time, I was hoping it was the same. I got a new RAM chip, swapped them out and ID'ed the bad one. Reseated the RAM. Probelm is, when I was trying to fix the problem, I had booted in Safe Mode. Now the iMac starts up normally- the chime, the Apple- AND the Safe Mode bar.
Which progresses for about 5 seconds before another Kernel panic descends. This happens whether the keyboard is connected or not. At this point the Safe Mode at startup bugs me more than the kernel panics! Sigh.Â
I wonder if there's any key combo on startup I could try to at least get out of Safe Mode before Kernel panic sets in. When my laptop has a kernel panic i can usually repair with Disk repair on CD.  I realize this sounds hopeless! And i need it repaired, but money is an issue.
View 1 Replies
View Related
Apr 20, 2012
What can I do when my computer doesn't boot and it appears a message "panic kernel"?
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7)
View 5 Replies
View Related
May 23, 2012
i've been having some problems with my 27" iMac (2011). I was playing a game (Diablo 3), when suddenly there was a kernel panic, so I had restart my computer. I started the game again, and there was another panic. After that, every time I login everything works great for 5 minutes, then the screen goes black, and it just stays there, nothing happens. I've tried restarting the computer many times, but it just keeps crashing.
Info:
iMac, Mac OS X (10.7.4)
View 14 Replies
View Related
Jun 25, 2012
PeerGuardian appears to be causing kernel panic and my iMac to continuously srash, and yet I cannot find it to uninstall - Spotlight yields no results at all, and I have removed it from login items under System Preferences / Accounts. I want to remove PeerGuardian completely to see if this resolves the kernel panic but don't see (a) how I can, given that I can't find it anywhere and/or (b) how it can be causing a kernel panic if I can't find it anywhere!Â
Info:
Intel iMac 20" 2.4ghz, Mac OS X (10.5.4)
View 3 Replies
View Related
Jun 27, 2012
iMac 2.16 GHZ IntelCore 2 Duo with 2GB RAM running OS 10.5.8. After switching from one user account to the Admin User Account the kernel panic message 'You need to restart you computer' appeared. After holding down the power button and restarting, I tried to login to the same account but got the same error message. Tried again and still same message. I then restarted using the install disk and used Disk Utility to repair the disk. Â
Disk Utility reported missing thread record, incorrect number of threads,invalid volume file count (It should be 823873 instead of 823874) incorrect number of extended attributres and missing directory record and then it continuted to repair the disk and then showed invalid volume file count error again but this time it displayed (It should be 823874 instead of 823873) For some reason the numbers were swapped round from the earlier message. It continued to repair and reported that the Volume Macintosh HD appears to be OK.Â
I restarted the mac and logged into Admin User Account and got the 'You need to restart your computer' message again. After restarting I logged into the other 3 user accounts and they all work perfectly but each time I log onto the Admin User Account the 'restart computer' message appears. Is there any way to repair the Admin User Account without having to re-format the hard drive and re-install everything from scratch?
Info:
iMac, Mac OS X (10.5.8)
View 14 Replies
View Related
Jul 2, 2012
i need help locating my files after reinstalling Mac os x due to a kernel panic. Can I back my iMac up from my ipod?
Info:
iMac, Mac OS X (10.6.4)
View 1 Replies
View Related
Aug 30, 2009
Sounds like a desperate need for some Kentucky Fried Chicken while waiting for your 10.6 install.
View 2 Replies
View Related
Jun 29, 2012
I am just starting a new job and have been getting extreme speed issues on my computer followed by this recent kernel panic. I am running 4 2 TB G Speeds through eSATA. My computer went down, when I brought it back up Final Cut Pro took 5-10 minutes just to simply open. I wasn't even attempting to open a certain project. Any ideas based on the attached Kernel report? [code]
Info:
Mac Pro
View 1 Replies
View Related
Nov 7, 2010
I'm getting a kernel panic at start up and the optical drive wont read the start up DVD. I can boot up windows via bootcamp and the machine runs fine. I'm not getting any red LED's on my risers, so i'm assuming its not a RAM issue. I have a Mac Pro 8-core (2008) stock, just added 10 gigs of RAM.
View 1 Replies
View Related
Nov 26, 2010
For the past few days (never happened before) my apps started crashing continuously and kernel panic screen started appearing very frequently. I am still wondering what may be the cause of it, then I tested my RAM with Rember, and this log showed up:
Memtest version 4.22 (64-bit)
Copyright (C) 2004 Charles Cazabon
Copyright (C) 2004-2008 Tony Scaminaci (Macintosh port)
Licensed under the GNU General Public License version 2 only
View 3 Replies
View Related
Jul 7, 2007
I know a lot of people dread this, let alone ask this. But how do you cause a voluntary kernel panic in 10.4?
View 8 Replies
View Related
Aug 8, 2008
I get kernel panics after a few min's of running the Mac pro. The ram are perfectly paired (2x 4gb in both slots, both in the first 2) and I get issues with it it seems. It started to happen as of today but didn't happen the days before. Nothing was changed in the configs or software.
View 3 Replies
View Related
Mar 18, 2009
I recently got a Dell 2209WA with built in USB hub. and great i thought, i can manage the USB ports on my macbook a bit more effectively. But it seems when i pull the USB cable when i want to go portable, it gets a KP, at the moment i suspect it has something to do with the logitech wireless adaptor i have plugged into the monitor. it exhibits these issues when the monitor is turned off as well.
I have another USB hub, but i pretty much use it exclusively for my external hard drives (i don't really like to keep it plugged in all the time, if powered up for some reason the drives spin up in the middle of the night even when the macbook is sleeping) and it does nothing like this when the adaptor is plugged into that.
View 2 Replies
View Related
Apr 11, 2009
I've had two of these in less than 24 hours on this new machine. I was able to work in Photoshop and Aperture fine, but the minute I started watching Hulu videos I started getting these. Oddly enough. I zapped PRAM and repaired permissions, and haven't had another one yet... but should I just take it back now while I'm still in my 14 days?
Here is the log:
Mac OS version: 9G3553
Kernel version:
Darwin Kernel Version 9.6.3: Tue Jan 20 18:26:40 PST 2009; root:xnu-1228.10.33~1/RELEASE_I386
System model name: MacPro4,1 (Mac-F221BEC8)
View 9 Replies
View Related
