I get kernel panics after a few min's of running the Mac pro. The ram are perfectly paired (2x 4gb in both slots, both in the first 2) and I get issues with it it seems. It started to happen as of today but didn't happen the days before. Nothing was changed in the configs or software.
View 3 RepliesSounds like a desperate need for some Kentucky Fried Chicken while waiting for your 10.6 install.
View 2 Replies View RelatedI am just starting a new job and have been getting extreme speed issues on my computer followed by this recent kernel panic. I am running 4 2 TB G Speeds through eSATA. My computer went down, when I brought it back up Final Cut Pro took 5-10 minutes just to simply open. I wasn't even attempting to open a certain project. Any ideas based on the attached Kernel report? [code]
Info:
Mac Pro
I'm getting a kernel panic at start up and the optical drive wont read the start up DVD. I can boot up windows via bootcamp and the machine runs fine. I'm not getting any red LED's on my risers, so i'm assuming its not a RAM issue. I have a Mac Pro 8-core (2008) stock, just added 10 gigs of RAM.
View 1 Replies View RelatedFor the past few days (never happened before) my apps started crashing continuously and kernel panic screen started appearing very frequently. I am still wondering what may be the cause of it, then I tested my RAM with Rember, and this log showed up:
Memtest version 4.22 (64-bit)
Copyright (C) 2004 Charles Cazabon
Copyright (C) 2004-2008 Tony Scaminaci (Macintosh port)
Licensed under the GNU General Public License version 2 only
I know a lot of people dread this, let alone ask this. But how do you cause a voluntary kernel panic in 10.4?
View 8 Replies View RelatedI recently got a Dell 2209WA with built in USB hub. and great i thought, i can manage the USB ports on my macbook a bit more effectively. But it seems when i pull the USB cable when i want to go portable, it gets a KP, at the moment i suspect it has something to do with the logitech wireless adaptor i have plugged into the monitor. it exhibits these issues when the monitor is turned off as well.
I have another USB hub, but i pretty much use it exclusively for my external hard drives (i don't really like to keep it plugged in all the time, if powered up for some reason the drives spin up in the middle of the night even when the macbook is sleeping) and it does nothing like this when the adaptor is plugged into that.
I've had two of these in less than 24 hours on this new machine. I was able to work in Photoshop and Aperture fine, but the minute I started watching Hulu videos I started getting these. Oddly enough. I zapped PRAM and repaired permissions, and haven't had another one yet... but should I just take it back now while I'm still in my 14 days?
Here is the log:
Mac OS version: 9G3553
Kernel version:
Darwin Kernel Version 9.6.3: Tue Jan 20 18:26:40 PST 2009; root:xnu-1228.10.33~1/RELEASE_I386
System model name: MacPro4,1 (Mac-F221BEC8)
Happy for my macbook pro for almost two years. Lately it's been unstable and freezes sometimes. Two days ago it went to kernal panic and shows kernal panic screen and asks for restart everytime it restarts. It won't start on DVD or safe mode (it just hangs there and keeps spinning). For single user mode, it first worked and I was able to remove login items, but it froze again and now generates the following panic log. All the hardware have been the same and I have installed vpn a few months ago and dropbox last week.
Jettinsoning kernel linker.
Resetting IOCatalogue.
GFX0: family specific matching fails
Matching service count =1
Matching service count =2
Matching service count =2
Matching service count =2
Matching service count =2
Matching service count =2
May 3 11:51:15 localhost DirectoryService[20]: Launched version 5.6 (v514.24)
Previous shutdown Cause: 3
ath_attach: devid 0x24
yukon: Eithernet address xxxxxxx
Override HT40 Powers. EEPROM Version is 14.4. Device Type 5
NVDANV50HAL loaded and registered.
GFX0: family specific matching fails
GFX0: family specific matching fails
GFX0: family specific matching fails
Matching service count = 0
May 3 11:51:24 localhost configd[28]: Error: No interface name for AirPort_Athr5424ab
May 3 11:51:24 localhost configd[28]: Error: ioPublishedDriverCallback() failed to initDeviceFromService()
May 3 11:51:24 localhost mDNSResponder mDNSResponder-176.3 (Sep 30 2008 16:59:38)[48]: starting
AirPort_Athr5424ab: Ethernet address xxxxx
AirPort: Link down on en1
May 3 11:51:32 xxxcomputer fseventsd[72]: event logs in /.fseventsd out of sync with volume. destroying old logs. (13 218 724)
AirPort: Link up on en1
AppleYukon2: 000000.00000 sk98osx_dnet - recovering from missed interrupt
May 3 11:51:32 xxxcomputer fseventsd[72]: log dir: /.fseventsd getting new uuid: xxxxx
May 3 11:51:32 xxxcomputer ntpdate[88]: can't find host time.apple.com
May 3 11:51:32 xxxcomputer ntpdate[88]: no servers can be used, exiting
AppleYukon2: 0000,0000 sk98osx_dnet - recovering from missed interrupt
May 3 11:51:41 xxxcomputer /usr/sbin/ocspd[97]: starting
May 3 11:51:32 xxxcomputer /system/library/coreservers/loginwindow.app/contents/macos/loginwindow[68]: login window application started - threaded auth
ciscoVPN: attempting to attach to all available ethernet interfaces.
ciscoVPN: checking if we are already attached to interface: en1
ciscoVPN: no, not yet attached to interface: en1
ciscoVPN: interface: en1, filter attached.
ciscoVPN: current MTU for en1 is 1500, saving it.
panic(cpu 0 caller 0x001A9C68): Kernel trap at 0x0019ca06, type 14=page fault, registers:
CR0: 0x80010033, CR2: 0x00000000, CR3: 0x01b51000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x00000000, ECX: 0x0549c004, EDX: 0x00000000
CR2: 0x00000000, EBP: 0x36077b58, ESI: 0x00000000, EDI: 0x36077c3c
EFL: 0x00010246, EIP: 0x0019ca06, CS: 0x00000000, DS: 0x00000010
Error code: 0x00000000
Debugger called: <panic>
Backtrace (CPU 0), Frame: return address (4 potential args on stack)
I was updating my mothers ibook G4 and after the two restarts it gives me this. Is there any way to get past this she does not have a back up of her HD.
View 6 Replies View RelatedI'm trying to get OSX installed onto my new intel x25-m SSD, but it just won't happen. Trying to boot from my install DVD that came with my new Mac Pro throws up a kernel panic after about a minute or two of loading.
Trying to boot from my store-bought Leopard DVD does nothing. After restarting it just sits there and the DVD stops spinning after a couple minutes. Is there another way I can turn my new SSD into the boot drive? This is driving me nuts.
I'm new to mac so everything you say try to be as specific as possible.
i bought a used ibook g4 on ebay. i am pretty sure it is running OS X 10.1 if that matters but i'm not sure on that.
After messing around for a while i turn it off and back on a while later and when it was turning on it came to the gray screen and had a folder with a question mark then the little dude with the nice smilie face but an error comes up.
My wife was attempting to load the most recent updates onto her MB, the update failed (not sure exactly which one) and now OSX won't load. She gets a "Version mis-match between Kernel and CPU PM" panic and it won't go any farther - neither in safe mode nor single user mode. I booted off of my computer's recovery disc (I haven't found hers yet - we recently moved) and used Disk Utility to repair the disk and the disk permissions, but it still won't load.
View 6 Replies View Relatedi go the following kernel panic. it would be great if you could me identify why i am gettin these panic.I have the mid 2007 white macbook
View 15 Replies View RelatedI did a quick search through the forum and didn't see anything specific about this problem. It just started to occur yesterday and nothing has changed on the computer. (Nothing new installed and no external hardware plugged in.)
Basically, it just pops up with the grey screen advising to restart. Sometimes it occurs after waking from sleep, sometimes it occurs after starting up, and sometimes it occurs in the middle of a task. I haven't noticed a specific pattern.
I ran the AHT and everything passed. I also ran Rember and the memory seemed fine in the test. I reset the PRAM and VRAM and the SMC after speaking with Apple. Finally, I reinstalled the OSX clean on the machine and the panics are still occurring.
This is the last panic report from the Macbook 1,1 2.0 with 1.25 GB RAM. I'm hoping it is the RAM and not something with the logic board, but am not sure if that can be ascertained without finding replacement RAM first.
Mac G5 ppc OSX10.4.11
Starting up from any boot disk will give me a kernel panic forcing me to hard restart.
Background:
After many freezes I ran disk utility and I get:
Checking Catalog file.
Invalid index key
The volume Macintosh HD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
So I use my wife's Imac startup disk to boot it in order to repair but I get the dreadfull death screen (I know how to press the C)
I'm thinking maybe it's because her disk if for her Intel proc so I go and buy a copy of disk warrior 4, and same problem.
I tried to play world of warcraft so after going through all possible trouble shooting steps such as disc repair, reset pram and everything else I did an archive and reinstalled my OS. At first this seemed to work but then I could not even open safari with out the computer locking up So I erased everything and did a fresh install, the installation had no problems I did a disk check and everything before installing everything was good.Then I get to the welcome animation screen and on the first word the computer locked up at the graphics and the only way to get it off was to hold the power button and restart. Now I am stuck in a kernel panic and can not do anything. The only thing it will allow me to do is get into single user mode, I can not even boot to the CD or disk utility it just keeps giving me the kernel panic when i try and hold shift, c, or d while booting up.
View 1 Replies View RelatedI'm getting this Kernel Panic randomly. What might be causing it?
View 6 Replies View RelatedI get kernel paic upon boot. I did that hard drive cleanup and reinstalled Lion. What about memory? I need to upgrade my memory? I have 8 G of upgraded RAM. (20 inch iMac core 2 duo)
Info:
iMac, Mac OS X (10.7.3)
My computer had problems with display, track pad, not powering up, and lots of parts were replaced in January (MacBook Pro purchased 12.31.09). Got it home, after a while constant kernal panics. tried everything, brought it into Apple store yesterday, ran diagnostics, hard disk repaired, seemed OK.
Shortly after I came home it happened again. I repaired permissions, did verify disk, no problems with disk. Updated software, including went to Java and Adobe and updated them. Nothing works. Now the permissions note lots of problems with Remote Management (one of the updates from yesterday, 5.21) and Java (yesterday too). MacBook Pro OS X 10.6.8, would like to go to Lion but don't want to until my machine is stable?
Info:
MacBook Pro (13-inch Mid 2009), Mac OS X (10.6.8)
My Mac Pro (late 2006) now has kernel panics at startup. Problem first happened while computer was in sleep mode, a second kernel panic happened about 10-15 minutes after reboot the first time. Now it happens at startup every time. Zapped PRAM multiple times to no effect. Tested original 10.4 install disk, as well as 10.5 and 10.6 upgrade disks with all external connections removed and from a cold boot. The 10.4 disk causes the kernel panic every time. The 10.5 and 10.6 disks do too, if the C or D key is depressed. The upgrade disks will hang in a gray screen (10.6) or pale blue screen (10.5) with no keys depressed--computer keeps running but fails to boot. Also tested the RAM (4 X 512 MB) in different combinations of one pair in the top riser board (and switched risers, and removed lower board completely). All resulted in kernel panics. Next option?
View 10 Replies View RelatedI recently decieded to step into the adventure that is world of warcraft, and I have experienced kernel panics once every two hours or so of playing. I wonder if my ram is sliding out of place, or i should reinstall w.o.w. If it helps any, when I restart my macbook, it tells me a bunch of seemingly random coding as well as mentioning world of warcraft.
View 15 Replies View RelatedSince yesterday I have not been able to boot normally into Leopard. I had just switched of my ADSL modem and the computer froze after that it never boots in normal mode. I am in safe mode, the audio does not work in safe mode, everything is working. I am attaching the crash report in text format. I did try to boot after removing all the peripherals, also tried to reinstall but the computer does not accept the install disk , just ejects them. I am in real trouble now, suggestions are welcome. I am using a PowerPC machine specs PowerMac G5 1.6ghz with 1.25 GB RAM running OS X 10.5.5
View 5 Replies View RelatedI'm trying to fix my iMac. I am getting a kernel panic from start up! I've tried troubleshooting from the apple website. I've tried holding C. I only have two disk. Mac OS S install disc 1 & 2. I've tried holding Control, Option, R, and P.
View 5 Replies View RelatedI recently upgraded to OS 10.5 on two desktops. The PowerMac Intel works fine. The G5 Quad seems to be having weekly kernel panics and frequent software crashes (an example yesterday: Word and Safari were open. After a few minutes of no keyboard input whilst reading a webpage, Word crashed, followed by Safari). Running Maya seems to cause the kernel panics. It did so, once in a while, on OX 10.4, but with 10.5 it's become a frequent occurrence. Calling Apple (still on Applecare) doesn't help. They run some diagnostics and can't pinpoint anything. Clearly if they don't recognize the problem, they can't fix it. (I also run Maya on the PowerMac Intel with no problems, so Maya isn't the problem.)
Realplayer, streaming, has been playing during some of these occurrences — is this a known culprit? Any suggestions? Was the G5 Quad just a bad model? Can I turn off whatever causes the kernel panic alerts that freeze my computer? Should I be demanding more out of Applecare — is there anything I should expect them to replace? Should I downgrade to OS 10.4? If so, how do I do this? Many questions I know...
I have a 2 GHz Intel Core Duo MacBook with 1GB of SDRAM. I have OS X Tiger v. 10.4.6, and I just recieved Leopard v. 10.5.4, and I am attempting to install it. If it makes any difference, I have my harddrive partitioned - 40GB for OS X, and 30GB for Ubuntu Linux (8.10 Intrepid Ibex), and rEFIt to switch between the two. I booted into Tiger and popped in the Leopard installation DVD. A window popped open with an icon to install Leopard. I double clicked on this, and it told me to restart. So, I pressed the restart button in the window, and the computer restarted, automatically booting into the OSX DVD.
The Apple logo popped up, with the little spinning wheel. It churned for a few minutes, then it had a kernel panic: So, I did as the notification told me, and restarted. It automatically booted into the DVD again, and the same thing happened. Next time, as a booted up, I held the eject key down, and I was able to get the DVD out. So, I'm back to where I started, but I don't have Leopard installed. There are several minor scratches on the DVD, but nothing I would expect to mess with the DVD. Another thing: I popped in the Leopard DVD, and opened the Disk Utility after this fiasco, and verified the DVD. I got this error output:
Code:
Verifying volume "disk1s3"
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Invalid node structure
The volume Mac OS X Install DVD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
However, the "Repair Disk" button is greyed out. I don't want to go through the Apple Support Hotline.
I'm running a PowerBook G4 and I have recently run into some problems with kernel panic. I have bought and installed new ram, zapped the pram, and re-written the hard drive and I still have problems. The weird thing is, the computer only crashes when I move it. If I just sit still then it works fine, but if I move it from my lap to a table or something like that then I get the restart message. I have an appointment with the Geek bar tomorrow
View 8 Replies View RelatedI have a 2 year old imac that was working fine until last night. I had just installed the "raw photo compatibility" update (although i think this is just coincidence) and shut my computer down.
When i booted it up again 3 hours later, i got to my desktop but instead of seeing my usual 3 partitions (macintosh, home, windows xp) I only saw 2 - windows xp was missing. Not only this but my system was continuously beachballing.
I was unable to force quit so after a few minutes i held in the power button for 4 seconds until it shut down. Upon reboot, i was (and still am) only able to get to the white screen with apple logo that you get on boot up. On this screen you have a little gear spinning round. This spins for some time then just as my computer would usually boot into the O/S, the gear stops and it hangs.
I am running the latest version of Leopard and so far i have:
Tried diagnostics mode - all diagnostics come back ok, even in extended test
Single user mode - tried FSCK to repair, first time it made changes to drive, after that nothing.
Tried safe mode - wont boot
Tried booting from leopard cd - still hangs in same place
Tried booting from tiger on an external hdd - at same place it usually hangs, it kernel panics instead
Swapped ram out - exactly the same problem when using someone elses ram
Well I had a kernel panic yesterday and now im stuck at start up becuase everytime I reboot the computer it takes me to the kernel panic and I tried to boot in single user mode and tried to do fsck repair but when I booted in single user mode it just stoped loading at system uptime in nano seconds: 753286880 and then I tried to boot in safe mode but had no luck it didnt even go in safe mode it just went straight to the kernel panic I also already zaped the pram but still no luck and I dont have the mac OS X install disks.
View 1 Replies View RelatedI'm having a weird problem with a 15" I bought in February (2009). I can boot up fine into the OS without any problems. But when I try to boot from the reinstallation CD to do a clean install, I keep getting a kernel panic. (And yes, I do need to do a clean install.)
View 2 Replies View Related