Mac Pro :: Two Kernel Panic On New Machine
Apr 11, 2009
I've had two of these in less than 24 hours on this new machine. I was able to work in Photoshop and Aperture fine, but the minute I started watching Hulu videos I started getting these. Oddly enough. I zapped PRAM and repaired permissions, and haven't had another one yet... but should I just take it back now while I'm still in my 14 days?
Here is the log:
Mac OS version: 9G3553
Kernel version:
Darwin Kernel Version 9.6.3: Tue Jan 20 18:26:40 PST 2009; root:xnu-1228.10.33~1/RELEASE_I386
System model name: MacPro4,1 (Mac-F221BEC8)
View 9 Replies
ADVERTISEMENT
Jun 1, 2008
Time Machine was doing its normal hourly backup when all of a sudden I got the multi-language gray shade of death. I restarted and tried to backup again, which resulted in another kernel panic. This time I tried entering Time Machine, and in the middle of "Connecting to Backup Volume," I get another kernel panic. This has never happened before I updated to 10.5.3, but I've had several backups since updating and this hasn't happened before just now, so I'm not sure it's a 10.5.3 issue.
[Log] ...
I have Time Machine pointed at a Time Capsule and I'm on the MacBook listed in my signature. I turned off Time Machine until I can figure this out.
View 10 Replies
View Related
Jul 29, 2008
I have a 2.8 Octo Mac Pro, Early 2008 with the ATI Radeon HD 2600 XT graphics, 6 GB Ram, 4 of which are from OWC. I have a Cintiq 20WSX hooked up to it doing animation with Adobe Flash CS3. Since I upgraded the software to 10.5.3, and now 10.5.4, I've been having some kernel panics. Some of the crashes where attributed to the Wacom Tablet Driver and I've been exchanging emails back and forth with Wacom Support and their latest release of the driver seems to solve some of the problems. Now, it's the intermittent kernel panics that's causing me issues. I would get the gray curtain of death every other day.
I have been doing some process of elimination by removing the Cintiq from the Mac Pro and hooking it up with my iMac. The Cintiq runs great on the iMac and I have yet to get a kernel panic. Which led me to suspect that maybe it's in the RAM of my Mac Pro that is causing the problem, or maybe something else I know not of. Other than the mouse, monitor and keyboard, I only have the Cintiq as the external peripheral hooked up to the Mac Pro when these kernel panics occur. Both Mac Pro and iMac are on 10.5.4. Both have Flash CS3 and the latest tablet driver installed.
Actually, other than Flash CS3 I do not have any other 3rd party up running on the Mac Pro. I've been running the Apple Hardware Test and have it on loop for 21 hours straight now, 14 passes so far. There's no report yet of anything. My question is, what should I do after should the Apple Hardware Test reveals nothing wrong? Is there any other way to find out what's been causing those intermittent kernel panics that I have been having with the MacPro and the Cintiq? Do I let it run (the Apple Hardware Test) a lot longer to see if anything will come up?
View 4 Replies
View Related
Nov 28, 2009
I just received a replacement computer for a defective machine. Its a brand new macbook pro. I transferred old files with time machine only to have the new machine resume a series of kernel panics that caused the replacement. The Genius Bar asked me to reload everything from scratch so as not to transfer corrupt files. I did so -- with the most up to date dmg files out there, and 4 days later had another kernel panic. I do not know what it means but have pasted it below.
View 11 Replies
View Related
May 29, 2012
Over the weekend I tried to backup my MacBook Pro onto an external harddrive, and when about 23Gb out of 110Gb were completed, my mac went into a kernel panic ("You need to restart your computer. hold down the power button until it turns off, then press the power button again." in four languages). Previous backups went fine. So I did a reformat of the ext. hdd, same thing: after about 20 or so Gb of backup, the msg. pops. otherwise the mac runs without problems. Did a virus check, which came up negative.
Here is the panic log:
Interval Since Last Panic Report: -6 sec
Panics Since Last Report: 1
Anonymous UUID: 7254B2B2-A9E2-40B3-9A00-06A141425C7F
Mon May 28 06:53:53 2012
panic(cpu 0 caller 0x2abf6a): Kernel trap at 0x00270ea8, type 14=page fault, registers: .....
Info:
MacBook Pro, Mac OS X (10.7.3)
View 2 Replies
View Related
Apr 5, 2012
I had the hard drive replaced in in my mid 2009 17" MacBook pro. After the clean install of lion I migrated my data from time machine (lion) to the new clean partition.. Upon completion the machine is unresponsive. The progress wheel turning for 10 minutes. I force quit and restart to kernel panic. I have been through this 3 times same sequence of events same results.
View 4 Replies
View Related
Aug 30, 2009
Sounds like a desperate need for some Kentucky Fried Chicken while waiting for your 10.6 install.
View 2 Replies
View Related
Jun 29, 2012
I am just starting a new job and have been getting extreme speed issues on my computer followed by this recent kernel panic. I am running 4 2 TB G Speeds through eSATA. My computer went down, when I brought it back up Final Cut Pro took 5-10 minutes just to simply open. I wasn't even attempting to open a certain project. Any ideas based on the attached Kernel report? [code]
Info:
Mac Pro
View 1 Replies
View Related
Nov 7, 2010
I'm getting a kernel panic at start up and the optical drive wont read the start up DVD. I can boot up windows via bootcamp and the machine runs fine. I'm not getting any red LED's on my risers, so i'm assuming its not a RAM issue. I have a Mac Pro 8-core (2008) stock, just added 10 gigs of RAM.
View 1 Replies
View Related
Nov 26, 2010
For the past few days (never happened before) my apps started crashing continuously and kernel panic screen started appearing very frequently. I am still wondering what may be the cause of it, then I tested my RAM with Rember, and this log showed up:
Memtest version 4.22 (64-bit)
Copyright (C) 2004 Charles Cazabon
Copyright (C) 2004-2008 Tony Scaminaci (Macintosh port)
Licensed under the GNU General Public License version 2 only
View 3 Replies
View Related
Jul 7, 2007
I know a lot of people dread this, let alone ask this. But how do you cause a voluntary kernel panic in 10.4?
View 8 Replies
View Related
Aug 8, 2008
I get kernel panics after a few min's of running the Mac pro. The ram are perfectly paired (2x 4gb in both slots, both in the first 2) and I get issues with it it seems. It started to happen as of today but didn't happen the days before. Nothing was changed in the configs or software.
View 3 Replies
View Related
Mar 18, 2009
I recently got a Dell 2209WA with built in USB hub. and great i thought, i can manage the USB ports on my macbook a bit more effectively. But it seems when i pull the USB cable when i want to go portable, it gets a KP, at the moment i suspect it has something to do with the logitech wireless adaptor i have plugged into the monitor. it exhibits these issues when the monitor is turned off as well.
I have another USB hub, but i pretty much use it exclusively for my external hard drives (i don't really like to keep it plugged in all the time, if powered up for some reason the drives spin up in the middle of the night even when the macbook is sleeping) and it does nothing like this when the adaptor is plugged into that.
View 2 Replies
View Related
May 3, 2009
Happy for my macbook pro for almost two years. Lately it's been unstable and freezes sometimes. Two days ago it went to kernal panic and shows kernal panic screen and asks for restart everytime it restarts. It won't start on DVD or safe mode (it just hangs there and keeps spinning). For single user mode, it first worked and I was able to remove login items, but it froze again and now generates the following panic log. All the hardware have been the same and I have installed vpn a few months ago and dropbox last week.
Jettinsoning kernel linker.
Resetting IOCatalogue.
GFX0: family specific matching fails
Matching service count =1
Matching service count =2
Matching service count =2
Matching service count =2
Matching service count =2
Matching service count =2
May 3 11:51:15 localhost DirectoryService[20]: Launched version 5.6 (v514.24)
Previous shutdown Cause: 3
ath_attach: devid 0x24
yukon: Eithernet address xxxxxxx
Override HT40 Powers. EEPROM Version is 14.4. Device Type 5
NVDANV50HAL loaded and registered.
GFX0: family specific matching fails
GFX0: family specific matching fails
GFX0: family specific matching fails
Matching service count = 0
May 3 11:51:24 localhost configd[28]: Error: No interface name for AirPort_Athr5424ab
May 3 11:51:24 localhost configd[28]: Error: ioPublishedDriverCallback() failed to initDeviceFromService()
May 3 11:51:24 localhost mDNSResponder mDNSResponder-176.3 (Sep 30 2008 16:59:38)[48]: starting
AirPort_Athr5424ab: Ethernet address xxxxx
AirPort: Link down on en1
May 3 11:51:32 xxxcomputer fseventsd[72]: event logs in /.fseventsd out of sync with volume. destroying old logs. (13 218 724)
AirPort: Link up on en1
AppleYukon2: 000000.00000 sk98osx_dnet - recovering from missed interrupt
May 3 11:51:32 xxxcomputer fseventsd[72]: log dir: /.fseventsd getting new uuid: xxxxx
May 3 11:51:32 xxxcomputer ntpdate[88]: can't find host time.apple.com
May 3 11:51:32 xxxcomputer ntpdate[88]: no servers can be used, exiting
AppleYukon2: 0000,0000 sk98osx_dnet - recovering from missed interrupt
May 3 11:51:41 xxxcomputer /usr/sbin/ocspd[97]: starting
May 3 11:51:32 xxxcomputer /system/library/coreservers/loginwindow.app/contents/macos/loginwindow[68]: login window application started - threaded auth
ciscoVPN: attempting to attach to all available ethernet interfaces.
ciscoVPN: checking if we are already attached to interface: en1
ciscoVPN: no, not yet attached to interface: en1
ciscoVPN: interface: en1, filter attached.
ciscoVPN: current MTU for en1 is 1500, saving it.
panic(cpu 0 caller 0x001A9C68): Kernel trap at 0x0019ca06, type 14=page fault, registers:
CR0: 0x80010033, CR2: 0x00000000, CR3: 0x01b51000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x00000000, ECX: 0x0549c004, EDX: 0x00000000
CR2: 0x00000000, EBP: 0x36077b58, ESI: 0x00000000, EDI: 0x36077c3c
EFL: 0x00010246, EIP: 0x0019ca06, CS: 0x00000000, DS: 0x00000010
Error code: 0x00000000
Debugger called: <panic>
Backtrace (CPU 0), Frame: return address (4 potential args on stack)
View 6 Replies
View Related
May 14, 2009
I was updating my mothers ibook G4 and after the two restarts it gives me this. Is there any way to get past this she does not have a back up of her HD.
View 6 Replies
View Related
Jul 21, 2009
I'm trying to get OSX installed onto my new intel x25-m SSD, but it just won't happen. Trying to boot from my install DVD that came with my new Mac Pro throws up a kernel panic after about a minute or two of loading.
Trying to boot from my store-bought Leopard DVD does nothing. After restarting it just sits there and the DVD stops spinning after a couple minutes. Is there another way I can turn my new SSD into the boot drive? This is driving me nuts.
View 19 Replies
View Related
Jul 26, 2009
I'm new to mac so everything you say try to be as specific as possible.
i bought a used ibook g4 on ebay. i am pretty sure it is running OS X 10.1 if that matters but i'm not sure on that.
After messing around for a while i turn it off and back on a while later and when it was turning on it came to the gray screen and had a folder with a question mark then the little dude with the nice smilie face but an error comes up.
View 3 Replies
View Related
Aug 15, 2009
My wife was attempting to load the most recent updates onto her MB, the update failed (not sure exactly which one) and now OSX won't load. She gets a "Version mis-match between Kernel and CPU PM" panic and it won't go any farther - neither in safe mode nor single user mode. I booted off of my computer's recovery disc (I haven't found hers yet - we recently moved) and used Disk Utility to repair the disk and the disk permissions, but it still won't load.
View 6 Replies
View Related
Oct 11, 2009
i go the following kernel panic. it would be great if you could me identify why i am gettin these panic.I have the mid 2007 white macbook
View 15 Replies
View Related
Nov 29, 2009
I did a quick search through the forum and didn't see anything specific about this problem. It just started to occur yesterday and nothing has changed on the computer. (Nothing new installed and no external hardware plugged in.)
Basically, it just pops up with the grey screen advising to restart. Sometimes it occurs after waking from sleep, sometimes it occurs after starting up, and sometimes it occurs in the middle of a task. I haven't noticed a specific pattern.
I ran the AHT and everything passed. I also ran Rember and the memory seemed fine in the test. I reset the PRAM and VRAM and the SMC after speaking with Apple. Finally, I reinstalled the OSX clean on the machine and the panics are still occurring.
This is the last panic report from the Macbook 1,1 2.0 with 1.25 GB RAM. I'm hoping it is the RAM and not something with the logic board, but am not sure if that can be ascertained without finding replacement RAM first.
View 2 Replies
View Related
Dec 5, 2009
Mac G5 ppc OSX10.4.11
Starting up from any boot disk will give me a kernel panic forcing me to hard restart.
Background:
After many freezes I ran disk utility and I get:
Checking Catalog file.
Invalid index key
The volume Macintosh HD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
So I use my wife's Imac startup disk to boot it in order to repair but I get the dreadfull death screen (I know how to press the C)
I'm thinking maybe it's because her disk if for her Intel proc so I go and buy a copy of disk warrior 4, and same problem.
View 1 Replies
View Related
Jan 3, 2010
I tried to play world of warcraft so after going through all possible trouble shooting steps such as disc repair, reset pram and everything else I did an archive and reinstalled my OS. At first this seemed to work but then I could not even open safari with out the computer locking up So I erased everything and did a fresh install, the installation had no problems I did a disk check and everything before installing everything was good.Then I get to the welcome animation screen and on the first word the computer locked up at the graphics and the only way to get it off was to hold the power button and restart. Now I am stuck in a kernel panic and can not do anything. The only thing it will allow me to do is get into single user mode, I can not even boot to the CD or disk utility it just keeps giving me the kernel panic when i try and hold shift, c, or d while booting up.
View 1 Replies
View Related
Feb 13, 2010
I'm getting this Kernel Panic randomly. What might be causing it?
View 6 Replies
View Related
Apr 28, 2012
I get kernel paic upon boot. I did that hard drive cleanup and reinstalled Lion. What about memory? I need to upgrade my memory? I have 8 G of upgraded RAM. (20 inch iMac core 2 duo)
Info:
iMac, Mac OS X (10.7.3)
View 4 Replies
View Related
May 22, 2012
My computer had problems with display, track pad, not powering up, and lots of parts were replaced in January (MacBook Pro purchased 12.31.09). Got it home, after a while constant kernal panics. tried everything, brought it into Apple store yesterday, ran diagnostics, hard disk repaired, seemed OK.Â
Shortly after I came home it happened again. I repaired permissions, did verify disk, no problems with disk. Updated software, including went to Java and Adobe and updated them. Nothing works. Now the permissions note lots of problems with Remote Management (one of the updates from yesterday, 5.21) and Java (yesterday too). MacBook Pro OS X 10.6.8, would like to go to Lion but don't want to until my machine is stable?
Info:
MacBook Pro (13-inch Mid 2009), Mac OS X (10.6.8)
View 2 Replies
View Related
Aug 10, 2010
My Mac Pro (late 2006) now has kernel panics at startup. Problem first happened while computer was in sleep mode, a second kernel panic happened about 10-15 minutes after reboot the first time. Now it happens at startup every time. Zapped PRAM multiple times to no effect. Tested original 10.4 install disk, as well as 10.5 and 10.6 upgrade disks with all external connections removed and from a cold boot. The 10.4 disk causes the kernel panic every time. The 10.5 and 10.6 disks do too, if the C or D key is depressed. The upgrade disks will hang in a gray screen (10.6) or pale blue screen (10.5) with no keys depressed--computer keeps running but fails to boot. Also tested the RAM (4 X 512 MB) in different combinations of one pair in the top riser board (and switched risers, and removed lower board completely). All resulted in kernel panics. Next option?
View 10 Replies
View Related
May 23, 2008
I recently decieded to step into the adventure that is world of warcraft, and I have experienced kernel panics once every two hours or so of playing. I wonder if my ram is sliding out of place, or i should reinstall w.o.w. If it helps any, when I restart my macbook, it tells me a bunch of seemingly random coding as well as mentioning world of warcraft.
View 15 Replies
View Related
Nov 10, 2008
Since yesterday I have not been able to boot normally into Leopard. I had just switched of my ADSL modem and the computer froze after that it never boots in normal mode. I am in safe mode, the audio does not work in safe mode, everything is working. I am attaching the crash report in text format. I did try to boot after removing all the peripherals, also tried to reinstall but the computer does not accept the install disk , just ejects them. I am in real trouble now, suggestions are welcome. I am using a PowerPC machine specs PowerMac G5 1.6ghz with 1.25 GB RAM running OS X 10.5.5
View 5 Replies
View Related
Nov 11, 2008
I'm trying to fix my iMac. I am getting a kernel panic from start up! I've tried troubleshooting from the apple website. I've tried holding C. I only have two disk. Mac OS S install disc 1 & 2. I've tried holding Control, Option, R, and P.
View 5 Replies
View Related
Nov 26, 2008
I recently upgraded to OS 10.5 on two desktops. The PowerMac Intel works fine. The G5 Quad seems to be having weekly kernel panics and frequent software crashes (an example yesterday: Word and Safari were open. After a few minutes of no keyboard input whilst reading a webpage, Word crashed, followed by Safari). Running Maya seems to cause the kernel panics. It did so, once in a while, on OX 10.4, but with 10.5 it's become a frequent occurrence. Calling Apple (still on Applecare) doesn't help. They run some diagnostics and can't pinpoint anything. Clearly if they don't recognize the problem, they can't fix it. (I also run Maya on the PowerMac Intel with no problems, so Maya isn't the problem.)
Realplayer, streaming, has been playing during some of these occurrences — is this a known culprit? Any suggestions? Was the G5 Quad just a bad model? Can I turn off whatever causes the kernel panic alerts that freeze my computer? Should I be demanding more out of Applecare — is there anything I should expect them to replace? Should I downgrade to OS 10.4? If so, how do I do this? Many questions I know...
View 3 Replies
View Related
