I'm getting a kernel panic at start up and the optical drive wont read the start up DVD. I can boot up windows via bootcamp and the machine runs fine. I'm not getting any red LED's on my risers, so i'm assuming its not a RAM issue. I have a Mac Pro 8-core (2008) stock, just added 10 gigs of RAM.
View 1 Replies
My Mac Pro (late 2006) now has kernel panics at startup. Problem first happened while computer was in sleep mode, a second kernel panic happened about 10-15 minutes after reboot the first time. Now it happens at startup every time. Zapped PRAM multiple times to no effect. Tested original 10.4 install disk, as well as 10.5 and 10.6 upgrade disks with all external connections removed and from a cold boot. The 10.4 disk causes the kernel panic every time. The 10.5 and 10.6 disks do too, if the C or D key is depressed. The upgrade disks will hang in a gray screen (10.6) or pale blue screen (10.5) with no keys depressed--computer keeps running but fails to boot. Also tested the RAM (4 X 512 MB) in different combinations of one pair in the top riser board (and switched risers, and removed lower board completely). All resulted in kernel panics. Next option?
View 10 Replies View RelatedI'm trying to fix my iMac. I am getting a kernel panic from start up! I've tried troubleshooting from the apple website. I've tried holding C. I only have two disk. Mac OS S install disc 1 & 2. I've tried holding Control, Option, R, and P.
View 5 Replies View RelatedI have a 2 year old imac that was working fine until last night. I had just installed the "raw photo compatibility" update (although i think this is just coincidence) and shut my computer down.
When i booted it up again 3 hours later, i got to my desktop but instead of seeing my usual 3 partitions (macintosh, home, windows xp) I only saw 2 - windows xp was missing. Not only this but my system was continuously beachballing.
I was unable to force quit so after a few minutes i held in the power button for 4 seconds until it shut down. Upon reboot, i was (and still am) only able to get to the white screen with apple logo that you get on boot up. On this screen you have a little gear spinning round. This spins for some time then just as my computer would usually boot into the O/S, the gear stops and it hangs.
I am running the latest version of Leopard and so far i have:
Tried diagnostics mode - all diagnostics come back ok, even in extended test
Single user mode - tried FSCK to repair, first time it made changes to drive, after that nothing.
Tried safe mode - wont boot
Tried booting from leopard cd - still hangs in same place
Tried booting from tiger on an external hdd - at same place it usually hangs, it kernel panics instead
Swapped ram out - exactly the same problem when using someone elses ram
I am running a quad core G5 PPC. I updated to 10.5.1 last week when it was made available and had no problems until yesterday. I tried to empty the trash and immediately had a kernel panic. I restarted and that is when the problem became more apparent then a simple restart! The Kernel Panic continued to repeat itself on the startup screen. I called apple support and went thru all the steps with them including trying to boot from the OS X 10.5 disk, in safe mode, as a target, trying to reset the (I guess I forgot what we were resetting but I was told to hold down Apple-R and Option-P) as well as opening the case and holding down the small button underneath the RAM. Anyway, nothing worked. Even in target disk mode, it made my G4 Powerbook running as the main pop up with a kernel panic! I cant get to the finder to see what the kernel panic parameters are.
Information:
G5 Power Mac
Mac OS X (10.5.1)
PPC
I have an iMac that I bought in October 2007. All of a sudden, when I try to boot up my computer, I get a kernel panic. Can't get any further than the kernel panic even though I keep on re-booting.
View 4 Replies View RelatedMy husband's mac book started acting weird while I was out own town. He was unable to get it to start up, but eventually did, backed up his important data, and then I had him attempt to verify and repair permissions. I guess it indicated there were errors but could not fix them. Once again, his macbook stalls at start up and will not get past the gray screen with the apple and the wheel. Last night at this point it kernel panicked.
Today (since I'm back now) I tried to boot it in safe mode, and it still hangs. I zapped the PRAM, and that didn't help. My next step is to try and boot from his install discs, when he finds them. My question is, should I bother trying to verify and repair, or should I just do an archive & install (if possible) or an erase and install (if necessary)? This is a mac book from 06-ish running 10.4.? My hubby claims to not have installed or updated anything recently.
I moved over to an IMac from windows about 2 years ago and have never had any issues, until now. Whenever I boot my IMac I get a 'kernel panic' message (grey screen with 'you need to restart your computer in 4 languages). I cannot boot from my Mac HD, nor from a bootable superduper backup external HD, nor from my orginal SL or Leopard disk. All go into the kernel panic. I can however boot from my bootcamp Windows Vista partition. Tried booting into safe mode also does not work and gives the kernel panic screen. I have run both the standard and extended hardware tests and both have no errors. I booted in single user mode (that still works)and done a fcsk and unmount and both are without errors. Also done RAM flash. In single user modei can not find a PanicReporter directory or panic log. Cannot even install a fresh SL copy as my DVD wont boot either.
View 3 Replies View RelatedYesterday I was helping someone getting to know their MacBook Pro (early 2008, Intel core 2 duo 2.4GHz, Mac OS X 10.5.2). I installed Perian and Flip4Mac and Firefox 3.6. I also checked for updates because she's on a very old version. I tried downloading the updates, but because we had a very bad internet connection I stopped the download quite early on and told her to do it at home. However after I left she tried to shut down the computer but it hanged. She manually shut it down using the power button. When she tried to turn it on again she got a kernel panic message saying she should reboot. This however didn't work.
Now I've tried all sorts of things. I've removed Perian and Flip4Mac manually. I did a disk verification (all was well) and a permissions verification and repair. I tried booting in safe mode (still won't boot) clearing the SMC and resetting PRAM, none of it worked. I just wanted to check here first before either taking it to an Apple store or reinstalling Mac OS X. I've read on forums about hardware failing (RAM mostly). No idea if that's the case. I tried a hardware test, but I don't have her DVDs and used my own with version 10.5.5. The Standard test said it was all ok, but the extended test seemed to hang. I could ask for her own DVDs which I will need anyway if I'm going to reinstall Mac OS X.
Some details of the kernel panic:
The error code is: 0x000000010
Apart from that it says the following:
Backtrace terminated-invalid frame pointer 0
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AppleIntelCPUPowerManagement(76.2.0)@0x2e63c000->0x2e65afff
And later on it says: Mac OS version: Not yet set.
And of course it shows some more info with lots of hex codes, I can type them out for you if you like, but I read elsewhere that the error message is usually not very useful. Would you recommend going to an Apple store to see if the RAM is faulty? Or do a reinstall of Mac OS X?
Yesterday my wife's IMac (Bought in 2007, running SL)started to "Crash" Safari, and firefox were freezing and then the problem expanded to other programs like itunes. So this is what I did.
1. Copied all music and pictures to an external drive
2. Used the installation disk to restore a backup from time machine
3. Left it overnight
4. This morning the Imac said restore successful please restart
5. I did and then I got this grey screen with a picture of the power button on it telling me in lots of different languages to press the power button and restart.
6. I have done this about ten times now and it just keeps coming back
I am running the Imac with a bluetooth keyboard but do have access to a wired one. No idea if that makes a difference just thought I would mention it.
I'm getting a kernel panic at start up and my mac wont boot up. I don't think its the RAM because the LED's are not red on the risers. When I start up holding "option" and select to boot up from the DVD it goes to the apple logo and on to the kernel panic. When I start up windows via bootcamp everything works fine. I've fsck. resetting PRAM, NVRam, nothing seems to work.
View 1 Replies View RelatedLast night I was defraging my G4 OS Tiger 10.4.11 and at about 53% the power went out. Now all I get at start up is the Kernel Panic screen. What should be my first step?
Info:
PowerMac, Mac OS X (10.4.11)
I'm relatively new to Macs and I wanted to try a clean install (or erase and install) on my ibook. I recently purchased a MBP and since Leopard is on the horizon, I wanted to do a "trial run" of installing an updated operating system. I know that you can just hit update instead of doing a clean install, but I've been reading that things run better when you do a fresh install. My old ibook still has Panther on it and I figured I could try to install Tiger on it from my MBP disks.
I know that this represents a violation of the license, but I thought it would be worth it to ensure that I don't make any major mistakes when I'm doing the same procedure with my brand new MBP when Leopard gets released. When I tried booting from the disk from my ibook I got a kernel panic which I interpreted as a sign that it was not a good idea so I abandoned the project. Now every time I try to start my ibook I get another kernel panic and I'm afraid I just broke my old computer.
Sounds like a desperate need for some Kentucky Fried Chicken while waiting for your 10.6 install.
View 2 Replies View RelatedI am just starting a new job and have been getting extreme speed issues on my computer followed by this recent kernel panic. I am running 4 2 TB G Speeds through eSATA. My computer went down, when I brought it back up Final Cut Pro took 5-10 minutes just to simply open. I wasn't even attempting to open a certain project. Any ideas based on the attached Kernel report? [code]
Info:
Mac Pro
For the past few days (never happened before) my apps started crashing continuously and kernel panic screen started appearing very frequently. I am still wondering what may be the cause of it, then I tested my RAM with Rember, and this log showed up:
Memtest version 4.22 (64-bit)
Copyright (C) 2004 Charles Cazabon
Copyright (C) 2004-2008 Tony Scaminaci (Macintosh port)
Licensed under the GNU General Public License version 2 only
I know a lot of people dread this, let alone ask this. But how do you cause a voluntary kernel panic in 10.4?
View 8 Replies View RelatedI get kernel panics after a few min's of running the Mac pro. The ram are perfectly paired (2x 4gb in both slots, both in the first 2) and I get issues with it it seems. It started to happen as of today but didn't happen the days before. Nothing was changed in the configs or software.
View 3 Replies View RelatedI recently got a Dell 2209WA with built in USB hub. and great i thought, i can manage the USB ports on my macbook a bit more effectively. But it seems when i pull the USB cable when i want to go portable, it gets a KP, at the moment i suspect it has something to do with the logitech wireless adaptor i have plugged into the monitor. it exhibits these issues when the monitor is turned off as well.
I have another USB hub, but i pretty much use it exclusively for my external hard drives (i don't really like to keep it plugged in all the time, if powered up for some reason the drives spin up in the middle of the night even when the macbook is sleeping) and it does nothing like this when the adaptor is plugged into that.
I've had two of these in less than 24 hours on this new machine. I was able to work in Photoshop and Aperture fine, but the minute I started watching Hulu videos I started getting these. Oddly enough. I zapped PRAM and repaired permissions, and haven't had another one yet... but should I just take it back now while I'm still in my 14 days?
Here is the log:
Mac OS version: 9G3553
Kernel version:
Darwin Kernel Version 9.6.3: Tue Jan 20 18:26:40 PST 2009; root:xnu-1228.10.33~1/RELEASE_I386
System model name: MacPro4,1 (Mac-F221BEC8)
Happy for my macbook pro for almost two years. Lately it's been unstable and freezes sometimes. Two days ago it went to kernal panic and shows kernal panic screen and asks for restart everytime it restarts. It won't start on DVD or safe mode (it just hangs there and keeps spinning). For single user mode, it first worked and I was able to remove login items, but it froze again and now generates the following panic log. All the hardware have been the same and I have installed vpn a few months ago and dropbox last week.
Jettinsoning kernel linker.
Resetting IOCatalogue.
GFX0: family specific matching fails
Matching service count =1
Matching service count =2
Matching service count =2
Matching service count =2
Matching service count =2
Matching service count =2
May 3 11:51:15 localhost DirectoryService[20]: Launched version 5.6 (v514.24)
Previous shutdown Cause: 3
ath_attach: devid 0x24
yukon: Eithernet address xxxxxxx
Override HT40 Powers. EEPROM Version is 14.4. Device Type 5
NVDANV50HAL loaded and registered.
GFX0: family specific matching fails
GFX0: family specific matching fails
GFX0: family specific matching fails
Matching service count = 0
May 3 11:51:24 localhost configd[28]: Error: No interface name for AirPort_Athr5424ab
May 3 11:51:24 localhost configd[28]: Error: ioPublishedDriverCallback() failed to initDeviceFromService()
May 3 11:51:24 localhost mDNSResponder mDNSResponder-176.3 (Sep 30 2008 16:59:38)[48]: starting
AirPort_Athr5424ab: Ethernet address xxxxx
AirPort: Link down on en1
May 3 11:51:32 xxxcomputer fseventsd[72]: event logs in /.fseventsd out of sync with volume. destroying old logs. (13 218 724)
AirPort: Link up on en1
AppleYukon2: 000000.00000 sk98osx_dnet - recovering from missed interrupt
May 3 11:51:32 xxxcomputer fseventsd[72]: log dir: /.fseventsd getting new uuid: xxxxx
May 3 11:51:32 xxxcomputer ntpdate[88]: can't find host time.apple.com
May 3 11:51:32 xxxcomputer ntpdate[88]: no servers can be used, exiting
AppleYukon2: 0000,0000 sk98osx_dnet - recovering from missed interrupt
May 3 11:51:41 xxxcomputer /usr/sbin/ocspd[97]: starting
May 3 11:51:32 xxxcomputer /system/library/coreservers/loginwindow.app/contents/macos/loginwindow[68]: login window application started - threaded auth
ciscoVPN: attempting to attach to all available ethernet interfaces.
ciscoVPN: checking if we are already attached to interface: en1
ciscoVPN: no, not yet attached to interface: en1
ciscoVPN: interface: en1, filter attached.
ciscoVPN: current MTU for en1 is 1500, saving it.
panic(cpu 0 caller 0x001A9C68): Kernel trap at 0x0019ca06, type 14=page fault, registers:
CR0: 0x80010033, CR2: 0x00000000, CR3: 0x01b51000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x00000000, ECX: 0x0549c004, EDX: 0x00000000
CR2: 0x00000000, EBP: 0x36077b58, ESI: 0x00000000, EDI: 0x36077c3c
EFL: 0x00010246, EIP: 0x0019ca06, CS: 0x00000000, DS: 0x00000010
Error code: 0x00000000
Debugger called: <panic>
Backtrace (CPU 0), Frame: return address (4 potential args on stack)
I was updating my mothers ibook G4 and after the two restarts it gives me this. Is there any way to get past this she does not have a back up of her HD.
View 6 Replies View RelatedI'm trying to get OSX installed onto my new intel x25-m SSD, but it just won't happen. Trying to boot from my install DVD that came with my new Mac Pro throws up a kernel panic after about a minute or two of loading.
Trying to boot from my store-bought Leopard DVD does nothing. After restarting it just sits there and the DVD stops spinning after a couple minutes. Is there another way I can turn my new SSD into the boot drive? This is driving me nuts.
I'm new to mac so everything you say try to be as specific as possible.
i bought a used ibook g4 on ebay. i am pretty sure it is running OS X 10.1 if that matters but i'm not sure on that.
After messing around for a while i turn it off and back on a while later and when it was turning on it came to the gray screen and had a folder with a question mark then the little dude with the nice smilie face but an error comes up.
My wife was attempting to load the most recent updates onto her MB, the update failed (not sure exactly which one) and now OSX won't load. She gets a "Version mis-match between Kernel and CPU PM" panic and it won't go any farther - neither in safe mode nor single user mode. I booted off of my computer's recovery disc (I haven't found hers yet - we recently moved) and used Disk Utility to repair the disk and the disk permissions, but it still won't load.
View 6 Replies View Relatedi go the following kernel panic. it would be great if you could me identify why i am gettin these panic.I have the mid 2007 white macbook
View 15 Replies View RelatedI did a quick search through the forum and didn't see anything specific about this problem. It just started to occur yesterday and nothing has changed on the computer. (Nothing new installed and no external hardware plugged in.)
Basically, it just pops up with the grey screen advising to restart. Sometimes it occurs after waking from sleep, sometimes it occurs after starting up, and sometimes it occurs in the middle of a task. I haven't noticed a specific pattern.
I ran the AHT and everything passed. I also ran Rember and the memory seemed fine in the test. I reset the PRAM and VRAM and the SMC after speaking with Apple. Finally, I reinstalled the OSX clean on the machine and the panics are still occurring.
This is the last panic report from the Macbook 1,1 2.0 with 1.25 GB RAM. I'm hoping it is the RAM and not something with the logic board, but am not sure if that can be ascertained without finding replacement RAM first.
Mac G5 ppc OSX10.4.11
Starting up from any boot disk will give me a kernel panic forcing me to hard restart.
Background:
After many freezes I ran disk utility and I get:
Checking Catalog file.
Invalid index key
The volume Macintosh HD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
So I use my wife's Imac startup disk to boot it in order to repair but I get the dreadfull death screen (I know how to press the C)
I'm thinking maybe it's because her disk if for her Intel proc so I go and buy a copy of disk warrior 4, and same problem.
I tried to play world of warcraft so after going through all possible trouble shooting steps such as disc repair, reset pram and everything else I did an archive and reinstalled my OS. At first this seemed to work but then I could not even open safari with out the computer locking up So I erased everything and did a fresh install, the installation had no problems I did a disk check and everything before installing everything was good.Then I get to the welcome animation screen and on the first word the computer locked up at the graphics and the only way to get it off was to hold the power button and restart. Now I am stuck in a kernel panic and can not do anything. The only thing it will allow me to do is get into single user mode, I can not even boot to the CD or disk utility it just keeps giving me the kernel panic when i try and hold shift, c, or d while booting up.
View 1 Replies View RelatedI'm getting this Kernel Panic randomly. What might be causing it?
View 6 Replies View Related
