Intel Mac :: Locating Files After Reinstalling It Due To A Kernel Panic?
Jul 2, 2012i need help locating my files after reinstalling Mac os x due to a kernel panic. Can I back my iMac up from my ipod?
Info:
iMac, Mac OS X (10.6.4)
i need help locating my files after reinstalling Mac os x due to a kernel panic. Can I back my iMac up from my ipod?
Info:
iMac, Mac OS X (10.6.4)
I'm averaging about 2-3 kernel panic "crashes" daily. I took my MP to the local Apple Store. They ran all of their tests and could not find a thing wrong with it. I've purchased Tech Tool Pro. The TTP diagnostics have come up with nothing. I use machine at work primarily for video editing/compression/authoring. The kernel panic(s) seem to occur when I'm outputting or compressing video files from Final Cut or Sorenson Squeeze.
Here are some of my basic machine specs:
2 x Quad Intel Xeon
5 GB 667 MHz DDR@ FB-DIMM
Video Card: ATI Radeon X1900
Serial ATA HDDs
I just received a replacement computer for a defective machine. Its a brand new macbook pro. I transferred old files with time machine only to have the new machine resume a series of kernel panics that caused the replacement. The Genius Bar asked me to reload everything from scratch so as not to transfer corrupt files. I did so -- with the most up to date dmg files out there, and 4 days later had another kernel panic. I do not know what it means but have pasted it below.
View 11 Replies View RelatedIs there a way that I can understand what is causing frequent Kernel Panic crashes on my new iMac?Â
Fri Feb 10 18:01:00 2012panic(cpu 2 caller 0xffffff80002c266d): Kernel trap at 0xffffff800024421e, type 14=page fault, registers:CR0: 0x000000008001003b, CR2: 0xffffff0830070a80, CR3: 0x000000002bd65011, CR4: 0x00000000000606e0RAX: 0xffffff801dd30e80, RBX: 0xffffff8005280c20, RCX: 0x0000000009000000, RDX: 0xffffff8005280c30RSP: 0xffffff8161e32f90, RBP:
[code]....
How to manage a Kernel panic?
Info:
iMac
Off-late almost everytime I am getting kernal panics when I shut down my iMac 21 2011 model. After booting back here is the problem report that comes up. I could'nt make head or tail of it, could anybody help me out here. Â
Interval Since Last Panic Report: 591345 sec
Panics Since Last Report: 9
Anonymous UUID: 3C133529-E586-47C7-8799-ACB548B7537AÂ Â
Sat Feb 11 11:11:39 2012
panic(cpu 1 caller 0xffffff80002c266d): Kernel trap at 0xffffff7f820f0ff8, type 14=page fault, registers:
[code]...
Info:
iMac, Mac OS X (10.7.1)
Ever since I've got this iMac on the office, I've got the occasional kernel panics. At first they seemed to redeem themselfs during runtime, but for a while now, they seem to pop up at boot. And I mean, even not getting the Apple logo and it already freezes. I seem to be having this problem only in a frequency of say... once in two months or so? Â
Today I got it again and it even occured two times in a row, third time the system booted up. I would like to know whats up, I figure this must be a hardware issue since the system doesn't even load up. I'm a bit worried about sending this machine for it's warranty, since I won't have a machine for like 3 weeks until it gets back...
Here's the kernel panic:Â Â
Interval Since Last Panic Report:Â 274968 sec
Panics Since Last Report:Â Â Â Â Â Â Â Â Â 2
Anonymous UUID:Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 26D2C9E5-2CDA-4386-AEEC-A21012A8C927Â Â
Tue Apr 24 08:06:35 2012
[code].....
Info:
iMac (27-inch Mid 2010), Mac OS X (10.7.3)
Last night I was in the middle of downloading a file and had a kernal panic (crash report below).When I now log in I either immediately get a black screen ( but can see white spots which are the corners of windows opened) or sometimes I get to my desktop but after a few minutes the screen windows deteriate (repeatative ghosting like an old 80'spop video!) which then become unresponsive. I'm figuring it's had it's day now and hope to get a new iMac tonight. I would like to migrate everything but am unsure whether this is a hard drive failure ( in which case the migration is probably out of the window) or something else?Â
Interval Since Last Panic Report: 2699211 sec
Panics Since Last Report: 4
Anonymous UUID: 3489AC4E-2DC6-4498-AF01-5828C8995EB4
[code].....
My iMac keeps restarting with a kernel problem error message. A while ago I had the same problem soIÂ reinstalled Mavericks and all was fine for a while now the problem has returned. Why did it start in the first place and more importantly can I stop it?...it just restarted again as I'm writing this.
Info:
iMac, OS X Mavericks (10.9.4)
I am trying to transfer music and photos from my Windows laptop to my new iMac. Â
All the files are stored under my User name on the laptop, but the Aisstant Manager only showes files located on the C: drive. I can also see the boxes Users and Administrator, but they are both empty. Â
How do I run the Assistant Manager so that it located all the files on my laptop?
Info:
iPad 2
I have a BIG problem with my old powerbook. I have decided to format it.
It came with tiger, I had installed leopard with an upgrade DVD (not full version).
What I did: I inserted the leopard upgrade dvd and told the pb to initialize and install. After a while I had an error message. It already deleted everything, so when I insert the leopard dvd, it doesn't find any other OS, therefore I can't install the upgrade.
NO PROBLEM, I have the 2 tiger DVD. I insert the first one, pressing C, no. It does not start.
NO PROBLEM, I connect via firewire the powerbook to a macpro. I open the cd 1 of tiger (in the macpro) go to the installation file, and start the installation via firewire. It tells me that I have to partion the disk in Mac os extended with an option "GUI" (something like that).
I have noticed that the GUI mode is for an intel based mac, but mine is ppc...but if I select any other option the system doesn't allow me to continue with the installation of OSX]
I did it, and the installation proceeded well. After a while It asked me for CD2, I inserted it and finished the installation succesfully.
Now I started my powerbook...and is not working, again Kernel Panic...but now there is the OS installed, so...why?
My mac is 2.7ghz i5 with a 1TB HD. It has crashed about five times this week. Two kernel panics, two freezes where I can't move anything, and once it just plain shut off. I've heard that it could be the network card causing the kernel panics. I do know that the airport card has been performing very poorly but I assumed it was just because there are about three walls between my computer and the router.
Interval Since Last Panic Report:Â 1012639 sec
Panics Since Last Report:Â Â Â Â Â Â Â Â Â 1
Anonymous UUID:Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â F9F8A660-5B62-428C-8ECE-895C14C009DEÂ
Wed Feb 1 19:38:44 2012
[code]....
Info:
iMac, iOS 5.0.1
a bit complicated.  I have a 3 year old iMac, Snow Leopard 10.5.2 on the dics, but I updated it so..a pretty receent version of Snow Leopard. I had had kernel panics before- it turned out to be a bad RAM chip, replaced it and it fixed the problem.Â
This time, I was hoping it was the same. I got a new RAM chip, swapped them out and ID'ed the bad one. Reseated the RAM. Probelm is, when I was trying to fix the problem, I had booted in Safe Mode. Now the iMac starts up normally- the chime, the Apple- AND the Safe Mode bar.
Which progresses for about 5 seconds before another Kernel panic descends. This happens whether the keyboard is connected or not. At this point the Safe Mode at startup bugs me more than the kernel panics! Sigh.Â
I wonder if there's any key combo on startup I could try to at least get out of Safe Mode before Kernel panic sets in. When my laptop has a kernel panic i can usually repair with Disk repair on CD.  I realize this sounds hopeless! And i need it repaired, but money is an issue.
What can I do when my computer doesn't boot and it appears a message "panic kernel"?
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7)
i've been having some problems with my 27" iMac (2011). I was playing a game (Diablo 3), when suddenly there was a kernel panic, so I had restart my computer. I started the game again, and there was another panic. After that, every time I login everything works great for 5 minutes, then the screen goes black, and it just stays there, nothing happens. I've tried restarting the computer many times, but it just keeps crashing.
Info:
iMac, Mac OS X (10.7.4)
PeerGuardian appears to be causing kernel panic and my iMac to continuously srash, and yet I cannot find it to uninstall - Spotlight yields no results at all, and I have removed it from login items under System Preferences / Accounts. I want to remove PeerGuardian completely to see if this resolves the kernel panic but don't see (a) how I can, given that I can't find it anywhere and/or (b) how it can be causing a kernel panic if I can't find it anywhere!Â
Info:
Intel iMac 20" 2.4ghz, Mac OS X (10.5.4)
iMac 2.16 GHZ IntelCore 2 Duo with 2GB RAM running OS 10.5.8. After switching from one user account to the Admin User Account the kernel panic message 'You need to restart you computer' appeared. After holding down the power button and restarting, I tried to login to the same account but got the same error message. Tried again and still same message. I then restarted using the install disk and used Disk Utility to repair the disk. Â
Disk Utility reported missing thread record, incorrect number of threads,invalid volume file count (It should be 823873 instead of 823874) incorrect number of extended attributres and missing directory record and then it continuted to repair the disk and then showed invalid volume file count error again but this time it displayed (It should be 823874 instead of 823873) For some reason the numbers were swapped round from the earlier message. It continued to repair and reported that the Volume Macintosh HD appears to be OK.Â
I restarted the mac and logged into Admin User Account and got the 'You need to restart your computer' message again. After restarting I logged into the other 3 user accounts and they all work perfectly but each time I log onto the Admin User Account the 'restart computer' message appears. Is there any way to repair the Admin User Account without having to re-format the hard drive and re-install everything from scratch?
Info:
iMac, Mac OS X (10.5.8)
My Canon photo printer does not recognize files on my desktop?
Canon has "never heard of this problem".
Info:iMac, Mac OS X (10.6.8)
Sounds like a desperate need for some Kentucky Fried Chicken while waiting for your 10.6 install.
View 2 Replies View RelatedI am just starting a new job and have been getting extreme speed issues on my computer followed by this recent kernel panic. I am running 4 2 TB G Speeds through eSATA. My computer went down, when I brought it back up Final Cut Pro took 5-10 minutes just to simply open. I wasn't even attempting to open a certain project. Any ideas based on the attached Kernel report? [code]
Info:
Mac Pro
I'm getting a kernel panic at start up and the optical drive wont read the start up DVD. I can boot up windows via bootcamp and the machine runs fine. I'm not getting any red LED's on my risers, so i'm assuming its not a RAM issue. I have a Mac Pro 8-core (2008) stock, just added 10 gigs of RAM.
View 1 Replies View RelatedFor the past few days (never happened before) my apps started crashing continuously and kernel panic screen started appearing very frequently. I am still wondering what may be the cause of it, then I tested my RAM with Rember, and this log showed up:
Memtest version 4.22 (64-bit)
Copyright (C) 2004 Charles Cazabon
Copyright (C) 2004-2008 Tony Scaminaci (Macintosh port)
Licensed under the GNU General Public License version 2 only
I know a lot of people dread this, let alone ask this. But how do you cause a voluntary kernel panic in 10.4?
View 8 Replies View RelatedI get kernel panics after a few min's of running the Mac pro. The ram are perfectly paired (2x 4gb in both slots, both in the first 2) and I get issues with it it seems. It started to happen as of today but didn't happen the days before. Nothing was changed in the configs or software.
View 3 Replies View RelatedI recently got a Dell 2209WA with built in USB hub. and great i thought, i can manage the USB ports on my macbook a bit more effectively. But it seems when i pull the USB cable when i want to go portable, it gets a KP, at the moment i suspect it has something to do with the logitech wireless adaptor i have plugged into the monitor. it exhibits these issues when the monitor is turned off as well.
I have another USB hub, but i pretty much use it exclusively for my external hard drives (i don't really like to keep it plugged in all the time, if powered up for some reason the drives spin up in the middle of the night even when the macbook is sleeping) and it does nothing like this when the adaptor is plugged into that.
I've had two of these in less than 24 hours on this new machine. I was able to work in Photoshop and Aperture fine, but the minute I started watching Hulu videos I started getting these. Oddly enough. I zapped PRAM and repaired permissions, and haven't had another one yet... but should I just take it back now while I'm still in my 14 days?
Here is the log:
Mac OS version: 9G3553
Kernel version:
Darwin Kernel Version 9.6.3: Tue Jan 20 18:26:40 PST 2009; root:xnu-1228.10.33~1/RELEASE_I386
System model name: MacPro4,1 (Mac-F221BEC8)
Happy for my macbook pro for almost two years. Lately it's been unstable and freezes sometimes. Two days ago it went to kernal panic and shows kernal panic screen and asks for restart everytime it restarts. It won't start on DVD or safe mode (it just hangs there and keeps spinning). For single user mode, it first worked and I was able to remove login items, but it froze again and now generates the following panic log. All the hardware have been the same and I have installed vpn a few months ago and dropbox last week.
Jettinsoning kernel linker.
Resetting IOCatalogue.
GFX0: family specific matching fails
Matching service count =1
Matching service count =2
Matching service count =2
Matching service count =2
Matching service count =2
Matching service count =2
May 3 11:51:15 localhost DirectoryService[20]: Launched version 5.6 (v514.24)
Previous shutdown Cause: 3
ath_attach: devid 0x24
yukon: Eithernet address xxxxxxx
Override HT40 Powers. EEPROM Version is 14.4. Device Type 5
NVDANV50HAL loaded and registered.
GFX0: family specific matching fails
GFX0: family specific matching fails
GFX0: family specific matching fails
Matching service count = 0
May 3 11:51:24 localhost configd[28]: Error: No interface name for AirPort_Athr5424ab
May 3 11:51:24 localhost configd[28]: Error: ioPublishedDriverCallback() failed to initDeviceFromService()
May 3 11:51:24 localhost mDNSResponder mDNSResponder-176.3 (Sep 30 2008 16:59:38)[48]: starting
AirPort_Athr5424ab: Ethernet address xxxxx
AirPort: Link down on en1
May 3 11:51:32 xxxcomputer fseventsd[72]: event logs in /.fseventsd out of sync with volume. destroying old logs. (13 218 724)
AirPort: Link up on en1
AppleYukon2: 000000.00000 sk98osx_dnet - recovering from missed interrupt
May 3 11:51:32 xxxcomputer fseventsd[72]: log dir: /.fseventsd getting new uuid: xxxxx
May 3 11:51:32 xxxcomputer ntpdate[88]: can't find host time.apple.com
May 3 11:51:32 xxxcomputer ntpdate[88]: no servers can be used, exiting
AppleYukon2: 0000,0000 sk98osx_dnet - recovering from missed interrupt
May 3 11:51:41 xxxcomputer /usr/sbin/ocspd[97]: starting
May 3 11:51:32 xxxcomputer /system/library/coreservers/loginwindow.app/contents/macos/loginwindow[68]: login window application started - threaded auth
ciscoVPN: attempting to attach to all available ethernet interfaces.
ciscoVPN: checking if we are already attached to interface: en1
ciscoVPN: no, not yet attached to interface: en1
ciscoVPN: interface: en1, filter attached.
ciscoVPN: current MTU for en1 is 1500, saving it.
panic(cpu 0 caller 0x001A9C68): Kernel trap at 0x0019ca06, type 14=page fault, registers:
CR0: 0x80010033, CR2: 0x00000000, CR3: 0x01b51000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x00000000, ECX: 0x0549c004, EDX: 0x00000000
CR2: 0x00000000, EBP: 0x36077b58, ESI: 0x00000000, EDI: 0x36077c3c
EFL: 0x00010246, EIP: 0x0019ca06, CS: 0x00000000, DS: 0x00000010
Error code: 0x00000000
Debugger called: <panic>
Backtrace (CPU 0), Frame: return address (4 potential args on stack)
I was updating my mothers ibook G4 and after the two restarts it gives me this. Is there any way to get past this she does not have a back up of her HD.
View 6 Replies View RelatedI'm trying to get OSX installed onto my new intel x25-m SSD, but it just won't happen. Trying to boot from my install DVD that came with my new Mac Pro throws up a kernel panic after about a minute or two of loading.
Trying to boot from my store-bought Leopard DVD does nothing. After restarting it just sits there and the DVD stops spinning after a couple minutes. Is there another way I can turn my new SSD into the boot drive? This is driving me nuts.
I'm new to mac so everything you say try to be as specific as possible.
i bought a used ibook g4 on ebay. i am pretty sure it is running OS X 10.1 if that matters but i'm not sure on that.
After messing around for a while i turn it off and back on a while later and when it was turning on it came to the gray screen and had a folder with a question mark then the little dude with the nice smilie face but an error comes up.