Intel Mac :: Keeps Booting In Safe Mode Plus Kernel Panic?
Apr 17, 2012
a bit complicated.  I have a 3 year old iMac, Snow Leopard 10.5.2 on the dics, but I updated it so..a pretty receent version of Snow Leopard. I had had kernel panics before- it turned out to be a bad RAM chip, replaced it and it fixed the problem.Â
This time, I was hoping it was the same. I got a new RAM chip, swapped them out and ID'ed the bad one. Reseated the RAM. Probelm is, when I was trying to fix the problem, I had booted in Safe Mode. Now the iMac starts up normally- the chime, the Apple- AND the Safe Mode bar.
Which progresses for about 5 seconds before another Kernel panic descends. This happens whether the keyboard is connected or not. At this point the Safe Mode at startup bugs me more than the kernel panics! Sigh.Â
I wonder if there's any key combo on startup I could try to at least get out of Safe Mode before Kernel panic sets in. When my laptop has a kernel panic i can usually repair with Disk repair on CD.  I realize this sounds hopeless! And i need it repaired, but money is an issue.
View 1 Replies
ADVERTISEMENT
Nov 10, 2010
my name is SPC Sanders. I am a forward observer currently deployed to Afghanistan. I've owned a Macbook Pro for a couple of years.
About three weeks ago, I made the stupid mistake of attempting to run iOSX so I could dual boot with Windows 7 (all stuff I acquired while I was home on midtour leave.) The install seemed to be ok, however, I noticed immediately I could not make any changes to settings as my administrator password was no longer working. (Administrator is my only account on this laptop.)
At fear of losing my operability, I simply did not power down for that whole time. However, I recently moved bases, and alas, the time came to power down.
Upon bootup, I get a constant spinning wheel. I left this on for a couple of hours just to be sure, then realized it was a lost cause. I tried booting in safe mode, and I got some kernel panic. It says a bunch of stuff about debugger calling the panic, bla bla bla, but the thing that caught my eze was Mac OS version not set yet.
After booting in safe mode, getting that error, and powering off, my laptop will boot into a grezish blueish lightblueish (alternating) type of screen, which sometimes has the spinning wheel, sometimes not. Again, nothing.
I understand I will probably need my OS disc to fix this, but I didn't bring it with me. Am I SOL?
View 7 Replies
View Related
Sep 3, 2014
My iMac24" can't booting in normal mode, but booing in safe mode only.
how to boot up in normal mode. If I restart the system, it is showing the apple logo and not going to Finder.
Info:
iMac, maverics
View 2 Replies
View Related
Jul 6, 2010
I have a 15" mbp with 10.6 Intel core duo, 4gb ram with a boot camp and ubuntu partition through parallels. The other day I was installing xcode from apple's website, which failed 3 times after downloading saying the package couldn't be expanded. I left my computer for a while and came back where i then had to log in again. it rejected my password numerous time (i'm positive it was correct). when i restarted my computer i got a kernal panic screen when the apple logo came up. it told me to restart the computer which i did. didn't work. i restarted with the osx cd to use the disk utility. when it checked the drive it found a bunch of errors, which i then tried to correct. it went for a couple minutes then told me they couldn't be fixed and i should try to back up my data and reinstall osx. i don't know how to back up my hard drive when i can't log into my account. i've tried to boot in target disk mode and copy some files that way, but the only disk the other computer sees is my windows partition- no mac partition.
i've also tried these, none of these have worked: restarting in safe mode resetting the ram and pram booting with different sticks of ram all result in a kernal panic.
my windows partition still works fine though (as much as i hate to say it) the only things I really care about on my computer are my files from school and my itunes library. is there any way i can get these files off my computer?
View 2 Replies
View Related
Dec 5, 2009
Mac G5 ppc OSX10.4.11
Starting up from any boot disk will give me a kernel panic forcing me to hard restart.
Background:
After many freezes I ran disk utility and I get:
Checking Catalog file.
Invalid index key
The volume Macintosh HD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
So I use my wife's Imac startup disk to boot it in order to repair but I get the dreadfull death screen (I know how to press the C)
I'm thinking maybe it's because her disk if for her Intel proc so I go and buy a copy of disk warrior 4, and same problem.
View 1 Replies
View Related
Aug 21, 2009
I'm having a weird problem with a 15" I bought in February (2009). I can boot up fine into the OS without any problems. But when I try to boot from the reinstallation CD to do a clean install, I keep getting a kernel panic. (And yes, I do need to do a clean install.)
View 2 Replies
View Related
Sep 10, 2009
I've just had two kernal panics. The second time it was during start up. Now it won't start up at all. Gets to the White screen and tells me to restart. I bought this 8 months ago and have had nothing but trouble.
View 10 Replies
View Related
Nov 20, 2010
I'm getting a kernel panic at start up and my mac wont boot up. I don't think its the RAM because the LED's are not red on the risers. When I start up holding "option" and select to boot up from the DVD it goes to the apple logo and on to the kernel panic. When I start up windows via bootcamp everything works fine. I've fsck. resetting PRAM, NVRam, nothing seems to work.
View 1 Replies
View Related
Nov 2, 2010
Yesterday I purchased a INtel X25-V SATA SSD and installed it in my 13 inch MacBook Pro. Upon booting to a CD so I could install OS X 10.6 on the new drive, I received a kernel panic. After numerous tries I then put the old hard drive in (now clear of any data) and tried to boot to a CD again. Same problem. Now I seem to be stuck with a computer that will not boot to the CD no matter which hard drive is installed. I am able to use the SSD/HD in target disk mode. I can even install OS X to it from a different computer, but then when I try to boot on the MacBook Pro itself, I receive the kernel panic. The kernel panic seems to occur regularly after the Mac tries to load the CD for a minute or two.
View 4 Replies
View Related
Sep 27, 2009
Today I was preparing to get rid of my bootcamp'd windows7, change the partition size, and install XP. Well, I decided instead that I would just get a fresh OS X install, and install XP through the new bootcamp. So, I popped in my XP disc and went through the partition manager that comes with it (I don't know how to do it through mac) deleted all my partitions and installed windows so I could operate the cd-drive, and put in my OSX install disc.
(Perhaps I should mention I formatted it all to NTFS, thinking I could just reformat the whole thing with the OS X install like you can with windows). So, now I have a full NTFS partition, XP works fine. I can put in my OS X cd, restart and attempt to boot from a cd either from holding down option, or c at boot. When I try to do this, it pops up the kernel panic power icon, and gives me the "restart your computer" message. In recap my computer kernel panics on boot from cd.
Here's the question: Is this a true kernel panic, or is it due to the fact I don't have a partition available for mac to boot from? I didn't change any hardware, it was working perfectly fine prior to the -attempted- reinstall, and my XP install is working fine (minus the drivers), and after some research kernel panics tend to happen after hardware failures, in fact I had one happen a few months ago when my video card bit the dust.
View 6 Replies
View Related
Aug 11, 2010
my used eMac 1.42 ghz with 2gb ram, tiger 10.4.11 began to freeze a few months ago so I cleared the hard drive and reinstalled = worked ok for a while. Now, it is regularly freezing and even locking up when it has been running for a while - when it heats up. Until it cools off a while, on restart or after shutdown, it will hang at the grey screen or display a flashing folder with an alternating finder icon and a question mark - I assume it can't find the OS. After rebooting, I got the report function with this info
View 1 Replies
View Related
Sep 8, 2007
I'm relatively new to Macs and I wanted to try a clean install (or erase and install) on my ibook. I recently purchased a MBP and since Leopard is on the horizon, I wanted to do a "trial run" of installing an updated operating system. I know that you can just hit update instead of doing a clean install, but I've been reading that things run better when you do a fresh install. My old ibook still has Panther on it and I figured I could try to install Tiger on it from my MBP disks.
I know that this represents a violation of the license, but I thought it would be worth it to ensure that I don't make any major mistakes when I'm doing the same procedure with my brand new MBP when Leopard gets released. When I tried booting from the disk from my ibook I got a kernel panic which I interpreted as a sign that it was not a good idea so I abandoned the project. Now every time I try to start my ibook I get another kernel panic and I'm afraid I just broke my old computer.
View 5 Replies
View Related
Mar 18, 2012
I have a Macbook Pro 17" (Model A1229). Since some days I am unable to boot into OS X. Regardless if I boot from internal hard drive, external USB drive, Mac OSX Install DVD or an Install Image of OS X on a USB Stick. Every time I boot OS X I get a kernel panic after some seconds. Sometimes the grey spinner (below the apple during boot) just stops spinning (no kernel panic then).
In the beginning I was sometimes able to boot into OS X but it only lasts a few minutes or seconds and then freezes or I was getting a kernel panic. Now I always get the freeze or kernel panic during boot up. As it also happens when booting from external sources it can not be the internal hard drive (also already changed that drive). So I thought it must be the logic board or something but I can run windows 7 on the machine without any problem! I already tried SMC and PRAM reset...
Info:
MacBook Pro 17" (intel), Mac OS X (10.5.1), - iPhone - Mac Mini (intel) - Time Capsule
View 4 Replies
View Related
May 29, 2012
How to do a safe reboot on my MacBook Pro when kernel panic message appears?
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3)
View 3 Replies
View Related
Jun 22, 2010
I was getting a error code 36 on my mac so I decided to try to boot up in safe mode now my macbook pro will not stop trying to boot to safe mode. I am on snow leopard.
View 2 Replies
View Related
Feb 7, 2009
I was following the directions from the iphone dev team's blog on how to fix the DFU mode in 10.5.6 by dl'ing from Apple and installing the "IOUSBFamily-315.4-log.dmg" for Mac OS X 10.5.5 Build 9F33. After I installed it and restarted as the directions stated, the machine started to reboot and then had kernel panic on start up. Now I can't get back the start up screen. I've tried disk utility and repairing permissions but it hasn't helped. What I can do other than archiving and installing?
View 2 Replies
View Related
Apr 3, 2009
I called applecare today, they weren't any help they told me to reinstall OS X, so I am downloading the updates I need and it tells me to restart my computer, during the installation process the god dam computer freezes, I wait and wait, finally I decide to shut it off, now it keeps going to some kernel panic mode, wtf should I do, I demand a replacement, I've had problems since I got this computer, two logic board replacements, now this?
View 11 Replies
View Related
Feb 25, 2010
I cant get it to work, I still have to hold down "6" and "4" to boot into 64 bit mode. I edited and verified the changes in my com.apple.boot as described here but it still boots into 32 bit mode.
View 4 Replies
View Related
Nov 5, 2010
Major issues here please I can use all the help I can get. My MacBook Pro 13" Unibody Aluminum is booting in safe mode everytime. I restate. Someone has advised my shift key could be stuck? How the he'll could that have happened? It's only a few months old, I just upgraded hard drie. My trackpad was running funky before that. My keyboard was acting wired, only symbols showed up.
View 2 Replies
View Related
Jun 2, 2014
My mac was being very, very slow so I turned it off, then as it it was booting it was taking ages so i restared in safe mode. While booting in safe mode the black bar at the bottom goes around 2/5 of the way across and then my macbook just switches off.Ive tried:fsckdisk utility repair/verifyreinstalling OS X LionÂ
When i tried to repair, it said i needed to erase everything and reinstall the OS. Last night when i tried to it said both drives are locked so i couldnt. And now when i just tried again, neither drivers are appearing; the box is just blank.Â
Let alone my livelyhood on the laptop, i have thousands and thousands pictures which if lost, would genuinley heartbreak me. I have much valuable data on my laptop and i really dont want to erase all data, because me being the gigantic fool that i am, i only have one time machine back up from about a year and a half ago. Â
Info:
MacBook Pro
View 2 Replies
View Related
Nov 12, 2010
I have a feeling I need a new motherboard to replace my graphics chip. I was playing World of Warcraft last night when the entire computer froze and a pink grid came over the computer. Could not force quit. About 10 seconds later, Kernel Panic screen and I have to hard reboot. Every time I reboot the pink grid is still there and it kernel panics, does not get past the spinning Apple logo. I was able to hold down shift and get it to safe mode, and was able to back up my files that way. I also ran the Apple hardware test, but it said no problems found. I am typing to you now in safe mode on this pink screen.
View 1 Replies
View Related
Sep 8, 2014
My iMac will not boot normally only in safe mode and then all programes keep flashing.Safari and mail continuously flashing grey lines..Reset the PRAM and it worked but turned the computer off and on again and its gone back to same problem...It's an iMac 27" late 2013 3.2 ghz
Info:
iMac (27-inch, Late 2013), OS X Mavericks (10.9.4)
View 1 Replies
View Related
Jun 29, 2009
I recently purchased a sort of beat up 1.5GHz 12" PowerBook G4, top of the line, and it arrived today. It boots up normally when the apple appears, then it shows the blue screen and then the mouse turns into a spinning wheel. Also, when I move the cursor, a second cursor from the same spot stays in the top-left corner. The PowerBook will only work normally as a headless server (powers on, lid closed), unless booted in safe mode. Another issue is the screen. The seller said there were lines going up and down the screen, but it varies depending on what is displayed on the screen. If the screen is grey or in target-disk mode, they do not appear, but on the 10.5 standard desktop pic, it changes pattern. The lines can be seen here: [URL]
View 1 Replies
View Related
Feb 10, 2012
Is there a way that I can understand what is causing frequent Kernel Panic crashes on my new iMac?Â
Fri Feb 10 18:01:00 2012panic(cpu 2 caller 0xffffff80002c266d): Kernel trap at 0xffffff800024421e, type 14=page fault, registers:CR0: 0x000000008001003b, CR2: 0xffffff0830070a80, CR3: 0x000000002bd65011, CR4: 0x00000000000606e0RAX: 0xffffff801dd30e80, RBX: 0xffffff8005280c20, RCX: 0x0000000009000000, RDX: 0xffffff8005280c30RSP: 0xffffff8161e32f90, RBP:
[code]....
View 14 Replies
View Related
Mar 26, 2012
How to manage a Kernel panic?
Info:
iMac
View 7 Replies
View Related
Feb 10, 2012
Off-late almost everytime I am getting kernal panics when I shut down my iMac 21 2011 model. After booting back here is the problem report that comes up. I could'nt make head or tail of it, could anybody help me out here. Â
Interval Since Last Panic Report: 591345 sec
Panics Since Last Report: 9
Anonymous UUID: 3C133529-E586-47C7-8799-ACB548B7537AÂ Â
Sat Feb 11 11:11:39 2012
panic(cpu 1 caller 0xffffff80002c266d): Kernel trap at 0xffffff7f820f0ff8, type 14=page fault, registers:
[code]...
Info:
iMac, Mac OS X (10.7.1)
View 3 Replies
View Related
Apr 23, 2012
Ever since I've got this iMac on the office, I've got the occasional kernel panics. At first they seemed to redeem themselfs during runtime, but for a while now, they seem to pop up at boot. And I mean, even not getting the Apple logo and it already freezes. I seem to be having this problem only in a frequency of say... once in two months or so? Â
Today I got it again and it even occured two times in a row, third time the system booted up. I would like to know whats up, I figure this must be a hardware issue since the system doesn't even load up. I'm a bit worried about sending this machine for it's warranty, since I won't have a machine for like 3 weeks until it gets back...
Here's the kernel panic:Â Â
Interval Since Last Panic Report:Â 274968 sec
Panics Since Last Report:Â Â Â Â Â Â Â Â Â 2
Anonymous UUID:Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 26D2C9E5-2CDA-4386-AEEC-A21012A8C927Â Â
Tue Apr 24 08:06:35 2012
[code].....
Info:
iMac (27-inch Mid 2010), Mac OS X (10.7.3)
View 1 Replies
View Related
May 24, 2012
Last night I was in the middle of downloading a file and had a kernal panic (crash report below).When I now log in I either immediately get a black screen ( but can see white spots which are the corners of windows opened) or sometimes I get to my desktop but after a few minutes the screen windows deteriate (repeatative ghosting like an old 80'spop video!) which then become unresponsive. I'm figuring it's had it's day now and hope to get a new iMac tonight. I would like to migrate everything but am unsure whether this is a hard drive failure ( in which case the migration is probably out of the window) or something else?Â
Interval Since Last Panic Report: 2699211 sec
Panics Since Last Report: 4
Anonymous UUID: 3489AC4E-2DC6-4498-AF01-5828C8995EB4
[code].....
View 6 Replies
View Related
Sep 2, 2014
My iMac keeps restarting with a kernel problem error message. A while ago I had the same problem soIÂ reinstalled Mavericks and all was fine for a while now the problem has returned. Why did it start in the first place and more importantly can I stop it?...it just restarted again as I'm writing this.
Info:
iMac, OS X Mavericks (10.9.4)
View 4 Replies
View Related
Sep 7, 2010
I have a BIG problem with my old powerbook. I have decided to format it.
It came with tiger, I had installed leopard with an upgrade DVD (not full version).
What I did: I inserted the leopard upgrade dvd and told the pb to initialize and install. After a while I had an error message. It already deleted everything, so when I insert the leopard dvd, it doesn't find any other OS, therefore I can't install the upgrade.
NO PROBLEM, I have the 2 tiger DVD. I insert the first one, pressing C, no. It does not start.
NO PROBLEM, I connect via firewire the powerbook to a macpro. I open the cd 1 of tiger (in the macpro) go to the installation file, and start the installation via firewire. It tells me that I have to partion the disk in Mac os extended with an option "GUI" (something like that).
I have noticed that the GUI mode is for an intel based mac, but mine is ppc...but if I select any other option the system doesn't allow me to continue with the installation of OSX]
I did it, and the installation proceeded well. After a while It asked me for CD2, I inserted it and finished the installation succesfully.
Now I started my powerbook...and is not working, again Kernel Panic...but now there is the OS installed, so...why?
View 12 Replies
View Related
